[flashrom-gerrit] [M] Change in flashrom[master]: rayer_spi.c: Move param parse logic into own func

[Edward O'Callaghan (Code Review)]

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/68230 )

Change subject: rayer_spi.c: Move param parse logic into own func
......................................................................

rayer_spi.c: Move param parse logic into own func

Deconvolve programmer parameter parse logic out of main
'rayer_spi_init()' entry-point function control flow.

Change-Id: I287aa2e5d94e872553d08c0750f8dc6d60b9caff
Signed-off-by: Edward O'Callaghan 
---
M rayer_spi.c
1 file changed, 57 insertions(+), 29 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/30/68230/1

diff --git a/rayer_spi.c b/rayer_spi.c
index cd7a066..8632f8c 100644
--- a/rayer_spi.c
+++ b/rayer_spi.c
@@ -235,20 +235,18 @@
    .half_period	= 0,
 };

-static int rayer_spi_init(const struct programmer_cfg *cfg)
+static int get_params(const struct programmer_cfg *cfg, uint16_t *lpt_iobase, char **prog_type)
 {
-	const struct rayer_programmer *prog = rayer_spi_types;
-	char *arg = NULL;
-	struct rayer_pinout *pinout = NULL;
-	uint16_t lpt_iobase;
-	uint8_t lpt_outbyte;
+	/* Pick a default value for the I/O base. */
+	*lpt_iobase = 0x378;
+	/* no programmer type specified. */
+	*prog_type = NULL;

/* Non-default port requested? */
-	arg = extract_programmer_param_str(cfg, "iobase");
+	char *arg = extract_programmer_param_str(cfg, "iobase");
    if (arg) {
    	char *endptr = NULL;
-		unsigned long tmp;
-		tmp = strtoul(arg, &endptr, 0);
+		unsigned long tmp = strtoul(arg, &endptr, 0);
    	/* Port 0, port >0x10000, unaligned ports and garbage strings
    	 * are rejected.
    	 */
@@ -262,35 +260,52 @@
    			 "given was invalid.\nIt must be a multiple of "
    			 "0x4 and lie between 0x100 and 0xfffc.\n");
    		free(arg);
-			return 1;
+			return -1;
    	} else {
-			lpt_iobase = (uint16_t)tmp;
+			*lpt_iobase = (uint16_t)tmp;
    		msg_pinfo("Non-default I/O base requested. This will "
    			  "not change the hardware settings.\n");
    	}
-	} else {
-		/* Pick a default value for the I/O base. */
-		lpt_iobase = 0x378;
+		free(arg);
    }
-	free(arg);
+
+	arg = extract_programmer_param_str(cfg, "type");
+	if (arg) {
+		*prog_type = strdup(arg);
+		free(arg);
+	}
+
+	return 0;
+}
+
+static int rayer_spi_init(const struct programmer_cfg *cfg)
+{
+	const struct rayer_programmer *prog = rayer_spi_types;
+	struct rayer_pinout *pinout = NULL;
+	uint16_t lpt_iobase;
+	uint8_t lpt_outbyte;
+	char *prog_type;
+
+	if (get_params(cfg, &lpt_iobase, &prog_type) < 0)
+		return 1;
+
+	if (prog_type) {
+		for (; prog->type != NULL; prog++) {
+			if (strcasecmp(prog_type, prog->type) == 0) {
+				break;
+			}
+		}
+		free(prog_type);
+
+		if (prog->type == NULL) {
+			msg_perr("Error: Invalid device type specified.\n");
+			return 1;
+		}
+	}

msg_pdbg("Using address 0x%x as I/O base for parallel port access.\n",
    	 lpt_iobase);

-	arg = extract_programmer_param_str(cfg, "type");
-	if (arg) {
-		for (; prog->type != NULL; prog++) {
-			if (strcasecmp(arg, prog->type) == 0) {
-				break;
-			}
-		}
-		if (prog->type == NULL) {
-			msg_perr("Error: Invalid device type specified.\n");
-			free(arg);
-			return 1;
-		}
-		free(arg);
-	}
    msg_pinfo("Using %s pinout.\n", prog->description);
    pinout = (struct rayer_pinout *)prog->dev_data;