flashrom

flashrom@flashrom.org

5 participants
9161 discussions

3Com Corporation 3c905C-TX/TX-M
by Tadas 29 Mar '11

29 Mar '11

EREASE: [retry@retry-desktop src]$ sudo flashrom -p nic3com -VE flashrom v0.9.3-r1205 on Linux 2.6.37-ARCH (i686), built with libpci 3.1.7, GCC 4.5.2 20110127 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1446M loops per second, delay more than 10% too short (got 82% of expected delay), recalculating... 1424M loops per second, delay more than 10% too short (got 89% of expected delay), recalculating... 1403M loops per second, delay more than 10% too short (got 88% of expected delay), recalculating... 1409M loops per second, delay more than 10% too short (got 89% of expected delay), recalculating... 1489M loops per second, delay loop is unreliable, trying to continue 10 myus = 10 us, 100 myus = 94 us, 1000 myus = 933 us, 10000 myus = 9974 us, 4 myus = 4 us, OK. Initializing nic3com programmer Found "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200, BDF 02:01.0). Requested BAR is IO Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip size 2048 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: Chip size 1024 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: Chip size 1024 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT29C020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT29C040A, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Found chip "Atmel AT49BV512" (64 KB, Parallel) at physical address 0xffff0000. Probing for Atmel AT49F020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT49F002(N), 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT49F002(N)T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Bright BM29F040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for EMST F49B002UA, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x77 Probing for Fujitsu MBM29F400TC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x77 Probing for Hyundai HY29F002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Hyundai HY29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Hyundai HY29F040A, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Intel 28F001BN/BX-T, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0x77, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0x77, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L1635E, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29C51000T, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29C51400B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29C51400T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29LC51000, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29LC51001, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29LC51002, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST29EE020A, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST29LE020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF020A, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF080, 1024 KB: Chip size 1024 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M25PX32, 4096 KB: skipped. Probing for ST M25PX64, 8192 KB: skipped. Probing for ST M29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x77 Probing for ST M29F400BT, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x77 Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for TI TMS29F002RB, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W29C020(C)/W29C022, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W29C040/P, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W49F020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x00ffff, SUCCESS. [retry@retry-desktop src]$ sudo flashrom -p nic3com -VE flashrom v0.9.3-r1205 on Linux 2.6.37-ARCH (i686), built with libpci 3.1.7, GCC 4.5.2 20110127 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1446M loops per second, delay more than 10% too short (got 82% of expected delay), recalculating... 1424M loops per second, delay more than 10% too short (got 89% of expected delay), recalculating... 1403M loops per second, delay more than 10% too short (got 88% of expected delay), recalculating... 1409M loops per second, delay more than 10% too short (got 89% of expected delay), recalculating... 1489M loops per second, delay loop is unreliable, trying to continue 10 myus = 10 us, 100 myus = 94 us, 1000 myus = 933 us, 10000 myus = 9974 us, 4 myus = 4 us, OK. Initializing nic3com programmer Found "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200, BDF 02:01.0). Requested BAR is IO Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip size 2048 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: Chip size 1024 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: Chip size 1024 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT29C020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT29C040A, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Found chip "Atmel AT49BV512" (64 KB, Parallel) at physical address 0xffff0000. Probing for Atmel AT49F020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT49F002(N), 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT49F002(N)T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Bright BM29F040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for EMST F49B002UA, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x77 Probing for Fujitsu MBM29F400TC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x77 Probing for Hyundai HY29F002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Hyundai HY29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Hyundai HY29F040A, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Intel 28F001BN/BX-T, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0x77, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0x77, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L1635E, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29C51000T, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29C51400B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29C51400T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29LC51000, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29LC51001, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29LC51002, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST29EE020A, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST29LE020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF020A, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF080, 1024 KB: Chip size 1024 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M25PX32, 4096 KB: skipped. Probing for ST M25PX64, 8192 KB: skipped. Probing for ST M29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x77 Probing for ST M29F400BT, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x77 Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for TI TMS29F002RB, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W29C020(C)/W29C022, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W29C040/P, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W49F020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x00ffff, SUCCESS. Tadas Barzdžius +370695 92533

1 0

Re: [flashrom] Arduino LPC flasher?
by Benjamin Henrion 29 Mar '11

29 Mar '11

On Tue, Mar 29, 2011 at 3:02 AM, Joseph Smith <joe(a)settoplinux.org> wrote: > On 03/28/2011 03:11 AM, Benjamin Henrion wrote: >> >> On Sun, Mar 27, 2011 at 2:22 PM, Benjamin Henrion<bh(a)udev.org> wrote: >>> >>> On Sun, Mar 27, 2011 at 2:10 PM, Stefan Tauner >>> <stefan.tauner(a)student.tuwien.ac.at> wrote: >>>> >>>> On Sun, 27 Mar 2011 13:25:05 +0200 >>>> Benjamin Henrion<bh(a)udev.org> wrote: >>>> >>>>> Hi, >>>>> >>>>> I am trying to port this code to an Arduino Duemilanove (atmega328p): >>>>> >>>>> >>>>> http://mikestirling.co.uk/2010/08/programming-an-lpc-flash-with-an-avr-and-… >>>>> >>>>> When I change the chip to atmega168, I have the following error: >>>>> >>>>> avr-gcc -c -mmcu=atmega168 -I. -g -Os -funsigned-char >>>>> -funsigned-bitfields -fpack-struct -fshort-enums -Wall >>>>> -Wstrict-prototypes -Wa,-adhlns=uart.lst -std=gnu99 -DF_CPU=7372800 >>>>> -Wp,-M,-MP,-MT,uart.o,-MF,.dep/uart.o.d uart.c -o uart.o >>>>> uart.c: In function ‘__vector_18’: >>>>> uart.c:65: error: ‘_UDR’ undeclared (first use in this function) >>>>> uart.c:65: error: (Each undeclared identifier is reported only once >>>>> uart.c:65: error: for each function it appears in.) >>>>> uart.c: In function ‘__vector_19’: >>>>> uart.c:83: error: ‘_UDR’ undeclared (first use in this function) >>>>> uart.c: In function ‘uart_init’: >>>>> uart.c:281: error: ‘_UBRR’ undeclared (first use in this function) >>>>> make: *** [uart.o] Error 1 >>>>> >>>>> Any idea what to change? >>>>> >>>>> Having a simple Arduino being able to flash BIOS chips would be >>>>> awesome... >>>>> >>>> >>>> the register names for the uart are probably different. e.g. for my >>>> atmega32u2 i would have to use UDR1 and UBRR1[H|L]. >>>> just look it up in the datasheet or /usr/lib/avr/include/avr/. >>>> HTH >>> >>> I have replaced all the _UDR references directly by UDR0, the same for >>> _UBRR, and it compiles fine now. >>> >>> Now the Arduino Duemilanove can work in 3.3V if I am not mistaken, I >>> tried in 5V, it gives me the following error: >>> >>> # flashrom -p serprog:/dev/ttyUSB0:115200 >>> flashrom v0.9.2-r1028 on Linux 2.6.35-27-generic (x86_64), built with >>> libpci 3.0.0, GCC 4.4.4, little endian >>> flashrom is free software, get the source code at http://www.flashrom.org >>> >>> Calibrating delay loop... OK. >>> Error: cannot synchronize protocol >>> - check communications and reset device? >> >> It founds now the arduino, but not the LPC chip: >> >> ======================================================== >> flashrom -p serprog:/dev/ttyUSB0:115200 >> flashrom v0.9.2-r1028 on Linux 2.6.35-27-generic (x86_64), built with >> libpci 3.0.0, GCC 4.4.4, little endian >> flashrom is free software, get the source code at http://www.flashrom.org >> >> Calibrating delay loop... OK. >> serprog:Programmer name "ATMega88 LPC " >> No EEPROM/flash device found. >> Note: flashrom can never write if the flash chip isn't found >> automatically. >> ======================================================== >> >> I am probably wrong in my pinout matching: >> >> http://www.zoobab.com/arduino-as-a-bios-lpc-flasher >> >> If someone knows more about LPC... >> > Cool project :-) > I have been eyeing the UBW32 for a while for same purpose. One thing I > noticed on your link is you have LAD2 and LAD3 open ended. You WILL need all > 4 LAD lines. There is no way to even detect the chip without it. Here is a > good reference on LPC and FWH I/O operations: > > http://www.intel.com/design/chipsets/industry/lpc.htm > > As far as the rest of the LPC pins as long as you have them connected to a > arduino gpio they should work fine (as long as the data signal is no greater > than 3.3v). As far as what LPC pins, power pins, and ground pins need to be > connected on the chip google around and research the Cheapmod for xbox. If > your lucky you may find a schematic. Hope that helps. Mike just sent me his pinout for the atmega88: "CLK - PORTC[5] - ATMEGA88 (DIL) pin 28 /LFRAM - PORTC[4] - ATMEGA88 (DIL) pin 27 LAD[3] - PORTC[3] - ATMEGA88 (DIL) pin 26 LAD[2] - PORTC[2] - ATMEGA88 (DIL) pin 25 LAD[1] - PORTC[1] - ATMEGA88 (DIL) pin 24 LAD[0] - PORTC[0] - ATMEGA88 (DIL) pin 23 /WP, /TBL, /INIT all tied high Any other pins, e.g. MODE and ID pins, are no connect." I should be able to try it this evening after work... -- Benjamin Henrion <bhenrion at ffii.org> FFII Brussels - +32-484-566109 - +32-2-4148403 "In July 2005, after several failed attempts to legalise software patents in Europe, the patent establishment changed its strategy. Instead of explicitly seeking to sanction the patentability of software, they are now seeking to create a central European patent court, which would establish and enforce patentability rules in their favor, without any possibility of correction by competing courts or democratically elected legislators."

1 0

Arduino LPC flasher?
by Benjamin Henrion 29 Mar '11

29 Mar '11

Hi, I am trying to port this code to an Arduino Duemilanove (atmega328p): http://mikestirling.co.uk/2010/08/programming-an-lpc-flash-with-an-avr-and-… When I change the chip to atmega168, I have the following error: avr-gcc -c -mmcu=atmega168 -I. -g -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=uart.lst -std=gnu99 -DF_CPU=7372800 -Wp,-M,-MP,-MT,uart.o,-MF,.dep/uart.o.d uart.c -o uart.o uart.c: In function ‘__vector_18’: uart.c:65: error: ‘_UDR’ undeclared (first use in this function) uart.c:65: error: (Each undeclared identifier is reported only once uart.c:65: error: for each function it appears in.) uart.c: In function ‘__vector_19’: uart.c:83: error: ‘_UDR’ undeclared (first use in this function) uart.c: In function ‘uart_init’: uart.c:281: error: ‘_UBRR’ undeclared (first use in this function) make: *** [uart.o] Error 1 Any idea what to change? Having a simple Arduino being able to flash BIOS chips would be awesome... Best, -- Benjamin Henrion <bhenrion at ffii.org> FFII Brussels - +32-484-566109 - +32-2-4148403 "In July 2005, after several failed attempts to legalise software patents in Europe, the patent establishment changed its strategy. Instead of explicitly seeking to sanction the patentability of software, they are now seeking to create a central European patent court, which would establish and enforce patentability rules in their favor, without any possibility of correction by competing courts or democratically elected legislators."

3 4

Re: [flashrom] [coreboot] Stutter on boot for Geos embedded board
by Carl-Daniel Hailfinger 28 Mar '11

28 Mar '11

Hi, [followup to flashrom(a)flashrom.org please] Am 28.03.2011 01:32 schrieb Nathan Williams: > Flashrom is available as a package in OpenWRT, but from memory I think > it looks for /dev/cpu/0/msr and OpenWRT has /dev/msr0 instead. Create a > symlink to get it to work. > Are you aware of any other environments with other odd MSR device file locations? I'd like to make sure flashrom supports them all out of the box. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

FAILED: Tyan:2915 (Thunder n6650W)
by Ryne Bell 28 Mar '11

28 Mar '11

I am attempting to update the bios of my Tyan 2915 motherboard, but have encountered an error I compiled it myself on a Linux live cd, the file xaa is the first 1MB of the latest bios release from Tyan: version 4.01d_beta. Thanks, Ryne This is the output I get with one -V ubuntu@ubuntu:~/Downloads$ sudo flashrom -w xaa -V flashrom v0.9.3-r1205 on Linux 2.6.35-22-generic (x86_64), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 2 usecs, 999M loops per second, 10 myus = 12 us, 100 myus = 101 us, 1000 myus = 1000 us, 10000 myus = 10009 us, 8 myus = 10 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "HP xw9400 Workstation" DMI string system-version: " " DMI string baseboard-manufacturer: "Hewlett-Packard" DMI string baseboard-product-name: "0A1Ch" DMI string baseboard-version: "Not Specified" DMI string chassis-type: "Mini Tower" Found chipset "NVIDIA MCP55", enabling flash write... chipset PCI ID is 10de:0364, OK. This chipset supports the following protocols: Non-SPI. Disabling flash write protection for board "HP xw9400"... OK. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b, id2 is normal flash content Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b, id2 is normal flash content Probing for Atmel AT49F020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Bright BM29F040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Hyundai HY29F002T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Hyundai HY29F002B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Hyundai HY29F040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Intel 28F001BN/BX-T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L1635E, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b, id2 is normal flash content Probing for MoselVitelic V29C51000T, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b, id2 is normal flash content Probing for MoselVitelic V29C51400B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for MoselVitelic V29C51400T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for MoselVitelic V29LC51000, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b, id2 is normal flash content Probing for MoselVitelic V29LC51001, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for MoselVitelic V29LC51002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b, id2 is normal flash content Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b, id2 is normal flash content Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b Found chip "SST SST49LF080A" (1024 KB, LPC) at physical address 0xfff00000. Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M25PX32, 4096 KB: skipped. Probing for ST M25PX64, 8192 KB: skipped. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0xe9, id2 0x5b, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W29C020(C)/W29C022, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W29C040/P, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W39V040(F)B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W39V040(F)C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W49F002U/N, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W49F020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, 0x001000-0x001fff, 0x002000-0x002fff, 0x003000-0x003fff, 0x004000-0x004fff, 0x005000-0x005fff, 0x006000-0x006fff, 0x007000-0x007fff, 0x008000-0x008fff, 0x009000-0x009fff, 0x00a000-0x00afff, 0x00b000-0x00bfff, 0x00c000-0x00cfff, 0x00d000-0x00dfff, 0x00e000-0x00efff, 0x00f000-0x00ffff, 0x010000-0x010fff, 0x011000-0x011fff, 0x012000-0x012fff, 0x013000-0x013fff, 0x014000-0x014fff, 0x015000-0x015fff, 0x016000-0x016fff, 0x017000-0x017fff, 0x018000-0x018fff, 0x019000-0x019fff, 0x01a000-0x01afff, 0x01b000-0x01bfff, 0x01c000-0x01cfff, 0x01d000-0x01dfff, 0x01e000-0x01efff, 0x01f000-0x01ffff, 0x020000-0x020fff, 0x021000-0x021fff, 0x022000-0x022fff, 0x023000-0x023fff, 0x024000-0x024fff, 0x025000-0x025fff, 0x026000-0x026fff, 0x027000-0x027fff, 0x028000-0x028fff, 0x029000-0x029fff, 0x02a000-0x02afff, 0x02b000-0x02bfff, 0x02c000-0x02cfff, 0x02d000-0x02dfff, 0x02e000-0x02efff, 0x02f000-0x02ffff, 0x030000-0x030fff, 0x031000-0x031fff, 0x032000-0x032fff, 0x033000-0x033fff, 0x034000-0x034fff, 0x035000-0x035fff, 0x036000-0x036fff, 0x037000-0x037fff, 0x038000-0x038fff, 0x039000-0x039fff, 0x03a000-0x03afff, 0x03b000-0x03bfff, 0x03c000-0x03cfff, 0x03d000-0x03dfff, 0x03e000-0x03efff, 0x03f000-0x03ffff, 0x040000-0x040fff, 0x041000-0x041fff, 0x042000-0x042fff, 0x043000-0x043fff, 0x044000-0x044fff, 0x045000-0x045fff, 0x046000-0x046fff, 0x047000-0x047fff, 0x048000-0x048fff, 0x049000-0x049fff, 0x04a000-0x04afff, 0x04b000-0x04bfff, 0x04c000-0x04cfff, 0x04d000-0x04dfff, 0x04e000-0x04efff, 0x04f000-0x04ffff, 0x050000-0x050fff, 0x051000-0x051fff, 0x052000-0x052fff, 0x053000-0x053fff, 0x054000-0x054fff, 0x055000-0x055fff, 0x056000-0x056fff, 0x057000-0x057fff, 0x058000-0x058fff, 0x059000-0x059fff, 0x05a000-0x05afff, 0x05b000-0x05bfff, 0x05c000-0x05cfff, 0x05d000-0x05dfff, 0x05e000-0x05efff, 0x05f000-0x05ffff, 0x060000-0x060fff, 0x061000-0x061fff, 0x062000-0x062fff, 0x063000-0x063fff, 0x064000-0x064fff, 0x065000-0x065fff, 0x066000-0x066fff, 0x067000-0x067fff, 0x068000-0x068fff, 0x069000-0x069fff, 0x06a000-0x06afff, 0x06b000-0x06bfff, 0x06c000-0x06cfff, 0x06d000-0x06dfff, 0x06e000-0x06efff, 0x06f000-0x06ffff, 0x070000-0x070fff, 0x071000-0x071fff, 0x072000-0x072fff, 0x073000-0x073fff, 0x074000-0x074fff, 0x075000-0x075fff, 0x076000-0x076fff, 0x077000-0x077fff, 0x078000-0x078fff, 0x079000-0x079fff, 0x07a000-0x07afff, 0x07b000-0x07bfff, 0x07c000-0x07cfff, 0x07d000-0x07dfff, 0x07e000-0x07efff, 0x07f000-0x07ffff, 0x080000-0x080fff, 0x081000-0x081fff, 0x082000-0x082fff, 0x083000-0x083fff, 0x084000-0x084fff, 0x085000-0x085fff, 0x086000-0x086fff, 0x087000-0x087fff, 0x088000-0x088fff, 0x089000-0x089fff, 0x08a000-0x08afff, 0x08b000-0x08bfff, 0x08c000-0x08cfff, 0x08d000-0x08dfff, 0x08e000-0x08efff, 0x08f000-0x08ffff, 0x090000-0x090fff, 0x091000-0x091fff, 0x092000-0x092fff, 0x093000-0x093fff, 0x094000-0x094fff, 0x095000-0x095fff, 0x096000-0x096fff, 0x097000-0x097fff, 0x098000-0x098fff, 0x099000-0x099fff, 0x09a000-0x09afff, 0x09b000-0x09bfff, 0x09c000-0x09cfff, 0x09d000-0x09dfff, 0x09e000-0x09efff, 0x09f000-0x09ffff, 0x0a0000-0x0a0fff, 0x0a1000-0x0a1fff, 0x0a2000-0x0a2fff, 0x0a3000-0x0a3fff, 0x0a4000-0x0a4fff, 0x0a5000-0x0a5fff, 0x0a6000-0x0a6fff, 0x0a7000-0x0a7fff, 0x0a8000-0x0a8fff, 0x0a9000-0x0a9fff, 0x0aa000-0x0aafff, 0x0ab000-0x0abfff, 0x0ac000-0x0acfff, 0x0ad000-0x0adfff, 0x0ae000-0x0aefff, 0x0af000-0x0affff, 0x0b0000-0x0b0fff, 0x0b1000-0x0b1fff, 0x0b2000-0x0b2fff, 0x0b3000-0x0b3fff, 0x0b4000-0x0b4fff, 0x0b5000-0x0b5fff, 0x0b6000-0x0b6fff, 0x0b7000-0x0b7fff, 0x0b8000-0x0b8fff, 0x0b9000-0x0b9fff, 0x0ba000-0x0bafff, 0x0bb000-0x0bbfff, 0x0bc000-0x0bcfff, 0x0bd000-0x0bdfff, 0x0be000-0x0befff, 0x0bf000-0x0bffff, 0x0c0000-0x0c0fff, 0x0c1000-0x0c1fff, 0x0c2000-0x0c2fff, 0x0c3000-0x0c3fff, 0x0c4000-0x0c4fff, 0x0c5000-0x0c5fff, 0x0c6000-0x0c6fff, 0x0c7000-0x0c7fff, 0x0c8000-0x0c8fff, 0x0c9000-0x0c9fff, 0x0ca000-0x0cafff, 0x0cb000-0x0cbfff, 0x0cc000-0x0ccfff, 0x0cd000-0x0cdfff, 0x0ce000-0x0cefff, 0x0cf000-0x0cffff, 0x0d0000-0x0d0fff, 0x0d1000-0x0d1fff, 0x0d2000-0x0d2fff, 0x0d3000-0x0d3fff, 0x0d4000-0x0d4fff, 0x0d5000-0x0d5fff, 0x0d6000-0x0d6fff, 0x0d7000-0x0d7fff, 0x0d8000-0x0d8fff, 0x0d9000-0x0d9fff, 0x0da000-0x0dafff, 0x0db000-0x0dbfff, 0x0dc000-0x0dcfff, 0x0dd000-0x0ddfff, 0x0de000-0x0defff, 0x0df000-0x0dffff, 0x0e0000-0x0e0fff, 0x0e1000-0x0e1fff, 0x0e2000-0x0e2fff, 0x0e3000-0x0e3fff, 0x0e4000-0x0e4fff, 0x0e5000-0x0e5fff, 0x0e6000-0x0e6fff, 0x0e7000-0x0e7fff, 0x0e8000-0x0e8fff, 0x0e9000-0x0e9fff, 0x0ea000-0x0eafff, 0x0eb000-0x0ebfff, 0x0ec000-0x0ecfff, 0x0ed000-0x0edfff, 0x0ee000-0x0eefff, 0x0ef000-0x0effff, 0x0f0000-0x0f0fff, ERASE FAILED at 0x000f0000! Expected=0xff, Read=0xe9, failed byte count from 0x000f0000-0x000f0fff: 0xf56 ERASE FAILED! Looking at blockwise erase function 1... trying... 0x000000-0x00ffff, 0x010000-0x01ffff, 0x020000-0x02ffff, 0x030000-0x03ffff, 0x040000-0x04ffff, 0x050000-0x05ffff, 0x060000-0x06ffff, 0x070000-0x07ffff, 0x080000-0x08ffff, 0x090000-0x09ffff, 0x0a0000-0x0affff, 0x0b0000-0x0bffff, 0x0c0000-0x0cffff, 0x0d0000-0x0dffff, 0x0e0000-0x0effff, 0x0f0000-0x0fffff, ERASE FAILED at 0x000f0000! Expected=0xff, Read=0xe9, failed byte count from 0x000f0000-0x000fffff: 0x603c ERASE FAILED! Looking at blockwise erase function 2... eraseblock layout is known, but no matching block erase function found. Looking for another erase function. Looking at blockwise erase function 3... not defined. Looking for another erase function. Looking at blockwise erase function 4... not defined. Looking for another erase function. Looking at blockwise erase function 5... not defined. Looking for another erase function. FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org with FAILED: your board name in the subject line! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF!

2 1

Success report MX25L4005 and BusPirate
by rzavaleta＠fibertel.com.ar 28 Mar '11

28 Mar '11

Team, I have successfully programmed the Macronix MX25L4005 chip, and all operations (detect, read, write, erase) worked OK. I used a version of flashrom published in Dangerous Prototypes' Bus Pirate forum. Results consistent after several runs / tries. flashrom v0.9.2-r1182 on unknown machine, built with GCC 3.4.5 (mingw-vista special r3), little endian flashrom is free software, get the source code at http://www.flashrom.org Please find attached the log files. Congratulations on flashrom development, and thanks for BusPirate / windwos port ! I think it would be really helpful to have instructions on how to build newer / later revisions, like 0.9.3, on mingw. I made several tries, selecting various build options, but nothing ever compiled. Regards, Ing. Ricardo Luis Zavaleta

1 0

3Com Corporation 3c905C-TX/TX-M
by Tadas 27 Mar '11

27 Mar '11

PROBE: [retry@retry-desktop src]$ sudo flashrom -p nic3com -V flashrom v0.9.3-r1205 on Linux 2.6.37-ARCH (i686), built with libpci 3.1.7, GCC 4.5.2 20110127 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 927M loops per second, 10 myus = 11 us, 100 myus = 162 us, 1000 myus = 1328 us, 10000 myus = 10747 us, 4 myus = 7 us, OK. Initializing nic3com programmer Found "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200, BDF 02:01.0). Requested BAR is IO Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip size 2048 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: Chip size 1024 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: Chip size 1024 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT29C020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT29C040A, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Found chip "Atmel AT49BV512" (64 KB, Parallel) at physical address 0xffff0000. Probing for Atmel AT49F020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT49F002(N), 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT49F002(N)T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Bright BM29F040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for EMST F49B002UA, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x08 Probing for Fujitsu MBM29F400TC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x08 Probing for Hyundai HY29F002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Hyundai HY29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Hyundai HY29F040A, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Intel 28F001BN/BX-T, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L1635E, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29C51000T, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29C51400B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29C51400T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29LC51000, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29LC51001, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29LC51002, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST29EE020A, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST29LE020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF020A, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF080, 1024 KB: Chip size 1024 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M25PX32, 4096 KB: skipped. Probing for ST M25PX64, 8192 KB: skipped. Probing for ST M29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x08 Probing for ST M29F400BT, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x08 Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for TI TMS29F002RB, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W29C020(C)/W29C022, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W29C040/P, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W49F020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! No operations were specified. READ: [retry@retry-desktop src]$ sudo flashrom -p nic3com -Vr backup.rom flashrom v0.9.3-r1205 on Linux 2.6.37-ARCH (i686), built with libpci 3.1.7, GCC 4.5.2 20110127 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1152M loops per second, delay more than 10% too short (got 73% of expected delay), recalculating... 1358M loops per second, delay more than 10% too short (got 76% of expected delay), recalculating... 1043M loops per second, delay more than 10% too short (got 59% of expected delay), recalculating... 1148M loops per second, delay more than 10% too short (got 72% of expected delay), recalculating... 1016M loops per second, delay loop is unreliable, trying to continue 10 myus = 6 us, 100 myus = 64 us, 1000 myus = 684 us, 10000 myus = 6504 us, 4 myus = 3 us, OK. Initializing nic3com programmer Found "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200, BDF 02:01.0). Requested BAR is IO Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip size 2048 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: Chip size 1024 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: Chip size 1024 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT29C020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT29C040A, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Found chip "Atmel AT49BV512" (64 KB, Parallel) at physical address 0xffff0000. Probing for Atmel AT49F020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT49F002(N), 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Atmel AT49F002(N)T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Bright BM29F040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for EMST F49B002UA, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x08 Probing for Fujitsu MBM29F400TC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x08 Probing for Hyundai HY29F002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Hyundai HY29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Hyundai HY29F040A, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Intel 28F001BN/BX-T, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L1635E, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29C51000T, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29C51400B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29C51400T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29LC51000, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29LC51001, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for MoselVitelic V29LC51002, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST29EE020A, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST29LE020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF020A, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39SF040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF040, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST39VF080, 1024 KB: Chip size 1024 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M25PX32, 4096 KB: skipped. Probing for ST M25PX64, 8192 KB: skipped. Probing for ST M29F002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x08 Probing for ST M29F400BT, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x55, id2 0x08 Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for TI TMS29F002RB, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W29C020(C)/W29C022, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W29C040/P, 512 KB: Chip size 512 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W49F020, 256 KB: Chip size 256 kB is bigger than supported size 128 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x1f, id2 0x03 Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... done. Tadas Barzdžius +370695 92533

1 0

Flashrom fails to write and erase
by Benjamin Henrion 26 Mar '11

26 Mar '11

Hi, I am trying to write a BIOS chip, but it fails. Can you help? I can give you a shell on the machine if needed. Best, https://pastee.org/t6nrm root@karas /home/zoobab/flashrom [35]# flashrom -w out flashrom v0.9.2-r1028 on Linux 2.6.35-22-generic (i686), built with libpci 3.0.0, GCC 4.4.4, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. No coreboot table found. Found ITE Super I/O, id 8712 This chipset supports the following protocols: Non-SPI. WARNING: No chipset found. Flash detection will most likely fail. Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash chip... ERASE FAILED at 0x00070000! Expected=0xff, Read=0xea, failed byte count from 0x00070000-0x00070fff: 0xf88 ERASE FAILED! ERASE FAILED at 0x00070000! Expected=0xff, Read=0xea, failed byte count from 0x00070000-0x0007ffff: 0xfc35 ERASE FAILED! FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! root@karas /home/zoobab/flashrom [36]# l total 512 -rw-r--r-- 1 root root 524288 2011-03-26 13:38 out root@karas /home/zoobab/flashrom [37]# flashrom -r outb flashrom v0.9.2-r1028 on Linux 2.6.35-22-generic (i686), built with libpci 3.0.0, GCC 4.4.4, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. No coreboot table found. Found ITE Super I/O, id 8712 This chipset supports the following protocols: Non-SPI. WARNING: No chipset found. Flash detection will most likely fail. Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. Reading flash... done. root@karas /home/zoobab/flashrom [38]# l total 1024 -rw-r--r-- 1 root root 524288 2011-03-26 13:38 out -rw-r--r-- 1 root root 524288 2011-03-26 15:43 outb root@karas /home/zoobab/flashrom [39]# md5sum out ca46392c3672777358db74d8cb7f45c3 out root@karas /home/zoobab/flashrom [40]# md5sum outb fbcf66856ff3119bb7162a22257ebd88 outb -- Benjamin Henrion <bhenrion at ffii.org> FFII Brussels - +32-484-566109 - +32-2-4148403 "In July 2005, after several failed attempts to legalise software patents in Europe, the patent establishment changed its strategy. Instead of explicitly seeking to sanction the patentability of software, they are now seeking to create a central European patent court, which would establish and enforce patentability rules in their favor, without any possibility of correction by competing courts or democratically elected legislators."

1 0

SST SST49LF040B @ Acer E415SM (Acer AcerPower F6)
by Thorsten Klaes 26 Mar '11

26 Mar '11

Hi together, here the requested pastes of the backup created before flashing and outputs of flashrom, lspci and superiotool http://paste.flashrom.org/view.php?id=438 http://paste.flashrom.org/view.php?id=439 thanks in advance -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de

2 1

Asus L1N64WS/B
by Julian Shulika 25 Mar '11

25 Mar '11

I have Asus L1N64WS/B (SST49LF080A) and L1N64WS-Sli (Winbond W39V080APZ) motherboards. It's not supported by flashrom I attached the dmi output and an "lspci -vvnnxxx" output.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom