Nico Huber has submitted this change and it was merged. ( https://review.coreboot.org/c/flashrom/+/33669 )
Change subject: tree: Remove unused functions with no prototypes ......................................................................
tree: Remove unused functions with no prototypes
These functions are no longer used, or were never used in the first place.
generate_testpattern() - Introduced in commit eaac68bf8b, never used list_programmers() - Introduced in commit 552420b0d6, never used pci_dev_find_filter() - Prototype removed in commit 5c316f9549 erase_chip_jedec() - Usage and prototype removed in commit f52f784bb3 printlock_regspace2_blocks() - Introduced in commit ef3ac8ac17, never used spi_write_status_enable() - Usage dropped in commit fcbdbbc0d4
Change-Id: I742164670521fea65ffa3808446594848ce63cec Signed-off-by: Jacob Garber jgarber1@ualberta.ca Reviewed-on: https://review.coreboot.org/c/flashrom/+/33669 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Nico Huber nico.h@gmx.de --- M flashrom.c M internal.c M jedec.c M spi25_statusreg.c 4 files changed, 0 insertions(+), 186 deletions(-)
Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved
diff --git a/flashrom.c b/flashrom.c index 5b85c14..cb1dca6 100644 --- a/flashrom.c +++ b/flashrom.c @@ -975,142 +975,6 @@ return first_len; }
-/* This function generates various test patterns useful for testing controller - * and chip communication as well as chip behaviour. - * - * If a byte can be written multiple times, each time keeping 0-bits at 0 - * and changing 1-bits to 0 if the new value for that bit is 0, the effect - * is essentially an AND operation. That's also the reason why this function - * provides the result of AND between various patterns. - * - * Below is a list of patterns (and their block length). - * Pattern 0 is 05 15 25 35 45 55 65 75 85 95 a5 b5 c5 d5 e5 f5 (16 Bytes) - * Pattern 1 is 0a 1a 2a 3a 4a 5a 6a 7a 8a 9a aa ba ca da ea fa (16 Bytes) - * Pattern 2 is 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f (16 Bytes) - * Pattern 3 is a0 a1 a2 a3 a4 a5 a6 a7 a8 a9 aa ab ac ad ae af (16 Bytes) - * Pattern 4 is 00 10 20 30 40 50 60 70 80 90 a0 b0 c0 d0 e0 f0 (16 Bytes) - * Pattern 5 is 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f (16 Bytes) - * Pattern 6 is 00 (1 Byte) - * Pattern 7 is ff (1 Byte) - * Patterns 0-7 have a big-endian block number in the last 2 bytes of each 256 - * byte block. - * - * Pattern 8 is 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11... (256 B) - * Pattern 9 is ff fe fd fc fb fa f9 f8 f7 f6 f5 f4 f3 f2 f1 f0 ef ee... (256 B) - * Pattern 10 is 00 00 00 01 00 02 00 03 00 04... (128 kB big-endian counter) - * Pattern 11 is ff ff ff fe ff fd ff fc ff fb... (128 kB big-endian downwards) - * Pattern 12 is 00 (1 Byte) - * Pattern 13 is ff (1 Byte) - * Patterns 8-13 have no block number. - * - * Patterns 0-3 are created to detect and efficiently diagnose communication - * slips like missed bits or bytes and their repetitive nature gives good visual - * cues to the person inspecting the results. In addition, the following holds: - * AND Pattern 0/1 == Pattern 4 - * AND Pattern 2/3 == Pattern 5 - * AND Pattern 0/1/2/3 == AND Pattern 4/5 == Pattern 6 - * A weakness of pattern 0-5 is the inability to detect swaps/copies between - * any two 16-byte blocks except for the last 16-byte block in a 256-byte bloc. - * They work perfectly for detecting any swaps/aliasing of blocks >= 256 bytes. - * 0x5 and 0xa were picked because they are 0101 and 1010 binary. - * Patterns 8-9 are best for detecting swaps/aliasing of blocks < 256 bytes. - * Besides that, they provide for bit testing of the last two bytes of every - * 256 byte block which contains the block number for patterns 0-6. - * Patterns 10-11 are special purpose for detecting subblock aliasing with - * block sizes >256 bytes (some Dataflash chips etc.) - * AND Pattern 8/9 == Pattern 12 - * AND Pattern 10/11 == Pattern 12 - * Pattern 13 is the completely erased state. - * None of the patterns can detect aliasing at boundaries which are a multiple - * of 16 MBytes (but such chips do not exist anyway for Parallel/LPC/FWH/SPI). - */ -int generate_testpattern(uint8_t *buf, uint32_t size, int variant) -{ - int i; - - if (!buf) { - msg_gerr("Invalid buffer!