flashrom February 2016

flashrom@flashrom.org

26 participants
96 discussions

Re: [flashrom] about GIGABYTE GA-X58A-UD3R board
by Stefan Tauner 22 Feb '16

22 Feb '16

On Fri, 19 Feb 2016 13:25:57 +0900 げんまいこ <gennmaiko(a)gmail.com> wrote: > Hi, > I have read this article > http://www.coreboot.org/FAQ#Will_coreboot_work_on_my_machine.3F > And I will send my Step1-6. Hi, the wiki points you to the coreboot mailing list but you sent your mail to the flashrom mailing list instead... -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

W836xx: Biostar A68N-2100: flashrom -V
by Moritz Wilhelmy 22 Feb '16

22 Feb '16

Just in case nobody posted flashrom -V output for this board yet, please see below. Cheers, Moritz ____ flashrom v0.9.7-r1852 on Linux 4.3.0-0.bpo.1-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.1, GCC 4.9.2, little endian Command line (3 args): flashrom -V -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 332M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 999 us, 10000 myus = 10007 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "BIOSTAR Group" DMI string system-product-name: "A68N-2100" DMI string system-version: " " DMI string baseboard-manufacturer: "BIOSTAR Group" DMI string baseboard-product-name: "A68N-2100" DMI string baseboard-version: " " Found ITE Super I/O, ID 0x8728 on port 0x2e Found chipset "AMD FCH" with PCI ID 1022:780e. Enabling flash write... SPI base address is at 0xfec10000 Yangtze detected. SpiRomEnable=1, RouteTpm2Sp=0, PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1 (0x6fcc2305) SpiArbEnable=1, IllegalAccess=0, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=7, SpiBusy=0 Using SPI_CS0 GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK SpiReadMode=Fast Read (7) Setting read mode to "Normal (up to 66 MHz)" succeeded. UseSpi100 is enabled NormSpeedNew is 33 MHz FastSpeedNew is 66 MHz AltSpeedNew is 16.5 MHz TpmSpeedNew is 16.5 MHz Setting SPI clock to 16.5 MHz (0x3). IMC is not active. ROM strap override is not active OK. No IT87* serial flash segment enabled. The following protocols are supported: LPC, FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25DL081, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25DL161, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT45DB321E, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for ESMT F25L32PA, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Found GigaDevice flash chip "GD25Q32(B)" (4096 kB, SPI) mapped at physical address 0x00000000ffc00000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Block Protect 4 (BP4) is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX23L1654, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX23L3254, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX23L6454, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX23L12854, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L3273E, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L6445E/MX25L6473E, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix MX25U12835F, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for PMC Pm25LV010, 128 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Sanyo LE25FW106, 128 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for Sanyo LE25FW406A, 512 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for Sanyo LE25FU406B, 512 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL132K, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL164K, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL128P......0, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL128P......1, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL128S......1, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL129P......0, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Spansion S25FL129P......1, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for SST SST25LF020A, 256 kB: probe_spi_rems: id1 0xc8, id2 0x15 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF512(A), 64 kB: probe_spi_rems: id1 0xc8, id2 0x15 Probing for SST SST25VF010(A), 128 kB: probe_spi_rems: id1 0xc8, id2 0x15 Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0xc8, id2 0x15 Probing for SST SST25VF020B, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xc8, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc8, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for SST SST25WF080, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25Q40.V, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc8, id2 0x15 Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH00B4, 512 kB: probe_82802ab: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH004, 512 kB: probe_82802ab: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xd3, id2 0xd2, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xd3, id2 0xd2, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xd3, id2 0xd2, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xd3, id2 0xd2, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xfc, id2 0x8b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found GigaDevice flash chip "GD25Q32(B)" (4096 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). No operations were specified. Restoring MMIO space at 0x7fa8da06f022 Restoring MMIO space at 0x7fa8da06f000

1 0

Re: [flashrom] BIOS update using flashrom on an UEFI system
by Lakesh_Sharma＠DELL.com 22 Feb '16

22 Feb '16

layout file option is being explored by our team. regards lakesh ________________________________________ From: David Hendricks [dhendrix(a)google.com] Sent: Thursday, February 18, 2016 2:57 PM To: Sharma, Lakesh Cc: flashrom Subject: Re: [flashrom] BIOS update using flashrom on an UEFI system Hi Lakesh, Did you ever find a solution for this? Probably the quickest solution is to figure out where the config data resides and write to the regions around it using a layout file. It's an interesting problem that I suspect we'll see more often in the future, not just with UEFI. Storage of config data on the firmware ROM is becoming more common, and the firmware update utility of choice needs to become more aware of what portions of the ROM are safe to overwrite. For ChromeOS platforms, we added a blob that maps the ROM content (flashmap, or fmap for short) so that our update scripts know which regions of the ROM to target when updating. I'm not sure what the best way to do this for other systems, though. AFAIK this is all vendor-specific. On Tue, Feb 9, 2016 at 6:21 PM, <Lakesh_Sharma(a)dell.com<mailto:Lakesh_Sharma@dell.com>> wrote: In an UEFI based system (x86_64, Rangeley cpu), the bios bootup option shows each UEFI partition. Where as in legacy bios mode, the bios bootup menu would show just SSD, USB etc. In case of UEFI system, the boot-order, boot-current etc (i.e. UEFI config data) is stored in bios area ? When we update bios using flashrom, we are seeing that the UEFI config data is getting lost/over-written. Because of which, bios does not know that it is running on uefi system and probably tries to invoke grub using legacy way, which hangs. How can we instruct flashrom to not over-write UEFI config data in bios area. regards lakesh _______________________________________________ flashrom mailing list flashrom(a)flashrom.org<mailto:flashrom@flashrom.org> http://www.flashrom.org/mailman/listinfo/flashrom -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

[PATCH] pickit2_spi: use ordinary USB devs array.
by Stefan Tauner 21 Feb '16

21 Feb '16

Even though there is currently only one USB device ID in the wild using our standard way to define the devices creates nicer output for -L and -z. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> --- flashrom.c | 5 ++--- pickit2_spi.c | 13 +++++++++---- programmer.h | 1 + 3 files changed, 12 insertions(+), 7 deletions(-) diff --git a/flashrom.c b/flashrom.c index 7bdfb73..d671003 100644 --- a/flashrom.c +++ b/flashrom.c @@ -382,9 +382,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_PICKIT2_SPI == 1 { .name = "pickit2_spi", - .type = OTHER, - /* FIXME */ - .devs.note = "Microchip PICkit2\n", + .type = USB, + .devs.dev = devs_pickit2_spi, .init = pickit2_spi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, diff --git a/pickit2_spi.c b/pickit2_spi.c index e5f7bed..f1f60a2 100644 --- a/pickit2_spi.c +++ b/pickit2_spi.c @@ -55,6 +55,12 @@ #include "programmer.h" #include "spi.h" +const struct dev_entry devs_pickit2_spi[] = { + {0x04D8, 0x0033, OK, "Microchip", "PICkit 2"}, + + {} +}; + static usb_dev_handle *pickit2_handle; /* Default USB transaction timeout in ms */ @@ -64,9 +70,6 @@ static usb_dev_handle *pickit2_handle; #define ENDPOINT_OUT 0x01 #define ENDPOINT_IN 0x81 -#define PICKIT2_VID 0x04D8 -#define PICKIT2_PID 0x0033 - #define CMD_GET_VERSION 0x76 #define CMD_SET_VDD 0xA0 #define CMD_SET_VPP 0xA1 @@ -448,7 +451,9 @@ int pickit2_spi_init(void) usb_init(); (void)usb_find_busses(); (void)usb_find_devices(); - struct usb_device *dev = get_device_by_vid_pid(PICKIT2_VID, PICKIT2_PID, usedevice); + const uint16_t vid = devs_pickit2_spi[0].vendor_id; + const uint16_t pid = devs_pickit2_spi[0].device_id; + struct usb_device *dev = get_device_by_vid_pid(vid, pid, usedevice); if (dev == NULL) { msg_perr("Could not find a PICkit2 on USB!\n"); return 1; diff --git a/programmer.h b/programmer.h index 301f3ff..9a880d7 100644 --- a/programmer.h +++ b/programmer.h @@ -499,6 +499,7 @@ int mstarddc_spi_init(void); /* pickit2_spi.c */ #if CONFIG_PICKIT2_SPI == 1 int pickit2_spi_init(void); +extern const struct dev_entry devs_pickit2_spi[]; #endif /* rayer_spi.c */ -- Kind regards, Stefan Tauner

1 0

[PATCH] dediprog: use ordinary USB devs array.
by Stefan Tauner 21 Feb '16

21 Feb '16

Even though there is currently only one USB device ID in the wild using our standard way to define the devices creates nicer output for -L and -z. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> --- dediprog.c | 10 +++++++++- flashrom.c | 5 ++--- programmer.h | 1 + 3 files changed, 12 insertions(+), 4 deletions(-) diff --git a/dediprog.c b/dediprog.c index 6a9b9ae..019de46 100644 --- a/dediprog.c +++ b/dediprog.c @@ -143,6 +143,11 @@ enum dediprog_standalone_mode { LEAVE_STANDALONE_MODE = 1, }; +const struct dev_entry devs_dediprog[] = { + {0x0483, 0xDADA, OK, "Dediprog", "SF100/SF600"}, + + {0}, +}; static int dediprog_firmwareversion = FIRMWARE_VERSION(0, 0, 0); enum dediprog_devtype dediprog_devicetype = DEV_UNKNOWN; @@ -1019,7 +1024,10 @@ int dediprog_init(void) msg_perr("Could not initialize libusb!\n"); return 1; } - dediprog_handle = get_device_by_vid_pid_number(0x0483, 0xdada, (unsigned int) usedevice); + + const uint16_t vid = devs_dediprog[0].vendor_id; + const uint16_t pid = devs_dediprog[0].device_id; + dediprog_handle = get_device_by_vid_pid_number(vid, pid, (unsigned int) usedevice); if (!dediprog_handle) { msg_perr("Could not find a Dediprog programmer on USB.\n"); libusb_exit(usb_ctx); diff --git a/flashrom.c b/flashrom.c index 7bdfb73..6ca633e 100644 --- a/flashrom.c +++ b/flashrom.c @@ -247,9 +247,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_DEDIPROG == 1 { .name = "dediprog", - .type = OTHER, - /* FIXME */ - .devs.note = "Dediprog SF100\n", + .type = USB, + .devs.dev = devs_dediprog, .init = dediprog_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, diff --git a/programmer.h b/programmer.h index 301f3ff..61702a4 100644 --- a/programmer.h +++ b/programmer.h @@ -527,6 +527,7 @@ int linux_spi_init(void); /* dediprog.c */ #if CONFIG_DEDIPROG == 1 int dediprog_init(void); +extern const struct dev_entry devs_dediprog[]; #endif /* ch341a_spi.c */ -- Kind regards, Stefan Tauner

1 0

[commit] r1940 - tags/0.9.9-rc1
by repository service 21 Feb '16

21 Feb '16

Author: stefanct Date: Sun Feb 21 19:25:15 2016 New Revision: 1940 URL: http://flashrom.org/trac/flashrom/changeset/1940 Log: Tag flashrom 0.9.9-rc1. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Urja Rannikko <urjaman(a)gmail.com> Added: tags/0.9.9-rc1/ - copied from r1939, trunk/

1 0

[commit] r1939 - trunk
by repository service 21 Feb '16

21 Feb '16

Author: stefanct Date: Sun Feb 21 19:17:14 2016 New Revision: 1939 URL: http://flashrom.org/trac/flashrom/changeset/1939 Log: Increase version number to 0.9.9-rc1. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Urja Rannikko <urjaman(a)gmail.com> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Sun Feb 21 12:18:24 2016 (r1938) +++ trunk/Makefile Sun Feb 21 19:17:14 2016 (r1939) @@ -437,7 +437,7 @@ # will not require subversion. The downloadable snapshots are already exported. SVNVERSION := $(shell ./util/getrevision.sh -u 2>/dev/null ) -RELEASE := 0.9.8 +RELEASE := 0.9.9-rc1 VERSION := $(RELEASE)-$(SVNVERSION) RELEASENAME ?= $(VERSION)

1 0

Re: [flashrom] [PATCH 3/3] serprog: allow to omit specifying a baud rate.
by Stefan Tauner 21 Feb '16

21 Feb '16

On Sun, 28 Jun 2015 03:56:52 +0200 Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> wrote: > On USB-based serial connections (VCP) the requested baud rate usually > does not matter (much). Remove the arbitrary restriction and use whatever > default values the OS/hardware provides. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman(a)gmail.com> and committed already in r1907 some time ago. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH 2/3] serprog: ignore failures when setting serial port options.
by Stefan Tauner 21 Feb '16

21 Feb '16

On Sun, 28 Jun 2015 03:56:51 +0200 Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> wrote: > There is no good reason to abort earlier just because some options did > not stick. This should improve compatibility without negative effects. If > communication is affected by the missing flag(s) then we abort later > anyway. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman(a)gmail.com> and committed already in r1906 some time ago. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH 1/3] serprog: clear NDELAY flag only once after opening the port.
by Stefan Tauner 21 Feb '16

21 Feb '16

On Sun, 28 Jun 2015 03:56:50 +0200 Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> wrote: > Change sp_openserport() to directly clear the O_NONBLOCK flag that > is potentially set by opening the device with O_NDELAY instead of > clearing ALL flags in serialport_config() unconditionally. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman(a)gmail.com> and committed already in r1905 some time ago. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom February 2016