flashrom

flashrom@flashrom.org

3 participants
9189 discussions

Support for Nvidia chips
by Joe Pea 20 Nov '10

20 Nov '10

I tried flashrom and it said there's no support for my chip :( This is the output of flashrom -V: flashrom v0.9.2-r1001 on Linux 2.6.35-ARCH (x86_64), built with libpci 3.1.7, GCC 4.5.0 20100520 (prerelease) flashrom is free software, get the source code at http://www.flashrom.org Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "BIOSTAR Group" DMI string system-product-name: "N61PB-M2S" DMI string system-version: " " DMI string baseboard-manufacturer: "BIOSTAR Group" DMI string baseboard-product-name: "N61PB-M2S" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8716 Found chipset "NVIDIA MCP61", enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Guessed flash bus type is SPI Found SMBus device 10de:03eb at 00:01:1 SPI BAR is at 0xfec80000, after clearing low bits BAR is at 0xfec80000 SPI control is 0x000a, enable=0, idle=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. SPI on this chipset is not supported yet. OK. This chipset supports the following protocols: None. No IT87* serial flash segment enabled. Calibrating delay loop... 1454M loops per second, 10 myus = 10 us, 100 myus = 102 us, 1000 myus = 1010 us, 10000 myus = 10017 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for EON unknown EON SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. Can we get it working? -= Joe Pea =-

2 1

Breaking the assumption that filesize == romsize
by Richard Smith 18 Nov '10

18 Nov '10

Current flashrom forces that the loaded filesize must equal the romsize. If you are using an external programmer then this may not be true. How deeply wired is this assumption? I'd like to bypass those checks it if the -p option is used. -- Richard A. Smith

4 5

[PATCH 0/5] ft2232_spi: OpenMoko DebugBoard support
by Alex Badea 18 Nov '10

18 Nov '10

Hi, This patch series adds support for the OpenMoko DebugBoard V2+, which is based on the FT2232D. A few fixes were required to make it work. Any feedback is greatly appreciated, this is my first contribution to flashrom. Thanks. Alex Badea (5): ft2232_spi: don't hardcode USB VID ft2232_spi: add support for the OpenMoko DebugBoard V2+ ft2232_spi: allow CLOCK_X5 to be set at runtime ft2232_spi: retry short reads ft2232_spi: flag OpenMoko DebugBoard as tested ft2232_spi.c | 67 ++++++++++++++++++++++++++++++++++++++-------------------- 1 files changed, 44 insertions(+), 23 deletions(-)

