flashrom May 2010

flashrom@flashrom.org

64 participants
169 discussions

[PATCH] VIA: disable byte merging
by Michael Karcher 12 May '10

12 May '10

All mentioned north bridges have been checked against data sheet. That's all north bridges google found a datasheet for with "byte enable" included. Second revision. Should now run multiple chipset enables if the first one requests further enables to be run. VIA byte-merging logic tested: works. multiple chipset logic: completely untested Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- chipset_enable.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++------ 1 files changed, 52 insertions(+), 7 deletions(-) diff --git a/chipset_enable.c b/chipset_enable.c index fc60484..547c35e 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -34,6 +34,8 @@ #include <fcntl.h> #include "flash.h" +#define NOT_DONE_YET 1 + extern int ichspi_lock; static int enable_flash_ali_m1533(struct pci_dev *dev, const char *name) @@ -639,6 +641,32 @@ static int enable_flash_ich10(struct pci_dev *dev, const char *name) return enable_flash_ich_dc_spi(dev, name, 10); } +static void via_do_byte_merge(void * arg) +{ + struct pci_dev * dev = arg; + uint8_t val; + + printf_debug("Re-enabling byte merging\n"); + val = pci_read_byte(dev, 0x71); + val |= 0x40; + pci_write_byte(dev, 0x71, val); +} + +static int via_no_byte_merge(struct pci_dev *dev, const char *name) +{ + uint8_t val; + + val = pci_read_byte(dev, 0x71); + if (val & 0x40) + { + printf_debug("Disabling byte merging\n"); + val &= ~0x40; + pci_write_byte(dev, 0x71, val); + register_shutdown(via_do_byte_merge, dev); + } + return NOT_DONE_YET; /* need to find south bridge, too */ +} + static int enable_flash_vt823x(struct pci_dev *dev, const char *name) { uint8_t val; @@ -1405,6 +1433,14 @@ const struct penable chipset_enables[] = { {0x1039, 0x0746, NT, "SiS", "746", enable_flash_sis540}, {0x1039, 0x0748, NT, "SiS", "748", enable_flash_sis540}, {0x1039, 0x0755, NT, "SiS", "755", enable_flash_sis540}, + /* VIA northbridges */ + {0x1106, 0x0585, NT, "VIA", "VT82C585VPX", via_no_byte_merge}, + {0x1106, 0x0595, NT, "VIA", "VT82C595", via_no_byte_merge}, + {0x1106, 0x0597, NT, "VIA", "VT82C597", via_no_byte_merge}, + {0x1106, 0x0691, NT, "VIA", "VT82C69x", via_no_byte_merge}, /* 691, 693a, 694t, 694x checked */ + {0x1106, 0x0601, NT, "VIA", "VT8601/VT8601A", via_no_byte_merge}, + {0x1106, 0x8601, NT, "VIA", "VT8601T", via_no_byte_merge}, + /* VIA southbridges */ {0x1106, 0x8324, OK, "VIA", "CX700", enable_flash_vt823x}, {0x1106, 0x8231, NT, "VIA", "VT8231", enable_flash_vt823x}, {0x1106, 0x3074, NT, "VIA", "VT8233", enable_flash_vt823x}, @@ -1431,22 +1467,31 @@ int chipset_flash_enable(void) for (i = 0; chipset_enables[i].vendor_name != NULL; i++) { dev = pci_dev_find(chipset_enables[i].vendor_id, chipset_enables[i].device_id); - if (dev) - break; - } - - if (dev) { + if (!dev) + continue; + if (ret != -2) { + printf("WARNING: unexpected second chipset match: " + "\"%s %s\"\nignoring, please report lspci and " + "board URL to flashrom(a)flashrom.org!\n", + chipset_enables[i].vendor_name, + chipset_enables[i].device_name); + continue; + } printf("Found chipset \"%s %s\", enabling flash write... ", chipset_enables[i].vendor_name, chipset_enables[i].device_name); ret = chipset_enables[i].doit(dev, chipset_enables[i].device_name); - if (ret) + if (ret == NOT_DONE_YET) { + ret = -2; + printf("OK - searching further chips.\n"); + } else if (ret < 0) printf("FAILED!\n"); - else + else if(ret == 0) printf("OK.\n"); } + printf("This chipset supports the following protocols: %s.\n", flashbuses_to_text(buses_supported)); -- 1.7.1

1 0

[PATCH] VIA: disable byte merging
by Michael Karcher 12 May '10

12 May '10

All mentioned north bridges have been checked against data sheet. That's all north bridges google found a datasheet for with "byte enable" included. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- chipset_enable.c | 34 ++++++++++++++++++++++++++++++++++ 1 files changed, 34 insertions(+), 0 deletions(-) diff --git a/chipset_enable.c b/chipset_enable.c index fc60484..6ef1f8d 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -639,6 +639,32 @@ static int enable_flash_ich10(struct pci_dev *dev, const char *name) return enable_flash_ich_dc_spi(dev, name, 10); } +static void via_do_byte_merge(void * arg) +{ + struct pci_dev * dev = arg; + uint8_t val; + + printf_debug("Re-enabling byte merging\n"); + val = pci_read_byte(dev, 0x71); + val |= 0x40; + pci_write_byte(dev, 0x71, val); +} + +static int via_no_byte_merge(struct pci_dev *dev, const char *name) +{ + uint8_t val; + + val = pci_read_byte(dev, 0x71); + if (val & 0x40) + { + printf_debug("Disabling byte merging\n"); + val &= ~0x40; + pci_write_byte(dev, 0x71, val); + register_shutdown(via_do_byte_merge, dev); + } + return 0; +} + static int enable_flash_vt823x(struct pci_dev *dev, const char *name) { uint8_t val; @@ -1405,6 +1431,14 @@ const struct penable chipset_enables[] = { {0x1039, 0x0746, NT, "SiS", "746", enable_flash_sis540}, {0x1039, 0x0748, NT, "SiS", "748", enable_flash_sis540}, {0x1039, 0x0755, NT, "SiS", "755", enable_flash_sis540}, + /* VIA northbridges */ + {0x1106, 0x0585, NT, "VIA", "VT82C585VPX", via_no_byte_merge}, + {0x1106, 0x0595, NT, "VIA", "VT82C595", via_no_byte_merge}, + {0x1106, 0x0597, NT, "VIA", "VT82C597", via_no_byte_merge}, + {0x1106, 0x0691, NT, "VIA", "VT82C69x", via_no_byte_merge}, /* 691, 693a, 694t, 694x checked */ + {0x1106, 0x0601, NT, "VIA", "VT8601/VT8601A", via_no_byte_merge}, + {0x1106, 0x8601, NT, "VIA", "VT8601T", via_no_byte_merge}, + /* VIA southbridges */ {0x1106, 0x8324, OK, "VIA", "CX700", enable_flash_vt823x}, {0x1106, 0x8231, NT, "VIA", "VT8231", enable_flash_vt823x}, {0x1106, 0x3074, NT, "VIA", "VT8233", enable_flash_vt823x}, -- 1.7.1

1 0

Re: [flashrom] flashing BIOS using flashrom on ASUS M2N-SLI DELUXE
by adrian.glaubitz＠googlemail.com 11 May '10

11 May '10

On Tue, May 11, 2010 at 03:59:46PM +0200, Kasper M. Nielsen wrote: > hi Adrian > > I don't know if the Ethernet MAC address has changed since the BIOS > flash, as I don't know what it was before. Does this look like the MAC > your Ethernet got after the flash? > > MAC: 04:4B:80:80:80:03 Ok, then it is always set to the same hardware address obviously. Mine reads the same: glaubitz@z6:~> /sbin/ifconfig |grep HWaddr br0 Link encap:Ethernet HWaddr 04:4b:80:80:80:03 eth0 Link encap:Ethernet HWaddr 04:4b:80:80:80:03 glaubitz@z6:~> Obviously not a good thing :/. At least we should know where the address can be found in the ROM image to correct it afterwards. Btw, there is supposed to be an AWARD flash utility from the mainboard vendor which allows to re-set the mac address. Have you tried this one? I think AWDFLASH.EXE can be used with a special option for that. > > but I can confirm that the board/computer wouldn't boot before a > reset-to-factory-defaults was done. I figured that it was standart > procedure after a BIOS flash, since it had to been done with my laptop > as well. Well, I didn't know that so I started to panic a bit since my machine wouldn't come up again. It didn't boot until I reset the CMOS. But good to know that my board still works well ;). Hilse fra Oslo, Adrian

1 0

About my motherboard.
by Buğra Gökalp Okçu 10 May '10

10 May '10

Hi, I have a laptop with sis chipset and i decided to give you some information about it if it would help. Below are the outputs from lspci, flashrom and superiotool. It seem it hasn't any significant information (except being unsupported). I hope this helps. Regards, Bugra lspci -nnvvvxxx 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 671MX [1039:0671] Subsystem: Fujitsu Siemens Computers Device [1734:1125] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: agpgart-sis 00: 39 10 71 06 07 00 10 22 00 00 00 06 00 20 00 00 10: 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 25 11 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) [1039:0003] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: d4000000-d40fffff Prefetchable memory behind bridge: c0000000-cfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00: 39 10 03 00 07 00 20 00 00 00 04 06 04 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 90 90 20 20 20: 00 d4 00 d4 00 c0 f0 cf 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 0c 00 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] [1039:0968] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 39 10 68 09 0f 00 00 02 01 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev 01) (prog-if 80 [Master]) Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step) [1039:5513] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 Interrupt: pin ? routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1000 [size=16] Capabilities: <access denied> Kernel driver in use: pata_sis Kernel modules: pata_sis 00: 39 10 13 55 05 00 10 02 01 80 01 01 00 80 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 01 10 00 00 00 00 00 00 00 00 00 00 39 10 13 55 30: 00 00 00 00 58 00 00 00 00 00 00 00 00 00 00 00 00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at d4204000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 39 10 01 70 17 00 80 02 0f 10 03 0c 00 20 80 00 10: 00 40 20 d4 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 39 10 01 70 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 50 00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at d4205000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 39 10 01 70 17 00 80 02 0f 10 03 0c 00 20 00 00 10: 00 50 20 d4 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 39 10 01 70 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 50 00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI]) Subsystem: Fujitsu Siemens Computers Device [1734:1125] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 22 Region 0: Memory at d4206000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00: 39 10 02 70 06 00 90 02 00 20 03 0c 08 20 00 00 10: 00 60 20 d4 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 25 11 30: 00 00 00 00 50 00 00 00 00 00 00 00 07 03 00 50 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02) Subsystem: Fujitsu Siemens Computers Device [1734:1125] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: Memory at d4407000 (32-bit, non-prefetchable) [size=128] Region 1: I/O ports at 1080 [size=128] Capabilities: <access denied> Kernel driver in use: sis190 Kernel modules: sis190 00: 39 10 91 01 07 00 10 02 02 00 00 02 00 00 00 00 10: 00 70 40 d4 81 10 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 25 11 30: 00 00 00 00 40 00 00 00 00 00 00 00 03 01 00 00 00:05.0 IDE interface [0101]: Silicon Integrated Systems [SiS] SATA Controller / IDE mode [1039:1183] (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Silicon Integrated Systems [SiS] SATA Controller / IDE mode [1039:1183] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 1058 [size=8] Region 1: I/O ports at 104c [size=4] Region 2: I/O ports at 1050 [size=8] Region 3: I/O ports at 1048 [size=4] Region 4: I/O ports at 1020 [size=16] Capabilities: <access denied> Kernel driver in use: sata_sis Kernel modules: sata_sis 00: 39 10 83 11 05 00 10 02 03 8f 01 01 00 20 00 00 10: 59 10 00 00 4d 10 00 00 51 10 00 00 49 10 00 00 20: 21 10 00 00 00 00 00 00 00 00 00 00 39 10 83 11 30: 00 00 00 00 58 00 00 00 00 00 00 00 05 01 00 00 00:06.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:000a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: d4100000-d41fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 39 10 0a 00 07 00 10 00 00 00 04 06 04 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 20 20: 10 d4 10 d4 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 b0 00 00 00 00 00 00 00 09 01 04 00 00:07.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:000a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=4d, subordinate=4e, sec-latency=0 I/O behind bridge: 00003000-00004fff Memory behind bridge: dc000000-dfffffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 39 10 0a 00 07 00 10 00 00 00 04 06 04 00 01 00 10: 00 00 00 00 00 00 00 00 00 4d 4e 00 31 41 00 00 20: 00 dc f0 df f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 b0 00 00 00 00 00 00 00 09 01 04 00 00:0f.0 Audio device [0403]: Silicon Integrated Systems [SiS] Azalia Audio Controller [1039:7502] Subsystem: Fujitsu Siemens Computers Device [1734:1125] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (13000ns min, 2750ns max) Interrupt: pin A routed to IRQ 18 Region 0: Memory at d4200000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00: 39 10 02 75 06 00 10 02 00 00 03 04 00 00 00 00 10: 00 00 20 d4 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 25 11 30: 00 00 00 00 50 00 00 00 00 00 00 00 04 01 34 0b 00:1f.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:0004] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 00: 39 10 04 00 07 00 10 00 00 00 04 06 04 00 01 00 10: 00 00 00 00 00 00 00 00 00 04 04 00 f1 01 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 d0 00 00 00 00 00 00 00 ff 00 04 00 01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter [1039:6351] (rev 10) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Siemens Computers Device [1734:1125] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 BIST result: 00 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 1: Memory at d4000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 9000 [size=128] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> 00: 39 10 51 63 03 00 30 02 10 00 00 03 00 00 00 80 10: 08 00 00 c0 00 00 00 d4 01 90 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 25 11 30: 00 00 00 00 40 00 00 00 00 00 00 00 09 01 00 00 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01) Subsystem: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01) [168c:3067] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4100000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath_pci Kernel modules: ath_pci, ath5k 00: 8c 16 1c 00 07 00 10 00 01 00 00 02 04 00 00 00 10: 04 00 10 d4 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 01 50 00 00 8c 16 67 30 30: 00 00 00 00 40 00 00 00 00 00 00 00 09 01 00 00 -------------------------------------------------------------- flashrom -V flashrom v0.9.1-r710 No coreboot table found. This chipset supports the following protocols: Non-SPI. WARNING: No chipset found. Flash detection will most likely fail. Calibrating delay loop... 491M loops per second, 100 myus = 199 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41 Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41 Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0x02, id2 0x00 Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xee, id2 0xba, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xee, id2 0xba, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41 Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50 Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50 Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x4e, id2 0x41 Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x02, id2 0x00 Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0xff, id2 0xff Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0xff, id2 0xff Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0x4e, id2 0x41 Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0xff, id2 0xff Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0xff, id2 0xff Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x02, id2 0x00 Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x4e, id2 0x41 Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xee, id2 0xba, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x4e, id2 0x41 Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x02, id2 0x00 Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50 Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x4e, id2 0x41 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x4e, id2 0x41 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0x02, id2 0x00 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0x02, id2 0x00 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x4e, id2 0x41 Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x02, id2 0x00 Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x4e, id2 0x41, id1 parity violation Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0x2, id2 0x0 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0x4e, id2 0x41 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename Note: flashrom can never write when the flash chip isn't found automatically. -------------------------- superiotool -deV superiotool r5537 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found. No Super I/O found

1 0

Asus M4N78 PRO
by Kimmo Vuorinen 09 May '10

09 May '10

flashrom v0.9.1-r995 on Linux 2.6.32.11-99.fc12.x86_64 (x86_64), built with libpci 3.1.6, GCC 4.4.3 20100127 (Red Hat 4.4.3-4) No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "M4N78 PRO" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8720 Found chipset "NVIDIA MCP78S", enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Guessed flash bus type is SPI Found SMBus device 10de:0752 at 00:01:1 SPI BAR is at 0xf7f80000, after clearing low bits BAR is at 0xf7f80000 Mapping MCP67 SPI at 0xf7f80000, unaligned size 0x544. SPI control is 0xc01a, enable=0, idle=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. SPI on this chipset is not supported yet. OK. This chipset supports the following protocols: None. No IT87* serial flash segment enabled. Calibrating delay loop... 993M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1033 us, 10000 myus = 10105 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for EON unknown EON SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. No EEPROM/flash device found.

1 0

flashrom -V and others
by Benjamin Henrion 09 May '10

09 May '10

See attached. The machine is a Acer EL1200 desktop computer. -- Benjamin Henrion <bhenrion(a)ffii.org> FFII Brussels - +32-484-566109 - +32-2-4148403

1 0

Erase+Write Success on VIA Epia-M
by Mark Morschhäuser 08 May '10

08 May '10

I successfully copied the Bios to a new, identical, hotswapped flash chip, see attached log. Greetings, Mark

1 0

PMC Pm49FL004 probe and read results
by Anders Jenbo 08 May '10

08 May '10

Hi hope this is helpfull ---- Msg sent via @Mail - http://atmail.com/

1 0

further ideas for future development of flashrom
by Matthias Olescher 08 May '10

08 May '10

Hello, after a short mail discussion with Carl-Daniel I want to present some new ideas and questions to everybody. Is there any solution to get the ft2232h or even the 1232h-development board to put it on an breadboard, similar to tiny boards with ft232 or ft245, for a moderate price? Farnell is very expensive and for digikey is it too less for shipping and sometimes the customs do not believe in free shipping and raise VAT on an fictive amount of 50-70 € for shipping. V-USB is not a solution because it is too slow. Carl-Daniel has mentioned the project Serprog of Urja Rannikko, can you send me please detailed information about how to build it and the source-code for the AVR? You can link it directly to an ft232 and so you can spare an max232 on both sides. Another solution for classical flashes was the IDE-Flasher of www.loet.de modified (but not tested yet, because of an lost example board) in http://www-user.tu-chemnitz.de/~heha/bastelecke/Rund%20um%20den%20PC/Progra… Unfortunatly the software is closed source, abandoned and doesn't mention newer development in the flash market. Another solution is a new MSP430 series with USB-Interface. http://focus.ti.com/docs/prod/folders/print/msp430f5529.html It is clocked up to 25 MHz, has from 32 kB up to 128 kB flash and 4+2 up to 8+2 kB Ram. It is aviable in 64VQFN 80LQFP and 80BGA. TI sends free samples to companies and research institutes e.g. universities. These MSP have not only SPI in Hardware a full speed USB but also enough gpio-pins for parallel flashes. The MSP430 is optimized for C programming, based on an instruction set of the DEC PDP. Another hint: it is not good to save screenshots and shematics in .jpg until they have been made with a digital camera or a scanner. .png with an reduced color depth is the optimal solution. If you want to answer me directly you can also do it in german. Thank you for every good answer. Matthias -- Das war's. Werbung bitte nicht beachten: GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01

1 0

[PATCH 2/2] convert general print messages to msg_g*
by Sean Nelson 07 May '10

07 May '10

--- cli_classic.c | 76 +++++++++++++++--------------- flash.h | 1 - flashrom.c | 144 ++++++++++++++++++++++++++++---------------------------- layout.c | 30 ++++++------ print.c | 74 +++++++++++++++--------------- print_wiki.c | 52 ++++++++++---------- 6 files changed, 188 insertions(+), 189 deletions(-) diff --git a/cli_classic.c b/cli_classic.c index 6cb0578..e99fa7c 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -27,79 +27,79 @@ #include <string.h> #include <stdlib.h> #include <getopt.h> #include "flash.h" #include "flashchips.h" void cli_classic_usage(const char *name) { const char *pname; int pnamelen; int remaining = 0; enum programmer p; - printf("Usage: %s [-VfLzhR] [-E|-r file|-w file|-v file] [-c chipname]\n" + msg_ginfo("Usage: %s [-VfLzhR] [-E|-r file|-w file|-v file] [-c chipname]\n" " [-m [vendor:]part] [-l file] [-i image] [-p programmer]\n\n", name); - printf("Please note that the command line interface for flashrom will " + msg_ginfo("Please note that the command line interface for flashrom will " "change before\nflashrom 1.0. Do not use flashrom in scripts " "or other automated tools without\nchecking that your flashrom" " version won't interpret options in a different way.\n\n"); - printf + msg_ginfo (" -r | --read: read flash and save into file\n" " -w | --write: write file into flash\n" " -v | --verify: verify flash against file\n" " -n | --noverify: don't verify flash against file\n" " -E | --erase: erase flash device\n" " -V | --verbose: more verbose output\n" " -c | --chip <chipname>: probe only for specified flash chip\n" #if INTERNAL_SUPPORT == 1 " -m | --mainboard <[vendor:]part>: override mainboard settings\n" #endif " -f | --force: force write without checking image\n" " -l | --layout <file.layout>: read ROM layout from file\n" " -i | --image <name>: only flash image name from flash layout\n" " -L | --list-supported: print supported devices\n" #if PRINT_WIKI_SUPPORT == 1 " -z | --list-supported-wiki: print supported devices in wiki syntax\n" #endif " -p | --programmer <name>: specify the programmer device"); for (p = 0; p < PROGRAMMER_INVALID; p++) { pname = programmer_table[p].name; pnamelen = strlen(pname); if (remaining - pnamelen - 2 < 0) { - printf("\n "); + msg_ginfo("\n "); remaining = 43; } else { - printf(" "); + msg_ginfo(" "); remaining--; } if (p == 0) { - printf("("); + msg_ginfo("("); remaining--; } - printf("%s", pname); + msg_ginfo("%s", pname); remaining -= pnamelen; if (p < PROGRAMMER_INVALID - 1) { - printf(","); + msg_ginfo(","); remaining--; } else { - printf(")\n"); + msg_ginfo(")\n"); } } - printf( + msg_ginfo( " -h | --help: print this help text\n" " -R | --version: print the version (release)\n" "\nYou can specify one of -E, -r, -w, -v or no operation. If no operation is\n" "specified, then all that happens is that flash info is dumped.\n\n"); exit(1); } int cli_classic(int argc, char *argv[]) { unsigned long size; /* Probe for up to three flash chips. */ struct flashchip *flash, *flashes[3]; const char *name; @@ -140,85 +140,85 @@ int cli_classic(int argc, char *argv[]) {"help", 0, 0, 'h'}, {"version", 0, 0, 'R'}, {0, 0, 0, 0} }; char *filename = NULL; char *tempstr = NULL; print_version(); if (argc > 1) { /* Yes, print them. */ - printf_debug("The arguments are:\n"); + msg_gdbg("The arguments are:\n"); for (i = 1; i < argc; ++i) - printf_debug("%s\n", argv[i]); + msg_gdbg("%s\n", argv[i]); } if (selfcheck()) exit(1); setbuf(stdout, NULL); while ((opt = getopt_long(argc, argv, optstring, long_options, &option_index)) != EOF) { switch (opt) { case 'r': if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " + msg_ginfo("More than one operation " "specified. Aborting.\n"); exit(1); } read_it = 1; break; case 'w': if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " + msg_ginfo("More than one operation " "specified. Aborting.\n"); exit(1); } write_it = 1; break; case 'v': //FIXME: gracefully handle superfluous -v if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " + msg_ginfo("More than one operation " "specified. Aborting.\n"); exit(1); } if (dont_verify_it) { - fprintf(stderr, "--verify and --noverify are" + msg_ginfo("--verify and --noverify are" "mutually exclusive. Aborting.\n"); exit(1); } verify_it = 1; break; case 'n': if (verify_it) { - fprintf(stderr, "--verify and --noverify are" + msg_ginfo("--verify and --noverify are" "mutually exclusive. Aborting.\n"); exit(1); } dont_verify_it = 1; break; case 'c': chip_to_probe = strdup(optarg); break; case 'V': verbose++; break; case 'E': if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " + msg_ginfo("More than one operation " "specified. Aborting.\n"); exit(1); } erase_it = 1; break; #if INTERNAL_SUPPORT == 1 case 'm': tempstr = strdup(optarg); lb_vendor_dev_from_string(tempstr); break; #endif case 'f': force = 1; @@ -253,27 +253,27 @@ int cli_classic(int argc, char *argv[]) break; default: /* The continue refers to the * for loop. It is here to be * able to differentiate between * foo and foobar. */ continue; } break; } } if (programmer == PROGRAMMER_INVALID) { - printf("Error: Unknown programmer %s.\n", optarg); + msg_ginfo("Error: Unknown programmer %s.\n", optarg); exit(1); } break; case 'R': /* print_version() is always called during startup. */ exit(0); break; case 'h': default: cli_classic_usage(argv[0]); break; } } @@ -281,106 +281,106 @@ int cli_classic(int argc, char *argv[]) if (list_supported) { print_supported(); exit(0); } #if PRINT_WIKI_SUPPORT == 1 if (list_supported_wiki) { print_supported_wiki(); exit(0); } #endif if (read_it && write_it) { - printf("Error: -r and -w are mutually exclusive.\n"); + msg_ginfo("Error: -r and -w are mutually exclusive.\n"); cli_classic_usage(argv[0]); } if (optind < argc) filename = argv[optind++]; if (optind < argc) { - printf("Error: Extra parameter found.\n"); + msg_ginfo("Error: Extra parameter found.\n"); cli_classic_usage(argv[0]); } if (programmer_init()) { - fprintf(stderr, "Error: Programmer initialization failed.\n"); + msg_ginfo("Error: Programmer initialization failed.\n"); exit(1); } // FIXME: Delay calibration should happen in programmer code. myusec_calibrate_delay(); for (i = 0; i < ARRAY_SIZE(flashes); i++) { flashes[i] = probe_flash(i ? flashes[i - 1] + 1 : flashchips, 0); if (!flashes[i]) for (i++; i < ARRAY_SIZE(flashes); i++) flashes[i] = NULL; } if (flashes[1]) { - printf("Multiple flash chips were detected:"); + msg_ginfo("Multiple flash chips were detected:"); for (i = 0; i < ARRAY_SIZE(flashes) && flashes[i]; i++) - printf(" %s", flashes[i]->name); - printf("\nPlease specify which chip to use with the -c <chipname> option.\n"); + msg_ginfo(" %s", flashes[i]->name); + msg_ginfo("\nPlease specify which chip to use with the -c <chipname> option.\n"); programmer_shutdown(); exit(1); } else if (!flashes[0]) { - printf("No EEPROM/flash device found.\n"); + msg_ginfo("No EEPROM/flash device found.\n"); if (!force || !chip_to_probe) { - printf("If you know which flash chip you have, and if this version of flashrom\n"); - printf("supports a similar flash chip, you can try to force read your chip. Run:\n"); - printf("flashrom -f -r -c similar_supported_flash_chip filename\n"); - printf("\n"); - printf("Note: flashrom can never write when the flash chip isn't found automatically.\n"); + msg_ginfo("If you know which flash chip you have, and if this version of flashrom\n"); + msg_ginfo("supports a similar flash chip, you can try to force read your chip. Run:\n"); + msg_ginfo("flashrom -f -r -c similar_supported_flash_chip filename\n"); + msg_ginfo("\n"); + msg_ginfo("Note: flashrom can never write when the flash chip isn't found automatically.\n"); } if (force && read_it && chip_to_probe) { - printf("Force read (-f -r -c) requested, forcing chip probe success:\n"); + msg_ginfo("Force read (-f -r -c) requested, forcing chip probe success:\n"); flashes[0] = probe_flash(flashchips, 1); if (!flashes[0]) { - printf("flashrom does not support a flash chip named '%s'.\n", chip_to_probe); - printf("Run flashrom -L to view the hardware supported in this flashrom version.\n"); + msg_ginfo("flashrom does not support a flash chip named '%s'.\n", chip_to_probe); + msg_ginfo("Run flashrom -L to view the hardware supported in this flashrom version.\n"); exit(1); } - printf("Please note that forced reads most likely contain garbage.\n"); + msg_ginfo("Please note that forced reads most likely contain garbage.\n"); return read_flash(flashes[0], filename); } // FIXME: flash writes stay enabled! programmer_shutdown(); exit(1); } flash = flashes[0]; check_chip_supported(flash); size = flash->total_size * 1024; if (check_max_decode((buses_supported & flash->bustype), size) && (!force)) { - fprintf(stderr, "Chip is too big for this programmer " + msg_ginfo("Chip is too big for this programmer " "(-V gives details). Use --force to override.\n"); programmer_shutdown(); return 1; } if (!(read_it | write_it | verify_it | erase_it)) { - printf("No operations were specified.\n"); + msg_ginfo("No operations were specified.\n"); // FIXME: flash writes stay enabled! programmer_shutdown(); exit(1); } if (!filename && !erase_it) { - printf("Error: No filename specified.\n"); + msg_ginfo("Error: No filename specified.\n"); // FIXME: flash writes stay enabled! programmer_shutdown(); exit(1); } /* Always verify write operations unless -n is used. */ if (write_it && !dont_verify_it) verify_it = 1; return doit(flash, force, filename, read_it, write_it, erase_it, verify_it); } diff --git a/flash.h b/flash.h index aee95a3..3d0d114 100644 --- a/flash.h +++ b/flash.h @@ -521,27 +521,26 @@ enum write_granularity { extern enum chipbustype buses_supported; struct decode_sizes { uint32_t parallel; uint32_t lpc; uint32_t fwh; uint32_t spi; }; extern struct decode_sizes max_rom_decode; extern char *programmer_param; extern unsigned long flashbase; extern int verbose; extern const char *flashrom_version; extern char *chip_to_probe; -#define printf_debug(x...) { if (verbose) printf(x); } void map_flash_registers(struct flashchip *flash); int read_memmapped(struct flashchip *flash, uint8_t *buf, int start, int len); int erase_flash(struct flashchip *flash); struct flashchip *probe_flash(struct flashchip *first_flash, int force); int read_flash(struct flashchip *flash, char *filename); void check_chip_supported(struct flashchip *flash); int check_max_decode(enum chipbustype buses, uint32_t size); int min(int a, int b); int max(int a, int b); char *extract_param(char **haystack, char *needle, char *delim); int check_erased_range(struct flashchip *flash, int start, int len); int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, char *message); int need_erase(uint8_t *have, uint8_t *want, int len, enum write_granularity gran); diff --git a/flashrom.c b/flashrom.c index 2450dee..eb52661 100644 --- a/flashrom.c +++ b/flashrom.c @@ -341,27 +341,27 @@ struct shutdown_func_data { } shutdown_fn[SHUTDOWN_MAXFN]; /* Register a function to be executed on programmer shutdown. * The advantage over atexit() is that you can supply a void pointer which will * be used as parameter to the registered function upon programmer shutdown. * This pointer can point to arbitrary data used by said function, e.g. undo * information for GPIO settings etc. If unneeded, set data=NULL. * Please note that the first (void *data) belongs to the function signature of * the function passed as first parameter. */ int register_shutdown(void (*function) (void *data), void *data) { if (shutdown_fn_count >= SHUTDOWN_MAXFN) { - msg_perr("Tried to register more than %n shutdown functions.\n", + msg_gerr("Tried to register more than %n shutdown functions.\n", SHUTDOWN_MAXFN); return 1; } shutdown_fn[shutdown_fn_count].func = function; shutdown_fn[shutdown_fn_count].data = data; shutdown_fn_count++; return 0; } int programmer_init(void) { return programmer_table[programmer].init(); @@ -500,56 +500,56 @@ char *extract_param(char **haystack, char *needle, char *delim) if (strchr(delim, *(param_pos - 1))) break; /* Continue searching. */ param_pos++; param_pos = strstr(param_pos, needle); } while (1); if (param_pos) { param_pos += strlen(needle); devlen = strcspn(param_pos, delim); if (devlen) { dev = malloc(devlen + 1); if (!dev) { - fprintf(stderr, "Out of memory!\n"); + msg_gerr("Out of memory!\n"); exit(1); } strncpy(dev, param_pos, devlen); dev[devlen] = '\0'; } rest = param_pos + devlen; rest += strspn(rest, delim); param_pos -= strlen(needle); memmove(param_pos, rest, strlen(rest) + 1); tmp = realloc(*haystack, strlen(*haystack) + 1); if (!tmp) { - fprintf(stderr, "Out of memory!\n"); + msg_gerr("Out of memory!\n"); exit(1); } *haystack = tmp; } return dev; } /* start is an offset to the base address of the flash chip */ int check_erased_range(struct flashchip *flash, int start, int len) { int ret; uint8_t *cmpbuf = malloc(len); if (!cmpbuf) { - fprintf(stderr, "Could not allocate memory!\n"); + msg_gerr("Could not allocate memory!\n"); exit(1); } memset(cmpbuf, 0xff, len); ret = verify_range(flash, cmpbuf, start, len, "ERASE"); free(cmpbuf); return ret; } /** * @cmpbuf buffer to compare against, cmpbuf[0] is expected to match the flash content at location start * @start offset to the base address of the flash chip * @len length of the verified area @@ -557,36 +557,36 @@ int check_erased_range(struct flashchip *flash, int start, int len) * @return 0 for success, -1 for failure */ int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, char *message) { int i, j, starthere, lenhere, ret = 0; int page_size = flash->page_size; uint8_t *readbuf = malloc(page_size); int failcount = 0; if (!len) goto out_free; if (!flash->read) { - fprintf(stderr, "ERROR: flashrom has no read function for this flash chip.\n"); + msg_gerr("ERROR: flashrom has no read function for this flash chip.\n"); return 1; } if (!readbuf) { - fprintf(stderr, "Could not allocate memory!\n"); + msg_gerr("Could not allocate memory!\n"); exit(1); } if (start + len > flash->total_size * 1024) { - fprintf(stderr, "Error: %s called with start 0x%x + len 0x%x >" + msg_gerr("Error: %s called with start 0x%x + len 0x%x >" " total_size 0x%x\n", __func__, start, len, flash->total_size * 1024); ret = -1; goto out_free; } if (!message) message = "VERIFY"; /* Warning: This loop has a very unusual condition and body. * The loop needs to go through each page with at least one affected * byte. The lowest page number is (start / page_size) since that * division rounds down. The highest page number we want is the page * where the last byte of the range lives. That last byte has the @@ -594,36 +594,36 @@ int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, c * (start + len - 1) / page_size. Since we want to include that last * page as well, the loop condition uses <=. */ for (i = start / page_size; i <= (start + len - 1) / page_size; i++) { /* Byte position of the first byte in the range in this page. */ starthere = max(start, i * page_size); /* Length of bytes in the range in this page. */ lenhere = min(start + len, (i + 1) * page_size) - starthere; flash->read(flash, readbuf, starthere, lenhere); for (j = 0; j < lenhere; j++) { if (cmpbuf[starthere - start + j] != readbuf[j]) { /* Only print the first failure. */ if (!failcount++) - fprintf(stderr, "%s FAILED at 0x%08x! " + msg_gerr("%s FAILED at 0x%08x! " "Expected=0x%02x, Read=0x%02x,", message, starthere + j, cmpbuf[starthere - start + j], readbuf[j]); } } } if (failcount) { - fprintf(stderr, " failed byte count from 0x%08x-0x%08x: 0x%x\n", + msg_gerr(" failed byte count from 0x%08x-0x%08x: 0x%x\n", start, start + len - 1, failcount); ret = -1; } out_free: free(readbuf); return ret; } /** * Check if the buffer @have can be programmed to the content of @want without * erasing. This is only possible if all chunks of size @gran are either kept * as-is or changed from an all-ones state to any other state. @@ -728,27 +728,27 @@ int need_erase(uint8_t *have, uint8_t *want, int len, enum write_granularity gra * Patterns 10-11 are special purpose for detecting subblock aliasing with * block sizes >256 bytes (some Dataflash chips etc.) * AND Pattern 8/9 == Pattern 12 * AND Pattern 10/11 == Pattern 12 * Pattern 13 is the completely erased state. * None of the patterns can detect aliasing at boundaries which are a multiple * of 16 MBytes (but such chips do not exist anyway for Parallel/LPC/FWH/SPI). */ int generate_testpattern(uint8_t *buf, uint32_t size, int variant) { int i; if (!buf) { - fprintf(stderr, "Invalid buffer!\n"); + msg_gerr("Invalid buffer!\n"); return 1; } switch (variant) { case 0: for (i = 0; i < size; i++) buf[i] = (i & 0xf) << 4 | 0x5; break; case 1: for (i = 0; i < size; i++) buf[i] = (i & 0xf) << 4 | 0xa; break; case 2: @@ -816,64 +816,64 @@ int generate_testpattern(uint8_t *buf, uint32_t size, int variant) buf[i * 256 + 255] = i & 0xff; } } return 0; } int check_max_decode(enum chipbustype buses, uint32_t size) { int limitexceeded = 0; if ((buses & CHIP_BUSTYPE_PARALLEL) && (max_rom_decode.parallel < size)) { limitexceeded++; - printf_debug("Chip size %u kB is bigger than supported " + msg_gdbg("Chip size %u kB is bigger than supported " "size %u kB of chipset/board/programmer " "for %s interface, " "probe/read/erase/write may fail. ", size / 1024, max_rom_decode.parallel / 1024, "Parallel"); } if ((buses & CHIP_BUSTYPE_LPC) && (max_rom_decode.lpc < size)) { limitexceeded++; - printf_debug("Chip size %u kB is bigger than supported " + msg_gdbg("Chip size %u kB is bigger than supported " "size %u kB of chipset/board/programmer " "for %s interface, " "probe/read/erase/write may fail. ", size / 1024, max_rom_decode.lpc / 1024, "LPC"); } if ((buses & CHIP_BUSTYPE_FWH) && (max_rom_decode.fwh < size)) { limitexceeded++; - printf_debug("Chip size %u kB is bigger than supported " + msg_gdbg("Chip size %u kB is bigger than supported " "size %u kB of chipset/board/programmer " "for %s interface, " "probe/read/erase/write may fail. ", size / 1024, max_rom_decode.fwh / 1024, "FWH"); } if ((buses & CHIP_BUSTYPE_SPI) && (max_rom_decode.spi < size)) { limitexceeded++; - printf_debug("Chip size %u kB is bigger than supported " + msg_gdbg("Chip size %u kB is bigger than supported " "size %u kB of chipset/board/programmer " "for %s interface, " "probe/read/erase/write may fail. ", size / 1024, max_rom_decode.spi / 1024, "SPI"); } if (!limitexceeded) return 0; /* Sometimes chip and programmer have more than one bus in common, * and the limit is not exceeded on all buses. Tell the user. */ if (bitcount(buses) > limitexceeded) /* FIXME: This message is designed towards CLI users. */ - printf_debug("There is at least one common chip/programmer " + msg_gdbg("There is at least one common chip/programmer " "interface which can support a chip of this size. " "You can try --force at your own risk.\n"); return 1; } struct flashchip *probe_flash(struct flashchip *first_flash, int force) { struct flashchip *flash; unsigned long base = 0; uint32_t size; enum chipbustype buses_common; char *tmp; @@ -914,78 +914,78 @@ struct flashchip *probe_flash(struct flashchip *first_flash, int force) goto notfound; if (first_flash == flashchips || flash->model_id != GENERIC_DEVICE_ID) break; notfound: programmer_unmap_flash_region((void *)flash->virtual_memory, size); } if (!flash || !flash->name) return NULL; - printf("Found chip \"%s %s\" (%d KB, %s) at physical address 0x%lx.\n", + msg_ginfo("Found chip \"%s %s\" (%d KB, %s) at physical address 0x%lx.\n", flash->vendor, flash->name, flash->total_size, flashbuses_to_text(flash->bustype), base); if (flash->printlock) flash->printlock(flash); return flash; } int verify_flash(struct flashchip *flash, uint8_t *buf) { int ret; int total_size = flash->total_size * 1024; - printf("Verifying flash... "); + msg_ginfo("Verifying flash... "); ret = verify_range(flash, buf, 0, total_size, NULL); if (!ret) - printf("VERIFIED. \n"); + msg_ginfo("VERIFIED. \n"); return ret; } int read_flash(struct flashchip *flash, char *filename) { unsigned long numbytes; FILE *image; unsigned long size = flash->total_size * 1024; unsigned char *buf = calloc(size, sizeof(char)); if (!filename) { - printf("Error: No filename specified.\n"); + msg_ginfo("Error: No filename specified.\n"); return 1; } if ((image = fopen(filename, "wb")) == NULL) { perror(filename); exit(1); } - printf("Reading flash... "); + msg_ginfo("Reading flash... "); if (!flash->read) { - printf("FAILED!\n"); - fprintf(stderr, "ERROR: flashrom has no read function for this flash chip.\n"); + msg_ginfo("FAILED!\n"); + msg_gerr("ERROR: flashrom has no read function for this flash chip.\n"); return 1; } else flash->read(flash, buf, 0, size); numbytes = fwrite(buf, 1, size, image); fclose(image); free(buf); - printf("%s.\n", numbytes == size ? "done" : "FAILED"); + msg_ginfo("%s.\n", numbytes == size ? "done" : "FAILED"); if (numbytes != size) return 1; return 0; } /* This function shares a lot of its structure with erase_flash(). * Even if an error is found, the function will keep going and check the rest. */ int selfcheck_eraseblocks(struct flashchip *flash) { int i, j, k; int ret = 0; @@ -1007,27 +1007,27 @@ int selfcheck_eraseblocks(struct flashchip *flash) if (!eraser.eraseblocks[i].count && eraser.eraseblocks[i].size) { msg_gerr("ERROR: Flash chip %s erase function " "%i region %i has count 0. Please report" " a bug at flashrom(a)flashrom.org\n", flash->name, k, i); ret = 1; } done += eraser.eraseblocks[i].count * eraser.eraseblocks[i].size; } /* Empty eraseblock definition with erase function. */ if (!done && eraser.block_erase) - msg_pspew("Strange: Empty eraseblock definition with " + msg_gspew("Strange: Empty eraseblock definition with " "non-empty erase function. Not an error.\n"); if (!done) continue; if (done != flash->total_size * 1024) { msg_gerr("ERROR: Flash chip %s erase function %i " "region walking resulted in 0x%06x bytes total," " expected 0x%06x bytes. Please report a bug at" " flashrom(a)flashrom.org\n", flash->name, k, done, flash->total_size * 1024); ret = 1; } if (!eraser.block_erase) continue; @@ -1044,106 +1044,106 @@ int selfcheck_eraseblocks(struct flashchip *flash) flash->name, k, j); ret = 1; } } } return ret; } int erase_flash(struct flashchip *flash) { int i, j, k, ret = 0, found = 0; unsigned int start, len; - printf("Erasing flash chip... "); + msg_ginfo("Erasing flash chip... "); for (k = 0; k < NUM_ERASEFUNCTIONS; k++) { unsigned int done = 0; struct block_eraser eraser = flash->block_erasers[k]; - printf_debug("Looking at blockwise erase function %i... ", k); + msg_gdbg("Looking at blockwise erase function %i... ", k); if (!eraser.block_erase && !eraser.eraseblocks[0].count) { - printf_debug("not defined. " + msg_gdbg("not defined. " "Looking for another erase function.\n"); continue; } if (!eraser.block_erase && eraser.eraseblocks[0].count) { - printf_debug("eraseblock layout is known, but no " + msg_gdbg("eraseblock layout is known, but no " "matching block erase function found. " "Looking for another erase function.\n"); continue; } if (eraser.block_erase && !eraser.eraseblocks[0].count) { - printf_debug("block erase function found, but " + msg_gdbg("block erase function found, but " "eraseblock layout is unknown. " "Looking for another erase function.\n"); continue; } found = 1; - printf_debug("trying... "); + msg_gdbg("trying... "); for (i = 0; i < NUM_ERASEREGIONS; i++) { /* count==0 for all automatically initialized array * members so the loop below won't be executed for them. */ for (j = 0; j < eraser.eraseblocks[i].count; j++) { start = done + eraser.eraseblocks[i].size * j; len = eraser.eraseblocks[i].size; - printf_debug("0x%06x-0x%06x, ", start, + msg_gdbg("0x%06x-0x%06x, ", start, start + len - 1); ret = eraser.block_erase(flash, start, len); if (ret) break; } if (ret) break; done += eraser.eraseblocks[i].count * eraser.eraseblocks[i].size; } - printf_debug("\n"); + msg_gdbg("\n"); /* If everything is OK, don't try another erase function. */ if (!ret) break; } if (!found) { - fprintf(stderr, "ERROR: flashrom has no erase function for this flash chip.\n"); + msg_gerr("ERROR: flashrom has no erase function for this flash chip.\n"); return 1; } if (ret) { - fprintf(stderr, "FAILED!\n"); + msg_gerr("FAILED!\n"); } else { - printf("SUCCESS.\n"); + msg_ginfo("SUCCESS.\n"); } return ret; } void emergency_help_message(void) { - fprintf(stderr, "Your flash chip is in an unknown state.\n" + msg_gerr("Your flash chip is in an unknown state.\n" "Get help on IRC at irc.freenode.net (channel #flashrom) or\n" "mail flashrom(a)flashrom.org!\n--------------------" "-----------------------------------------------------------\n" "DO NOT REBOOT OR POWEROFF!\n"); } /* The way to go if you want a delimited list of programmers*/ void list_programmers(char *delim) { enum programmer p; for (p = 0; p < PROGRAMMER_INVALID; p++) { - printf("%s", programmer_table[p].name); + msg_ginfo("%s", programmer_table[p].name); if (p < PROGRAMMER_INVALID - 1) - printf("%s", delim); + msg_ginfo("%s", delim); } - printf("\n"); + msg_ginfo("\n"); } void print_sysinfo(void) { #if HAVE_UTSNAME == 1 struct utsname osinfo; uname(&osinfo); msg_ginfo(" on %s %s (%s)", osinfo.sysname, osinfo.release, osinfo.machine); #else msg_ginfo(" on unknown machine"); #endif @@ -1162,91 +1162,91 @@ void print_sysinfo(void) #ifdef __VERSION__ msg_ginfo(" %s", __VERSION__); #else msg_ginfo(" unknown version"); #endif #else msg_ginfo(" unknown compiler"); #endif msg_ginfo("\n"); } void print_version(void) { - printf("flashrom v%s", flashrom_version); + msg_ginfo("flashrom v%s\n", flashrom_version); print_sysinfo(); } int selfcheck(void) { int ret = 0; struct flashchip *flash; /* Safety check. Instead of aborting after the first error, check * if more errors exist. */ if (ARRAY_SIZE(programmer_table) - 1 != PROGRAMMER_INVALID) { - fprintf(stderr, "Programmer table miscompilation!\n"); + msg_gerr("Programmer table miscompilation!\n"); ret = 1; } if (spi_programmer_count - 1 != SPI_CONTROLLER_INVALID) { - fprintf(stderr, "SPI programmer table miscompilation!\n"); + msg_gerr("SPI programmer table miscompilation!\n"); ret = 1; } #if BITBANG_SPI_SUPPORT == 1 if (bitbang_spi_master_count - 1 != BITBANG_SPI_INVALID) { - fprintf(stderr, "Bitbanging SPI master table miscompilation!\n"); + msg_gerr("Bitbanging SPI master table miscompilation!\n"); ret = 1; } #endif for (flash = flashchips; flash && flash->name; flash++) if (selfcheck_eraseblocks(flash)) ret = 1; return ret; } void check_chip_supported(struct flashchip *flash) { if (TEST_OK_MASK != (flash->tested & TEST_OK_MASK)) { - printf("===\n"); + msg_ginfo("===\n"); if (flash->tested & TEST_BAD_MASK) { - printf("This flash part has status NOT WORKING for operations:"); + msg_ginfo("This flash part has status NOT WORKING for operations:"); if (flash->tested & TEST_BAD_PROBE) - printf(" PROBE"); + msg_ginfo(" PROBE"); if (flash->tested & TEST_BAD_READ) - printf(" READ"); + msg_ginfo(" READ"); if (flash->tested & TEST_BAD_ERASE) - printf(" ERASE"); + msg_ginfo(" ERASE"); if (flash->tested & TEST_BAD_WRITE) - printf(" WRITE"); - printf("\n"); + msg_ginfo(" WRITE"); + msg_ginfo("\n"); } if ((!(flash->tested & TEST_BAD_PROBE) && !(flash->tested & TEST_OK_PROBE)) || (!(flash->tested & TEST_BAD_READ) && !(flash->tested & TEST_OK_READ)) || (!(flash->tested & TEST_BAD_ERASE) && !(flash->tested & TEST_OK_ERASE)) || (!(flash->tested & TEST_BAD_WRITE) && !(flash->tested & TEST_OK_WRITE))) { - printf("This flash part has status UNTESTED for operations:"); + msg_ginfo("This flash part has status UNTESTED for operations:"); if (!(flash->tested & TEST_BAD_PROBE) && !(flash->tested & TEST_OK_PROBE)) - printf(" PROBE"); + msg_ginfo(" PROBE"); if (!(flash->tested & TEST_BAD_READ) && !(flash->tested & TEST_OK_READ)) - printf(" READ"); + msg_ginfo(" READ"); if (!(flash->tested & TEST_BAD_ERASE) && !(flash->tested & TEST_OK_ERASE)) - printf(" ERASE"); + msg_ginfo(" ERASE"); if (!(flash->tested & TEST_BAD_WRITE) && !(flash->tested & TEST_OK_WRITE)) - printf(" WRITE"); - printf("\n"); + msg_ginfo(" WRITE"); + msg_ginfo("\n"); } /* FIXME: This message is designed towards CLI users. */ - printf("Please email a report to flashrom(a)flashrom.org if any " + msg_ginfo("Please email a report to flashrom(a)flashrom.org if any " "of the above operations\nwork correctly for you with " "this flash part. Please include the flashrom\noutput " "with the additional -V option for all operations you " "tested (-V, -rV,\n-wV, -EV), and mention which " "mainboard or programmer you tested.\nThanks for your " "help!\n===\n"); } } int main(int argc, char *argv[]) { return cli_classic(argc, argv); } @@ -1257,127 +1257,127 @@ int main(int argc, char *argv[]) int doit(struct flashchip *flash, int force, char *filename, int read_it, int write_it, int erase_it, int verify_it) { uint8_t *buf; unsigned long numbytes; FILE *image; int ret = 0; unsigned long size; size = flash->total_size * 1024; buf = (uint8_t *) calloc(size, sizeof(char)); if (erase_it) { if (flash->tested & TEST_BAD_ERASE) { - fprintf(stderr, "Erase is not working on this chip. "); + msg_gerr("Erase is not working on this chip. "); if (!force) { - fprintf(stderr, "Aborting.\n"); + msg_gerr("Aborting.\n"); programmer_shutdown(); return 1; } else { - fprintf(stderr, "Continuing anyway.\n"); + msg_gerr("Continuing anyway.\n"); } } if (flash->unlock) flash->unlock(flash); if (erase_flash(flash)) { emergency_help_message(); programmer_shutdown(); return 1; } } else if (read_it) { if (flash->unlock) flash->unlock(flash); if (read_flash(flash, filename)) { programmer_shutdown(); return 1; } } else { struct stat image_stat; if (flash->unlock) flash->unlock(flash); if (flash->tested & TEST_BAD_ERASE) { - fprintf(stderr, "Erase is not working on this chip " + msg_gerr("Erase is not working on this chip " "and erase is needed for write. "); if (!force) { - fprintf(stderr, "Aborting.\n"); + msg_gerr("Aborting.\n"); programmer_shutdown(); return 1; } else { - fprintf(stderr, "Continuing anyway.\n"); + msg_gerr("Continuing anyway.\n"); } } if (flash->tested & TEST_BAD_WRITE) { - fprintf(stderr, "Write is not working on this chip. "); + msg_gerr("Write is not working on this chip. "); if (!force) { - fprintf(stderr, "Aborting.\n"); + msg_gerr("Aborting.\n"); programmer_shutdown(); return 1; } else { - fprintf(stderr, "Continuing anyway.\n"); + msg_gerr("Continuing anyway.\n"); } } if ((image = fopen(filename, "rb")) == NULL) { perror(filename); programmer_shutdown(); exit(1); } if (fstat(fileno(image), &image_stat) != 0) { perror(filename); programmer_shutdown(); exit(1); } if (image_stat.st_size != flash->total_size * 1024) { - fprintf(stderr, "Error: Image size doesn't match\n"); + msg_gerr("Error: Image size doesn't match\n"); programmer_shutdown(); exit(1); } numbytes = fread(buf, 1, size, image); #if INTERNAL_SUPPORT == 1 show_id(buf, size, force); #endif fclose(image); if (numbytes != size) { - fprintf(stderr, "Error: Failed to read file. Got %ld bytes, wanted %ld!\n", numbytes, size); + msg_gerr("Error: Failed to read file. Got %ld bytes, wanted %ld!\n", numbytes, size); programmer_shutdown(); return 1; } } // This should be moved into each flash part's code to do it // cleanly. This does the job. handle_romentries(buf, flash); // //////////////////////////////////////////////////////////// if (write_it) { - printf("Writing flash chip... "); + msg_ginfo("Writing flash chip... "); if (!flash->write) { - fprintf(stderr, "Error: flashrom has no write function for this flash chip.\n"); + msg_gerr("Error: flashrom has no write function for this flash chip.\n"); programmer_shutdown(); return 1; } ret = flash->write(flash, buf); if (ret) { - fprintf(stderr, "FAILED!\n"); + msg_gerr("FAILED!\n"); emergency_help_message(); programmer_shutdown(); return 1; } else { - printf("COMPLETE.\n"); + msg_ginfo("COMPLETE.\n"); } } if (verify_it) { /* Work around chips which need some time to calm down. */ if (write_it) programmer_delay(1000*1000); ret = verify_flash(flash, buf); /* If we tried to write, and verification now fails, we * might have an emergency situation. */ if (ret && write_it) emergency_help_message(); diff --git a/layout.c b/layout.c index 26b7c6a..e9760d5 100644 --- a/layout.c +++ b/layout.c @@ -63,149 +63,149 @@ int show_id(uint8_t *bios, int size, int force) walk--; } /* * Check if coreboot last image size is 0 or not a multiple of 1k or * bigger than the chip or if the pointers to vendor ID or mainboard ID * are outside the image of if the start of ID strings are nonsensical * (nonprintable and not \0). */ mb_part_offset = *(walk - 1); mb_vendor_offset = *(walk - 2); if ((*walk) == 0 || ((*walk) & 0x3ff) != 0 || (*walk) > size || mb_part_offset > size || mb_vendor_offset > size) { - printf("Flash image seems to be a legacy BIOS. Disabling checks.\n"); + msg_ginfo("Flash image seems to be a legacy BIOS. Disabling checks.\n"); return 0; } mb_part = (char *)(bios + size - mb_part_offset); mb_vendor = (char *)(bios + size - mb_vendor_offset); if (!isprint((unsigned char)*mb_part) || !isprint((unsigned char)*mb_vendor)) { - printf("Flash image seems to have garbage in the ID location." + msg_ginfo("Flash image seems to have garbage in the ID location." " Disabling checks.\n"); return 0; } - printf_debug("coreboot last image size " + msg_gdbg("coreboot last image size " "(not ROM size) is %d bytes.\n", *walk); mainboard_part = strdup(mb_part); mainboard_vendor = strdup(mb_vendor); - printf_debug("Manufacturer: %s\n", mainboard_vendor); - printf_debug("Mainboard ID: %s\n", mainboard_part); + msg_gdbg("Manufacturer: %s\n", mainboard_vendor); + msg_gdbg("Mainboard ID: %s\n", mainboard_part); /* * If lb_vendor is not set, the coreboot table was * not found. Nor was -m VENDOR:PART specified. */ if (!lb_vendor || !lb_part) { - printf("Note: If the following flash access fails, " + msg_ginfo("Note: If the following flash access fails, " "try -m <vendor>:<mainboard>.\n"); return 0; } /* These comparisons are case insensitive to make things * a little less user^Werror prone. */ if (!strcasecmp(mainboard_vendor, lb_vendor) && !strcasecmp(mainboard_part, lb_part)) { - printf_debug("This firmware image matches this mainboard.\n"); + msg_ginfo("This firmware image matches this mainboard.\n"); } else { if (force) { - printf("WARNING: This firmware image does not " + msg_ginfo("WARNING: This firmware image does not " "seem to fit to this machine - forcing it.\n"); } else { - printf("ERROR: Your firmware image (%s:%s) does not " + msg_ginfo("ERROR: Your firmware image (%s:%s) does not " "appear to\n be correct for the detected " "mainboard (%s:%s)\n\nOverride with --force if you " "are absolutely sure that you\nare using a correct " "image for this mainboard or override\nthe detected " "values with --mainboard <vendor>:<mainboard>.\n\n", mainboard_vendor, mainboard_part, lb_vendor, lb_part); exit(1); } } return 0; } #endif int read_romlayout(char *name) { FILE *romlayout; char tempstr[256]; int i; romlayout = fopen(name, "r"); if (!romlayout) { - fprintf(stderr, "ERROR: Could not open ROM layout (%s).\n", + msg_gerr("ERROR: Could not open ROM layout (%s).\n", name); return -1; } while (!feof(romlayout)) { char *tstr1, *tstr2; if (2 != fscanf(romlayout, "%s %s\n", tempstr, rom_entries[romimages].name)) continue; #if 0 // fscanf does not like arbitrary comments like that :( later if (tempstr[0] == '#') { continue; } #endif tstr1 = strtok(tempstr, ":"); tstr2 = strtok(NULL, ":"); if (!tstr1 || !tstr2) { - fprintf(stderr, "Error parsing layout file.\n"); + msg_gerr("Error parsing layout file.\n"); fclose(romlayout); return 1; } rom_entries[romimages].start = strtol(tstr1, (char **)NULL, 16); rom_entries[romimages].end = strtol(tstr2, (char **)NULL, 16); rom_entries[romimages].included = 0; romimages++; } for (i = 0; i < romimages; i++) { - printf_debug("romlayout %08x - %08x named %s\n", + msg_gdbg("romlayout %08x - %08x named %s\n", rom_entries[i].start, rom_entries[i].end, rom_entries[i].name); } fclose(romlayout); return 0; } int find_romentry(char *name) { int i; if (!romimages) return -1; - printf("Looking for \"%s\"... ", name); + msg_ginfo("Looking for \"%s\"... ", name); for (i = 0; i < romimages; i++) { if (!strcmp(rom_entries[i].name, name)) { rom_entries[i].included = 1; - printf("found.\n"); + msg_ginfo("found.\n"); return i; } } - printf("not found.\n"); // Not found. Error. + msg_ginfo("not found.\n"); // Not found. Error. return -1; } int handle_romentries(uint8_t *buffer, struct flashchip *flash) { int i; // This function does not save flash write cycles. // // Also it does not cope with overlapping rom layout // sections. // example: diff --git a/print.c b/print.c index 2a2c81b..e7ff27e 100644 --- a/print.c +++ b/print.c @@ -47,27 +47,27 @@ char *flashbuses_to_text(enum chipbustype bustype) if (bustype & CHIP_BUSTYPE_FWH) ret = strcat_realloc(ret, "FWH,"); if (bustype & CHIP_BUSTYPE_SPI) ret = strcat_realloc(ret, "SPI,"); if (bustype == CHIP_BUSTYPE_NONE) ret = strcat_realloc(ret, "None,"); } /* Kill last comma. */ ret[strlen(ret) - 1] = '\0'; ret = realloc(ret, strlen(ret) + 1); return ret; } -#define POS_PRINT(x) do { pos += strlen(x); printf(x); } while (0) +#define POS_PRINT(x) do { pos += strlen(x); msg_ginfo(x); } while (0) static int digits(int n) { int i; if (!n) return 1; for (i = 0; n; ++i) n /= 10; return i; } @@ -77,172 +77,172 @@ void print_supported_chips(void) int okcol = 0, pos = 0, i, chipcount = 0; struct flashchip *f; for (f = flashchips; f->name != NULL; f++) { if (GENERIC_DEVICE_ID == f->model_id) continue; okcol = max(okcol, strlen(f->vendor) + 1 + strlen(f->name)); } okcol = (okcol + 7) & ~7; for (f = flashchips; f->name != NULL; f++) chipcount++; - printf("\nSupported flash chips (total: %d):\n\n", chipcount); + msg_ginfo("\nSupported flash chips (total: %d):\n\n", chipcount); POS_PRINT("Vendor: Device:"); while (pos < okcol) { - printf("\t"); + msg_ginfo("\t"); pos += 8 - (pos % 8); } - printf("Tested OK:\tKnown BAD: Size/KB: Type:\n\n"); - printf("(P = PROBE, R = READ, E = ERASE, W = WRITE)\n\n"); + msg_ginfo("Tested OK:\tKnown BAD: Size/KB: Type:\n\n"); + msg_ginfo("(P = PROBE, R = READ, E = ERASE, W = WRITE)\n\n"); for (f = flashchips; f->name != NULL; f++) { /* Don't print "unknown XXXX SPI chip" entries. */ if (!strncmp(f->name, "unknown", 7)) continue; - printf("%s", f->vendor); + msg_ginfo("%s", f->vendor); for (i = 0; i < 10 - strlen(f->vendor); i++) - printf(" "); - printf("%s", f->name); + msg_ginfo(" "); + msg_ginfo("%s", f->name); pos = 10 + strlen(f->name); while (pos < okcol) { - printf("\t"); + msg_ginfo("\t"); pos += 8 - (pos % 8); } if ((f->tested & TEST_OK_MASK)) { if ((f->tested & TEST_OK_PROBE)) POS_PRINT("P "); if ((f->tested & TEST_OK_READ)) POS_PRINT("R "); if ((f->tested & TEST_OK_ERASE)) POS_PRINT("E "); if ((f->tested & TEST_OK_WRITE)) POS_PRINT("W "); } while (pos < okcol + 9) { - printf("\t"); + msg_ginfo("\t"); pos += 8 - (pos % 8); } if ((f->tested & TEST_BAD_MASK)) { if ((f->tested & TEST_BAD_PROBE)) - printf("P "); + msg_ginfo("P "); if ((f->tested & TEST_BAD_READ)) - printf("R "); + msg_ginfo("R "); if ((f->tested & TEST_BAD_ERASE)) - printf("E "); + msg_ginfo("E "); if ((f->tested & TEST_BAD_WRITE)) - printf("W "); + msg_ginfo("W "); } - printf("\t %d", f->total_size); + msg_ginfo("\t %d", f->total_size); for (i = 0; i < 10 - digits(f->total_size); i++) - printf(" "); - printf("%s\n", flashbuses_to_text(f->bustype)); + msg_ginfo(" "); + msg_ginfo("%s\n", flashbuses_to_text(f->bustype)); } } #if INTERNAL_SUPPORT == 1 void print_supported_chipsets(void) { int i, j, chipsetcount = 0; const struct penable *c = chipset_enables; for (i = 0; c[i].vendor_name != NULL; i++) chipsetcount++; - printf("\nSupported chipsets (total: %d):\n\nVendor: " + msg_ginfo("\nSupported chipsets (total: %d):\n\nVendor: " "Chipset: PCI IDs:\n\n", chipsetcount); for (i = 0; c[i].vendor_name != NULL; i++) { - printf("%s", c[i].vendor_name); + msg_ginfo("%s", c[i].vendor_name); for (j = 0; j < 25 - strlen(c[i].vendor_name); j++) - printf(" "); - printf("%s", c[i].device_name); + msg_ginfo(" "); + msg_ginfo("%s", c[i].device_name); for (j = 0; j < 25 - strlen(c[i].device_name); j++) - printf(" "); - printf("%04x:%04x%s\n", c[i].vendor_id, c[i].device_id, + msg_ginfo(" "); + msg_ginfo("%04x:%04x%s\n", c[i].vendor_id, c[i].device_id, (c[i].status == OK) ? "" : " (untested)"); } } void print_supported_boards_helper(const struct board_info *b, const char *msg) { int i, j, boardcount = 0; for (i = 0; b[i].vendor != NULL; i++) boardcount++; - printf("\n%s (total: %d):\n\n", msg, boardcount); + msg_ginfo("\n%s (total: %d):\n\n", msg, boardcount); for (i = 0; b[i].vendor != NULL; i++) { - printf("%s", b[i].vendor); + msg_ginfo("%s", b[i].vendor); for (j = 0; j < 25 - strlen(b[i].vendor); j++) - printf(" "); - printf("%s", b[i].name); + msg_ginfo(" "); + msg_ginfo("%s", b[i].name); for (j = 0; j < 28 - strlen(b[i].name); j++) - printf(" "); - printf("\n"); + msg_ginfo(" "); + msg_ginfo("\n"); } } void print_supported_boards(void) { int i, j, boardcount = 0; struct board_pciid_enable *b = board_pciid_enables; for (i = 0; b[i].vendor_name != NULL; i++) boardcount++; - printf("\nSupported boards which need write-enable code (total: %d):" + msg_ginfo("\nSupported boards which need write-enable code (total: %d):" "\n\nVendor: Board: " "Required option:\n\n", boardcount); for (i = 0; b[i].vendor_name != NULL; i++) { - printf("%s", b[i].vendor_name); + msg_ginfo("%s", b[i].vendor_name); for (j = 0; j < 25 - strlen(b[i].vendor_name); j++) - printf(" "); - printf("%s", b[i].board_name); + msg_ginfo(" "); + msg_ginfo("%s", b[i].board_name); for (j = 0; j < 30 - strlen(b[i].board_name); j++) - printf(" "); + msg_ginfo(" "); if (b[i].lb_vendor != NULL) - printf("-m %s:%s\n", b[i].lb_vendor, b[i].lb_part); + msg_ginfo("-m %s:%s\n", b[i].lb_vendor, b[i].lb_part); else - printf("(none, board is autodetected)\n"); + msg_ginfo("(none, board is autodetected)\n"); } print_supported_boards_helper(boards_ok, "Supported boards which don't need write-enable code"); print_supported_boards_helper(boards_bad, "Boards which have been verified to NOT work yet"); print_supported_boards_helper(laptops_ok, "Laptops which have been verified to work"); print_supported_boards_helper(laptops_bad, "Laptops which have been verified to NOT work yet"); } #endif void print_supported(void) { print_supported_chips(); #if INTERNAL_SUPPORT == 1 print_supported_chipsets(); print_supported_boards(); #endif #if (NIC3COM_SUPPORT == 1) || (GFXNVIDIA_SUPPORT == 1) || (DRKAISER_SUPPORT == 1) || (SATASII_SUPPORT == 1) - printf("\nSupported PCI devices flashrom can use " + msg_ginfo("\nSupported PCI devices flashrom can use " "as programmer:\n\n"); #endif #if NIC3COM_SUPPORT == 1 print_supported_pcidevs(nics_3com); #endif #if GFXNVIDIA_SUPPORT == 1 print_supported_pcidevs(gfx_nvidia); #endif #if DRKAISER_SUPPORT == 1 print_supported_pcidevs(drkaiser_pcidev); #endif #if SATASII_SUPPORT == 1 print_supported_pcidevs(satas_sii); diff --git a/print_wiki.c b/print_wiki.c index 9c0143c..e5eb521 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -363,237 +363,237 @@ static int note(const char *vendor, const char *board) } return -1; } void print_supported_chipsets_wiki(void) { int i, j, enablescount = 0, color = 1; const struct penable *e; for (e = chipset_enables; e->vendor_name != NULL; e++) enablescount++; - printf("\n== Supported chipsets ==\n\nTotal amount of supported " + msg_ginfo("\n== Supported chipsets ==\n\nTotal amount of supported " "chipsets: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n| " "valign=\"top\"|\n\n%s", enablescount, chipset_th); e = chipset_enables; for (i = 0, j = 0; e[i].vendor_name != NULL; i++, j++) { /* Alternate colors if the vendor changes. */ if (i > 0 && strcmp(e[i].vendor_name, e[i - 1].vendor_name)) color = !color; - printf("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s " + msg_ginfo("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s " "|| %04x:%04x || %s\n", (color) ? "eeeeee" : "dddddd", e[i].vendor_name, e[i].device_name, e[i].vendor_id, e[i].device_id, (e[i].status == OK) ? "{{OK}}" : "?"); /* Split table in three columns. */ if (j >= (enablescount / 3 + 1)) { - printf("\n|}\n\n| valign=\"top\"|\n\n%s", chipset_th); + msg_ginfo("\n|}\n\n| valign=\"top\"|\n\n%s", chipset_th); j = 0; } } - printf("\n|}\n\n|}\n"); + msg_ginfo("\n|}\n\n|}\n"); } static void wiki_helper(const char *heading, const char *status, int cols, const struct board_info boards[]) { int i, j, k, c, boardcount = 0, color = 1, num_notes = 0; const struct board_info *b; const struct board_info_url *u = boards_url; char *notes = calloc(1, 1); char tmp[900 + 1]; for (b = boards; b->vendor != NULL; b++) boardcount++; - printf("\n'''%s'''\n\nTotal amount of boards: '''%d'''\n\n" + msg_ginfo("\n'''%s'''\n\nTotal amount of boards: '''%d'''\n\n" "{| border=\"0\" valign=\"top\"\n| valign=\"top\"|\n\n%s", heading, boardcount, board_th); for (i = 0, j = 0, b = boards; b[i].vendor != NULL; i++, j++) { /* Alternate colors if the vendor changes. */ if (i > 0 && strcmp(b[i].vendor, b[i - 1].vendor)) color = !color; k = url(b[i].vendor, b[i].name); c = note(b[i].vendor, b[i].name); - printf("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s%s %s%s ||" + msg_ginfo("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s%s %s%s ||" " {{%s}}", (color) ? "eeeeee" : "dddddd", b[i].vendor, (k != -1 && u[k].url) ? "[" : "", (k != -1 && u[k].url) ? u[k].url : "", b[i].name, (k != -1 && u[k].url) ? "]" : "", status); if (c != -1) { - printf("%d\n", num_notes + 1); - snprintf((char *)&tmp, 900, "%d %s \n", + msg_ginfo("%d\n", num_notes + 1); + snmsg_ginfo((char *)&tmp, 900, "%d %s \n", 1 + num_notes++, boards_notes[c].note); notes = strcat_realloc(notes, (char *)&tmp); } else { - printf("\n"); + msg_ginfo("\n"); } /* Split table in 'cols' columns. */ if (j >= (boardcount / cols + 1)) { - printf("\n|}\n\n| valign=\"top\"|\n\n%s", board_th); + msg_ginfo("\n|}\n\n| valign=\"top\"|\n\n%s", board_th); j = 0; } } - printf("\n|}\n\n|}\n"); + msg_ginfo("\n|}\n\n|}\n"); if (num_notes > 0) - printf("\n\n%s\n", notes); + msg_ginfo("\n\n%s\n", notes); free(notes); } static void wiki_helper2(const char *heading, int cols) { int i, j, k, boardcount = 0, color = 1; struct board_pciid_enable *b; const struct board_info_url *u = boards_url; for (b = board_pciid_enables; b->vendor_name != NULL; b++) boardcount++; - printf("\n'''%s'''\n\nTotal amount of boards: '''%d'''\n\n" + msg_ginfo("\n'''%s'''\n\nTotal amount of boards: '''%d'''\n\n" "{| border=\"0\" valign=\"top\"\n| valign=\"top\"|\n\n%s", heading, boardcount, board_th2); b = board_pciid_enables; for (i = 0, j = 0; b[i].vendor_name != NULL; i++, j++) { /* Alternate colors if the vendor changes. */ if (i > 0 && strcmp(b[i].vendor_name, b[i - 1].vendor_name)) color = !color; k = url(b[i].vendor_name, b[i].board_name); - printf("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s%s %s%s " + msg_ginfo("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s%s %s%s " "|| %s%s%s%s || {{OK}}\n", (color) ? "eeeeee" : "dddddd", b[i].vendor_name, (k != -1 && u[k].url) ? "[" : "", (k != -1 && u[k].url) ? u[k].url : "", b[i].board_name, (k != -1 && u[k].url) ? "]" : "", (b[i].lb_vendor) ? "-m " : "—", (b[i].lb_vendor) ? b[i].lb_vendor : "", (b[i].lb_vendor) ? ":" : "", (b[i].lb_vendor) ? b[i].lb_part : ""); /* Split table in three columns. */ if (j >= (boardcount / cols + 1)) { - printf("\n|}\n\n| valign=\"top\"|\n\n%s", board_th2); + msg_ginfo("\n|}\n\n| valign=\"top\"|\n\n%s", board_th2); j = 0; } } - printf("\n|}\n\n|}\n"); + msg_ginfo("\n|}\n\n|}\n"); } void print_supported_boards_wiki(void) { - printf("%s", board_intro); + msg_ginfo("%s", board_intro); wiki_helper("Known good (worked out of the box)", "OK", 3, boards_ok); wiki_helper2("Known good (with write-enable code in flashrom)", 3); wiki_helper("Not supported (yet)", "No", 3, boards_bad); - printf("%s", laptop_intro); + msg_ginfo("%s", laptop_intro); wiki_helper("Known good (worked out of the box)", "OK", 1, laptops_ok); wiki_helper("Not supported (yet)", "No", 1, laptops_bad); } void print_supported_chips_wiki(void) { int i = 0, c = 1, chipcount = 0; struct flashchip *f, *old = NULL; uint32_t t; for (f = flashchips; f->name != NULL; f++) chipcount++; - printf("\n== Supported chips ==\n\nTotal amount of supported " + msg_ginfo("\n== Supported chips ==\n\nTotal amount of supported " "chips: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n" "| valign=\"top\"|\n\n%s", chipcount, chip_th); for (f = flashchips; f->name != NULL; f++, i++) { /* Don't print "unknown XXXX SPI chip" entries. */ if (!strncmp(f->name, "unknown", 7)) continue; /* Alternate colors if the vendor changes. */ if (old != NULL && strcmp(old->vendor, f->vendor)) c = !c; t = f->tested; - printf("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s || %d " + msg_ginfo("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s || %d " "|| %s || {{%s}} || {{%s}} || {{%s}} || {{%s}}\n", (c == 1) ? "eeeeee" : "dddddd", f->vendor, f->name, f->total_size, flashbuses_to_text(f->bustype), (t & TEST_OK_PROBE) ? "OK" : (t & TEST_BAD_PROBE) ? "No" : ((c) ? "?2" : "?"), (t & TEST_OK_READ) ? "OK" : (t & TEST_BAD_READ) ? "No" : ((c) ? "?2" : "?"), (t & TEST_OK_ERASE) ? "OK" : (t & TEST_BAD_ERASE) ? "No" : ((c) ? "?2" : "?"), (t & TEST_OK_WRITE) ? "OK" : (t & TEST_BAD_WRITE) ? "No" : ((c) ? "?2" : "?")); /* Split table into three columns. */ if (i >= (chipcount / 3 + 1)) { - printf("\n|}\n\n| valign=\"top\"|\n\n%s", chip_th); + msg_ginfo("\n|}\n\n| valign=\"top\"|\n\n%s", chip_th); i = 0; } old = f; } - printf("\n|}\n\n|}\n"); + msg_ginfo("\n|}\n\n|}\n"); } void print_supported_pcidevs_wiki(struct pcidev_status *devs) { int i = 0; static int c = 0; /* Alternate colors if the vendor changes. */ c = !c; for (i = 0; devs[i].vendor_name != NULL; i++) { - printf("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s || " + msg_ginfo("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s || " "%04x:%04x || {{%s}}\n", (c) ? "eeeeee" : "dddddd", devs[i].vendor_name, devs[i].device_name, devs[i].vendor_id, devs[i].device_id, (devs[i].status == NT) ? (c) ? "?2" : "?" : "OK"); } } void print_supported_wiki(void) { time_t t = time(NULL); - printf(wiki_header, ctime(&t), flashrom_version); + msg_ginfo(wiki_header, ctime(&t), flashrom_version); print_supported_chips_wiki(); print_supported_chipsets_wiki(); print_supported_boards_wiki(); - printf("%s", programmer_section); + msg_ginfo("%s", programmer_section); #if NIC3COM_SUPPORT == 1 print_supported_pcidevs_wiki(nics_3com); #endif #if GFXNVIDIA_SUPPORT == 1 print_supported_pcidevs_wiki(gfx_nvidia); #endif #if DRKAISER_SUPPORT == 1 print_supported_pcidevs_wiki(drkaiser_pcidev); #endif #if SATASII_SUPPORT == 1 print_supported_pcidevs_wiki(satas_sii); #endif #if ATAHPT_SUPPORT == 1 print_supported_pcidevs_wiki(ata_hpt); #endif - printf("\n|}\n"); + msg_ginfo("\n|}\n"); } -- 1.6.6

2 6

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom May 2010