\n"); - return 1; - } - - switch (variant) { - case 0: - for (i = 0; i < size; i++) - buf[i] = (i & 0xf) << 4 | 0x5; - break; - case 1: - for (i = 0; i < size; i++) - buf[i] = (i & 0xf) << 4 | 0xa; - break; - case 2: - for (i = 0; i < size; i++) - buf[i] = 0x50 | (i & 0xf); - break; - case 3: - for (i = 0; i < size; i++) - buf[i] = 0xa0 | (i & 0xf); - break; - case 4: - for (i = 0; i < size; i++) - buf[i] = (i & 0xf) << 4; - break; - case 5: - for (i = 0; i < size; i++) - buf[i] = i & 0xf; - break; - case 6: - memset(buf, 0x00, size); - break; - case 7: - memset(buf, 0xff, size); - break; - case 8: - for (i = 0; i < size; i++) - buf[i] = i & 0xff; - break; - case 9: - for (i = 0; i < size; i++) - buf[i] = ~(i & 0xff); - break; - case 10: - for (i = 0; i < size % 2; i++) { - buf[i * 2] = (i >> 8) & 0xff; - buf[i * 2 + 1] = i & 0xff; - } - if (size & 0x1) - buf[i * 2] = (i >> 8) & 0xff; - break; - case 11: - for (i = 0; i < size % 2; i++) { - buf[i * 2] = ~((i >> 8) & 0xff); - buf[i * 2 + 1] = ~(i & 0xff); - } - if (size & 0x1) - buf[i * 2] = ~((i >> 8) & 0xff); - break; - case 12: - memset(buf, 0x00, size); - break; - case 13: - memset(buf, 0xff, size); - break; - } - - if ((variant >= 0) && (variant <= 7)) { - /* Write block number in the last two bytes of each 256-byte - * block, big endian for easier reading of the hexdump. - * Note that this wraps around for chips larger than 2^24 bytes - * (16 MB). - */ - for (i = 0; i < size / 256; i++) { - buf[i * 256 + 254] = (i >> 8) & 0xff; - buf[i * 256 + 255] = i & 0xff; - } - } - - return 0; -} - /* Returns the number of busses commonly supported by the current programmer and flash chip where the latter * can not be completely accessed due to size/address limits of the programmer. */ unsigned int count_max_decode_exceedings(const struct flashctx *flash) @@ -2003,18 +1867,6 @@ "mail flashrom@flashrom.org, thanks!\n"); }
-/* The way to go if you want a delimited list of programmers */ -void list_programmers(const char *delim) -{ - enum programmer p; - for (p = 0; p < PROGRAMMER_INVALID; p++) { - msg_ginfo("%s", programmer_table[p].name); - if (p < PROGRAMMER_INVALID - 1) - msg_ginfo("%s", delim); - } - msg_ginfo("\n"); -} - void list_programmers_linebreak(int startcol, int cols, int paren) { const char *pname; diff --git a/internal.c b/internal.c index 2bb437c..12c0ba3 100644 --- a/internal.c +++ b/internal.c @@ -21,17 +21,6 @@ #include "programmer.h" #include "hwaccess.h"
-struct pci_dev *pci_dev_find_filter(struct pci_filter filter) -{ - struct pci_dev *temp; - - for (temp = pacc->devices; temp; temp = temp->next) - if (pci_filter_match(&filter, temp)) - return temp; - - return NULL; -} - struct pci_dev *pci_dev_find_vendorclass(uint16_t vendor, uint16_t devclass) { struct pci_dev *temp; diff --git a/jedec.c b/jedec.c index 54b7da7..ac1ea0d 100644 --- a/jedec.c +++ b/jedec.c @@ -550,14 +550,6 @@ return erase_block_jedec_common(flash, page, size, mask); }
-int erase_chip_jedec(struct flashctx *flash) -{ - unsigned int mask; - - mask = getaddrmask(flash->chip); - return erase_chip_jedec_common(flash, mask); -} - struct unlockblock { unsigned int size; unsigned int count; @@ -616,11 +608,6 @@ return 0; }
-int printlock_regspace2_blocks(const struct flashctx *flash, const struct unlockblock *blocks) -{ - return regspace2_walk_unlockblocks(flash, blocks, &printlock_regspace2_block); -} - static int printlock_regspace2_uniform(struct flashctx *flash, unsigned long block_size) { const unsigned int elems = flash->chip->total_size * 1024 / block_size; diff --git a/spi25_statusreg.c b/spi25_statusreg.c index 4cf7023..8cd5a28 100644 --- a/spi25_statusreg.c +++ b/spi25_statusreg.c @@ -22,20 +22,6 @@ #include "spi.h"
/* === Generic functions === */ -int spi_write_status_enable(struct flashctx *flash) -{ - static const unsigned char cmd[JEDEC_EWSR_OUTSIZE] = { JEDEC_EWSR }; - int result; - - /* Send EWSR (Enable Write Status Register). */ - result = spi_send_command(flash, sizeof(cmd), JEDEC_EWSR_INSIZE, cmd, NULL); - - if (result) - msg_cerr("%s failed\n", __func__); - - return result; -} - static int spi_write_status_register_flag(struct flashctx *flash, int status, const unsigned char enable_opcode) { int result;