3 16

[PATCH] Fix IDSEL handling in WPCE775X
by Carl-Daniel Hailfinger 17 Nov '10

17 Nov '10

Fix IDSEL handling in WPCE775X. - Clean up the code - Check that SHM window 2 is reachable if FWH communication is used - IDSEL is 4 bits, use a mask to extract it correctly - IDSEL setup needs to happen before SHM window 2 is accessed if FWH communication is used Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> diff --git a/wpce775x.c b/wpce775x.c index a659893..1407977 100644 --- a/wpce775x.c +++ b/wpce775x.c @@ -164,12 +164,13 @@ static int nuvoton_get_sio_index(uint16_t *port) /** Call superio to get pre-configured WCB address. * Read LDN 0x0f (SHM) idx:f8-fb (little-endian). */ -static int get_shaw2ba(chipaddr *shaw2ba) +static int get_shaw2ba(chipaddr *shaw2ba, uint8_t *comm_fwh) { uint16_t idx; uint8_t org_ldn; uint8_t win_cfg; uint8_t shm_cfg; + int ret = 0; if (nuvoton_get_sio_index(&idx) < 0) return -1; @@ -196,27 +197,40 @@ static int get_shaw2ba(chipaddr *shaw2ba) */ win_cfg = sio_read(idx, WPCE775X_WIN_CFG); if (win_cfg & WPCE775X_WIN_CFG_SHWIN_ACC) { - uint8_t idsel; - /* Make sure shared BIOS memory is enabled */ shm_cfg = sio_read(idx, WPCE775X_SHM_CFG); - if ((shm_cfg & WPCE775X_SHM_CFG_BIOS_FWH_EN)) - idsel = 0xf; - else { + if (!(shm_cfg & WPCE775X_SHM_CFG_BIOS_FWH_EN)) { msg_cdbg("Shared BIOS memory is diabled.\n"); msg_cdbg("Please check SHM_CFG:BIOS_FWH_EN.\n"); - goto error; + ret = -1; + goto out; } - - *shaw2ba &= 0x0fffffff; - *shaw2ba |= idsel << 28; + /* FIXME: Check that this is a FWH capable chipset. */ + comm_fwh = 1; + /* Check if bit 24-27 are set. Intel ICH will never issue any + * LPC firmware memory (FWH) cycles with them cleared. + * FWH cycles only have 28 address bits. + */ + if (*shaw2ba & (0xf << 24) != 0xf << 24) { + msg_cerr("WPCE775X shadow window 2 is outside the " + "region addressable with FWH!\n"); + ret = -1; + goto out; + } + /* FWH cycles are only issued for memory mapped to the top + * 16 MB of the 4 GB address space. We could set only the top + * 4 bits since those are ignored by the WPCE775X and we checked + * bits 24-27 to be 0xf above, but setting the top 8 bits makes + * the 16 MB constraint more clear. + */ + *shaw2ba |= 0xff << 24; + } else { + *comm_fwh = 0; } - - sio_write(idx, NUVOTON_SIOCFG_LDN, org_ldn); - return 0; -error: + +out: sio_write(idx, NUVOTON_SIOCFG_LDN, org_ldn); - return -1; + return ret; } /* Call superio to get pre-configured fwh_id. @@ -232,7 +246,8 @@ static int get_fwh_id(uint8_t *fwh_id) org_ldn = sio_read(idx, NUVOTON_SIOCFG_LDN); sio_write(idx, NUVOTON_SIOCFG_LDN, NUVOTON_LDN_SHM); - *fwh_id = sio_read(idx, WPCE775X_SHM_CFG); + /* Upper 4 bits of WPCE775X_SHM_CFG store the FWH ID. */ + *fwh_id = sio_read(idx, WPCE775X_SHM_CFG) >> 4; sio_write(idx, NUVOTON_SIOCFG_LDN, org_ldn); return 0; @@ -402,6 +417,7 @@ int probe_wpce775x(struct flashchip *flash) uint16_t sio_port; uint8_t srid; uint8_t fwh_id; + uint8_t comm_fwh = 0; uint32_t size; chipaddr original_memory; uint32_t original_size; @@ -425,14 +441,29 @@ int probe_wpce775x(struct flashchip *flash) } /* get the address of Shadow Window 2. */ - if (get_shaw2ba(&wcb_physical_address) < 0) { + if (get_shaw2ba(&wcb_physical_address, &comm_fwh) < 0) { msg_cdbg("Cannot get the address of Shadow Window 2"); return 0; } msg_cdbg("Get the address of WCB(SHA WIN2) at 0x%08x\n", (uint32_t)wcb_physical_address); - wcb = (struct wpce775x_wcb *) - programmer_map_flash_region("WPCE775X WCB", + + /* If we use FWH for Shadow Window 2, we have to set FWH IDSEL in the + * chipset before we try to access Shadow Window 2. + */ + if (comm_fwh) { + if (get_fwh_id(&fwh_id) < 0) { + msg_cdbg("Cannot get fwh_id value.\n"); + return 0; + } + msg_cdbg("get fwh_id: 0x%02x\n", fwh_id); + + /* TODO: set fwh_idsel of chipset. + * Currently, we employ "-p internal:fwh_idsel=0x0000223e". + */ + } + + wcb = (struct wpce775x_wcb *)physmap("WPCE775X WCB", wcb_physical_address, getpagesize() /* min page size */); msg_cdbg("mapped wcb address: %p for physical addr: 0x%08lx\n", wcb, wcb_physical_address); @@ -442,15 +473,6 @@ int probe_wpce775x(struct flashchip *flash) } memset((void*)wcb, 0, sizeof(*wcb)); - if (get_fwh_id(&fwh_id) < 0) { - msg_cdbg("Cannot get fwh_id value.\n"); - return 0; - } - msg_cdbg("get fwh_id: 0x%02x\n", fwh_id); - - /* TODO: set fwh_idsel of chipset. - Currently, we employ "-p internal:fwh_idsel=0x0000223e". */ - /* Initialize the parameters of EC SHM component */ if (InitFlash(0x00)) return 0; -- http://www.hailfinger.org/

1 2

[commit] r1234 - trunk
by repository service 16 Nov '10

16 Nov '10

Author: hailfinger Date: Tue Nov 16 22:25:29 2010 New Revision: 1234 URL: http://flashrom.org/trac/flashrom/changeset/1234 Log: Support bulk read on Dediprog SF100. Should result in native speed for plain read and erase. Should result in a measurable speedup for writes due to a fast verify. Packet size is 512 bytes. Depending on your USB hardware and the Dediprog firmware version, this may not work at all. That said, it worked on the hardware we tested. Add lots of error checking where it was missing before. Thanks to Richard A. Smith, Mathias Krause and David Hendricks for testing multiple iterations of this patch. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-By: Richard A. Smith <richard(a)laptop.org> Acked-By: Mathias Krause <mathias.krause(a)secunet.com> Modified: trunk/dediprog.c Modified: trunk/dediprog.c ============================================================================== --- trunk/dediprog.c Tue Nov 16 18:21:58 2010 (r1233) +++ trunk/dediprog.c Tue Nov 16 22:25:29 2010 (r1234) @@ -27,6 +27,7 @@ #define DEFAULT_TIMEOUT 3000 static usb_dev_handle *dediprog_handle; +static int dediprog_endpoint; #if 0 /* Might be useful for other pieces of code as well. */ @@ -148,11 +149,93 @@ } #endif +/* Bulk read interface, will read multiple 512 byte chunks aligned to 512 bytes. + * @start start address + * @len length + * @return 0 on success, 1 on failure + */ +static int dediprog_spi_bulk_read(struct flashchip *flash, uint8_t *buf, + int start, int len) +{ + int ret; + int i; + /* chunksize must be 512, other sizes will NOT work at all. */ + const int chunksize = 0x200; + const int count = len / chunksize; + const char count_and_chunk[] = {count & 0xff, + (count >> 8) & 0xff, + chunksize & 0xff, + (chunksize >> 8) & 0xff}; + + if ((start % chunksize) || (len % chunksize)) { + msg_perr("%s: Unaligned start=%i, len=%i! Please report a bug " + "at flashrom(a)flashrom.org\n", __func__, start, len); + return 1; + } + + /* No idea if the hardware can handle empty reads, so chicken out. */ + if (!len) + return 0; + /* Command Read SPI Bulk. No idea which read command is used on the + * SPI side. + */ + ret = usb_control_msg(dediprog_handle, 0x42, 0x20, start % 0x10000, + start / 0x10000, (char *)count_and_chunk, + sizeof(count_and_chunk), DEFAULT_TIMEOUT); + if (ret != sizeof(count_and_chunk)) { + msg_perr("Command Read SPI Bulk failed, %i %s!\n", ret, + usb_strerror()); + return 1; + } + + for (i = 0; i < count; i++) { + ret = usb_bulk_read(dediprog_handle, 0x80 | dediprog_endpoint, + (char *)buf + i * chunksize, chunksize, + DEFAULT_TIMEOUT); + if (ret != chunksize) { + msg_perr("SPI bulk read %i failed, expected %i, got %i " + "%s!\n", i, chunksize, ret, usb_strerror()); + return 1; + } + } + + return 0; +} + int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) { - msg_pspew("%s, start=0x%x, len=0x%x\n", __func__, start, len); - /* Chosen read length is 16 bytes for now. */ - return spi_read_chunked(flash, buf, start, len, 16); + int ret; + /* chunksize must be 512, other sizes will NOT work at all. */ + const int chunksize = 0x200; + int residue = start % chunksize ? chunksize - start % chunksize : 0; + int bulklen; + + if (residue) { + msg_pdbg("Slow read for partial block from 0x%x, length 0x%x\n", + start, residue); + ret = spi_read_chunked(flash, buf, start, residue, 16); + if (ret) + return ret; + } + + /* Round down. */ + bulklen = (len - residue) / chunksize * chunksize; + ret = dediprog_spi_bulk_read(flash, buf + residue, start + residue, + bulklen); + if (ret) + return ret; + + len -= residue + bulklen; + if (len) { + msg_pdbg("Slow read for partial block from 0x%x, length 0x%x\n", + start, len); + ret = spi_read_chunked(flash, buf + residue + bulklen, + start + residue + bulklen, len, 16); + if (ret) + return ret; + } + + return 0; } int dediprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, @@ -345,6 +428,7 @@ struct usb_device *dev; char *voltage; int millivolt = 3500; + int ret; msg_pspew("%s\n", __func__); @@ -371,8 +455,23 @@ dev->descriptor.idVendor, dev->descriptor.idProduct); dediprog_handle = usb_open(dev); - usb_set_configuration(dediprog_handle, 1); - usb_claim_interface(dediprog_handle, 0); + ret = usb_set_configuration(dediprog_handle, 1); + if (ret < 0) { + msg_perr("Could not set USB device configuration: %i %s\n", + ret, usb_strerror()); + if (usb_close(dediprog_handle)) + msg_perr("Could not close USB device!\n"); + return 1; + } + ret = usb_claim_interface(dediprog_handle, 0); + if (ret < 0) { + msg_perr("Could not claim USB device interface %i: %i %s\n", + 0, ret, usb_strerror()); + if (usb_close(dediprog_handle)) + msg_perr("Could not close USB device!\n"); + return 1; + } + dediprog_endpoint = 2; /* URB 6. Command A. */ if (dediprog_command_a()) return 1; @@ -461,8 +560,12 @@ if (dediprog_set_spi_voltage(0x0)) return 1; + if (usb_release_interface(dediprog_handle, 0)) { + msg_perr("Could not release USB interface!\n"); + return 1; + } if (usb_close(dediprog_handle)) { - msg_perr("Couldn't close USB device!\n"); + msg_perr("Could not close USB device!\n"); return 1; } return 0;

1 0

[PATCH] Support Dediprog SF100 bulk read
by Carl-Daniel Hailfinger 16 Nov '10

16 Nov '10

Support Dediprog SF100 bulk read. Packet size is 512 bytes. Depending on your USB hardware and the Dediprog firmware version, this may not work at all. Untested, experimental, may hang/crash the programmer. Read tests of random images are appreciated. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-dediprog_read_bulk/dediprog.c =================================================================== --- flashrom-dediprog_read_bulk/dediprog.c (Revision 1225) +++ flashrom-dediprog_read_bulk/dediprog.c (Arbeitskopie) @@ -26,6 +26,7 @@ #define DEFAULT_TIMEOUT 3000 static usb_dev_handle *dediprog_handle; +static int dediprog_endpoint; #if 0 /* Might be useful for other pieces of code as well. */ @@ -148,9 +149,36 @@ int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) { + int ret; + int i; + int chunksize = 0x200; /* 512 */ + int count = flash->total_size * 1024 / chunksize; + /* Guessed. */ + const char count_and_chunk[] = {(count >> 8) & 0xff, + count & 0xff, + (chunksize >> 8) & 0xff, + chunksize & 0xff}; + msg_pspew("%s, start=0x%x, len=0x%x\n", __func__, start, len); - /* Chosen read length is 16 bytes for now. */ - return spi_read_chunked(flash, buf, start, len, 16); + if ((len != flash->total_size * 1024) || (start != 0)) { + msg_perr("Only a full chip read is supported for now. Wanted " + "start=%i, length=%i\n.", start, len); + return 1; + } + + /* Command Read SPI Bulk. No idea which read command is used on the SPI side. */ + usb_control_msg(dediprog_handle, 0x42, 0x20, 0x0000, 0x0000, (char *)count_and_chunk, 0x0004, DEFAULT_TIMEOUT); + + for (i = 0; i < count; i++) { + ret = usb_bulk_read(dediprog_handle, dediprog_endpoint, (char *)buf + i * chunksize, chunksize, DEFAULT_TIMEOUT); + if (ret != chunksize) { + msg_perr("SPI bulk read failed, expected %i, got %i %s!\n", + chunksize, ret, usb_strerror()); + return 1; + } + } + + return 0; } int dediprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, @@ -301,6 +329,7 @@ dediprog_handle = usb_open(dev); usb_set_configuration(dediprog_handle, 1); usb_claim_interface(dediprog_handle, 0); + dediprog_endpoint = 2; /* URB 6. Command A. */ if (dediprog_command_a()) return 1; -- http://www.hailfinger.org/

4 14

[PATCH] Use large reads for verify
by Carl-Daniel Hailfinger 16 Nov '10

16 Nov '10

verify_range() and check_erased_range() check each page separately. While that may have seemed like a good idea back when the code was introduced, it has no benefits for any of the chips where we support write because all of them handle cross-page reads nicely. The only class of chips where this change could be a problem is chips with non power of two sector sizes which have gaps in the address space. We could simply require their read functions to provide gap-free results and leave it at that. This patch should speed up verify on Dediprog by a factor of ~100. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-verify_not_chunked/flashrom.c =================================================================== --- flashrom-verify_not_chunked/flashrom.c (Revision 1232) +++ flashrom-verify_not_chunked/flashrom.c (Arbeitskopie) @@ -726,9 +726,8 @@ */ int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, char *message) { - int i, j, starthere, lenhere, ret = 0; - int page_size = flash->page_size; - uint8_t *readbuf = malloc(page_size); + int i, ret = 0; + uint8_t *readbuf = malloc(len); int failcount = 0; if (!len) @@ -753,37 +752,21 @@ if (!message) message = "VERIFY"; - /* Warning: This loop has a very unusual condition and body. - * The loop needs to go through each page with at least one affected - * byte. The lowest page number is (start / page_size) since that - * division rounds down. The highest page number we want is the page - * where the last byte of the range lives. That last byte has the - * address (start + len - 1), thus the highest page number is - * (start + len - 1) / page_size. Since we want to include that last - * page as well, the loop condition uses <=. - */ - for (i = start / page_size; i <= (start + len - 1) / page_size; i++) { - /* Byte position of the first byte in the range in this page. */ - starthere = max(start, i * page_size); - /* Length of bytes in the range in this page. */ - lenhere = min(start + len, (i + 1) * page_size) - starthere; - ret = flash->read(flash, readbuf, starthere, lenhere); - if (ret) { - msg_gerr("Verification impossible because read failed " - "at 0x%x (len 0x%x)\n", starthere, lenhere); - break; + ret = flash->read(flash, readbuf, start, len); + if (ret) { + msg_gerr("Verification impossible because read failed " + "at 0x%x (len 0x%x)\n", start, len); + } + + for (i = 0; i < len; i++) { + if (cmpbuf[i] != readbuf[i]) { + /* Only print the first failure. */ + if (!failcount++) + msg_cerr("%s FAILED at 0x%08x! " + "Expected=0x%02x, Read=0x%02x,", + message, start + i, cmpbuf[i], + readbuf[i]); } - for (j = 0; j < lenhere; j++) { - if (cmpbuf[starthere - start + j] != readbuf[j]) { - /* Only print the first failure. */ - if (!failcount++) - msg_cerr("%s FAILED at 0x%08x! " - "Expected=0x%02x, Read=0x%02x,", - message, starthere + j, - cmpbuf[starthere - start + j], - readbuf[j]); - } - } } if (failcount) { msg_cerr(" failed byte count from 0x%08x-0x%08x: 0x%x\n", -- http://www.hailfinger.org/

3 4

[commit] r1233 - trunk
by repository service 16 Nov '10

16 Nov '10

Author: hailfinger Date: Tue Nov 16 18:21:58 2010 New Revision: 1233 URL: http://flashrom.org/trac/flashrom/changeset/1233 Log: Read the to-be-verified area in one go. verify_range() and check_erased_range() check each page separately. While that may have seemed like a good idea back when the code was introduced, it has no benefits for any of the chips where we support write because all of them handle cross-page reads nicely. The only class of chips where this change could be a problem is chips with non power of two sector sizes which have gaps in the address space. We simply require their read functions to provide gap-free results and leave it at that. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-By: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/flashrom.c Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Wed Nov 10 16:25:18 2010 (r1232) +++ trunk/flashrom.c Tue Nov 16 18:21:58 2010 (r1233) @@ -726,9 +726,8 @@ */ int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, char *message) { - int i, j, starthere, lenhere, ret = 0; - int page_size = flash->page_size; - uint8_t *readbuf = malloc(page_size); + int i, ret = 0; + uint8_t *readbuf = malloc(len); int failcount = 0; if (!len) @@ -753,36 +752,21 @@ if (!message) message = "VERIFY"; - /* Warning: This loop has a very unusual condition and body. - * The loop needs to go through each page with at least one affected - * byte. The lowest page number is (start / page_size) since that - * division rounds down. The highest page number we want is the page - * where the last byte of the range lives. That last byte has the - * address (start + len - 1), thus the highest page number is - * (start + len - 1) / page_size. Since we want to include that last - * page as well, the loop condition uses <=. - */ - for (i = start / page_size; i <= (start + len - 1) / page_size; i++) { - /* Byte position of the first byte in the range in this page. */ - starthere = max(start, i * page_size); - /* Length of bytes in the range in this page. */ - lenhere = min(start + len, (i + 1) * page_size) - starthere; - ret = flash->read(flash, readbuf, starthere, lenhere); - if (ret) { - msg_gerr("Verification impossible because read failed " - "at 0x%x (len 0x%x)\n", starthere, lenhere); - break; - } - for (j = 0; j < lenhere; j++) { - if (cmpbuf[starthere - start + j] != readbuf[j]) { - /* Only print the first failure. */ - if (!failcount++) - msg_cerr("%s FAILED at 0x%08x! " - "Expected=0x%02x, Read=0x%02x,", - message, starthere + j, - cmpbuf[starthere - start + j], - readbuf[j]); - } + ret = flash->read(flash, readbuf, start, len); + if (ret) { + msg_gerr("Verification impossible because read failed " + "at 0x%x (len 0x%x)\n", start, len); + return ret; + } + + for (i = 0; i < len; i++) { + if (cmpbuf[i] != readbuf[i]) { + /* Only print the first failure. */ + if (!failcount++) + msg_cerr("%s FAILED at 0x%08x! " + "Expected=0x%02x, Read=0x%02x,", + message, start + i, cmpbuf[i], + readbuf[i]); } } if (failcount) {

1 0

Board enable needed: Gigabyte 6IEM
by Степанов Константин 16 Nov '10

16 Nov '10

11/02/2001-6IEM-6A69RG0HC-00 http://paste.flashrom.org/view.php?id=222 http://paste.flashrom.org/view.php?id=221 http://paste.flashrom.org/view.php?id=223

1 0

Ibex Peak hangs
by John 16 Nov '10

16 Nov '10

Here is my lspci: http://flashrom.pastebin.com/4zVD3z7S When attempting to read, the chipset is not detected. After editing chipset_enable.c, changing the "3b00" in '{0x8086, 0x3b02, NT, "Intel", "3400 Desktop", enable_flash_ich10}' to "3b02", the following is output, followed immediately by a hard freeze: http://flashrom.pastebin.com/jNBdZ4YC "sudo ./flashrom -VV -c SST25VF016B" output: http://flashrom.pastebin.com/UA4vBm52 After applying this patch: http://patchwork.coreboot.org/patch/1532/ the output of "sudo ./flashrom -VV -c SST25VF016B" is: http://flashrom.pastebin.com/rCEgShPk And the output of "sudo ./flashrom -VV" was another freeze and output identical to: http://flashrom.pastebin.com/jNBdZ4YC Carldani said to mention that "flashrom hangs the machine on RES/REMS probe after you add an ich10 chipset enable for PCI ID 8086:3b02". -- http://www.fastmail.fm - mmm... Fastmail...

2 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom