flashrom

flashrom@flashrom.org

5 participants
9186 discussions

needs board enable: jetway 865gdmp rev 1.0
by Stefan Tauner 20 Aug '11

20 Aug '11

http://paste.flashrom.org/view.php?id=770 superio http://paste.flashrom.org/view.php?id=769 lspci http://paste.flashrom.org/view.php?id=768 flash http://paste.flashrom.org/view.php?id=767 bin board owned by Андрей толстов aka andrei. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH 3/7] layout: Add -i <image>[:<file>] support
by David Hendricks 19 Aug '11

19 Aug '11

one minor nit On Fri, Aug 19, 2011 at 8:00 AM, Stefan Tauner < stefan.tauner(a)student.tuwien.ac.at> wrote: > +static int read_content_from_file(romlayout_t *entry, uint8_t > *newcontents) > +{ > + char *file; > + FILE *fp; > + int len; > + > + file = entry->file; > + len = entry->end - entry->start + 1; > + if (file[0] != '\0') { > + int numbytes; > + if ((fp = fopen(file, "rb")) == NULL) { > + perror(file); > Hmmmm, I'm not sure why we used perror()... Perhaps it would be better to use msg_gerr(strerror(errno))? > + return 1; > + } > + numbytes = fread(newcontents + entry->start, 1, len, fp); > + fclose(fp); > + if (numbytes != len) { > + perror(file); > same as above. -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

Re: [flashrom] [PATCH 2/7] Add deferred -i processing
by David Hendricks 19 Aug '11

19 Aug '11

Oops, disregard that last message. I was looking at find_romentry() and indeed it makes sense to return a negative value to indicate error since it returns an index otherwise. Acked-by: David Hendricks <dhendrix(a)google.com> On Fri, Aug 19, 2011 at 2:53 PM, David Hendricks <dhendrix(a)google.com>wrote: > Did you want to fix the inconsistent use of -1 instead of 1 as the return > code for some functions? > > Other than that it looks good (i'm biased, of course :-)) > > -- > David Hendricks (dhendrix) > Systems Software Engineer, Google Inc. > -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

Re: [flashrom] [PATCH 2/7] Add deferred -i processing
by David Hendricks 19 Aug '11

19 Aug '11

Did you want to fix the inconsistent use of -1 instead of 1 as the return code for some functions? Other than that it looks good (i'm biased, of course :-)) -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

[PATCH 7/7] (not for merge) Fix the "Use layout for verify operations too" patch in a hacky way
by Stefan Tauner 19 Aug '11

19 Aug '11

if you look at the second half of doit with this patch applied, it is quite clear, that most of it should be guarded by a huge if(write_it) clause. maybe move this into a function? Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- flashrom.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-) diff --git a/flashrom.c b/flashrom.c index 7a1a7ec..85135c2 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1992,7 +1992,7 @@ int doit(struct flashchip *flash, int force, const char *filename, int read_it, goto out; } - if (write_it || verify_it) { + if (write_it || verify_it) { /* always true: erase and read already goto'ed */ if (read_buf_from_file(newcontents, size, filename)) { ret = 1; goto out; @@ -2010,7 +2010,7 @@ int doit(struct flashchip *flash, int force, const char *filename, int read_it, * preserved, but in that case we might perform unneeded erase which * takes time as well. */ - if (read_all_first) { + if (read_all_first && write_it) { msg_cinfo("Reading old flash chip contents... "); if (flash->read(flash, oldcontents, 0, size)) { ret = 1; @@ -2021,7 +2021,8 @@ int doit(struct flashchip *flash, int force, const char *filename, int read_it, msg_cinfo("done.\n"); /* Build a new image from the given layout. */ - build_new_image(flash, read_all_first, oldcontents, newcontents); + if (write_it) + build_new_image(flash, read_all_first, oldcontents, newcontents); if (write_it && erase_and_write_flash(flash, oldcontents, newcontents)) { msg_cerr("Uh oh. Erase/write failed."); -- 1.7.1

1 0

[PATCH 6/7] Use layout for verify operations too
by Stefan Tauner 19 Aug '11

19 Aug '11

--- this still reads the whole image in at start... Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- flashrom.c | 29 +++++++++++++++++++++-------- 1 files changed, 21 insertions(+), 8 deletions(-) diff --git a/flashrom.c b/flashrom.c index 6e946ba..7a1a7ec 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1220,16 +1220,29 @@ notfound: int verify_flash(struct flashchip *flash, uint8_t *buf) { - int ret; int total_size = flash->total_size * 1024; + int ret = 0; + romlayout_t *l; - msg_cinfo("Verifying flash... "); - - ret = verify_range(flash, buf, 0, total_size, NULL); + msg_cinfo("Verifying... "); - if (!ret) - msg_cinfo("VERIFIED. \n"); + l = get_next_included_romentry(0); + /* No included rom entries. Assume complete verify wanted. */ + if (l == NULL) + ret = verify_range(flash, buf, 0, total_size, NULL); + else do { + unsigned int len = l->end - l->start + 1; + msg_gdbg2("Verifying \"%s\" 0x%08x - 0x%08x (%uB)... ", l->name, + l->start, l->end, len); + if(verify_range(flash, buf + l->start, l->start, len, NULL)) { + return 1; + } + msg_gdbg2("done. "); + l = get_next_included_romentry(l->end + 1); + } while (l != NULL); + if (ret == 0) + msg_cinfo("VERIFIED.\n"); return ret; } -- 1.7.1

1 0

[PATCH 5/7] Use layout for read operations too
by Stefan Tauner 19 Aug '11

19 Aug '11

Previously using layout files was useful for write operations only, for reads it was ignored. This patch added layout handling for reads. Based on the "Add -i <image>[:<file>] support" patch this one will output the selected regions to files. If the optional argument is given it is used as a file name, else the image name will be used. --- TODO: man page side note: the execution path of forced reads is wrong or at least worth a look. it does not use doit() but calls read_flash_to_file() directly. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- flash.h | 8 ++++++ flashrom.c | 75 ++++++++++++++++++++++++++++++++++++++++++++++++++++-------- layout.c | 8 ------ 3 files changed, 73 insertions(+), 18 deletions(-) diff --git a/flash.h b/flash.h index eb5f144..50e10b9 100644 --- a/flash.h +++ b/flash.h @@ -39,6 +39,13 @@ #define TIMEOUT_ERROR -101 typedef unsigned long chipaddr; +typedef struct { + unsigned int start; + unsigned int end; + unsigned int included; + char name[256]; + char file[256]; /* file == "" means not specified. */ +} romlayout_t; int register_shutdown(int (*function) (void *data), void *data); void *programmer_map_flash_region(const char *descr, unsigned long phys_addr, @@ -258,6 +265,7 @@ int cli_classic(int argc, char *argv[]); int register_include_arg(char *name); int process_include_args(void); int read_romlayout(char *name); +romlayout_t *get_next_included_romentry(unsigned int start); int build_new_image(struct flashchip *flash, int oldcontents_valid, uint8_t *oldcontents, uint8_t *newcontents); /* spi.c */ diff --git a/flashrom.c b/flashrom.c index 564d815..6e946ba 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1267,7 +1267,7 @@ int read_buf_from_file(unsigned char *buf, unsigned long size, return 0; } -int write_buf_to_file(unsigned char *buf, unsigned long size, +int write_dump_to_file(unsigned char *buf, unsigned long size, const char *filename) { unsigned long numbytes; @@ -1292,26 +1292,81 @@ int write_buf_to_file(unsigned char *buf, unsigned long size, return 0; } +int write_buf_to_file(unsigned char *buf, unsigned long size, + const char *filename) +{ + romlayout_t *l; + int ret = 0; + + ret = write_dump_to_file(buf, size, filename); + if (ret) + return ret; + + l = get_next_included_romentry(0); + + while (l != NULL) { + const char* name = (l->file[0] == '\0') ? l->name : l->file; + unsigned int len = l->end - l->start + 1; + msg_gdbg2("Writing \"%s\" to \"%s\" 0x%08x - 0x%08x (%uB)... ", + l->name, l->file, l->start, l->end, len); + if(write_dump_to_file(buf + l->start, len, name)) { + msg_gdbg2("failed. "); + return 1; + } + msg_gdbg2("done. "); + l = get_next_included_romentry(l->end + 1); + }; + + return 0; +} + +int read_flash_to_buf(struct flashchip *flash, uint8_t *buf) +{ + romlayout_t *l; + + if (!flash->read) { + msg_cerr("No read function available for this flash chip.\n"); + return 1; + } + + l = get_next_included_romentry(0); + /* No included rom entries. Assume complete readout wanted. */ + if (l == NULL) + return flash->read(flash, buf, 0, flash->total_size * 1024); + + do { + unsigned int len = l->end - l->start + 1; + msg_gdbg2("Reading \"%s\" 0x%08x - 0x%08x (%uB)... ", l->name, + l->start, l->end, len); + if(flash->read(flash, buf + l->start, l->start, len)) { + msg_gdbg2("failed. "); + return 1; + } + msg_gdbg2("done. "); + l = get_next_included_romentry(l->end + 1); + } while (l != NULL); + + return 0; +} + int read_flash_to_file(struct flashchip *flash, const char *filename) { unsigned long size = flash->total_size * 1024; - unsigned char *buf = calloc(size, sizeof(char)); int ret = 0; + uint8_t *buf; msg_cinfo("Reading flash... "); - if (!buf) { + + buf = calloc(size, sizeof(uint8_t)); + if (buf == NULL) { msg_gerr("Memory allocation failed!\n"); - msg_cinfo("FAILED.\n"); - return 1; - } - if (!flash->read) { - msg_cerr("No read function available for this flash chip.\n"); ret = 1; goto out_free; } - if (flash->read(flash, buf, 0, size)) { + + ret = read_flash_to_buf(flash, buf); + if (ret != 0) { msg_cerr("Read operation failed!\n"); - ret = 1; goto out_free; } diff --git a/layout.c b/layout.c index 2e386d6..ac1fa0d 100644 --- a/layout.c +++ b/layout.c @@ -34,14 +34,6 @@ static int romimages = 0; #define MAX_ROMLAYOUT 32 -typedef struct { - unsigned int start; - unsigned int end; - unsigned int included; - char name[256]; - char file[256]; /* file == "" means not specified. */ -} romlayout_t; - /* include_args lists arguments specified at the command line with -i. They * must be processed at some point so that desired regions are marked as * "included" in the rom_entries list. -- 1.7.1

1 0

[PATCH 4/7] Make read before write configurable (infrastructure part)
by Stefan Tauner 19 Aug '11

19 Aug '11

- Introduce a variable in doit() that allows to influence read-before-write and its consequences. - Rename handle_romentries to build_new_image and a description of its purpose. - Modify build_new_image so that it still works even if the old content is not read before. - Add copy_old_content() to ease the pain for future patches. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> --- TODO: add UI This is completely wrong. When the user wants to skip most of the chip AND wants to avoid the safety net, it makes no sense at all to read most of the chip in build_new_image. This is needed because the write/skip logic works by comparing the old content with the new content. In the case that old content is already known (because we have read the whole chip before), this is no problem and even nice from a architectural point of view. Allowing to skip the reading breaks the concept though. This patch provides the ugly code that is necessary so that this concept does not explode. It does not fix the concept itself. In the case the user wants to write the whole chip, this provides a real benefit. The smaller the region is that he wants to update, the smaller the benefit becomes. The real solution would be to provide the erase and write logic not just a complete image, from which it can deduce what it can and should skip, but also a layout-like map of what the user wants to be changed (or something similar that allows the following). If the old contents are known, then fine, but if not, read only the parts needed due to erase block overheads and not everything unnecessarily. --- flash.h | 2 +- flashrom.c | 42 ++++++++++++++++++++++-------------------- layout.c | 30 +++++++++++++++++++++++++----- 3 files changed, 48 insertions(+), 26 deletions(-) diff --git a/flash.h b/flash.h index f2988bc..eb5f144 100644 --- a/flash.h +++ b/flash.h @@ -258,7 +258,7 @@ int cli_classic(int argc, char *argv[]); int register_include_arg(char *name); int process_include_args(void); int read_romlayout(char *name); -int handle_romentries(struct flashchip *flash, uint8_t *oldcontents, uint8_t *newcontents); +int build_new_image(struct flashchip *flash, int oldcontents_valid, uint8_t *oldcontents, uint8_t *newcontents); /* spi.c */ struct spi_command { diff --git a/flashrom.c b/flashrom.c index ad1e042..564d815 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1871,6 +1871,7 @@ int doit(struct flashchip *flash, int force, const char *filename, int read_it, uint8_t *newcontents; int ret = 0; unsigned long size = flash->total_size * 1024; + int read_all_first = 1; /* FIXME: Make this configurable. */ if (chip_safety_check(flash, force, read_it, write_it, erase_it, verify_it)) { msg_cerr("Aborting.\n"); @@ -1937,28 +1938,27 @@ int doit(struct flashchip *flash, int force, const char *filename, int read_it, /* Read the whole chip to be able to check whether regions need to be * erased and to give better diagnostics in case write fails. - * The alternative would be to read only the regions which are to be + * The alternative is to read only the regions which are to be * preserved, but in that case we might perform unneeded erase which * takes time as well. */ - msg_cinfo("Reading old flash chip contents... "); - if (flash->read(flash, oldcontents, 0, size)) { - ret = 1; - msg_cinfo("FAILED.\n"); - goto out; + if (read_all_first) { + msg_cinfo("Reading old flash chip contents... "); + if (flash->read(flash, oldcontents, 0, size)) { + ret = 1; + msg_cinfo("FAILED.\n"); + goto out; + } } msg_cinfo("done.\n"); - // This should be moved into each flash part's code to do it - // cleanly. This does the job. - handle_romentries(flash, oldcontents, newcontents); + /* Build a new image from the given layout. */ + build_new_image(flash, read_all_first, oldcontents, newcontents); - // //////////////////////////////////////////////////////////// - - if (write_it) { - if (erase_and_write_flash(flash, oldcontents, newcontents)) { - msg_cerr("Uh oh. Erase/write failed. Checking if " - "anything changed.\n"); + if (write_it && erase_and_write_flash(flash, oldcontents, newcontents)) { + msg_cerr("Uh oh. Erase/write failed."); + if (read_all_first) { + msg_cerr("Checking if anything changed... "); if (!flash->read(flash, newcontents, 0, size)) { if (!memcmp(oldcontents, newcontents, size)) { msg_cinfo("Good. It seems nothing was " @@ -1967,11 +1967,13 @@ int doit(struct flashchip *flash, int force, const char *filename, int read_it, ret = 1; goto out; } - } - emergency_help_message(); - ret = 1; - goto out; - } + } else + msg_cerr("failed.\n"); + } else + msg_cerr("\n"); + emergency_help_message(); + ret = 1; + goto out; } if (verify_it) { diff --git a/layout.c b/layout.c index f5764c5..2e386d6 100644 --- a/layout.c +++ b/layout.c @@ -338,7 +338,26 @@ static int read_content_from_file(romlayout_t *entry, uint8_t *newcontents) return 0; } -int handle_romentries(struct flashchip *flash, uint8_t *oldcontents, uint8_t *newcontents) +static void copy_old_content(struct flashchip *flash, int oldcontents_valid, uint8_t *oldcontents, uint8_t *newcontents, unsigned int start, unsigned int size) +{ + if (!oldcontents_valid) { + /* oldcontents is a zero-filled buffer. By reading into + * oldcontents, we avoid a rewrite of identical regions even if + * an initial full chip read didn't happen. */ + msg_gdbg2("Read a chunk starting from 0x%06x (len=0x%06x).\n", + start, size); + flash->read(flash, oldcontents + start, start, size); + } + memcpy(newcontents + start, oldcontents + start, size); +} + +/** + * Modify @newcontents so that it contains the data that should be on the chip + * eventually. In the case the user wants to update only parts of it, copy + * the chunks to be preserved from @oldcontents to @newcontents. If @oldcontents + * is not valid, we need to fetch the current data from the chip first. + */ +int build_new_image(struct flashchip *flash, int oldcontents_valid, uint8_t *oldcontents, uint8_t *newcontents) { unsigned int start = 0; romlayout_t *entry; @@ -357,14 +376,15 @@ int handle_romentries(struct flashchip *flash, uint8_t *oldcontents, uint8_t *ne entry = get_next_included_romentry(start); /* No more romentries for remaining region? */ if (entry == NULL) { - memcpy(newcontents + start, oldcontents + start, - size - start); + copy_old_content(flash, oldcontents_valid, oldcontents, + newcontents, start, size - start); break; } /* For non-included region, copy from old content. */ if (entry->start > start) - memcpy(newcontents + start, oldcontents + start, - entry->start - start); + copy_old_content(flash, oldcontents_valid, oldcontents, + newcontents, start, + entry->start - start); /* For included region, copy from file if specified. */ if (read_content_from_file(entry, newcontents) < 0) return 1; -- 1.7.1

1 0

[PATCH 3/7] layout: Add -i <image>[:<file>] support
by Stefan Tauner 19 Aug '11

19 Aug '11

Add an optional sub-parameter to the -i parameter to allow building the image to be written from multiple files. This will also allow regions to be read from flash and written to separate image files in a later patch. --- TODO: man page Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- layout.c | 45 ++++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 44 insertions(+), 1 deletions(-) diff --git a/layout.c b/layout.c index 3e9fa0e..f5764c5 100644 --- a/layout.c +++ b/layout.c @@ -39,6 +39,7 @@ typedef struct { unsigned int end; unsigned int included; char name[256]; + char file[256]; /* file == "" means not specified. */ } romlayout_t; /* include_args lists arguments specified at the command line with -i. They @@ -183,6 +184,7 @@ int read_romlayout(char *name) rom_entries[romimages].start = strtol(tstr1, (char **)NULL, 16); rom_entries[romimages].end = strtol(tstr2, (char **)NULL, 16); rom_entries[romimages].included = 0; + strcpy(rom_entries[romimages].file, ""); romimages++; } @@ -220,14 +222,24 @@ int register_include_arg(char *name) static int find_romentry(char *name) { int i; + char *file = NULL; if (!romimages) return -1; - msg_gspew("Looking for region \"%s\"... ", name); + /* -i <image>[:<file>] */ + if (strtok(name, ":")) { + file = strtok(NULL, ""); + } + msg_gspew("Looking for region \"%s\" (file=\"%s\")... ", + name, file ? file : "<not specified>"); + for (i = 0; i < romimages; i++) { if (!strcmp(rom_entries[i].name, name)) { rom_entries[i].included = 1; + snprintf(rom_entries[i].file, + sizeof(rom_entries[i].file), + "%s", file ? file : ""); msg_gspew("found.\n"); return i; } @@ -299,6 +311,33 @@ romlayout_t *get_next_included_romentry(unsigned int start) return best_entry; } +/* If a file name is specified for this region, read the file contents and + * overwrite @newcontents in the range specified by @entry. + */ +static int read_content_from_file(romlayout_t *entry, uint8_t *newcontents) +{ + char *file; + FILE *fp; + int len; + + file = entry->file; + len = entry->end - entry->start + 1; + if (file[0] != '\0') { + int numbytes; + if ((fp = fopen(file, "rb")) == NULL) { + perror(file); + return 1; + } + numbytes = fread(newcontents + entry->start, 1, len, fp); + fclose(fp); + if (numbytes != len) { + perror(file); + return 1; + } + } + return 0; +} + int handle_romentries(struct flashchip *flash, uint8_t *oldcontents, uint8_t *newcontents) { unsigned int start = 0; @@ -326,6 +365,10 @@ int handle_romentries(struct flashchip *flash, uint8_t *oldcontents, uint8_t *ne if (entry->start > start) memcpy(newcontents + start, oldcontents + start, entry->start - start); + /* For included region, copy from file if specified. */ + if (read_content_from_file(entry, newcontents) < 0) + return 1; + /* Skip to location after current romentry. */ start = entry->end + 1; /* Catch overflow. */ -- 1.7.1

1 0

[PATCH 2/7] Add deferred -i processing
by Stefan Tauner 19 Aug '11

19 Aug '11

The general idea and most of the code is stolen from chromiumos: 8fc0740356ca15d02fb1c65ab43b10844f148c3b bb9049c66ca55e0dc621dd2c70b5d2cb6e5179bf Signed-off-by: Louis Yung-Chieh Lo <yjlou(a)chromium.org> and the main part: d0ea9ed71e7f86bb8e8db2ca7c32a96de25343d8 Signed-off-by: David Hendricks <dhendrix(a)chromium.org> My implementation does not defer the processing until doit(), but after the argument parsing loop only (doit() should not contain argument checks). This allows to specify -i and -l parameters in any order. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- cli_classic.c | 10 +++---- flash.h | 3 +- layout.c | 85 ++++++++++++++++++++++++++++++++++++++++++++++++--------- 3 files changed, 78 insertions(+), 20 deletions(-) diff --git a/cli_classic.c b/cli_classic.c index 5d35738..1980de4 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -226,14 +226,9 @@ int cli_classic(int argc, char *argv[]) cli_classic_abort_usage(); break; case 'i': - /* FIXME: -l has to be specified before -i. */ tempstr = strdup(optarg); - if (find_romentry(tempstr) < 0) { - fprintf(stderr, "Error: image %s not found in " - "layout file or -i specified before " - "-l\n", tempstr); + if (register_include_arg(tempstr)) cli_classic_abort_usage(); - } break; case 'L': if (++operation_specified > 1) { @@ -318,6 +313,9 @@ int cli_classic(int argc, char *argv[]) cli_classic_abort_usage(); } + if (process_include_args()) + cli_classic_abort_usage(); + /* FIXME: Print the actions flashrom will take. */ if (list_supported) { diff --git a/flash.h b/flash.h index 4b1cca2..f2988bc 100644 --- a/flash.h +++ b/flash.h @@ -255,8 +255,9 @@ int print(int type, const char *fmt, ...) __attribute__((format(printf, 2, 3))); int cli_classic(int argc, char *argv[]); /* layout.c */ +int register_include_arg(char *name); +int process_include_args(void); int read_romlayout(char *name); -int find_romentry(char *name); int handle_romentries(struct flashchip *flash, uint8_t *oldcontents, uint8_t *newcontents); /* spi.c */ diff --git a/layout.c b/layout.c index 247c897..3e9fa0e 100644 --- a/layout.c +++ b/layout.c @@ -41,6 +41,12 @@ typedef struct { char name[256]; } romlayout_t; +/* include_args lists arguments specified at the command line with -i. They + * must be processed at some point so that desired regions are marked as + * "included" in the rom_entries list. + */ +static char *include_args[MAX_ROMLAYOUT]; +static int num_include_args = 0; /* the number of valid entries. */ static romlayout_t rom_entries[MAX_ROMLAYOUT]; #if CONFIG_INTERNAL == 1 /* FIXME: Move the whole block to cbtable.c? */ @@ -156,10 +162,8 @@ int read_romlayout(char *name) if (romimages >= MAX_ROMLAYOUT) { msg_gerr("Maximum number of ROM images (%i) in layout " - "file reached before end of layout file.\n", - MAX_ROMLAYOUT); - msg_gerr("Ignoring the rest of the layout file.\n"); - break; + "file reached.\n", MAX_ROMLAYOUT); + return 1; } if (2 != fscanf(romlayout, "%s %s\n", tempstr, rom_entries[romimages].name)) continue; @@ -194,27 +198,80 @@ int read_romlayout(char *name) } #endif -int find_romentry(char *name) +/* register an include argument (-i) for later processing */ +int register_include_arg(char *name) +{ + if (num_include_args >= MAX_ROMLAYOUT) { + msg_gerr("Too many regions included (%i).\n", num_include_args); + return 1; + } + + if (name == NULL) { + msg_gerr("<NULL> is a bad region name.\n"); + return 1; + } + + include_args[num_include_args] = name; + num_include_args++; + return 0; +} + +/* returns the index of the entry (or a negative value if it is not found) */ +static int find_romentry(char *name) { int i; if (!romimages) return -1; - msg_ginfo("Looking for \"%s\"... ", name); - + msg_gspew("Looking for region \"%s\"... ", name); for (i = 0; i < romimages; i++) { if (!strcmp(rom_entries[i].name, name)) { rom_entries[i].included = 1; - msg_ginfo("found.\n"); + msg_gspew("found.\n"); return i; } } - msg_ginfo("not found.\n"); // Not found. Error. - + msg_gspew("not found.\n"); return -1; } +/* process -i arguments + * returns 0 to indicate success, >0 to indicate failure + */ +int process_include_args(void) +{ + int i; + unsigned int found = 0; + + if (num_include_args == 0) + return 0; + + for (i = 0; i < num_include_args; i++) { + /* User has specified an area, but no layout file is loaded. */ + if (!romimages) { + msg_gerr("Region requested (with -i \"%s\"), " + "but no layout data is available.\n", + include_args[i]); + return 1; + } + + if (find_romentry(include_args[i]) < 0) { + msg_gerr("Invalid region specified: \"%s\"\n", + include_args[i]); + return 1; + } + found++; + } + + msg_ginfo("Using region%s: \"%s\"", num_include_args > 1 ? "s" : "", + include_args[0]); + for (i = 1; i < num_include_args; i++) + msg_ginfo(", \"%s\"", include_args[i]); + msg_ginfo(".\n"); + return 0; +} + romlayout_t *get_next_included_romentry(unsigned int start) { int i; @@ -248,11 +305,12 @@ int handle_romentries(struct flashchip *flash, uint8_t *oldcontents, uint8_t *ne romlayout_t *entry; unsigned int size = flash->total_size * 1024; - /* If no layout file was specified or the layout file was empty, assume - * that the user wants to flash the complete new image. + /* If no regions were specified for inclusion, assume + * that the user wants to write the complete new image. */ - if (!romimages) + if (num_include_args == 0) return 0; + /* Non-included romentries are ignored. * The union of all included romentries is used from the new image. */ @@ -264,6 +322,7 @@ int handle_romentries(struct flashchip *flash, uint8_t *oldcontents, uint8_t *ne size - start); break; } + /* For non-included region, copy from old content. */ if (entry->start > start) memcpy(newcontents + start, oldcontents + start, entry->start - start); -- 1.7.1

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom