flashrom May 2010

flashrom@flashrom.org

64 participants
169 discussions

Flashrom with Sil 3132
by Bernhardt, Pepper 22 May '10

22 May '10

I tried using your product to update the BIOS on a Silicon Image SATA controller but it gave me an error. Any help would be appreciated. Thanks, Pepper Here is the output: [root@oort Desktop]# flashrom -p satasii flashrom v0.9.1-r710 Found "Silicon Image SiI 3132 SATA Raid II Ctrl" (1095:3132, BDF 02:00.0). Found "Silicon Image SiI 3132 SATA Raid II Ctrl" (1095:3132, BDF 03:00.0). Found "Silicon Image SiI 3132 SATA Raid II Ctrl" (1095:3132, BDF 04:00.0). Found "Silicon Image SiI 3124 PCI-X SATA Ctrl" (1095:3124, BDF 06:02.0). === This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output to flashrom(a)flashrom.org if it works for you. Thank you for your help! === Error: Multiple supported PCI devices found. Use 'flashrom -p xxxx=bb:dd.f' to explicitly select the card with the given BDF (PCI bus, device, function). [root@oort Desktop]# flashrom -wV -p satasii:02:00.0 SiI3132_r7702.bin flashrom v0.9.1-r710 Found "Silicon Image SiI 3132 SATA Raid II Ctrl" (1095:3132, BDF 02:00.0). Mapping SATA SIL registers at 0xe0984000, unaligned size 0x100. Calibrating delay loop... 945M loops per second, 100 myus = 199 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x55, id2 0xaa Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0x55, id2 0xaa Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x55, id2 0xaa Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x55, id2 0xaa Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0x55, id2 0xaa Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xbf, id2 0xd7 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xbf, id2 0xd7 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x55, id2 0xaa Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for Eon EN25B05, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x55, id2 0x64 Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x55, id2 0x64 Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for Intel 82802AB, 512 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Intel 82802AC, 1024 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0xbf, id2 0xd7 Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0xbf, id2 0xd7 Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xbf, id2 0xd7 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xbf, id2 0xd7 Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xbf, id2 0xd7 Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0x55, id2 0xaa Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0x55, id2 0xaa Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for PMC Pm49FL002, 256 KB: skipped. Host bus type Parallel and chip bus type LPC,FWH are incompatible. Probing for PMC Pm49FL004, 512 KB: skipped. Host bus type Parallel and chip bus type LPC,FWH are incompatible. Probing for Sharp LHF00L04, 1024 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x55, id2 0xaa Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xbf, id2 0xd7 Found chip "SST SST39VF040" (512 KB, Parallel) at physical address 0xfff80000. Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for SST SST49LF002A/B, 256 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF003A/B, 384 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF004A/B, 512 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF004C, 512 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF008A, 1024 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF008C, 1024 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF016C, 2048 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF020, 256 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x55, id2 0xaa Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x55, id2 0x64 Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for ST M50FLW040A, 512 KB: skipped. Host bus type Parallel and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW040B, 512 KB: skipped. Host bus type Parallel and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080A, 1024 KB: skipped. Host bus type Parallel and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080B, 1024 KB: skipped. Host bus type Parallel and chip bus type LPC,FWH are incompatible. Probing for ST M50FW002, 256 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for ST M50FW016, 2048 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for ST M50FW040, 512 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for ST M50FW080, 1024 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for ST M50LPW116, 2048 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for Winbond W25x10, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xbf, id2 0xd7 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0xd7 Probing for Winbond W49V002A, 256 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Winbond W39V080FA, 1024 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === Error: Image size doesn't match

3 3

[PATCH] Various programmer fixes
by Carl-Daniel Hailfinger 22 May '10

22 May '10

Initialize the internal delay function before running programmer init. The programmer init may need a good host delay function. Fix Tyan S2915 by commenting out MCP55 LPC PCI ID 10de:0361 and add debug output to avoid similar nightmares in the future. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-0.9.2-programmer_fixes/chipset_enable.c =================================================================== --- flashrom-0.9.2-programmer_fixes/chipset_enable.c (Revision 998) +++ flashrom-0.9.2-programmer_fixes/chipset_enable.c (Arbeitskopie) @@ -1354,7 +1354,15 @@ {0x10de, 0x0262, NT, "NVIDIA", "MCP51", enable_flash_ck804}, {0x10de, 0x0263, NT, "NVIDIA", "MCP51", enable_flash_ck804}, {0x10de, 0x0360, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* M57SLI*/ - {0x10de, 0x0361, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */ + /* 10de:0361 is present in Tyan S2915 systems, but not connected to + * the flash chip. Instead, 10de:0364 is connected to the flash chip. + * Until we have PCI device class matching or some fallback mechanism, + * this is needed to get flashrom working on Tyan S2915 and maybe other + * dual-MCP55 boards. + */ +#if 0 + {0x10de, 0x0361, NT, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */ +#endif {0x10de, 0x0362, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */ {0x10de, 0x0363, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */ {0x10de, 0x0364, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */ @@ -1439,6 +1447,9 @@ msg_pinfo("Found chipset \"%s %s\", enabling flash write... ", chipset_enables[i].vendor_name, chipset_enables[i].device_name); + msg_pdbg("chipset PCI ID is %04x:%04x, ", + chipset_enables[i].vendor_id, + chipset_enables[i].device_id); ret = chipset_enables[i].doit(dev, chipset_enables[i].device_name); Index: flashrom-0.9.2-programmer_fixes/cli_classic.c =================================================================== --- flashrom-0.9.2-programmer_fixes/cli_classic.c (Revision 998) +++ flashrom-0.9.2-programmer_fixes/cli_classic.c (Arbeitskopie) @@ -378,6 +378,9 @@ flash = NULL; } + /* FIXME: Delay calibration should happen in programmer code. */ + myusec_calibrate_delay(); + msg_pdbg("Initializing %s programmer\n", programmer_table[programmer].name); if (programmer_init()) { @@ -386,8 +389,6 @@ } /* FIXME: Delay calibration should happen in programmer code. */ - myusec_calibrate_delay(); - for (i = 0; i < ARRAY_SIZE(flashes); i++) { flashes[i] = probe_flash(i ? flashes[i - 1] + 1 : flashchips, 0); -- http://www.hailfinger.org/

2 2

[commit] r1008 - trunk
by repository service 22 May '10

22 May '10

Author: hailfinger Date: Sat May 22 09:31:50 2010 New Revision: 1008 URL: http://flashrom.org/trac/coreboot/changeset/1008 Log: Add debug output of the exact matched chipset PCI ID to keep track of tested PCI IDs for chipsets with one name and multiple IDs. This will help avoid problems similar to the Tyan S2915 OEM undetected flash in the future. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/chipset_enable.c Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Sat May 22 09:27:16 2010 (r1007) +++ trunk/chipset_enable.c Sat May 22 09:31:50 2010 (r1008) @@ -1447,6 +1447,9 @@ msg_pinfo("Found chipset \"%s %s\", enabling flash write... ", chipset_enables[i].vendor_name, chipset_enables[i].device_name); + msg_pdbg("chipset PCI ID is %04x:%04x, ", + chipset_enables[i].vendor_id, + chipset_enables[i].device_id); ret = chipset_enables[i].doit(dev, chipset_enables[i].device_name);

1 0

[commit] r1007 - trunk
by repository service 22 May '10

22 May '10

Author: hailfinger Date: Sat May 22 09:27:16 2010 New Revision: 1007 URL: http://flashrom.org/trac/coreboot/changeset/1007 Log: Fix Tyan S2915 OEM board by commenting out MCP55 LPC bridge PCI ID 10de:0361 which is the secondary LPC bridge. The same effect could be achieved by refusing to run enable_flash_mcp55 if the device class is not ISA bridge [0601]. Thanks to Alessandro Polverini, Joel Robertson, Nicolas Aveline, Phil LoCascio and Nils-Helge Garli Hegvik for testing flashrom on hardware and Michael Karcher for analyzing the factory BIOS for clues. In the end, no board enable was needed and it was a pure chipset issue. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/chipset_enable.c Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Sat May 22 09:10:46 2010 (r1006) +++ trunk/chipset_enable.c Sat May 22 09:27:16 2010 (r1007) @@ -1354,7 +1354,15 @@ {0x10de, 0x0262, NT, "NVIDIA", "MCP51", enable_flash_ck804}, {0x10de, 0x0263, NT, "NVIDIA", "MCP51", enable_flash_ck804}, {0x10de, 0x0360, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* M57SLI*/ - {0x10de, 0x0361, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */ + /* 10de:0361 is present in Tyan S2915 OEM systems, but not connected to + * the flash chip. Instead, 10de:0364 is connected to the flash chip. + * Until we have PCI device class matching or some fallback mechanism, + * this is needed to get flashrom working on Tyan S2915 and maybe other + * dual-MCP55 boards. + */ +#if 0 + {0x10de, 0x0361, NT, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */ +#endif {0x10de, 0x0362, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */ {0x10de, 0x0363, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */ {0x10de, 0x0364, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */

1 0

[commit] r1006 - trunk
by repository service 22 May '10

22 May '10

Author: hailfinger Date: Sat May 22 09:10:46 2010 New Revision: 1006 URL: http://flashrom.org/trac/coreboot/changeset/1006 Log: Initialize the internal delay function before running programmer init. The programmer init may need a good host delay function. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/cli_classic.c Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Sat May 22 01:09:42 2010 (r1005) +++ trunk/cli_classic.c Sat May 22 09:10:46 2010 (r1006) @@ -378,6 +378,9 @@ flash = NULL; } + /* FIXME: Delay calibration should happen in programmer code. */ + myusec_calibrate_delay(); + msg_pdbg("Initializing %s programmer\n", programmer_table[programmer].name); if (programmer_init()) { @@ -386,8 +389,6 @@ } /* FIXME: Delay calibration should happen in programmer code. */ - myusec_calibrate_delay(); - for (i = 0; i < ARRAY_SIZE(flashes); i++) { flashes[i] = probe_flash(i ? flashes[i - 1] + 1 : flashchips, 0);

1 0

[commit] r1005 - trunk
by repository service 22 May '10

22 May '10

Author: hailfinger Date: Sat May 22 01:09:42 2010 New Revision: 1005 URL: http://flashrom.org/trac/coreboot/changeset/1005 Log: Every SPI programmer driver had its own completely different chip write implementation, and all of them were insufficiently commented. Create spi_write_chunked as a copy of spi_read_chunked and convert all SPI programmers to use it. No functional changes except: - Bus Pirate uses 12 Byte writes instead of 8 Byte writes - SB600 uses 5 Byte writes instead of 1 Byte writes Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: David Hendricks <dhendrix(a)google.com> Modified: trunk/bitbang_spi.c trunk/buspirate_spi.c trunk/chipdrivers.h trunk/ft2232_spi.c trunk/ichspi.c trunk/sb600spi.c trunk/spi25.c Modified: trunk/bitbang_spi.c ============================================================================== --- trunk/bitbang_spi.c Sat May 22 01:00:56 2010 (r1004) +++ trunk/bitbang_spi.c Sat May 22 01:09:42 2010 (r1005) @@ -1,7 +1,7 @@ /* * This file is part of the flashrom project. * - * Copyright (C) 2009 Carl-Daniel Hailfinger + * Copyright (C) 2009, 2010 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -142,24 +142,7 @@ int bitbang_spi_write_256(struct flashchip *flash, uint8_t *buf) { int total_size = 1024 * flash->total_size; - int i; msg_pdbg("total_size is %d\n", total_size); - for (i = 0; i < total_size; i += 256) { - int l, r; - if (i + 256 <= total_size) - l = 256; - else - l = total_size - i; - - if ((r = spi_nbyte_program(i, &buf[i], l))) { - msg_perr("%s: write fail %d\n", __func__, r); - return 1; - } - - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - /* loop */; - } - - return 0; + return spi_write_chunked(flash, buf, 0, total_size, 256); } Modified: trunk/buspirate_spi.c ============================================================================== --- trunk/buspirate_spi.c Sat May 22 01:00:56 2010 (r1004) +++ trunk/buspirate_spi.c Sat May 22 01:09:42 2010 (r1005) @@ -1,7 +1,7 @@ /* * This file is part of the flashrom project. * - * Copyright (C) 2009 Carl-Daniel Hailfinger + * Copyright (C) 2009, 2010 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -319,7 +319,6 @@ int buspirate_spi_write_256(struct flashchip *flash, uint8_t *buf) { int total_size = 1024 * flash->total_size; - int i; spi_disable_blockprotect(); /* Erase first. */ @@ -330,25 +329,5 @@ } msg_pinfo("done.\n"); - /* FIXME: We could do 12 byte writes, but then we'd have to make sure - * not to cross a 256 byte page boundary. This problem only applies to - * writes, reads can cross page boundaries just fine. - */ - for (i = 0; i < total_size; i += 8) { - int l, r; - if (i + 8 <= total_size) - l = 8; - else - l = total_size - i; - - if ((r = spi_nbyte_program(i, &buf[i], l))) { - msg_perr("%s: write fail %d\n", __func__, r); - return 1; - } - - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - /* loop */; - } - - return 0; + return spi_write_chunked(flash, buf, 0, total_size, 12); } Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Sat May 22 01:00:56 2010 (r1004) +++ trunk/chipdrivers.h Sat May 22 01:09:42 2010 (r1005) @@ -51,6 +51,7 @@ int spi_nbyte_program(int addr, uint8_t *bytes, int len); int spi_nbyte_read(int addr, uint8_t *bytes, int len); int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); +int spi_write_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); int spi_aai_write(struct flashchip *flash, uint8_t *buf); /* 82802ab.c */ Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Sat May 22 01:00:56 2010 (r1004) +++ trunk/ft2232_spi.c Sat May 22 01:09:42 2010 (r1005) @@ -2,7 +2,7 @@ * This file is part of the flashrom project. * * Copyright (C) 2009 Paul Fox <pgf(a)laptop.org> - * Copyright (C) 2009 Carl-Daniel Hailfinger + * Copyright (C) 2009, 2010 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -288,7 +288,6 @@ int ft2232_spi_write_256(struct flashchip *flash, uint8_t *buf) { int total_size = 1024 * flash->total_size; - int i; spi_disable_blockprotect(); /* Erase first. */ @@ -299,23 +298,7 @@ } msg_pinfo("done.\n"); msg_pdbg("total_size is %d\n", total_size); - for (i = 0; i < total_size; i += 256) { - int l, r; - if (i + 256 <= total_size) - l = 256; - else - l = total_size - i; - - if ((r = spi_nbyte_program(i, &buf[i], l))) { - msg_perr("%s: write fail %d\n", __func__, r); - return 1; - } - - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - /* loop */; - } - - return 0; + return spi_write_chunked(flash, buf, 0, total_size, 256); } #endif Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Sat May 22 01:00:56 2010 (r1004) +++ trunk/ichspi.c Sat May 22 01:09:42 2010 (r1005) @@ -5,7 +5,7 @@ * Copyright (C) 2008 Claus Gindhart <claus.gindhart(a)kontron.com> * Copyright (C) 2008 Dominik Geyer <dominik.geyer(a)kontron.com> * Copyright (C) 2008 coresystems GmbH <info(a)coresystems.de> - * Copyright (C) 2009 Carl-Daniel Hailfinger + * Copyright (C) 2009, 2010 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -149,8 +149,6 @@ static int program_opcodes(OPCODES * op); static int run_opcode(OPCODE op, uint32_t offset, uint8_t datalength, uint8_t * data); -static int ich_spi_write_page(struct flashchip *flash, uint8_t * bytes, - int offset, int maxdata); /* for pairing opcodes with their required preop */ struct preop_opcode_pair { @@ -636,28 +634,6 @@ return -1; } -static int ich_spi_write_page(struct flashchip *flash, uint8_t * bytes, - int offset, int maxdata) -{ - int page_size = flash->page_size; - uint32_t remaining = page_size; - int towrite; - - msg_pspew("ich_spi_write_page: offset=%d, number=%d, buf=%p\n", - offset, page_size, bytes); - - for (; remaining > 0; remaining -= towrite) { - towrite = min(remaining, maxdata); - if (spi_nbyte_program(offset + (page_size - remaining), - &bytes[page_size - remaining], towrite)) { - msg_perr("Error writing"); - return 1; - } - } - - return 0; -} - int ich_spi_read(struct flashchip *flash, uint8_t * buf, int start, int len) { int maxdata = 64; @@ -670,12 +646,14 @@ int ich_spi_write_256(struct flashchip *flash, uint8_t * buf) { - int i, j, rc = 0; + int i, ret = 0; int total_size = flash->total_size * 1024; - int page_size = flash->page_size; int erase_size = 64 * 1024; int maxdata = 64; + if (spi_controller == SPI_CONTROLLER_VIA) + maxdata = 16; + spi_disable_blockprotect(); /* Erase first */ msg_pinfo("Erasing flash before programming... "); @@ -687,19 +665,15 @@ msg_pinfo("Programming page: \n"); for (i = 0; i < total_size / erase_size; i++) { - if (spi_controller == SPI_CONTROLLER_VIA) - maxdata = 16; - - for (j = 0; j < erase_size / page_size; j++) { - ich_spi_write_page(flash, - (void *)(buf + (i * erase_size) + (j * page_size)), - (i * erase_size) + (j * page_size), maxdata); - } + ret = spi_write_chunked(flash, buf + (i * erase_size), + i * erase_size, erase_size, maxdata); + if (ret) + break; } msg_pinfo("\n"); - return rc; + return ret; } int ich_spi_send_command(unsigned int writecnt, unsigned int readcnt, Modified: trunk/sb600spi.c ============================================================================== --- trunk/sb600spi.c Sat May 22 01:00:56 2010 (r1004) +++ trunk/sb600spi.c Sat May 22 01:09:42 2010 (r1005) @@ -4,6 +4,7 @@ * Copyright (C) 2008 Wang Qingpei <Qingpei.Wang(a)amd.com> * Copyright (C) 2008 Joe Bao <Zheng.Bao(a)amd.com> * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2009, 2010 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -49,7 +50,6 @@ /* FIXME: SB600 can write 5 bytes per transaction. */ int sb600_spi_write_1(struct flashchip *flash, uint8_t *buf) { - int i; int total_size = flash->total_size * 1024; int result = 0; @@ -63,19 +63,7 @@ msg_pinfo("done.\n"); msg_pinfo("Programming flash"); - for (i = 0; i < total_size; i++, buf++) { - result = spi_nbyte_program(i, buf, 1); - if (result) { - msg_perr("Write error!\n"); - return result; - } - - /* wait program complete. */ - if (i % 0x8000 == 0) - msg_pspew("."); - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - ; - } + result = spi_write_chunked(flash, buf, 0, total_size, 5); msg_pinfo(" done.\n"); return result; } Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Sat May 22 01:00:56 2010 (r1004) +++ trunk/spi25.c Sat May 22 01:09:42 2010 (r1005) @@ -1,7 +1,7 @@ /* * This file is part of the flashrom project. * - * Copyright (C) 2007, 2008, 2009 Carl-Daniel Hailfinger + * Copyright (C) 2007, 2008, 2009, 2010 Carl-Daniel Hailfinger * Copyright (C) 2008 coresystems GmbH * * This program is free software; you can redistribute it and/or modify @@ -874,7 +874,7 @@ } /* - * Read a complete flash chip. + * Read a part of the flash chip. * Each page is read separately in chunks with a maximum size of chunksize. */ int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize) @@ -907,6 +907,52 @@ } if (rc) break; + } + + return rc; +} + +/* + * Write a part of the flash chip. + * Each page is written separately in chunks with a maximum size of chunksize. + */ +int spi_write_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize) +{ + int rc = 0; + int i, j, starthere, lenhere; + /* FIXME: page_size is the wrong variable. We need max_writechunk_size + * in struct flashchip to do this properly. All chips using + * spi_chip_write_256 have page_size set to max_writechunk_size, so + * we're OK for now. + */ + int page_size = flash->page_size; + int towrite; + + /* Warning: This loop has a very unusual condition and body. + * The loop needs to go through each page with at least one affected + * byte. The lowest page number is (start / page_size) since that + * division rounds down. The highest page number we want is the page + * where the last byte of the range lives. That last byte has the + * address (start + len - 1), thus the highest page number is + * (start + len - 1) / page_size. Since we want to include that last + * page as well, the loop condition uses <=. + */ + for (i = start / page_size; i <= (start + len - 1) / page_size; i++) { + /* Byte position of the first byte in the range in this page. */ + /* starthere is an offset to the base address of the chip. */ + starthere = max(start, i * page_size); + /* Length of bytes in the range in this page. */ + lenhere = min(start + len, (i + 1) * page_size) - starthere; + for (j = 0; j < lenhere; j += chunksize) { + towrite = min(chunksize, lenhere - j); + rc = spi_nbyte_program(starthere + j, buf + starthere - start + j, towrite); + if (rc) + break; + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + programmer_delay(10); + } + if (rc) + break; } return rc;

1 0

[PATCH] Support old libpci <2.2.4
by Carl-Daniel Hailfinger 22 May '10

22 May '10

libpci < 2.2.4 can not store class info in struct pci_dev. Read class info manually and store it in a separate variable. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-libpci_old_workaround/board_enable.c =================================================================== --- flashrom-libpci_old_workaround/board_enable.c (Revision 997) +++ flashrom-libpci_old_workaround/board_enable.c (Arbeitskopie) @@ -789,9 +789,11 @@ /* First, look for a known LPC bridge */ for (dev = pacc->devices; dev; dev = dev->next) { - pci_fill_info(dev, PCI_FILL_CLASS); + uint16_t device_class; + /* libpci before version 2.2.4 does not store class info. */ + device_class = pci_read_word(dev, PCI_CLASS_DEVICE); if ((dev->vendor_id == 0x8086) && - (dev->device_class == 0x0601)) { /* ISA Bridge */ + (device_class == 0x0601)) { /* ISA Bridge */ /* Is this device in our list? */ for (i = 0; intel_ich_gpio_table[i].id; i++) if (dev->device_id == intel_ich_gpio_table[i].id) -- http://www.hailfinger.org/

4 5

Patch to fix wrmsr for some toolchains
by Mart Raudsepp 22 May '10

22 May '10

Hello, My co-worker sent me a patch many months ago to forward upstream as appropriate, but apparently I had forgotten to do so and now hit the bug with my compiler version as well while testing something from SVN. So attached is that patch now, so that flash chip detection would work again on my Geode/CS5536 system. PS: I'm not subscribed to flashrom list right now, so please CC me on any replies Regards, Mart Raudsepp

4 5

[commit] r1004 - trunk
by repository service 22 May '10

22 May '10

Author: hailfinger Date: Sat May 22 01:00:56 2010 New Revision: 1004 URL: http://flashrom.org/trac/coreboot/changeset/1004 Log: libpci < 2.2.4 can not store class info in struct pci_dev. Read class info manually and store it in a separate variable. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/board_enable.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Sat May 22 00:28:19 2010 (r1003) +++ trunk/board_enable.c Sat May 22 01:00:56 2010 (r1004) @@ -789,9 +789,11 @@ /* First, look for a known LPC bridge */ for (dev = pacc->devices; dev; dev = dev->next) { - pci_fill_info(dev, PCI_FILL_CLASS); + uint16_t device_class; + /* libpci before version 2.2.4 does not store class info. */ + device_class = pci_read_word(dev, PCI_CLASS_DEVICE); if ((dev->vendor_id == 0x8086) && - (dev->device_class == 0x0601)) { /* ISA Bridge */ + (device_class == 0x0601)) { /* ISA Bridge */ /* Is this device in our list? */ for (i = 0; intel_ich_gpio_table[i].id; i++) if (dev->device_id == intel_ich_gpio_table[i].id)

1 0

[PATCH] support for NIC RTL8139 onboard flashing
by Jörg Fischer 22 May '10

22 May '10

Hi, here is the patch for RTL1839 based NICs. Still got some problems: * Those Nics can have a wide varity of PCI (Vendor) IDs. * Code is instable, "erase" fails but "read" reads only FFs. It is disabled by default in the Makefile. Regards, Jörg Fischer Signed-off-by: Joerg Fischer <turboj(a)gmx.de> Index: flash.h =================================================================== --- flash.h (Revision 999) +++ flash.h (Arbeitskopie) @@ -46,6 +46,10 @@ #if NIC3COM_SUPPORT == 1 PROGRAMMER_NIC3COM, #endif +#if NICREALTEK_SUPPORT == 1 + PROGRAMMER_NICREALTEK, + PROGRAMMER_NICREALTEK2, +#endif #if GFXNVIDIA_SUPPORT == 1 PROGRAMMER_GFXNVIDIA, #endif @@ -330,7 +334,7 @@ /* print.c */ char *flashbuses_to_text(enum chipbustype bustype); void print_supported(void); -#if (NIC3COM_SUPPORT == 1) || (GFXNVIDIA_SUPPORT == 1) || (DRKAISER_SUPPORT == 1) || (SATASII_SUPPORT == 1) || (ATAHPT_SUPPORT == 1) +#if (NIC3COM_SUPPORT == 1) || (GFXNVIDIA_SUPPORT == 1) || (DRKAISER_SUPPORT == 1) || (SATASII_SUPPORT == 1) || (ATAHPT_SUPPORT == 1) || (NICREALTEK_SUPPORT == 1) void print_supported_pcidevs(struct pcidev_status *devs); #endif void print_supported_wiki(void); @@ -462,6 +466,18 @@ extern struct pcidev_status drkaiser_pcidev[]; #endif +/* nicrealtek.c */ +#if NICREALTEK_SUPPORT == 1 +int nicrealtek_init(void); +int nicsmc1211_init(void); +int nicrealtek_shutdown(void); +void nicrealtek_chip_writeb(uint8_t val, chipaddr addr); +uint8_t nicrealtek_chip_readb(const chipaddr addr); +extern struct pcidev_status nics_realtek[]; +extern struct pcidev_status nics_realteksmc1211[]; +#endif + + /* satasii.c */ #if SATASII_SUPPORT == 1 int satasii_init(void); Index: flashrom.c =================================================================== --- flashrom.c (Revision 999) +++ flashrom.c (Arbeitskopie) @@ -47,13 +47,17 @@ * if more than one of them is selected. If only one is selected, it is clear * that the user wants that one to become the default. */ -#if NIC3COM_SUPPORT+GFXNVIDIA_SUPPORT+DRKAISER_SUPPORT+SATASII_SUPPORT+ATAHPT_SUPPORT+FT2232_SPI_SUPPORT+SERPROG_SUPPORT+BUSPIRATE_SPI_SUPPORT+DEDIPROG_SUPPORT > 1 +#if NIC3COM_SUPPORT+GFXNVIDIA_SUPPORT+DRKAISER_SUPPORT+SATASII_SUPPORT+ATAHPT_SUPPORT+FT2232_SPI_SUPPORT+SERPROG_SUPPORT+BUSPIRATE_SPI_SUPPORT+DEDIPROG_SUPPORT+NICREALTEK_SUPPORT > 1 #error Please enable either CONFIG_DUMMY or CONFIG_INTERNAL or disable support for all external programmers except one. #endif enum programmer programmer = #if NIC3COM_SUPPORT == 1 PROGRAMMER_NIC3COM #endif +#if NICREALTEK_SUPPORT == 1 + PROGRAMMER_NICREALTEK + PROGRAMMER_NICREALTEK2 +#endif #if GFXNVIDIA_SUPPORT == 1 PROGRAMMER_GFXNVIDIA #endif @@ -159,6 +163,42 @@ }, #endif +#if NICREALTEK_SUPPORT == 1 + { + .name = "nicrealtek", + .init = nicrealtek_init, + .shutdown = nicrealtek_shutdown, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .chip_readb = nicrealtek_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = nicrealtek_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, + .delay = internal_delay, + }, + { + .name = "nicsmc1211", + .init = nicsmc1211_init, + .shutdown = nicrealtek_shutdown, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .chip_readb = nicrealtek_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = nicrealtek_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, + .delay = internal_delay, + }, +#endif + + #if GFXNVIDIA_SUPPORT == 1 { .name = "gfxnvidia", Index: Makefile =================================================================== --- Makefile (Revision 999) +++ Makefile (Arbeitskopie) @@ -110,6 +110,9 @@ # Always enable Dr. Kaiser for now. CONFIG_DRKAISER ?= yes +# Disable Realtek NICs for now, not working correctly. +CONFIG_NICREALTEK ?= no + # Always enable Bus Pirate SPI for now. CONFIG_BUSPIRATESPI ?= yes @@ -181,6 +184,14 @@ NEED_PCI := yes endif + +ifeq ($(CONFIG_NICREALTEK), yes) +FEATURE_CFLAGS += -D'NICREALTEK_SUPPORT=1' +PROGRAMMER_OBJS += nicrealtek.o +NEED_PCI := yes +endif + + ifeq ($(CONFIG_BUSPIRATESPI), yes) FEATURE_CFLAGS += -D'BUSPIRATE_SPI_SUPPORT=1' PROGRAMMER_OBJS += buspirate_spi.o Index: nicrealtek.c =================================================================== --- nicrealtek.c (Revision 0) +++ nicrealtek.c (Revision 0) @@ -0,0 +1,84 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2009 TURBO J <turboj(a)gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdlib.h> +#include <string.h> +#include <sys/types.h> +#include "flash.h" + +#define PCI_VENDOR_ID_REALTEK 0x10ec +#define PCI_VENDOR_ID_SMC1211 0x1113 + +#define BIOS_ROM_ADDR 0xD4 +#define BIOS_ROM_DATA 0xD7 + +struct pcidev_status nics_realtek[] = { + {0x10ec, 0x8139, OK, "Realtek","rtl8139b/c PCI 10/100 Mbps"}, + {}, +}; + +struct pcidev_status nics_realteksmc1211[] = { + {0x1113, 0x1211, OK, "SMC", "SMC 1211TX rtl8139 clone 10/100 Mbps"}, + {} +}; + + +int nicrealtek_init(void) +{ + get_io_perms(); + io_base_addr = pcidev_init(PCI_VENDOR_ID_REALTEK, PCI_BASE_ADDRESS_0, + nics_realtek, programmer_param); + + buses_supported = CHIP_BUSTYPE_PARALLEL; + + return 0; +} + + +int nicsmc1211_init(void) +{ + get_io_perms(); + io_base_addr = pcidev_init(PCI_VENDOR_ID_SMC1211, PCI_BASE_ADDRESS_0, + nics_realteksmc1211, programmer_param); + + buses_supported = CHIP_BUSTYPE_PARALLEL; + + return 0; +} + +int nicrealtek_shutdown(void) +{ + free(programmer_param); + pci_cleanup(pacc); + release_io_perms(); + return 0; +} + +void nicrealtek_chip_writeb(uint8_t val, chipaddr addr) +{ + OUTL(((uint32_t)addr &0x01FFFF)|0x0A0000| (val << 24), io_base_addr + BIOS_ROM_ADDR); + OUTL(((uint32_t)addr &0x01FFFF)|0x1E0000| (val << 24), io_base_addr + BIOS_ROM_ADDR); +} + +uint8_t nicrealtek_chip_readb(const chipaddr addr) +{ + OUTL(((uint32_t)addr & 0x01FFFF) | 0x060000, io_base_addr + BIOS_ROM_ADDR); + return INB(io_base_addr + BIOS_ROM_DATA); +}

3 5

← Newer
1
...
10
11
12
13
14
15
16
17
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom May 2010