flashrom

flashrom@flashrom.org

5 participants
9161 discussions

[PATCH] Warn about unhandled one-time programmable memory
by Daniel Lenski 14 Aug '11

14 Aug '11

Added feature bit FEATURE_UNHANDLED_OTP, and a warning for chips like AMIC A25L032 and A25LQ032 which contain small regions of one-time programmable memory that flashrom can neither read, nor write, nor erase. Signed-off-by: Daniel Lenski <dlenski(a)gmail.com> --- flash.h | 1 + flashchips.c | 2 ++ flashrom.c | 8 ++++++++ 3 files changed, 11 insertions(+), 0 deletions(-) diff --git a/flash.h b/flash.h index 6f0d7c0..6db4c48 100644 --- a/flash.h +++ b/flash.h @@ -85,6 +85,7 @@ enum chipbustype { #define FEATURE_ADDR_SHIFTED (1 << 5) #define FEATURE_WRSR_EWSR (1 << 6) #define FEATURE_WRSR_WREN (1 << 7) +#define FEATURE_UNHANDLED_OTP (1 << 8) #define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN) struct flashchip { diff --git a/flashchips.c b/flashchips.c index efd7599..07b9635 100644 --- a/flashchips.c +++ b/flashchips.c @@ -817,6 +817,7 @@ struct flashchip flashchips[] = { .model_id = AMIC_A25L032, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_UNHANDLED_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -852,6 +853,7 @@ struct flashchip flashchips[] = { .model_id = AMIC_A25LQ032, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_UNHANDLED_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, diff --git a/flashrom.c b/flashrom.c index 2690151..a7471a6 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1434,6 +1434,14 @@ void check_chip_supported(struct flashchip *flash) "Thanks for your help!\n" "===\n"); } + if (flash->feature_bits & FEATURE_UNHANDLED_OTP) { + msg_cinfo("===\n" + "This flash part contains a region of one-time programmable memory\n" + "which flashrom cannot read, and may never be able to write or\n" + "erase. flashrom may not be able to completely backup and rewrite\n" + "the contents of this chip.\n" + "===\n"); + } } int main(int argc, char *argv[]) -- 1.7.0.4

2 1

Re: [flashrom] flashrom on PowerPC
by Peter Lemenkov 13 Aug '11

13 Aug '11

2011/7/27 Mattias Mattsson <vitplister(a)gmail.com>: > Hi all, > > I was able to run flashrom under Linux on PPC (big endian) hardware > with two small modifications in internal.c and processor_enable.c (see > attached patch). Not sure if this is the right way to do it but it > seems to work for me. > > Note that for Apple hardware you have to use a special power on method > to make the flash chip accessible (hold power button until beep). On > some models you have to press and hold an additional button on the > machine ("programmer's button") or keyboard ("Command"). > http://support.apple.com/kb/HT2322 > http://support.apple.com/kb/DL1284 > http://support.apple.com/kb/DL1126 > > I have tested this on two pieces of Apple hardware: "Mac Mini" (model > ID: PowerMac10,1) and "Mac mini (Late 2005)" (model ID: PowerMac10,2): > http://support.apple.com/kb/ht3476 > > By taking the hardware apart I can confirm they have the following flash chips: > > PowerMac10,1: AMD Am29LV008BB-90EC > PowerMac10,2: SHARP LH28F008BJT-BTLZ1 > > Flash chips seem to be mapped top-aligned in the 4GB address space. > Looking at the Open Firmware forth code inside Apple's own firmware > updates also suggests this is the case. > > I was able to probe, read, write and erase on both machines. Read > files seem to contain valid data. > > Added support for LH28F008BJT-BTLZ1 and marked Am29LV008B as fully tested. What's the status of these patches? Could anyone ACK them? -- With best regards, Peter Lemenkov.

