flashrom

flashrom@flashrom.org

5 participants
9161 discussions

Gigabyte GA-6VXE7 revision 3.0
by Nicholas Adrian 11 Nov '10

11 Nov '10

Your paste can be seen at http://paste.flashrom.org/view.php?id=202 Your upload can be seen at http://paste.flashrom.org/view.php?id=203

1 0

Successful write of SST SST25VF080B on EVGA X58 SLI motherboard
by Segfault 10 Nov '10

10 Nov '10

flashrom v0.9.3-r1225 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1393M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10026 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "OEM" DMI string system-product-name: "OEM" DMI string system-version: "OEM" DMI string baseboard-manufacturer: " EVGA " DMI string baseboard-product-name: "132-BL-E758" DMI string baseboard-version: "Tylersburg" DMI string chassis-type: "Desktop" Found chipset "Intel ICH10R", enabling flash write... chipset PCI ID is 8086:3a16, 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x3 Root Complex Register Block address = 0xfed1c000 GCS = 0x461: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) FLOCKDN 0, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-write 0x58: 0x00ff0005 (FREG1: BIOS) 0x00005000-0x000fffff is read-write 0x5C: 0x00040003 (FREG2: Management Engine) 0x00003000-0x00004fff is read-write 0x60: 0x00020001 (FREG3: Gigabit Ethernet) 0x00001000-0x00002fff is read-write 0x64: 0x00000fff (FREG4: Platform Data) 0x00fff000-0x00000fff is read-write 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x007f1004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x462b (OPTYPE) 0x98: 0x05ab0302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00000004 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BN/BX-B, 128 KB: skipped. Probing for Intel 28F001BN/BX-T, 128 KB: skipped. Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: skipped. Probing for Intel 28F008S3/S5/SC, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x33, id2 0xc9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x60, id2 0xc3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x33, id2 0xc9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Spansion S25FL032A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Spansion S25FL064A, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x8e Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for SST SST25LF040A.RES, 512 KB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0xbf, id2 0x8e Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x8e Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Chip status register is 00 Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Auto Address Increment Programming (AAI) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "SST SST25VF080B" (1024 KB, SPI) at physical address 0xfff00000. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x60, id2 0xc3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x70, id2 0xff, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x33, id2 0xc9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x33, id2 0xc9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x33, id2 0xc9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x33, id2 0xc9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x60, id2 0xc3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x33, id2 0xc9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x33, id2 0xc9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x60, id2 0xc3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x33, id2 0xc9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xbf, id2 0x8e === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Flash image seems to be a legacy BIOS. Disabling checks. Reading old flash chip contents... Erasing and writing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S, 0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S, 0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S, 0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S, 0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S, 0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S, 0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S, 0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S, 0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S, 0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S, 0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S, 0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S, 0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S, 0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S, 0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S, 0x090000-0x090fff:S, 0x091000-0x091fff:S, 0x092000-0x092fff:S, 0x093000-0x093fff:S, 0x094000-0x094fff:S, 0x095000-0x095fff:S, 0x096000-0x096fff:S, 0x097000-0x097fff:S, 0x098000-0x098fff:S, 0x099000-0x099fff:S, 0x09a000-0x09afff:S, 0x09b000-0x09bfff:S, 0x09c000-0x09cfff:S, 0x09d000-0x09dfff:S, 0x09e000-0x09efff:S, 0x09f000-0x09ffff:S, 0x0a0000-0x0a0fff:S, 0x0a1000-0x0a1fff:S, 0x0a2000-0x0a2fff:S, 0x0a3000-0x0a3fff:S, 0x0a4000-0x0a4fff:S, 0x0a5000-0x0a5fff:S, 0x0a6000-0x0a6fff:S, 0x0a7000-0x0a7fff:S, 0x0a8000-0x0a8fff:S, 0x0a9000-0x0a9fff:S, 0x0aa000-0x0aafff:S, 0x0ab000-0x0abfff:S, 0x0ac000-0x0acfff:S, 0x0ad000-0x0adfff:S, 0x0ae000-0x0aefff:S, 0x0af000-0x0affff:S, 0x0b0000-0x0b0fff:S, 0x0b1000-0x0b1fff:S, 0x0b2000-0x0b2fff:S, 0x0b3000-0x0b3fff:S, 0x0b4000-0x0b4fff:S, 0x0b5000-0x0b5fff:S, 0x0b6000-0x0b6fff:S, 0x0b7000-0x0b7fff:S, 0x0b8000-0x0b8fff:S, 0x0b9000-0x0b9fff:S, 0x0ba000-0x0bafff:S, 0x0bb000-0x0bbfff:S, 0x0bc000-0x0bcfff:S, 0x0bd000-0x0bdfff:S, 0x0be000-0x0befff:S, 0x0bf000-0x0bffff:S, 0x0c0000-0x0c0fff:S, 0x0c1000-0x0c1fff:S, 0x0c2000-0x0c2fff:S, 0x0c3000-0x0c3fff:S, 0x0c4000-0x0c4fff:S, 0x0c5000-0x0c5fff:S, 0x0c6000-0x0c6fff:S, 0x0c7000-0x0c7fff:S, 0x0c8000-0x0c8fff:S, 0x0c9000-0x0c9fff:S, 0x0ca000-0x0cafff:S, 0x0cb000-0x0cbfff:S, 0x0cc000-0x0ccfff:S, 0x0cd000-0x0cdfff:S, 0x0ce000-0x0cefff:S, 0x0cf000-0x0cffff:S, 0x0d0000-0x0d0fff:S, 0x0d1000-0x0d1fff:S, 0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S, 0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S, 0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S, 0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S, 0x0de000-0x0defff:S, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S, 0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S, 0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S, 0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S, 0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S, 0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S, 0x0f0000-0x0f0fff:S, 0x0f1000-0x0f1fff:S, 0x0f2000-0x0f2fff:S, 0x0f3000-0x0f3fff:S, 0x0f4000-0x0f4fff:S, 0x0f5000-0x0f5fff:S, 0x0f6000-0x0f6fff:S, 0x0f7000-0x0f7fff:S, 0x0f8000-0x0f8fff:S, 0x0f9000-0x0f9fff:S, 0x0fa000-0x0fafff:S, 0x0fb000-0x0fbfff:S, 0x0fc000-0x0fcfff:S, 0x0fd000-0x0fdfff:S, 0x0fe000-0x0fefff:S, 0x0ff000-0x0fffff:S Done. Verifying flash... VERIFIED.

1 0

chip support
by Василий Вылегжанин 10 Nov '10

10 Nov '10

Successfully flashed my boards and here are logs attached. Gigabyte EP35-DS3L and ECS 945GCT-M5.

1 0

[commit] r1232 - trunk
by repository service 10 Nov '10

10 Nov '10

Author: hailfinger Date: Wed Nov 10 16:25:18 2010 New Revision: 1232 URL: http://flashrom.org/trac/flashrom/changeset/1232 Log: Revert PCI config space writes on shutdown. This means all chipset enables etc. will be undone on shutdown. Reversible PCI config space writes now use rpci_write_*(). PCI config space writes which are one-shot (e.g. communication via config space) should continue to use the permanent pci_write_* variants. Extend the number of available register_shutdown slots to 32. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/atahpt.c trunk/chipset_enable.c trunk/drkaiser.c trunk/flashrom.c trunk/gfxnvidia.c trunk/pcidev.c trunk/programmer.h Modified: trunk/atahpt.c ============================================================================== --- trunk/atahpt.c Wed Nov 10 04:26:57 2010 (r1231) +++ trunk/atahpt.c Wed Nov 10 16:25:18 2010 (r1232) @@ -50,7 +50,7 @@ /* Enable flash access. */ reg32 = pci_read_long(pcidev_dev, REG_FLASH_ACCESS); reg32 |= (1 << 24); - pci_write_long(pcidev_dev, REG_FLASH_ACCESS, reg32); + rpci_write_long(pcidev_dev, REG_FLASH_ACCESS, reg32); buses_supported = CHIP_BUSTYPE_PARALLEL; @@ -59,13 +59,7 @@ int atahpt_shutdown(void) { - uint32_t reg32; - - /* Disable flash access again. */ - reg32 = pci_read_long(pcidev_dev, REG_FLASH_ACCESS); - reg32 &= ~(1 << 24); - pci_write_long(pcidev_dev, REG_FLASH_ACCESS, reg32); - + /* Flash access is disabled automatically by PCI restore. */ pci_cleanup(pacc); release_io_perms(); return 0; Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Wed Nov 10 04:26:57 2010 (r1231) +++ trunk/chipset_enable.c Wed Nov 10 16:25:18 2010 (r1232) @@ -47,7 +47,7 @@ */ tmp = pci_read_byte(dev, 0x47); tmp |= 0x46; - pci_write_byte(dev, 0x47, tmp); + rpci_write_byte(dev, 0x47, tmp); return 0; } @@ -58,7 +58,7 @@ tmp = pci_read_byte(dev, 0xd0); tmp |= 0xf8; - pci_write_byte(dev, 0xd0, tmp); + rpci_write_byte(dev, 0xd0, tmp); return 0; } @@ -72,7 +72,7 @@ new = pci_read_byte(dev, 0x40); new &= (~0x04); /* No idea why we clear bit 2. */ new |= 0xb; /* 0x3 for some chipsets, bit 7 seems to be don't care. */ - pci_write_byte(dev, 0x40, new); + rpci_write_byte(dev, 0x40, new); newer = pci_read_byte(dev, 0x40); if (newer != new) { msg_pinfo("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x40, new, name); @@ -160,7 +160,7 @@ new = pci_read_byte(sbdev, 0x45); new &= (~0x20); new |= 0x4; - pci_write_byte(sbdev, 0x45, new); + rpci_write_byte(sbdev, 0x45, new); newer = pci_read_byte(sbdev, 0x45); if (newer != new) { msg_pinfo("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x45, new, name); @@ -186,7 +186,7 @@ new = pci_read_byte(sbdev, 0x45); new &= (~0x80); new |= 0x40; - pci_write_byte(sbdev, 0x45, new); + rpci_write_byte(sbdev, 0x45, new); newer = pci_read_byte(sbdev, 0x45); if (newer != new) { msg_pinfo("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x45, new, name); @@ -233,7 +233,7 @@ if (new == old) return 0; - pci_write_word(dev, xbcs, new); + rpci_write_word(dev, xbcs, new); if (pci_read_word(dev, xbcs) != new) { msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", xbcs, new, name); @@ -269,7 +269,7 @@ if (new == old) return 0; - pci_write_byte(dev, bios_cntl, new); + rpci_write_byte(dev, bios_cntl, new); if (pci_read_byte(dev, bios_cntl) != new) { msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", bios_cntl, new, name); @@ -306,8 +306,8 @@ /* FIXME: Need to undo this on shutdown. */ msg_pinfo("\nSetting IDSEL=0x%x for top 16 MB", fwh_conf); - pci_write_long(dev, 0xd0, fwh_conf); - pci_write_word(dev, 0xd4, fwh_conf); + rpci_write_long(dev, 0xd0, fwh_conf); + rpci_write_word(dev, 0xd4, fwh_conf); /* FIXME: Decode settings are not changed. */ } else if (idsel) { msg_perr("Error: idsel= specified, but no number given.\n"); @@ -403,7 +403,7 @@ new = old & ~1; if (new != old) - pci_write_byte(dev, 0xd9, new); + rpci_write_byte(dev, 0xd9, new); buses_supported = CHIP_BUSTYPE_FWH; return 0; @@ -498,17 +498,6 @@ return enable_flash_ich_dc_spi(dev, name, 10); } -static void via_do_byte_merge(void * arg) -{ - struct pci_dev * dev = arg; - uint8_t val; - - msg_pdbg("Re-enabling byte merging\n"); - val = pci_read_byte(dev, 0x71); - val |= 0x40; - pci_write_byte(dev, 0x71, val); -} - static int via_no_byte_merge(struct pci_dev *dev, const char *name) { uint8_t val; @@ -518,8 +507,7 @@ { msg_pdbg("Disabling byte merging\n"); val &= ~0x40; - pci_write_byte(dev, 0x71, val); - register_shutdown(via_do_byte_merge, dev); + rpci_write_byte(dev, 0x71, val); } return NOT_DONE_YET; /* need to find south bridge, too */ } @@ -529,12 +517,12 @@ uint8_t val; /* enable ROM decode range (1MB) FFC00000 - FFFFFFFF */ - pci_write_byte(dev, 0x41, 0x7f); + rpci_write_byte(dev, 0x41, 0x7f); /* ROM write enable */ val = pci_read_byte(dev, 0x40); val |= 0x10; - pci_write_byte(dev, 0x40, val); + rpci_write_byte(dev, 0x40, val); if (pci_read_byte(dev, 0x40) != val) { msg_pinfo("\nWARNING: Failed to enable flash write on \"%s\"\n", @@ -546,7 +534,7 @@ /* All memory cycles, not just ROM ones, go to LPC. */ val = pci_read_byte(dev, 0x59); val &= ~0x80; - pci_write_byte(dev, 0x59, val); + rpci_write_byte(dev, 0x59, val); } return 0; @@ -580,12 +568,12 @@ reg8 |= LOWER_ROM_ADDRESS_RANGE; reg8 |= UPPER_ROM_ADDRESS_RANGE; reg8 |= ROM_WRITE_ENABLE; - pci_write_byte(dev, ROM_AT_LOGIC_CONTROL_REG, reg8); + rpci_write_byte(dev, ROM_AT_LOGIC_CONTROL_REG, reg8); /* Set positive decode on ROM. */ reg8 = pci_read_byte(dev, DECODE_CONTROL_REG2); reg8 |= BIOS_ROM_POSITIVE_DECODE; - pci_write_byte(dev, DECODE_CONTROL_REG2, reg8); + rpci_write_byte(dev, DECODE_CONTROL_REG2, reg8); reg8 = pci_read_byte(dev, CS5530_RESET_CONTROL_REG); if (reg8 & CS5530_ISA_MASTER) { @@ -649,7 +637,7 @@ { uint8_t new; - pci_write_byte(dev, 0x52, 0xee); + rpci_write_byte(dev, 0x52, 0xee); new = pci_read_byte(dev, 0x52); @@ -670,7 +658,7 @@ old = pci_read_byte(dev, 0x43); new = old | 0xC0; if (new != old) { - pci_write_byte(dev, 0x43, new); + rpci_write_byte(dev, 0x43, new); if (pci_read_byte(dev, 0x43) != new) { msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x43, new, name); } @@ -681,7 +669,7 @@ new = old | 0x01; if (new == old) return 0; - pci_write_byte(dev, 0x40, new); + rpci_write_byte(dev, 0x40, new); if (pci_read_byte(dev, 0x40) != new) { msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x40, new, name); @@ -709,7 +697,7 @@ (prot & 0xfffffc00), (prot & 0xfffffc00) + ((prot & 0x3ff) << 8)); prot &= 0xfffffffc; - pci_write_byte(dev, reg, prot); + rpci_write_byte(dev, reg, prot); prot = pci_read_long(dev, reg); if (prot & 0x3) msg_perr("SB600 %s%sunprotect failed from %u to %u\n", @@ -765,11 +753,11 @@ { uint8_t tmp; - pci_write_byte(dev, 0x92, 0); + rpci_write_byte(dev, 0x92, 0); tmp = pci_read_byte(dev, 0x6d); tmp |= 0x01; - pci_write_byte(dev, 0x6d, tmp); + rpci_write_byte(dev, 0x6d, tmp); return 0; } @@ -781,7 +769,7 @@ old = pci_read_byte(dev, 0x88); new = old | 0xc0; if (new != old) { - pci_write_byte(dev, 0x88, new); + rpci_write_byte(dev, 0x88, new); if (pci_read_byte(dev, 0x88) != new) { msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x88, new, name); } @@ -791,7 +779,7 @@ new = old | 0x01; if (new == old) return 0; - pci_write_byte(dev, 0x6d, new); + rpci_write_byte(dev, 0x6d, new); if (pci_read_byte(dev, 0x6d) != new) { msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x6d, new, name); @@ -835,12 +823,12 @@ /* Enable some SMBus stuff. */ tmp = pci_read_byte(smbusdev, 0x79); tmp |= 0x01; - pci_write_byte(smbusdev, 0x79, tmp); + rpci_write_byte(smbusdev, 0x79, tmp); /* Change southbridge. */ tmp = pci_read_byte(dev, 0x48); tmp |= 0x21; - pci_write_byte(dev, 0x48, tmp); + rpci_write_byte(dev, 0x48, tmp); /* Now become a bit silly. */ tmp = INB(0xc6f); @@ -862,19 +850,19 @@ /* Set the 0-16 MB enable bits. */ val = pci_read_byte(dev, 0x88); val |= 0xff; /* 256K */ - pci_write_byte(dev, 0x88, val); + rpci_write_byte(dev, 0x88, val); val = pci_read_byte(dev, 0x8c); val |= 0xff; /* 1M */ - pci_write_byte(dev, 0x8c, val); + rpci_write_byte(dev, 0x8c, val); wordval = pci_read_word(dev, 0x90); wordval |= 0x7fff; /* 16M */ - pci_write_word(dev, 0x90, wordval); + rpci_write_word(dev, 0x90, wordval); old = pci_read_byte(dev, 0x6d); new = old | 0x01; if (new == old) return 0; - pci_write_byte(dev, 0x6d, new); + rpci_write_byte(dev, 0x6d, new); if (pci_read_byte(dev, 0x6d) != new) { msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x6d, new, name); @@ -931,7 +919,7 @@ #if 0 val |= (1 << 6); val &= ~(1 << 5); - pci_write_byte(dev, 0x8a, val); + rpci_write_byte(dev, 0x8a, val); #endif if (mcp6x_spi_init(want_spi)) { @@ -954,11 +942,11 @@ /* Set the 4MB enable bit. */ val = pci_read_byte(dev, 0x41); val |= 0x0e; - pci_write_byte(dev, 0x41, val); + rpci_write_byte(dev, 0x41, val); val = pci_read_byte(dev, 0x43); val |= (1 << 4); - pci_write_byte(dev, 0x43, val); + rpci_write_byte(dev, 0x43, val); return 0; } Modified: trunk/drkaiser.c ============================================================================== --- trunk/drkaiser.c Wed Nov 10 04:26:57 2010 (r1231) +++ trunk/drkaiser.c Wed Nov 10 16:25:18 2010 (r1232) @@ -47,7 +47,7 @@ drkaiser_pcidev); /* Write magic register to enable flash write. */ - pci_write_word(pcidev_dev, PCI_MAGIC_DRKAISER_ADDR, + rpci_write_word(pcidev_dev, PCI_MAGIC_DRKAISER_ADDR, PCI_MAGIC_DRKAISER_VALUE); /* Map 128KB flash memory window. */ @@ -61,8 +61,7 @@ int drkaiser_shutdown(void) { - /* Write protect the flash again. */ - pci_write_word(pcidev_dev, PCI_MAGIC_DRKAISER_ADDR, 0); + /* Flash write is disabled automatically by PCI restore. */ pci_cleanup(pacc); release_io_perms(); return 0; Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Wed Nov 10 04:26:57 2010 (r1231) +++ trunk/flashrom.c Wed Nov 10 16:25:18 2010 (r1232) @@ -442,7 +442,7 @@ {}, /* This entry corresponds to PROGRAMMER_INVALID. */ }; -#define SHUTDOWN_MAXFN 4 +#define SHUTDOWN_MAXFN 32 static int shutdown_fn_count = 0; struct shutdown_func_data { void (*func) (void *data); Modified: trunk/gfxnvidia.c ============================================================================== --- trunk/gfxnvidia.c Wed Nov 10 04:26:57 2010 (r1231) +++ trunk/gfxnvidia.c Wed Nov 10 16:25:18 2010 (r1232) @@ -75,7 +75,7 @@ /* Allow access to flash interface (will disable screen). */ reg32 = pci_read_long(pcidev_dev, 0x50); reg32 &= ~(1 << 0); - pci_write_long(pcidev_dev, 0x50, reg32); + rpci_write_long(pcidev_dev, 0x50, reg32); nvidia_bar = physmap("NVIDIA", io_base_addr, 16 * 1024 * 1024); @@ -89,13 +89,9 @@ int gfxnvidia_shutdown(void) { - uint32_t reg32; - - /* Disallow access to flash interface (and re-enable screen). */ - reg32 = pci_read_long(pcidev_dev, 0x50); - reg32 |= (1 << 0); - pci_write_long(pcidev_dev, 0x50, reg32); - + /* Flash interface access is disabled (and screen enabled) automatically + * by PCI restore. + */ pci_cleanup(pacc); release_io_perms(); return 0; Modified: trunk/pcidev.c ============================================================================== --- trunk/pcidev.c Wed Nov 10 04:26:57 2010 (r1231) +++ trunk/pcidev.c Wed Nov 10 16:25:18 2010 (r1232) @@ -142,3 +142,73 @@ (devs[i].status == NT) ? " (untested)" : ""); } } + +enum pci_write_type { + pci_write_type_byte, + pci_write_type_word, + pci_write_type_long, +}; + +struct undo_pci_write_data { + struct pci_dev dev; + int reg; + enum pci_write_type type; + union { + uint8_t bytedata; + uint16_t worddata; + uint32_t longdata; + }; +}; + +void undo_pci_write(void *p) +{ + struct undo_pci_write_data *data = p; + msg_pdbg("Restoring PCI config space for %02x:%02x:%01x reg 0x%02x\n", + data->dev.bus, data->dev.dev, data->dev.func, data->reg); + switch (data->type) { + case pci_write_type_byte: + pci_write_byte(&data->dev, data->reg, data->bytedata); + break; + case pci_write_type_word: + pci_write_word(&data->dev, data->reg, data->worddata); + break; + case pci_write_type_long: + pci_write_long(&data->dev, data->reg, data->longdata); + break; + } + /* p was allocated in register_undo_pci_write. */ + free(p); +} + +#define register_undo_pci_write(a, b, c) \ +{ \ + struct undo_pci_write_data *undo_pci_write_data; \ + undo_pci_write_data = malloc(sizeof(struct undo_pci_write_data)); \ + undo_pci_write_data->dev = *a; \ + undo_pci_write_data->reg = b; \ + undo_pci_write_data->type = pci_write_type_##c; \ + undo_pci_write_data->c##data = pci_read_##c(dev, reg); \ + register_shutdown(undo_pci_write, undo_pci_write_data); \ +} + +#define register_undo_pci_write_byte(a, b) register_undo_pci_write(a, b, byte) +#define register_undo_pci_write_word(a, b) register_undo_pci_write(a, b, word) +#define register_undo_pci_write_long(a, b) register_undo_pci_write(a, b, long) + +int rpci_write_byte(struct pci_dev *dev, int reg, uint8_t data) +{ + register_undo_pci_write_byte(dev, reg); + return pci_write_byte(dev, reg, data); +} + +int rpci_write_word(struct pci_dev *dev, int reg, uint16_t data) +{ + register_undo_pci_write_word(dev, reg); + return pci_write_word(dev, reg, data); +} + +int rpci_write_long(struct pci_dev *dev, int reg, uint32_t data) +{ + register_undo_pci_write_long(dev, reg); + return pci_write_long(dev, reg, data); +} Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Wed Nov 10 04:26:57 2010 (r1231) +++ trunk/programmer.h Wed Nov 10 16:25:18 2010 (r1232) @@ -212,6 +212,12 @@ }; uint32_t pcidev_validate(struct pci_dev *dev, uint32_t bar, const struct pcidev_status *devs); uint32_t pcidev_init(uint16_t vendor_id, uint32_t bar, const struct pcidev_status *devs); +/* rpci_write_* are reversible writes. The original PCI config space register + * contents will be restored on shutdown. + */ +int rpci_write_byte(struct pci_dev *dev, int reg, u8 data); +int rpci_write_word(struct pci_dev *dev, int reg, u16 data); +int rpci_write_long(struct pci_dev *dev, int reg, u32 data); #endif /* print.c */

1 0

[PATCH] Undo all PCI writes on shutdown
by Carl-Daniel Hailfinger 10 Nov '10

10 Nov '10

Undo all PCI config space writes on shutdown. This means all chipset enables etc. will be undone on shutdown. Any writes which are one-shot should use the permanent ppci_write_* variants. Extend the number of available register_shutdown slots to 32. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-pci_configspace_shutdown_restore/drkaiser.c =================================================================== --- flashrom-pci_configspace_shutdown_restore/drkaiser.c (Revision 1225) +++ flashrom-pci_configspace_shutdown_restore/drkaiser.c (Arbeitskopie) @@ -61,8 +61,7 @@ int drkaiser_shutdown(void) { - /* Write protect the flash again. */ - pci_write_word(pcidev_dev, PCI_MAGIC_DRKAISER_ADDR, 0); + /* Flash write is disabled automatically by PCI restore. */ pci_cleanup(pacc); release_io_perms(); return 0; Index: flashrom-pci_configspace_shutdown_restore/pcidev.c =================================================================== --- flashrom-pci_configspace_shutdown_restore/pcidev.c (Revision 1225) +++ flashrom-pci_configspace_shutdown_restore/pcidev.c (Arbeitskopie) @@ -21,6 +21,7 @@ #include <stdlib.h> #include <string.h> #include "flash.h" +#define NO_PCI_REDIRECT 1 #include "programmer.h" uint32_t io_base_addr; @@ -90,7 +91,7 @@ uint32_t addr = 0, curaddr = 0; pacc = pci_alloc(); /* Get the pci_access structure */ - pci_init(pacc); /* Initialize the PCI library */ + pci_init(pacc); /* Initialize the PCI library */ pci_scan_bus(pacc); /* We want to get the list of devices */ pci_filter_init(pacc, &filter); @@ -142,3 +143,85 @@ (devs[i].status == NT) ? " (untested)" : ""); } } + +enum pci_write_type { + pci_write_type_byte, + pci_write_type_word, + pci_write_type_long, +}; + +struct undo_pci_write_data { + struct pci_dev dev; + int pos; + enum pci_write_type type; + union { + uint8_t bytedata; + uint16_t worddata; + uint32_t longdata; + }; +}; + +void undo_pci_write(void *p) +{ + struct undo_pci_write_data *data = p; + msg_pdbg("Restoring PCI config space for %02x:%02x:%01x pos 0x%02x\n", + data->dev.bus, data->dev.dev, data->dev.func, data->pos); + switch (data->type) { + case pci_write_type_byte: + pci_write_byte(&data->dev, data->pos, data->bytedata); + break; + case pci_write_type_word: + pci_write_word(&data->dev, data->pos, data->worddata); + break; + case pci_write_type_long: + pci_write_long(&data->dev, data->pos, data->longdata); + break; + } + /* p was allocated in register_undo_pci_write. */ + free(p); +} + +#define register_undo_pci_write(a, b, c) \ +{ \ + struct undo_pci_write_data *undo_pci_write_data; \ + undo_pci_write_data = malloc(sizeof(struct undo_pci_write_data)); \ + undo_pci_write_data->dev = *a; \ + undo_pci_write_data->pos = b; \ + undo_pci_write_data->type = pci_write_type_##c; \ + undo_pci_write_data->c##data = pci_read_##c(dev, pos); \ + register_shutdown(undo_pci_write, undo_pci_write_data); \ +} + +int rpci_write_byte(struct pci_dev *dev, int pos, uint8_t data) +{ + register_undo_pci_write(dev, pos, byte); + return pci_write_byte(dev, pos, data); +} + +int rpci_write_word(struct pci_dev *dev, int pos, uint16_t data) +{ + register_undo_pci_write(dev, pos, word); + return pci_write_word(dev, pos, data); +} + +int rpci_write_long(struct pci_dev *dev, int pos, uint32_t data) +{ + register_undo_pci_write(dev, pos, long); + return pci_write_long(dev, pos, data); +} + +int ppci_write_byte(struct pci_dev *dev, int pos, u8 data) +{ + return pci_write_byte(dev, pos, data); +} + +int ppci_write_word(struct pci_dev *dev, int pos, u16 data) +{ + return pci_write_word(dev, pos, data); +} + +int ppci_write_long(struct pci_dev *dev, int pos, u32 data) +{ + return pci_write_long(dev, pos, data); +} + Index: flashrom-pci_configspace_shutdown_restore/gfxnvidia.c =================================================================== --- flashrom-pci_configspace_shutdown_restore/gfxnvidia.c (Revision 1225) +++ flashrom-pci_configspace_shutdown_restore/gfxnvidia.c (Arbeitskopie) @@ -89,13 +89,9 @@ int gfxnvidia_shutdown(void) { - uint32_t reg32; - - /* Disallow access to flash interface (and re-enable screen). */ - reg32 = pci_read_long(pcidev_dev, 0x50); - reg32 |= (1 << 0); - pci_write_long(pcidev_dev, 0x50, reg32); - + /* Flash interface access is disabled (and screen enabled) automatically + * by PCI restore. + */ pci_cleanup(pacc); release_io_perms(); return 0; Index: flashrom-pci_configspace_shutdown_restore/atahpt.c =================================================================== --- flashrom-pci_configspace_shutdown_restore/atahpt.c (Revision 1225) +++ flashrom-pci_configspace_shutdown_restore/atahpt.c (Arbeitskopie) @@ -59,13 +59,7 @@ int atahpt_shutdown(void) { - uint32_t reg32; - - /* Disable flash access again. */ - reg32 = pci_read_long(pcidev_dev, REG_FLASH_ACCESS); - reg32 &= ~(1 << 24); - pci_write_long(pcidev_dev, REG_FLASH_ACCESS, reg32); - + /* Flash access is disabled automatically by PCI restore. */ pci_cleanup(pacc); release_io_perms(); return 0; Index: flashrom-pci_configspace_shutdown_restore/chipset_enable.c =================================================================== --- flashrom-pci_configspace_shutdown_restore/chipset_enable.c (Revision 1225) +++ flashrom-pci_configspace_shutdown_restore/chipset_enable.c (Arbeitskopie) @@ -498,17 +498,6 @@ return enable_flash_ich_dc_spi(dev, name, 10); } -static void via_do_byte_merge(void * arg) -{ - struct pci_dev * dev = arg; - uint8_t val; - - msg_pdbg("Re-enabling byte merging\n"); - val = pci_read_byte(dev, 0x71); - val |= 0x40; - pci_write_byte(dev, 0x71, val); -} - static int via_no_byte_merge(struct pci_dev *dev, const char *name) { uint8_t val; @@ -519,7 +508,6 @@ msg_pdbg("Disabling byte merging\n"); val &= ~0x40; pci_write_byte(dev, 0x71, val); - register_shutdown(via_do_byte_merge, dev); } return NOT_DONE_YET; /* need to find south bridge, too */ } Index: flashrom-pci_configspace_shutdown_restore/flashrom.c =================================================================== --- flashrom-pci_configspace_shutdown_restore/flashrom.c (Revision 1225) +++ flashrom-pci_configspace_shutdown_restore/flashrom.c (Arbeitskopie) @@ -441,7 +441,7 @@ {}, /* This entry corresponds to PROGRAMMER_INVALID. */ }; -#define SHUTDOWN_MAXFN 4 +#define SHUTDOWN_MAXFN 32 static int shutdown_fn_count = 0; struct shutdown_func_data { void (*func) (void *data); Index: flashrom-pci_configspace_shutdown_restore/programmer.h =================================================================== --- flashrom-pci_configspace_shutdown_restore/programmer.h (Revision 1225) +++ flashrom-pci_configspace_shutdown_restore/programmer.h (Arbeitskopie) @@ -212,7 +212,25 @@ }; uint32_t pcidev_validate(struct pci_dev *dev, uint32_t bar, const struct pcidev_status *devs); uint32_t pcidev_init(uint16_t vendor_id, uint32_t bar, const struct pcidev_status *devs); +/* rpci_write_* are reversible writes. The original PCI config space register + * contents will be restored on shutdown. + */ +int rpci_write_byte(struct pci_dev *dev, int pos, u8 data); +int rpci_write_word(struct pci_dev *dev, int pos, u16 data); +int rpci_write_long(struct pci_dev *dev, int pos, u32 data); +/* ppci_write_* are permanent writes, an alias for pci_write_*. */ +int ppci_write_byte(struct pci_dev *dev, int pos, u8 data); +int ppci_write_word(struct pci_dev *dev, int pos, u16 data); +int ppci_write_long(struct pci_dev *dev, int pos, u32 data); + +#if NO_PCI_REDIRECT +/* Don't touch pci_write_* definitions. */ +#else +#define pci_write_byte rpci_write_byte +#define pci_write_word rpci_write_word +#define pci_write_long rpci_write_long #endif +#endif /* print.c */ #if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_NICINTEL_SPI >= 1 -- http://www.hailfinger.org/

4 6

[commit] r1231 - trunk
by repository service 10 Nov '10

10 Nov '10

Author: hailfinger Date: Wed Nov 10 04:26:57 2010 New Revision: 1231 URL: http://flashrom.org/trac/flashrom/changeset/1231 Log: Add support for the OpenMoko Neo1973/Neo FreeRunner debug board version 2 or 3 (vid:pid 1457:5118). The new type is called "openmoko". Information about the debug board can be found at http://wiki.openmoko.org/wiki/Debug_Board_v3 Signed-off-by: Alex Badea <vamposdecampos(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ft2232_spi.c Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Wed Nov 10 04:22:39 2010 (r1230) +++ trunk/ft2232_spi.c Wed Nov 10 04:26:57 2010 (r1231) @@ -35,10 +35,16 @@ #define FTDI_FT4232H_PID 0x6011 #define AMONTEC_JTAGKEY_PID 0xCFF8 +#define FIC_VID 0x1457 +#define OPENMOKO_DBGBOARD_PID 0x5118 + const struct usbdev_status devs_ft2232spi[] = { {FTDI_VID, FTDI_FT2232H_PID, OK, "FTDI", "FT2232H"}, {FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"}, {FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"}, + {FIC_VID, OPENMOKO_DBGBOARD_PID, OK, + "First International Computer, Inc.", + "OpenMoko Neo1973 Debug board (V2+)"}, {}, }; @@ -144,8 +150,11 @@ ft2232_interface = INTERFACE_A; cs_bits = 0x18; pindir = 0x1b; - } - else { + } else if (!strcasecmp(arg, "openmoko")) { + ft2232_vid = FIC_VID; + ft2232_type = OPENMOKO_DBGBOARD_PID; + ft2232_interface = INTERFACE_A; + } else { msg_perr("Error: Invalid device type specified.\n"); free(arg); return 1;

1 0

[commit] r1230 - trunk
by repository service 10 Nov '10

10 Nov '10

Author: hailfinger Date: Wed Nov 10 04:22:39 2010 New Revision: 1230 URL: http://flashrom.org/trac/flashrom/changeset/1230 Log: ft2232_spi ftdi_usb_open() is called with the constant FTDI_VID vendor ID. Fix it by using the programmer-type-dependent ft2232_vid variable, to allow programmers with other vendor IDs. Signed-off-by: Alex Badea <vamposdecampos(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ft2232_spi.c Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Wed Nov 10 04:18:41 2010 (r1229) +++ trunk/ft2232_spi.c Wed Nov 10 04:22:39 2010 (r1230) @@ -179,7 +179,7 @@ return EXIT_FAILURE; // TODO } - f = ftdi_usb_open(ftdic, FTDI_VID, ft2232_type); + f = ftdi_usb_open(ftdic, ft2232_vid, ft2232_type); if (f < 0 && f != -5) { msg_perr("Unable to open FTDI device: %d (%s)\n", f,

1 0

[commit] r1229 - trunk
by repository service 10 Nov '10

10 Nov '10

Author: hailfinger Date: Wed Nov 10 04:18:41 2010 New Revision: 1229 URL: http://flashrom.org/trac/flashrom/changeset/1229 Log: ft2232_spi: allow 5x clock divisor to be set at runtime. Check at init time whether the chip is a type 'H' (FT2232H or FT4232H). If not, omit the disable-divide-by-5 (0x8a) command which can confuse older chips. Signed-off-by: Alex Badea <vamposdecampos(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ft2232_spi.c Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Wed Nov 10 04:10:41 2010 (r1228) +++ trunk/ft2232_spi.c Wed Nov 10 04:18:41 2010 (r1229) @@ -46,11 +46,11 @@ * The 'H' chips can run internally at either 12MHz or 60MHz. * The non-H chips can only run at 12MHz. */ -#define CLOCK_5X 1 +static uint8_t clock_5x = 1; /* * In either case, the divisor is a simple integer clock divider. - * If CLOCK_5X is set, this divisor divides 30MHz, else it divides 6MHz. + * If clock_5x is set, this divisor divides 30MHz, else it divides 6MHz. */ #define DIVIDE_BY 3 /* e.g. '3' will give either 10MHz or 2MHz SPI clock. */ @@ -131,6 +131,7 @@ int ft2232_type = FTDI_FT4232H_PID; enum ftdi_interface ft2232_interface = INTERFACE_B; char *arg; + double mpsse_clk; arg = extract_programmer_param("type"); if (arg) { @@ -186,6 +187,12 @@ exit(-1); // TODO } + if (ftdic->type != TYPE_2232H && ftdic->type != TYPE_4232H) { + msg_pdbg("FTDI chip type %d is not high-speed\n", + ftdic->type); + clock_5x = 0; + } + if (ftdi_set_interface(ftdic, ft2232_interface) < 0) { msg_perr("Unable to select interface: %s\n", ftdic->error_str); @@ -207,18 +214,16 @@ msg_perr("Unable to set bitmode to SPI\n"); } -#if CLOCK_5X - msg_pdbg("Disable divide-by-5 front stage\n"); - buf[0] = 0x8a; /* Disable divide-by-5. */ - if (send_buf(ftdic, buf, 1)) - return -1; -#define MPSSE_CLK 60.0 - -#else - -#define MPSSE_CLK 12.0 + if (clock_5x) { + msg_pdbg("Disable divide-by-5 front stage\n"); + buf[0] = 0x8a; /* Disable divide-by-5. */ + if (send_buf(ftdic, buf, 1)) + return -1; + mpsse_clk = 60.0; + } else { + mpsse_clk = 12.0; + } -#endif msg_pdbg("Set clock divisor\n"); buf[0] = 0x86; /* command "set divisor" */ /* valueL/valueH are (desired_divisor - 1) */ @@ -227,8 +232,10 @@ if (send_buf(ftdic, buf, 3)) return -1; - msg_pdbg("SPI clock is %fMHz\n", - (double)(MPSSE_CLK / (((DIVIDE_BY - 1) + 1) * 2))); + msg_pdbg("MPSSE clock: %f MHz divisor: %d " + "SPI clock: %f MHz\n", + mpsse_clk, DIVIDE_BY, + (double)(mpsse_clk / (((DIVIDE_BY - 1) + 1) * 2))); /* Disconnect TDI/DO to TDO/DI for loopback. */ msg_pdbg("No loopback of TDI/DO TDO/DI\n");

1 0

[commit] r1228 - trunk
by repository service 10 Nov '10

10 Nov '10

Author: hailfinger Date: Wed Nov 10 04:10:41 2010 New Revision: 1228 URL: http://flashrom.org/trac/flashrom/changeset/1228 Log: Retry short reads in ft2232_spi. It is possible that ftdi_read_data() returns less data than requested. Catch this case and retry reading the rest of the buffer. Signed-off-by: Alex Badea <vamposdecampos(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ft2232_spi.c Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Wed Nov 10 00:30:43 2010 (r1227) +++ trunk/ft2232_spi.c Wed Nov 10 04:10:41 2010 (r1228) @@ -108,11 +108,16 @@ int size) { int r; - r = ftdi_read_data(ftdic, (unsigned char *) buf, size); - if (r < 0) { - msg_perr("ftdi_read_data: %d, %s\n", r, - ftdi_get_error_string(ftdic)); - return 1; + + while (size > 0) { + r = ftdi_read_data(ftdic, (unsigned char *) buf, size); + if (r < 0) { + msg_perr("ftdi_read_data: %d, %s\n", r, + ftdi_get_error_string(ftdic)); + return 1; + } + buf += r; + size -= r; } return 0; }

1 0

[PATCH v2] DediProg: support for firmware version 5.1.5
by Mathias Krause 10 Nov '10

10 Nov '10

Hi, the DediProg firmware version 5.1.5 of the SF-100 works just fine. Also I've added error handling for the initial USB command to catch -EPERM errors. This version allows any firmware version from 2.x.y to 5.x.y, as suggested by Carl Daniel. Signed-off-by: Mathias Krause <mathias.krause(a)secunet.com> Regards, Mathias

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom