[flashrom-gerrit] Change in flashrom[master]: raiden_debug_spi: add param for a custom reset setup

[Mary Ruthven (Code Review)]

Hello Brian Nemec, build bot (Jenkins), Brian Nemec, Edward O'Callaghan,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/flashrom/+/43527

to look at the new patch set (#5).

Change subject: raiden_debug_spi: add param for a custom reset setup
......................................................................

raiden_debug_spi: add param for a custom reset setup

GSC firmware asserts EC_RST_L before programming the AP with
raiden_debug:target=AP.Some Chromium devices don't power the AP flash
 when the EC is in reset. These boards can't flash the AP with the
current CCD behavior. This change adds a custom_rst raiden_debug param
to tell Cr50 not to assert EC_RST_L or touch any reset signals while
flashing the AP. Users will need to configure the reset signals before
running the flashrom command.

BUG=b:154885210
BRANCH=none
TEST=manual

flashrom -p raiden_debug:target=EC -r ec.bin

flashrom -p raiden_debug:target=AP -r ap.bin

flashrom -p raiden_debug:target=AP,custom_rst=true -r ap.bin

flashrom -p raiden_debug:target=AP,custom_rst=inv -r ap.bin

flashrom -p raiden_debug -r base.bin

Signed-off-by: Mary Ruthven 
Change-Id: I2da26469120c5304bc129b5578fcb7ca805fc1d1
---
M raiden_debug_spi.c
1 file changed, 30 insertions(+), 12 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/27/43527/5