[flashrom-gerrit] [S] Change in flashrom[main]: flashchips: Add support for MXIC MX25L12850F

[Anastasia Klimchuk (Code Review)]

Anastasia Klimchuk has submitted this change. ( https://review.coreboot.org/c/flashrom/+/81350?usp=email )

Change subject: flashchips: Add support for MXIC MX25L12850F
......................................................................

flashchips: Add support for MXIC MX25L12850F

The MX25L12850F has been tested by ch341a programmer : read, write,
erase and wp.

We have tested --wp-enable, --wp-disable, --wp-list and --wp-range
commands for write-protect feature.

MX25L12850F datasheet is available at the following URL:
https://www.macronix.com/Lists/Datasheet/Attachments/8632/MX25L12850F,%203V,...

Change-Id: I71ac70d273904f94d015401f9d8df587084efad0
Signed-off-by: DanielZhang 
Reviewed-on: https://review.coreboot.org/c/flashrom/+/81350
Reviewed-by: Alexander Goncharov 
Tested-by: build bot (Jenkins) 
Reviewed-by: Anastasia Klimchuk 
---
M flashchips.c
M include/flashchips.h
2 files changed, 47 insertions(+), 1 deletion(-)

Approvals:
  Alexander Goncharov: Looks good to me, but someone else must approve
  build bot (Jenkins): Verified
  Anastasia Klimchuk: Looks good to me, approved

diff --git a/flashchips.c b/flashchips.c
index 74953d1..7a40f07 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -9045,6 +9045,52 @@

{
    	.vendor		= "Macronix",
+		.name		= "MX25L12850F",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= MACRONIX_ID,
+		.model_id	= MACRONIX_MX25L12805D,
+		.total_size	= 16384,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_CFGR,
+		.tested		= TEST_OK_PREWB,
+		.probe		= PROBE_SPI_RDID,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 4096} },
+				.block_erase = SPI_BLOCK_ERASE_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 512} },
+				.block_erase = SPI_BLOCK_ERASE_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 256} },
+				.block_erase = SPI_BLOCK_ERASE_D8,
+			}, {
+				.eraseblocks = { {16 * 1024 * 1024, 1} },
+				.block_erase = SPI_BLOCK_ERASE_60,
+			}, {
+				.eraseblocks = { {16 * 1024 * 1024, 1} },
+				.block_erase = SPI_BLOCK_ERASE_C7,
+			}
+		},
+		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* bit6 is quad enable */
+		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
+		.write		= SPI_CHIP_WRITE256,
+		.read		= SPI_CHIP_READ, /* Fast read (0x0B) supported */
+		.voltage	= {2700, 3600},
+		.reg_bits	=
+		{
+			.srp    = {STATUS1, 7, RW},
+			.bp     = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW},  {STATUS1, 5, RW}},
+			.tb     = {CONFIG, 3, OTP}
+		},
+
+		.decode_range	= DECODE_RANGE_SPI25,
+	},
+
+	{
+		.vendor		= "Macronix",
    	.name		= "MX25L1605",
    	.bustype	= BUS_SPI,
    	.manufacture_id	= MACRONIX_ID,
diff --git a/include/flashchips.h b/include/flashchips.h
index 932e458..103e6ea 100644
--- a/include/flashchips.h
+++ b/include/flashchips.h
@@ -516,7 +516,7 @@
 #define MACRONIX_MX25L1605	0x2015	/* MX25L1605 (64k 0x20); MX25V16066 (4k 0x20, 32k 0x52, 64k 0xD8); MX25L1605A/MX25L1606E/MX25L1608E (4k 0x20, 64k 0x52); MX25L1605D/MX25L1608D/MX25L1673E (4k 0x20) */
 #define MACRONIX_MX25L3205	0x2016	/* MX25L3205, MX25L3205A (64k 0x20); MX25L3205D/MX25L3208D (4k 0x20); MX25L3206E/MX25L3208E (4k 0x20, 64k 0x52); MX25L3233F/MX25L3273E (4k 0x20, 32k 0x52) */
 #define MACRONIX_MX25L6405	0x2017	/* MX25L6405, MX25L6405D (64k 0x20); MX25L6406E/MX25L6408E (4k 0x20); MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E (4k 0x20, 32k 0x52) */
-#define MACRONIX_MX25L12805D	0x2018	/* MX25L12805D (no 32k); MX25L12865E, MX25L12835F, MX25L12845E, MX25L12873F, MX25L12833F (32k 0x52) */
+#define MACRONIX_MX25L12805D	0x2018	/* MX25L12805D (no 32k); MX25L12865E, MX25L12835F, MX25L12845E, MX25L12873F, MX25L12833F, MX25L12850F (32k 0x52) */
 #define MACRONIX_MX25L25635F	0x2019	/* Same as MX25L25639F, but the latter seems to not support REMS */
 #define MACRONIX_MX25L1635D	0x2415
 #define MACRONIX_MX25L1635E	0x2515	/* MX25L1635{E} */