1 0

Initial version of autotools support for Flashrom
by Peter Lemenkov 13 Aug '11

13 Aug '11

Hello All. Some time ago I mentioned that I've got patches for full autotools support - here is the first patch in a patchset for your further consideration: https://github.com/lemenkov/flashrom/commits/autotools It was tested on RHEL 5, 6, Fedora 1x, i386, i586, i686, x86_64 and ppc (I'm using it for building Flashrom's RPM for a half of the year at least). It's rebased on top of svn1412 and cleaned up to be a full drop-in replacement for handmade Makefile. Unfortunately I didn't test in on anything else than Linux, so I must admit that it's not in a very good shape for MinGW / BSD / DOS / Darwin users (ARM, MIPS users could be also hurt as well - that's why I didn't touch anything else in this commit except adding these two files). -- With best regards, Peter Lemenkov.

1 0

Re: [flashrom] [PATCH] Makefile: fix and simplify test program compilations
by Stefan Tauner 13 Aug '11

13 Aug '11

On Fri, 12 Aug 2011 21:38:37 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > side note: we use $(CC) all over the place before we even check if > it is there. e.g.: > override ARCH = $(strip $(shell LC_ALL=C $(CC) -E arch.h|grep -v '^\#')) > > this creates unwanted output like: > make -j1 CC=eiugthes > /bin/sh: eiugthes: not found > /bin/sh: eiugthes: not found > /bin/sh: eiugthes: not found > /bin/sh: eiugthes: not found > Checking for a C compiler... not found. > make: *** [compiler] Error 1 actually it is only this one line that creates the output. the reason it executes the command 4 times instead of caching it is the use of "=" instead of ":=", see http://www.gnu.org/s/hello/manual/make/Flavors.html#Flavors i have added the : to the ARCH definition, but it does not solve the underlying problem that it is executed before the compiler test: make -j1 CC=eiugthes /bin/sh: eiugthes: not found Checking for a C compiler... not found. make: *** [compiler] Error 1 -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH] Makefile: fix and simplify test program compilations
by Stefan Tauner 13 Aug '11

13 Aug '11

On Fri, 12 Aug 2011 21:38:37 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > +define COMPILER_TEST > +int main(int argc, char **argv) > +{ > + (void) argafc; testing leftovers, fixed locally... -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Message levels and content
by Carl-Daniel Hailfinger 13 Aug '11

13 Aug '11

Hi, it has become quite obvious that there are different views about how much output flashrom should provide at default verbosity. I'd like to keep line count down, but at the same time I acknowledge that long-running operations need some user feedback. Those goals are not easily reconcilable and there will be some friction. Others would like to upgrade the message levels of quite a few messages and introduce a separate quiet mode which is less verbose than default mode. Given that this dicussion revolves around the UI and different people expect different things, I don't want to "solve" this by decree. Instead, I hope for consensus. We definitely need to reach a decision, but maybe we can do this with the help of use cases and by examining typical flashrom output. I'm sure there is some low-hanging fruit where the message content/level can be adjusted and where people agree on the changes. Regards, Carl-Daniel -- http://www.hailfinger.org/

3 8

[PATCH] Fix all ASUS P5GD* board enables
by Stefan Tauner 12 Aug '11

12 Aug '11

Changes related to P5GD1 variants: - Reorder "P5GD1 Pro" in print.c and include a DMI patter to its board enable - Add an untested "P5GD1(-VM)" board enable and add an entry to print.c Changes related to P5GD(2/C) variants: - Fix the name of "P5GDC-V Deluxe" board enable and add a DMI pattern and print.c entry. NB: there is no "P5GDC-V" board. - Add a generic match for P5GD(2/C)* boards with a not tested tag. This are the potential targets for this according to the asus ftp: ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/ Unsupported variants of the P5GD2: P5GD2, P5GD2 Deluxe, P5GD2 Pro, P5GD2-X (P5GD2 Premium is already tested) (there seems to be also a P5GD2-TVM/GB/SI in the wild, which is not known to asus :) Unsupported variants of the P5GDC: P5GDC Pro, P5GDC-MX (P5GDC Deluxe and P5GDC-V Deluxe are already tested) References: P5GD1 PRO (dmi "P5GD1 PRO") smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, *0x814e* http://www.coreboot.org/pipermail/flashrom/2010-August/004539.html P5GD1 (dmi "P5GD1") The non-pro version seems to match the pro pci pattern, but could be distinguished by the SATA ID of 1043:2604 vs. 1043:2601: https://launchpadlibrarian.net/62167576/Lspci.txt or a DMI pattern of course. P5GD1-VM (dmi "P5GD1-VM") This does also match the current PCI IDs. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/465379 - P5GD2 Premium (dmi "P5GD2-Premium") smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d http://www.flashrom.org/pipermail/flashrom/2010-August/004555.html - P5GDC-V Deluxe (dmi "P5GDC-V") smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d http://www.flashrom.org/pipermail/flashrom/2010-September/004939.html - P5GDC Deluxe (dmi "P5GDC") smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d http://www.flashrom.org/pipermail/flashrom/2010-September/004684.html - P5GDC Pro, P5GDC-MX, P5GD2-X, P5GD2 Pro, P5GD2 no useful logs found - P5GD2-Deluxe (dmi "P5GD2-Deluxe") smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d https://bugs.launchpad.net/ubuntu/+source/foomatic-filters/+bug/572514 - P5GD2-TVM/GB/SI (dmi "P5GD2-TVM/GB/SI") smbus: 0x8086, 0x266a, 0x1043, 0x266a; audio: 0x8086, 0x2668, 0x1043, *0x81a7* https://bugs.launchpad.net/ubuntu/+source/linux/+bug/462500 Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- adding tested board enable with exact matches for identified and tested boards and NT board enables for potentially compatible boards should be the scheme to be used in the future for all mainboard families instead of adding an uncertain generic board enable or none at all (just because the user does not reply). The policy should be to add board enables as soon as they become available or at least no longer than a week after posting it, even without success reports. Rationale: This scheme guarantees that we get success reports for untested boards which allows us to combine them later when we are sure (enough). OTOH it allows users to easily test the yet unsupported boards without recompiling by forcing the generic board enables. And it keeps the patch queue short. Investigating all of the above was certainly not worth it on its own and id suggest to avoid similar efforts in the future by following the scheme :) --- board_enable.c | 7 +++++-- print.c | 5 ++++- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/board_enable.c b/board_enable.c index aba6f38..ab9aff4 100644 --- a/board_enable.c +++ b/board_enable.c @@ -2022,9 +2022,12 @@ const struct board_pciid_enable board_pciid_enables[] = { {0x8086, 0x2570, 0x1043, 0x80A5, 0x105A, 0x24D3, 0x1043, 0x80A6, NULL, NULL, NULL, P3, "ASUS", "P4SD-LA", 0, NT, intel_ich_gpio32_raise}, {0x1039, 0x0661, 0x1043, 0x8113, 0x1039, 0x5513, 0x1043, 0x8087, NULL, NULL, NULL, P3, "ASUS", "P4S800-MX", 512, OK, w836xx_memw_enable_2e}, {0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "^P5A$", "asus", "p5a", P3, "ASUS", "P5A", 0, OK, board_asus_p5a}, - {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x814e, NULL, NULL, NULL, P3, "ASUS", "P5GD1 Pro", 0, OK, intel_ich_gpio21_raise}, + {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x814e, "^P5GD1 PRO$", NULL, NULL, P3, "ASUS", "P5GD1 Pro", 0, OK, intel_ich_gpio21_raise}, + {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x814e, NULL, NULL, NULL, P3, "ASUS", "P5GD1(-VM)", 0, NT, intel_ich_gpio21_raise}, {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x813d, "^P5GD2-Premium$", NULL, NULL, P3, "ASUS", "P5GD2 Premium", 0, OK, intel_ich_gpio21_raise}, - {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x813d, NULL, NULL, NULL, P3, "ASUS", "P5GDC Deluxe", 0, OK, intel_ich_gpio21_raise}, + {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x813d, "^P5GDC-V$", NULL, NULL, P3, "ASUS", "P5GDC-V Deluxe", 0, OK, intel_ich_gpio21_raise}, + {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x813d, "^P5GDC$", NULL, NULL, P3, "ASUS", "P5GDC Deluxe", 0, OK, intel_ich_gpio21_raise}, + {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x813d, NULL, NULL, NULL, P3, "ASUS", "P5GD2/C variants", 0, NT, intel_ich_gpio21_raise}, {0x8086, 0x27da, 0x1043, 0x8179, 0x8086, 0x27b8, 0x1043, 0x8179, "^P5LD2$", NULL, NULL, P3, "ASUS", "P5LD2", 0, NT, intel_ich_gpio16_raise}, {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, P3, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise}, {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, P3, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise}, diff --git a/print.c b/print.c index 21b4570..dfee33d 100644 --- a/print.c +++ b/print.c @@ -479,12 +479,15 @@ const struct board_info boards_known[] = { B("ASUS", "P5B-Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=bswT66IBSb2rEWNa", NULL), B("ASUS", "P5BV-M", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."), B("ASUS", "P5GC-MX/1333", 1, "http://www.asus.com/product.aspx?P_ID=PYvbfOokwxUzJky3", NULL), + B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/product.aspx?P_ID=50M49xQh71EZOeM1", NULL), + B("ASUS", "P5GD1(-VM)", 0, NULL, "Untested board enable."), B("ASUS", "P5GD2 Premium", 1, "http://www.asus.it/product.aspx?P_ID=lRKaz1Rb6Xb0OFM7", NULL), B("ASUS", "P5GDC Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=AbeoopyNpI2TZixg", NULL), + B("ASUS", "P5GDC-V Deluxe", 1, NULL, NULL), + B("ASUS", "P5GD2/C variants", 0, NULL, "Untested board enable."), B("ASUS", "P5KC", 1, "http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj", NULL), B("ASUS", "P5L-MX", 1, "http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH", NULL), B("ASUS", "P5LD2", 0, NULL, "Untested board enable."), - B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/product.aspx?P_ID=50M49xQh71EZOeM1", NULL), B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/product.aspx?P_ID=KyHOsOKWujC2QguJ", "Needs a board enable (http://patchwork.coreboot.org/patch/3298/)."), B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/product.aspx?P_ID=vBZLIBtPzYB2bLcb", NULL), B("ASUS", "P5ND2-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=WY7XroDuUImVbgp5", NULL), -- 1.7.1

1 0

SuperMicro X8DTU-6TF+: flashrom -Vr failed
by Scott Silverman 12 Aug '11

12 Aug '11

# ./flashrom -Vr ../current.bios flashrom v0.9.4-r1412 on Linux 2.6.29.6-sxtickless (x86_64), built with libpci 3.1.7, GCC 4.1.2 20080704 (Red Hat 4.1.2-50), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1523M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 998 us, 10000 myus = 9990 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Supermicro" DMI string system-product-name: "X8DTU-6+" DMI string system-version: "1234567890" DMI string baseboard-manufacturer: "Supermicro" DMI string baseboard-product-name: "X8DTU-6+" DMI string baseboard-version: "2.01" DMI string chassis-type: "Main Server Chassis" Found chipset "Intel ICH10R" with PCI ID 8086:3a16. Enabling flash write... 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0x460: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00002000 (FADDR) 0x50: 0x00001a1b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x1a, BRRA 0x1b 0x54: 0x00010000 (FREG0: Flash Descriptor) 0x00000000-0x00001fff is read-only 0x58: 0x03ff0200 (FREG1: BIOS) 0x00200000-0x003fffff is read-write 0x5C: 0x01ff0002 (FREG2: Management Engine) 0x00002000-0x001fffff is locked 0x60: 0x00001fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00001fff (FREG4: Platform Data) Platform Data region is unused. 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x04 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0x000000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 0x94: 0x3906 (PREOP) 0x96: 0xd43b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x3906019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done preop0=0x06, preop1=0x50 op[0]=0x02, 3, 0 op[1]=0x03, 2, 0 op[2]=0xd8, 3, 0 op[3]=0x05, 0, 0 op[4]=0x90, 2, 0 op[5]=0x01, 1, 0 op[6]=0x9f, 0, 0 op[7]=0xc7, 1, 0 SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Chip status register is 10 Found Atmel flash chip "AT25DF321A" (4096 kB, SPI) at physical address 0xffc00000. Ignoring security lockdown (if present) Ignoring status register byte 2 Chip status register is 10 Chip status register: Sector Protection Register Lock (SRPL) is not set Chip status register: Bit 6 is not set Chip status register: Erase/Program Error (EPE) is not set Chip status register: WP# pin (WPP) is not asserted Chip status register: Software Protection Status (SWP): no sectors are protected Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x2f, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x2f, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for SST SST25LF040A.RES, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0xff, id2 0xff Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x2f, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x2f, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x80, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x2f, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x2f, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x80, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x2f, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x2f, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x2f, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x2f, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x2f, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4701 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xff, id2 0xff === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Ignoring security lockdown (if present) Reading flash... Transaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 Running OPCODE 0x03 failed at address 0x002000 (payload length was 64). Read operation failed! FAILED. Restoring MMIO space at 0x7fe44a3648a0 Restoring MMIO space at 0x7fe44a36489c Restoring MMIO space at 0x7fe44a364898 Restoring MMIO space at 0x7fe44a364896 Restoring MMIO space at 0x7fe44a364894 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

[PATCH] Makefile: fix and simplify test program compilations
by Stefan Tauner 12 Aug '11

