flashrom February 2016

flashrom@flashrom.org

26 participants
96 discussions

Support for Intel I350 card.
by Grzegorz Hetman 21 Feb '16

21 Feb '16

Hello ;) I have a card called: 05:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01) 05:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01) 05:00.2 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01) 05:00.3 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01) I update nicintel_spi.c to match product ID but when I try to probe it, flashroom freeze after a while: ./flashrom -VVV -p nicintel_spi:pci='05:00.0' -o probe.log flashrom v0.9.8-r1916 on Linux 4.2.2-coreos-r1 (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.2.1, GCC 4.8.4, little endian Command line (5 args): ./flashrom -VVV -p nicintel_spi:pci=05:00.0 -o probe.log Calibrating delay loop... OS timer resolution is 1 usecs, 1224M loops per second, 10 myus = 10 us, 100 myus = 102 us, 1000 myus = 1028 us, 10000 myus = 9996 us, 4 myus = 16 us, OK. Initializing nicintel_spi programmer Found "Intel I350 Gigabit Network Connection (rev 01)" (8086:1521, BDF 05:00.0). === This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output to flashrom(a)flashrom.org if it works for you. Please add the name of your PCI device to the subject. Thank you for your help! === PCI header type 0x00 Requested BAR is of type MEM, 32bit, not prefetchable PCI header type 0x00 Requested BAR is of type MEM, 32bit, not prefetchable page_size=1000 pre-rounding: start=0x00000000dfb70000, len=0x1000, end=0x00000000dfb71000 post-rounding: start=0x00000000dfb70000, len=0x1000, end=0x00000000dfb71000 Datasheet for this chipset can be found here: http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/ethe… Also I found: https://downloadcenter.intel.com/download/19186/Intel-Ethernet-Connections-… When run it: ./bootutil64e Intel(R) Ethernet Flash Firmware Utility BootUtil version 1.5.72.1 Copyright (C) 2003-2015 Intel Corporation Type BootUtil -? for help Port Network Address Location Series WOL Flash Firmware Version ==== =============== ======== ======= === ============================= ======= 1 002590E72B10 5:00.0 Gigabit YES FLASH Not Present 2 002590E72B11 5:00.1 Gigabit NO FLASH Not Present 3 002590E72B12 5:00.2 Gigabit NO FLASH Not Present 4 002590E72B13 5:00.3 Gigabit NO FLASH Not Present Any chance to have support for this card by flashroom ? Best Regards, Grzegorz Hetman.

2 1

Supports flash rom qnap devices
by forensic.technologie 21 Feb '16

21 Feb '16

Supports flash rom also Qanp nas devices . If so you could describe how. Thank you very much

2 1

Confirmed working devices, Intel 82599ES - Hewlett-Packard Company Ethernet 10Gb 2-port 560SFP+ Adapter
by Tom Eichhorn 21 Feb '16

21 Feb '16

Hi, flashrom works like a charm on the device mentioned in the subject: root@cbk130544:~# flashrom -p nicintel_spi:pci=05:00.0 flashrom v0.9.8-r1888 on Linux 4.4.0-2-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. === This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output to flashrom(a)flashrom.org if it works for you. Please add the name of your PCI device to the subject. Thank you for your help! === Found Atmel flash chip "AT25DF041A" (512 kB, SPI) on nicintel_spi. No operations were specified. There is also a variant with a different flash chips, which works fine: root@cbk130644:~# sudo flashrom -p nicintel_spi:pci=05:00.0 flashrom v0.9.8-r1888 on Linux 4.4.0-2-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. === This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output to flashrom(a)flashrom.org if it works for you. Please add the name of your PCI device to the subject. Thank you for your help! === Found SST flash chip "SST25VF040B" (512 kB, SPI) on nicintel_spi. Found SST flash chip "SST25VF040B.REMS" (512 kB, SPI) on nicintel_spi. Multiple flash chip definitions match the detected chip(s): "SST25VF040B", "SST25VF040B.REMS" Please specify which chip definition to use with the -c <chipname> option. Thanks for the great work! Tom -- SysEleven GmbH Umspannwerk - Aufgang C Ohlauer Straße 43 10999 Berlin Tel +49 30 233 2012 0 Fax +49 30 616 755 50 http://www.syseleven.de http://www.facebook.com/SysEleven Firmensitz: Berlin Registergericht: AG Berlin Charlottenburg, HRB 108571 B Geschäftsführer: Marc Korthaus, Jens Ihlenfeld

2 1

two supported/tested asrock boards
by 2ytvpw+a518af1s6j3bg＠guerrillamail.com 21 Feb '16

21 Feb '16

Those two boards are working fine with flashrom (read and write with internal flasher): Asrock Fatal1ty 970 Performance http://www.asrock.com/mb/AMD/Fatal1ty%20970%20Performance/ and Asrock P4i65G http://www.asrock.com/mb/Intel/P4i65G/ ---- Sent using GuerrillaMail.com Block or report abuse: https://www.guerrillamail.com/abuse/?a=R011FgUSTLk1jgK143YNfRmJQtiX

2 1

[PATCH] makefile: allow to disable all default-yes config variables with CONFIG_NOTHING=yes.
by Stefan Tauner 21 Feb '16

21 Feb '16

All credit for this should be given to Patrick Georgi (see r1869). Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> --- Makefile | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Makefile b/Makefile index 095a49c..976d7ba 100644 --- a/Makefile +++ b/Makefile @@ -541,6 +541,13 @@ CONFIG_CH341A_SPI ?= yes # Disable wiki printing by default. It is only useful if you have wiki access. CONFIG_PRINT_WIKI ?= no +# Disable all features if CONFIG_NOTHING=yes is given +ifeq ($(CONFIG_NOTHING), yes) +$(foreach var, $(filter CONFIG_%, $(.VARIABLES)),\ + $(if $(filter yes, $($(var))),\ + $(eval $(var)=no))) +endif + # Enable all features if CONFIG_EVERYTHING=yes is given ifeq ($(CONFIG_EVERYTHING), yes) $(foreach var, $(filter CONFIG_%, $(.VARIABLES)),\ -- Kind regards, Stefan Tauner

1 0

[commit] r1938 - trunk
by repository service 21 Feb '16

21 Feb '16

Author: stefanct Date: Sun Feb 21 12:18:24 2016 New Revision: 1938 URL: http://flashrom.org/trac/flashrom/changeset/1938 Log: Automatically disable atapromise for libpayload as well. The atapromise module uses the rom_size field of the struct pci_dev found in pci.h that does not exist in libpayload's implementation and thus does not compile with libpayload. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Sun Feb 21 01:21:11 2016 (r1937) +++ trunk/Makefile Sun Feb 21 12:18:24 2016 (r1938) @@ -292,6 +292,12 @@ else override CONFIG_DUMMY = no endif +# libpayload does not provide the romsize field in struct pci_dev that the atapromise code requires. +ifeq ($(CONFIG_ATAPROMISE), yes) +UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes +else +override CONFIG_ATAPROMISE = no +endif # Bus Pirate, Serprog and PonyProg are not supported with libpayload (missing serial support). ifeq ($(CONFIG_BUSPIRATE_SPI), yes) UNSUPPORTED_FEATURES += CONFIG_BUSPIRATE_SPI=yes

1 0

[PATCH] Add support for GigaDevice GD25VQ41B
by Hatim Kanchwala 21 Feb '16

21 Feb '16

Here's the updated patch which incorporates Urja's suggestion. I have also fixed the (nasty :p) typo I made earlier. Signed-off-by: Hatim Kanchwala <hatim(a)hatimak.me> --- flashchips.c | 40 ++++++++++++++++++++++++++++++++++++++++ flashchips.h | 1 + 2 files changed, 41 insertions(+) diff --git a/flashchips.c b/flashchips.c index c60514b..99b79db 100644 --- a/flashchips.c +++ b/flashchips.c @@ -6243,26 +6243,66 @@ const struct flashchip flashchips[] = { }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { + .vendor = "GigaDevice", + .name = "GD25VQ41B", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25VQ41B, + .total_size = 512, + .page_size = 256, + /* Lockable Security Registers: 3 * 512B total; read 0x48, write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: 2nd Status Register; read 0x35 */ + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2300, 3600}, + }, + + { .vendor = "Hyundai", .name = "HY29F002T", .bustype = BUS_PARALLEL, .manufacture_id = HYUNDAI_ID, .model_id = HYUNDAI_HY29F002T, .total_size = 256, .page_size = 256 * 1024, .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ .tested = TEST_OK_PRE, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { diff --git a/flashchips.h b/flashchips.h index 74c44a0..e469363 100644 --- a/flashchips.h +++ b/flashchips.h @@ -368,26 +368,27 @@ #define GIGADEVICE_GD25Q20 0x4012 /* Same as GD25QB */ #define GIGADEVICE_GD25Q40 0x4013 /* Same as GD25QB */ #define GIGADEVICE_GD25Q80 0x4014 /* Same as GD25Q80B (which has OTP) */ #define GIGADEVICE_GD25Q16 0x4015 /* Same as GD25Q16B (which has OTP) */ #define GIGADEVICE_GD25Q32 0x4016 /* Same as GD25Q32B */ #define GIGADEVICE_GD25Q64 0x4017 /* Same as GD25Q64B */ #define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B only? */ #define GIGADEVICE_GD25LQ40 0x6013 #define GIGADEVICE_GD25LQ80 0x6014 #define GIGADEVICE_GD25LQ16 0x6015 #define GIGADEVICE_GD25LQ32 0x6016 #define GIGADEVICE_GD25LQ64 0x6017 /* Same as GD25LQ64B (which is faster) */ #define GIGADEVICE_GD25LQ128 0x6018 +#define GIGADEVICE_GD25VQ41B 0x4213 #define GIGADEVICE_GD29GL064CAB 0x7E0601 #define HYUNDAI_ID 0xAD /* Hyundai */ #define HYUNDAI_HY29F400T 0x23 /* Same as HY29F400AT */ #define HYUNDAI_HY29F800B 0x58 /* Same as HY29F800AB */ #define HYUNDAI_HY29LV800B 0x5B #define HYUNDAI_HY29F040A 0xA4 #define HYUNDAI_HY29F400B 0xAB /* Same as HY29F400AB */ #define HYUNDAI_HY29F002B 0x34 #define HYUNDAI_HY29F002T 0xB0 #define HYUNDAI_HY29LV400T 0xB9 #define HYUNDAI_HY29LV400B 0xBA #define HYUNDAI_HY29F080 0xD5 -- Regards, Hatim Kanchwala http://hatimak.me B. Tech. Electrical Engineering Indian Institute of Technology Patna

2 2

[PATCH] Add support for GigaDevice GD25Q128C
by Hatim Kanchwala 21 Feb '16

21 Feb '16

Signed-off-by: Hatim Kanchwala <hatim(a)hatimak.me> --- flashchips.c | 41 +++++++++++++++++++++++++++++++++++++++++ flashchips.h | 3 ++- 2 files changed, 43 insertions(+), 1 deletion(-) diff --git a/flashchips.c b/flashchips.c index 26a8d89..12c5c62 100644 --- a/flashchips.c +++ b/flashchips.c @@ -6206,26 +6206,67 @@ const struct flashchip flashchips[] = { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", + .name = "GD25Q128C", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q128, + .total_size = 16384, + .page_size = 256, + /* OTP: 3 * 512B total; read 0x48; write 0x42, erase 0x44 */ + /* QPI: enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 512} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: 2nd status reg (read 0x35, write 0x31) and 3rd status reg (read 0x15, write 0x11) */ + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", .name = "GD25T80", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25T80, .total_size = 1024, .page_size = 256, /* OTP: 256B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { diff --git a/flashchips.h b/flashchips.h index e469363..3ab1e07 100644 --- a/flashchips.h +++ b/flashchips.h @@ -361,27 +361,28 @@ #define FUJITSU_MBM29LV160BE 0x49 /* 16 b mode 0x2249 */ #define FUJITSU_MBM29LV160TE 0xC4 /* 16 b mode 0x22C4 */ #define GIGADEVICE_ID 0xC8 /* GigaDevice */ #define GIGADEVICE_GD25T80 0x3114 #define GIGADEVICE_GD25Q512 0x4010 #define GIGADEVICE_GD25Q10 0x4011 #define GIGADEVICE_GD25Q20 0x4012 /* Same as GD25QB */ #define GIGADEVICE_GD25Q40 0x4013 /* Same as GD25QB */ #define GIGADEVICE_GD25Q80 0x4014 /* Same as GD25Q80B (which has OTP) */ #define GIGADEVICE_GD25Q16 0x4015 /* Same as GD25Q16B (which has OTP) */ #define GIGADEVICE_GD25Q32 0x4016 /* Same as GD25Q32B */ #define GIGADEVICE_GD25Q64 0x4017 /* Same as GD25Q64B */ -#define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B only? */ +#define GIGADEVICE_GD25Q128 0x4018 /* Same as GD25Q128B and GD25Q128C (distinguish by RES/REMS) */ +#define GIGADEVICE_GD25Q128C 0x17 #define GIGADEVICE_GD25LQ40 0x6013 #define GIGADEVICE_GD25LQ80 0x6014 #define GIGADEVICE_GD25LQ16 0x6015 #define GIGADEVICE_GD25LQ32 0x6016 #define GIGADEVICE_GD25LQ64 0x6017 /* Same as GD25LQ64B (which is faster) */ #define GIGADEVICE_GD25LQ128 0x6018 #define GIGADEVICE_GD25VQ41B 0x4213 #define GIGADEVICE_GD29GL064CAB 0x7E0601 #define HYUNDAI_ID 0xAD /* Hyundai */ #define HYUNDAI_HY29F400T 0x23 /* Same as HY29F400AT */ #define HYUNDAI_HY29F800B 0x58 /* Same as HY29F800AB */ #define HYUNDAI_HY29LV800B 0x5B -- Regards, Hatim Kanchwala http://hatimak.me B. Tech. Electrical Engineering Indian Institute of Technology Patna

2 4

[commit] r1937 - trunk
by repository service 21 Feb '16

21 Feb '16

Author: stefanct Date: Sun Feb 21 01:21:11 2016 New Revision: 1937 URL: http://flashrom.org/trac/flashrom/changeset/1937 Log: Add support for GigaDevice GD25VQ41B and GD25Q128C. Signed-off-by: Hatim Kanchwala <hatim(a)hatimak.me> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sat Feb 20 23:28:16 2016 (r1936) +++ trunk/flashchips.c Sun Feb 21 01:21:11 2016 (r1937) @@ -6216,6 +6216,47 @@ { .vendor = "GigaDevice", + .name = "GD25Q128C", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q128, + .total_size = 16384, + .page_size = 256, + /* OTP: 1536B total; read 0x48; write 0x42, erase 0x44 */ + /* QPI: enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 512} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: 2nd status reg (read 0x35, write 0x31) and 3rd status reg (read 0x15, write 0x11) */ + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", .name = "GD25T80", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, @@ -6253,6 +6294,46 @@ }, { + .vendor = "GigaDevice", + .name = "GD25VQ41B", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25VQ41B, + .total_size = 512, + .page_size = 256, + /* OTP: 1536B total; read 0x48, write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: 2nd Status Register; read 0x35 */ + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2300, 3600}, + }, + + { .vendor = "Hyundai", .name = "HY29F002T", .bustype = BUS_PARALLEL, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Sat Feb 20 23:28:16 2016 (r1936) +++ trunk/flashchips.h Sun Feb 21 01:21:11 2016 (r1937) @@ -371,13 +371,14 @@ #define GIGADEVICE_GD25Q16 0x4015 /* Same as GD25Q16B (which has OTP) */ #define GIGADEVICE_GD25Q32 0x4016 /* Same as GD25Q32B */ #define GIGADEVICE_GD25Q64 0x4017 /* Same as GD25Q64B */ -#define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B only? */ +#define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B and GD25Q128C only, can be distinguished by SFDP */ #define GIGADEVICE_GD25LQ40 0x6013 #define GIGADEVICE_GD25LQ80 0x6014 #define GIGADEVICE_GD25LQ16 0x6015 #define GIGADEVICE_GD25LQ32 0x6016 #define GIGADEVICE_GD25LQ64 0x6017 /* Same as GD25LQ64B (which is faster) */ #define GIGADEVICE_GD25LQ128 0x6018 +#define GIGADEVICE_GD25VQ41B 0x4213 #define GIGADEVICE_GD29GL064CAB 0x7E0601 #define HYUNDAI_ID 0xAD /* Hyundai */

1 0

Fwd: unlocked optiplex 3010 flash with me_clr jumper
by Jason Salopek 21 Feb '16

21 Feb '16

Hi, I am trying to unbrick a optiplex 3010 for a customer and I made a interesting discovery while trying to dump the bios from a working unit. If you change the me_clr jumper from the normal 2_3 position, to 1_2 and boot the system up, you get a "warning service mode enabled press f1" and then you can continue to bootup. With this set, I was able to use flashrom to read out the entire flash chip (this may or may not be 100% true but will still help me) I am attaching 2 files that show the difference between the 2 jumper settings. After this weekend crisis with this customer pc, I am willing to try this jumper trick on other optiplexes I have if you wish, 360, 755? I think You guys helped me get a little further on this rescue and I appreciate the help and info over the yrs Sincerely Jason J Salopek aka "flyback" --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

1 0

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom February 2016