flashrom August 2010

flashrom@flashrom.org

77 participants
209 discussions

[PATCH] W83697 superio safety checks
by David Borg 03 Aug '10

03 Aug '10

Patch to add safety checks for W83697 SuperIO enables. This impacts already known working boards, should I reset the Test ok fields? The following boards are affected, however they all have a W83697HF/F/HG SuperIO, which I tested as OK on Asus P4S800-MX "MSI" "MS-6590 (KT4 Ultra)" "MSI" "MS-6712 (KT4V)" "ASUS" "A7V8X-MX SE" "ASUS" "P4S800-MX" "Tyan" "S2498 (Tomcat K7M)" "EPoX" "EP-8K5A2" "Termtek" "TK-3370 (Rev:2.5B)" "MSI" "MS-7005 (651M-L)" "Shuttle" "AK31" http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http%3A%2F%2Fww… "Albatron" "PM266A Pro" (according to manual) Signed-off-by: David Borg <borg.db(a)gmail.com> Regards, David

1 0

Re: [flashrom] Unable to use flasrom0.9.1 in my board
by sougata.barik＠wipro.com 02 Aug '10

02 Aug '10

Hi, I am using flashrom 0.9.1 in intel EP80579 processor which is connected to flash SST25VF016B by spi interface but when I am trying to use it, it shows following error [root@localhost flashrom-0.9.1]# ./flashrom -V flashrom v0.9.1-r710 No coreboot table found. Found chipset "Intel EP80579", enabling flash write... 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0xd70260: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x0 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x00: 0x8004 (SPIS) 0x02: 0x4240 (SPIC) 0x04: 0x00f4d606 (SPIA) 0x08: 0x41bf41bf (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0x00000000 (SPID2) 0x1c: 0x00000000 (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0x00000000 (SPID4) 0x2c: 0x00000000 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x00000000 (SPID6) 0x3c: 0x00000000 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0x00000000 (SPID7+4) 0x50: 0x00e00000 (BBAR) 0x54: 0x5006 (PREOP) 0x56: 0x163b (OPTYPE) 0x58: 0x05200302 (OPMENU) 0x5c: 0x00016090 (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) 0x6c: 0x00000000 (PBR3) WARNING: SPI Configuration Lockdown activated. Generating OPCODES... done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: SPI. Calibrating delay loop... 341M loops per second, 100 myus = 199 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25DF041A, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25DF081, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25DF161, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25DF321, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25DF321A, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25DF641, 8192 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25F512B, 64 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25FS010, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25FS040, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT26DF041, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for Atmel AT26DF161, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT26DF161A, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT26F004, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT29C512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB011D, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB021D, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB041D, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB081D, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for Atmel AT45DB321C, 4224 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB321D, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB642D, 8192 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40P, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for AMIC A29002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25B10, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25B20, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25B40, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25B80, 1024 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for Eon EN25B16, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25B32, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25B64, 8192 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25D16, 2048 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for Eon EN25F05, 64 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25F10, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25F20, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25F40, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25F80, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25F16, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25F32, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Intel 82802AC, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Macronix MX25L512, 64 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L1005, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L2005, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L4005, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L8005, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L1605, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L1635D, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L3205, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L3235D, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L6405, 8192 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L12805, 16384 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for Numonyx M25PE20, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Numonyx M25PE40, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Numonyx M25PE80, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for Numonyx M25PE16, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for PMC Pm25LV010, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for PMC Pm25LV016B, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for PMC Pm25LV020, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for PMC Pm25LV040, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for PMC Pm25LV512, 64 KB: Transaction error! run OPCODE 0x90 failed Probing for PMC Pm29F0002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F0002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for PMC Pm49FL004, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for Sharp LHF00L04, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Spansion S25FL016A, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF016B, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF032B, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF040B, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF040.REMS, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF040B.REMS, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF080B, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST28SF040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF003A/B, 384 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF004A/B, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF004C, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF008A, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF008C, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF016C, 2048 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF020, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P05.RES, 64 KB: Transaction error! run OPCODE 0x90 failed Invalid OPCODE 0xab Probing for ST M25P10-A, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P10.RES, 128 KB: Transaction error! run OPCODE 0x90 failed Invalid OPCODE 0xab Probing for ST M25P20, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P40, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P40-old, 512 KB: Transaction error! run OPCODE 0x90 failed Invalid OPCODE 0xab Probing for ST M25P80, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P16, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P32, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P64, 8192 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for ST M25P128, 16384 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080B, 1024 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FW002, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW016, 2048 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW040, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW080, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50LPW116, 2048 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for Winbond W25x20, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Winbond W25x40, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Winbond W25x80, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for Winbond W25x16, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Winbond W29C011, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080FA, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. Transaction error! run OPCODE 0x90 failed Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. Transaction error! run OPCODE 0x90 failed Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. Transaction error! run OPCODE 0x90 failed Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. Transaction error! run OPCODE 0x90 failed Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. Transaction error! run OPCODE 0x90 failed Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Not unmapping zero size at (nil) No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename Note: flashrom can never write when the flash chip isn't found automatically. [root@localhost flashrom-0.9.1]# CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.3 | VT102 | Offline [root@localhost flashrom-0.9.1]# ./flashrom -c SST25VF016B flashrom v0.9.1-r710 No coreboot table found. Found chipset "Intel EP80579", enabling flash write... WARNING: SPI Configuration Lockdown activated. OK. This chipset supports the following protocols: SPI. Calibrating delay loop... OK. No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename Note: flashrom can never write when the flash chip isn't found automatically. [root@localhost flashrom-0.9.1]# please tell me what should I do to work this utility in my board and how I can download flashrom from svn?? regards, Sougata Please do not print this email unless it is absolutely necessary. The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

2 1

Results Asus Rampage II Extreme Motherboard
by Melroy van den Berg 02 Aug '10

02 Aug '10

Hi FlashRom, Output of the "sudo flashrom -w RampageII-ASUS-Extreme-1802.ROM": http://pastebin.com/hh7EmzRp The results of "sudo flashrom -V": http://flashrom.pastebin.com/jCgAin5D Results of "sudo superiotool -deV": http://flashrom.pastebin.com/ZZHzgjH3 And, the "lspci -nnvvvxxx" commando: http://flashrom.pastebin.com/TsB8zg07 Motherboard name: Asus Rampage II Extreme http://www.asus.com/Product.aspx?P_ID=W7i5W4Pw4fH22Mih&content=specificatio… New downloaded BIOS: Rampage II Extreme BIOS 1802 (2010/02/08 update) Downloaded from: http://support.asus.com/download/download.aspx -- Kind regards, Melroy van den Berg webmaster(a)web-share.nl

1 0

Dell Vostro V13 Laptop flashrom found something
by XVilka Haos of System 02 Aug '10

02 Aug '10

Hi! I'm tried newest flashrom on newest kernel from git Caption: Dell Vostro V13 Product Link: http://www.dell.com/us/en/business/notebooks/vostro-v13/pd.aspx?refid=vostr… Board Vendor: Dell Inc. Board name: 0R45H1 CPU: Intel® Celeron 743 (1.2GHz, 1MB L2 cache) (Ultra Low Voltage) Chipset: Mobile Intel® GS45 Express Chipset ICH9M-Enhanced Graphics: Intel Graphics Media Accelerator (GMA) 4500MHD Northbridge: GS45-GMHC Southbridge: ICH9M-E Motion Sensor: STM DE351DL DRAM bus width: 64-bit buses Processor address bus width: 36 bits Flash EPROM: SPI 16 Mbits PCI bus: 32 bits, 33 MHz Dissassebmle: http://blog.screenaid.com/2010/02/03/dell-vostro-v13-disassembly/ Service manual: http://support.dell.com/support/edocs/systems/vosV13/en/sm/specs.htm Super I/O chip: ITE IT8502E Embedded controller chip: ITE IT8502E Flash chip: Winbond 25Q16BVSIG Flashrom found something when tried to check flash chip id1=4e id2=44 -- Best regards, XVilka.

2 1

[commit] r1130 - trunk
by repository service 02 Aug '10

02 Aug '10

Author: mkarcher Date: Mon Aug 2 10:29:34 2010 New Revision: 1130 URL: http://flashrom.org/trac/coreboot/changeset/1130 Log: Board enable for Asus P4S800-MX lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-July/004172.html Signed-off-by: David Borg <borg.db(a)gmail.com> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/board_enable.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Sun Aug 1 02:13:49 2010 (r1129) +++ trunk/board_enable.c Mon Aug 2 10:29:34 2010 (r1130) @@ -352,7 +352,9 @@ } /** - * w83627: Enable MEMW# and set ROM size to max. + * Enable MEMW# and set ROM size to max. + * Supported chips: + * W83L517D, W83697HF/F/HG, W83697SF/UF/UG */ static void w836xx_memw_enable(uint16_t port) { @@ -1715,6 +1717,7 @@ {0x8086, 0x24D3, 0x1043, 0x80A6, 0x8086, 0x2578, 0x1043, 0x80F6, NULL, NULL, NULL, "ASUS", "P4C800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, NULL, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80A5, 0x105A, 0x24D3, 0x1043, 0x80A6, NULL, NULL, NULL, "ASUS", "P4SD-LA", 0, NT, intel_ich_gpio32_raise}, + {0x1039, 0x0661, 0x1043, 0x8113, 0x1039, 0x5513, 0x1043, 0x8087, NULL, NULL, NULL, "ASUS", "P4S800-MX", 512, OK, w836xx_memw_enable_2e}, {0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "^P5A$", "asus", "p5a", "ASUS", "P5A", 0, OK, board_asus_p5a}, {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise}, {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise},

1 0

PMC Pm49FL004 on ICH8 read verify with v0.9.1-r946
by Tim Small 02 Aug '10

02 Aug '10

flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "System Manufacter" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "http://www.abit.com.tw/" DMI string baseboard-product-name: "IB9 (Intel P965-ICH8)" DMI string baseboard-version: "1.0 " DMI string chassis-type: "Desktop" Found chipset "Intel ICH8/ICH8R", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x80c64: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x04: 0x0000 (HSFS) FLOCKDN 0, FDV 0, FDOPSS 0, SCIP 0, BERASE 0, AEL 0, FCERR 0, FDONE 0 0x50: 0x0000ffff (FRAP) BMWAG 0, BMRAG 0, BRWA 255, BRRA 255 0x54: 0x00001fff (FREG0) 0x58: 0x00001fff (FREG1) 0x5C: 0x00001fff (FREG2) 0x60: 0x00001fff (FREG3) 0x64: 0x00000000 (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x00414004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00000000 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... 683M loops per second, 100 myus = 199 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25F512B, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25FS010, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25FS040, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26DF041, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26F004, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT29C512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L40PU, 512 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A29002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B05T, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B10, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B10T, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B20T, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B40T, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B80T, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B16T, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B32T, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B64, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B64T, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25D16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F05, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F10, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN29F010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for Macronix MX25L512, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L1005, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L2005, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L4005, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Numonyx M25PE20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Numonyx M25PE40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV010, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV020, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV040, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV512, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25VF016B, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25VF032B, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25VF040.REMS, 512 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF040B, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25VF040B.REMS, 512 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF080B, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST28SF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P05.RES, 64 KB: RDID returned 0xff 0xff 0xff. REMS returned ff ff. Invalid OPCODE 0xab Probing for ST M25P10-A, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P10.RES, 128 KB: RDID returned 0xff 0xff 0xff. REMS returned ff ff. Invalid OPCODE 0xab Probing for ST M25P20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P40-old, 512 KB: RDID returned 0xff 0xff 0xff. REMS returned ff ff. Invalid OPCODE 0xab Probing for ST M25P80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P64, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P128, 16384 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xf6, id2 0x48 Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for ST M50LPW116, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x64, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W29C011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Not unmapping zero size at (nil) Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff Not unmapping zero size at (nil) === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done.

2 2

as long as we're adding a bunch of supported boards...
by Daniel Lenski 01 Aug '10

01 Aug '10

Here are a couple more supported boards which I own. Dan

3 5

[PATCH] add support for SIS963
by David Borg 01 Aug '10

01 Aug '10

Works with parallel flash, where there is a W83697HF SuperIO (P4S800-MX motherboard) Not tested in cases where there is LPC flash in the system (if there exists such a setup, though it is supported by the chipset). Regards, David Borg

2 2

flashrom -V
by Stanislav Bolshakov 01 Aug '10

01 Aug '10

2 1

flashrom support for Epox EP-8K5A2
by David Borg 01 Aug '10

01 Aug '10

Hi Kevin, According to this email http://www.coreboot.org/pipermail/coreboot/2009-May/047810.html you were the original tester for the Epox 8k5a2 motherboard. I cannot find the output of superiotool for this motherboard, needed for some documentation clarifications. Replying to the mailing list with the output of the following commands (run as root) would be greatly appreciated: superiotool -deV lspci -nnvvvxxx In case superiotool is not installed, you can follow installation instructions here: http://www.coreboot.org/Superiotool (under the Installation section). Thanks and regards, David Borg

2 2

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom August 2010