12 Aug '11

this was totally broken due to the time behavior of make's shell function's temporal behavior. quote from the gnu make documentation http://www.gnu.org/s/hello/manual/make/Shell-Function.html): "The commands run by calls to the shell function are run when the function calls are expanded" we have used the shell function to echo the test programs to a file. the file name used was equal for all tests and was overwritten for each test. the result was that all tests (in a single target?) used the last test program because the echoing of the test programs was done before all test compilations(!) also the branching for testing ifeq ($(CONFIG_FT2232_SPI), yes) was unnecessary. in my approach here i am using verbatim variables (allows to define even complex test programs in the makefile without jumping through hoops) that get exported to environment variables (via "export", reference afterwards with "$$<varname>"). i have also added the missing redirection of stderr to the compiler test. --- alternatively one could just use different file names of course, but i think my approach is superior due to the separation and readability of the tested code and the fact that the temporal behavior is MUCH clearer now (else this bug would have not crept in in the first place :P) if line count is an issue one could of course compress the test programs to something unreadable again :) side note: we use $(CC) all over the place before we even check if it is there. e.g.: override ARCH = $(strip $(shell LC_ALL=C $(CC) -E arch.h|grep -v '^\#')) this creates unwanted output like: make -j1 CC=eiugthes /bin/sh: eiugthes: not found /bin/sh: eiugthes: not found /bin/sh: eiugthes: not found /bin/sh: eiugthes: not found Checking for a C compiler... not found. make: *** [compiler] Error 1 Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- Makefile | 91 ++++++++++++++++++++++++++++++++++++++++---------------------- 1 files changed, 59 insertions(+), 32 deletions(-) diff --git a/Makefile b/Makefile index c72d10a..672a0df 100644 --- a/Makefile +++ b/Makefile @@ -531,11 +531,62 @@ distclean: clean strip: $(PROGRAM)$(EXEC_SUFFIX) $(STRIP) $(STRIP_ARGS) $(PROGRAM)$(EXEC_SUFFIX) +# below are the definitions of test programs as verbatim variables, which get +# exported to environment variables and are referenced with $$<varname> later +define COMPILER_TEST +int main(int argc, char **argv) +{ + (void) argafc; + (void) argv; + return 0; +} +endef +export COMPILER_TEST + +define LIBPCI_TEST +/* Avoid a failing test due to libpci header symbol shadowing breakage */ +#define index shadow_workaround_index +#include <pci/pci.h> +struct pci_access *pacc; +int main(int argc, char **argv) +{ + (void) argc; + (void) argv; + pacc = pci_alloc(); + return 0; +} +endef +export LIBPCI_TEST + +define FTDI_TEST +#include <ftdi.h> +struct ftdi_context *ftdic = NULL; +int main(int argc, char **argv) +{ + (void) argc; + (void) argv; + return ftdi_init(ftdic); +} +endef +export FTDI_TEST + +define UTSNAME_TEST +#include <sys/utsname.h> +struct utsname osinfo; +int main(int argc, char **argv) +{ + (void) argc; + (void) argv; + uname (&osinfo); + return 0; +} +endef +export UTSNAME_TEST + compiler: featuresavailable @printf "Checking for a C compiler... " - @$(shell ( echo "int main(int argc, char **argv)"; \ - echo "{ (void) argc; (void) argv; return 0; }"; ) > .test.c ) - @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test.c -o .test$(EXEC_SUFFIX) >/dev/null && \ + @echo "$$COMPILER_TEST" > .test.c + @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test.c -o .test$(EXEC_SUFFIX) >/dev/null 2>&1 && \ echo "found." || ( echo "not found."; \ rm -f .test.c .test$(EXEC_SUFFIX); exit 1) @rm -f .test.c .test$(EXEC_SUFFIX) @@ -548,12 +599,7 @@ compiler: featuresavailable ifeq ($(CHECK_LIBPCI), yes) pciutils: compiler @printf "Checking for libpci headers... " - @# Avoid a failing test due to libpci header symbol shadowing breakage - @$(shell ( echo "#define index shadow_workaround_index"; \ - echo "#include <pci/pci.h>"; \ - echo "struct pci_access *pacc;"; \ - echo "int main(int argc, char **argv)"; \ - echo "{ (void) argc; (void) argv; pacc = pci_alloc(); return 0; }"; ) > .test.c ) + @echo "$$LIBPCI_TEST" > .test.c @$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >/dev/null 2>&1 && \ echo "found." || ( echo "not found."; echo; \ echo "Please install libpci headers (package pciutils-devel)."; \ @@ -588,41 +634,22 @@ featuresavailable: @false endif -ifeq ($(CONFIG_FT2232_SPI), yes) features: compiler @echo "FEATURES := yes" > .features.tmp +ifeq ($(CONFIG_FT2232_SPI), yes) @printf "Checking for FTDI support... " - @$(shell ( echo "#include <ftdi.h>"; \ - echo "struct ftdi_context *ftdic = NULL;"; \ - echo "int main(int argc, char **argv)"; \ - echo "{ (void) argc; (void) argv; return ftdi_init(ftdic); }"; ) > .featuretest.c ) + @echo "$$FTDI_TEST" > .featuretest.c @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >/dev/null 2>&1 && \ ( echo "found."; echo "FTDISUPPORT := yes" >> .features.tmp ) || \ ( echo "not found."; echo "FTDISUPPORT := no" >> .features.tmp ) +endif @printf "Checking for utsname support... " - @$(shell ( echo "#include <sys/utsname.h>"; \ - echo "struct utsname osinfo;"; \ - echo "int main(int argc, char **argv)"; \ - echo "{ (void) argc; (void) argv; uname (&osinfo); return 0; }"; ) > .featuretest.c ) - @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >/dev/null 2>&1 && \ - ( echo "found."; echo "UTSNAME := yes" >> .features.tmp ) || \ - ( echo "not found."; echo "UTSNAME := no" >> .features.tmp ) - @$(DIFF) -q .features.tmp .features >/dev/null 2>&1 && rm .features.tmp || mv .features.tmp .features - @rm -f .featuretest.c .featuretest$(EXEC_SUFFIX) -else -features: compiler - @echo "FEATURES := yes" > .features.tmp - @printf "Checking for utsname support... " - @$(shell ( echo "#include <sys/utsname.h>"; \ - echo "struct utsname osinfo;"; \ - echo "int main(int argc, char **argv)"; \ - echo "{ (void) argc; (void) argv; uname (&osinfo); return 0; }"; ) > .featuretest.c ) + @echo "$$UTSNAME_TEST" > .featuretest.c @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >/dev/null 2>&1 && \ ( echo "found."; echo "UTSNAME := yes" >> .features.tmp ) || \ ( echo "not found."; echo "UTSNAME := no" >> .features.tmp ) @$(DIFF) -q .features.tmp .features >/dev/null 2>&1 && rm .features.tmp || mv .features.tmp .features @rm -f .featuretest.c .featuretest$(EXEC_SUFFIX) -endif install: $(PROGRAM)$(EXEC_SUFFIX) mkdir -p $(DESTDIR)$(PREFIX)/sbin -- 1.7.1

1 0

reading the bios on an asus P5VD2-MX
by Kurt Jaeger 12 Aug '11

12 Aug '11

Hi! See below. flashrom v0.9.3-r1205 on FreeBSD 8.1-RELEASE (i386), built with libpci 3.1.7, GCC 4.2.1 20070719 [FreeBSD], little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2033M loops per second, 10 myus = 12 us, 100 myus = 101 us, 1000 myus = 1001 us, 10000 myus = 10002 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: " " DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5VD2-MX" DMI string baseboard-version: "1.XX" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8712. Found chipset "VIA VT8237A", enabling flash write... chipset PCI ID is 1106:3337, OK. This chipset supports the following protocols: Non-SPI. Super I/O ID 0x8712 is not on the list of flash capable controllers. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x00, id2 0x0c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT49F020, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Bright BM29F040, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x00, id2 0x0c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x21, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x21, id2 0x2d Probing for Hyundai HY29F002T, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Hyundai HY29F002B, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Hyundai HY29F040A, 512 KB: probe_jedec_common: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Intel 28F001BN/BX-T, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: probe_82802ab: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 KB: probe_82802ab: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: probe_82802ab: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: probe_82802ab: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: probe_82802ab: id1 0x21, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: probe_82802ab: id1 0x21, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L1635E, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x00, id2 0x0c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x00, id2 0x0c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 KB: probe_jedec_common: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for MoselVitelic V29C51000T, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for MoselVitelic V29C51400B, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for MoselVitelic V29C51400T, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for MoselVitelic V29LC51000, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for MoselVitelic V29LC51001, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for MoselVitelic V29LC51002, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x00, id2 0x0c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M25PX32, 4096 KB: skipped. Probing for ST M25PX64, 8192 KB: skipped. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 KB: probe_m29f400bt: id1 0x21, id2 0x2d Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x21, id2 0x2d Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x00, id2 0x0c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0xea, id2 0x48, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x21, id2 0x72, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x5a, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W29C020(C)/W29C022, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W29C040/P, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W39V040(F)B, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W39V040(F)C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xda, id2 0x50 Found chip "Winbond W39V040(F)C" (512 KB, LPC) at physical address 0xfff80000. printlock_w39v040c: Boot block #TBL is unlocked, rest of chip #WP is unlocked. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W49F020, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xda, id2 0x50 Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... done. -- MfG/Best regards, Kurt Jaeger 9 years to go ! Dr.-Ing. Nepustil & Co. GmbH fon +49 7123 93006-0 pi(a)nepustil.net Rathausstr. 3 fax +49 7123 93006-99 72658 Bempflingen mob +49 171 3101372

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom