Nico Huber has uploaded this change for review. ( https://review.coreboot.org/22387
Change subject: spi4ba: Drop now obsolete, redundant functions ......................................................................
spi4ba: Drop now obsolete, redundant functions
Change-Id: I1d04448fd1acbfc37b8e17288f497a4292dfd6d6 Signed-off-by: Nico Huber nico.h@gmx.de --- M spi4ba.c 1 file changed, 0 insertions(+), 651 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/87/22387/1
diff --git a/spi4ba.c b/spi4ba.c index 902f073..8cce3c6 100644 --- a/spi4ba.c +++ b/spi4ba.c @@ -134,246 +134,6 @@ return result; }
-/* Program one flash byte from 4-bytes addressing mode */ -int spi_byte_program_4ba(struct flashctx *flash, unsigned int addr, uint8_t databyte) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE + 1, - .writearr = (const unsigned char[]){ - JEDEC_BYTE_PROGRAM, - (addr >> 24) & 0xff, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr & 0xff), - databyte - }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - msg_trace("-> %s (0x%08X)\n", __func__, addr); - - result = spi_send_multicommand(flash, cmds); - if (result) - msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr); - return result; -} - -/* Program flash bytes from 4-bytes addressing mode */ -int spi_nbyte_program_4ba(struct flashctx *flash, unsigned int addr, const uint8_t *bytes, unsigned int len) -{ - int result; - unsigned char cmd[(JEDEC_BYTE_PROGRAM_OUTSIZE + 1) - 1 + 256] = { - JEDEC_BYTE_PROGRAM, - (addr >> 24) & 0xff, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr >> 0) & 0xff - }; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = (JEDEC_BYTE_PROGRAM_OUTSIZE + 1) - 1 + len, - .writearr = cmd, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1); - - if (!len) { - msg_cerr("%s called for zero-length write\n", __func__); - return 1; - } - if (len > 256) { - msg_cerr("%s called for too long a write\n", __func__); - return 1; - } - - memcpy(&cmd[(JEDEC_BYTE_PROGRAM_OUTSIZE + 1) - 1], bytes, len); - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution at address 0x%x\n", - __func__, addr); - } - return result; -} - -/* Read flash bytes from 4-bytes addressing mode */ -int spi_nbyte_read_4ba(struct flashctx *flash, unsigned int addr, uint8_t *bytes, unsigned int len) -{ - const unsigned char cmd[JEDEC_READ_OUTSIZE + 1] = { - JEDEC_READ, - (addr >> 24) & 0xff, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr >> 0) & 0xff - }; - - msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1); - - /* Send Read */ - return spi_send_command(flash, sizeof(cmd), len, cmd, bytes); -} - -/* Erase one sector of flash from 4-bytes addressing mode */ -int spi_block_erase_20_4ba(struct flashctx *flash, unsigned int addr, unsigned int blocklen) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_SE_OUTSIZE + 1, - .writearr = (const unsigned char[]){ - JEDEC_SE, - (addr >> 24) & 0xff, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr & 0xff) - }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1); - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution at address 0x%x\n", - __func__, addr); - return result; - } - /* Wait until the Write-In-Progress bit is cleared. - * This usually takes 15-800 ms, so wait in 10 ms steps. - */ - while (spi_read_status_register(flash) & SPI_SR_WIP) - programmer_delay(10 * 1000); - /* FIXME: Check the status register for errors. */ - return 0; -} - -/* Erase one sector of flash from 4-bytes addressing mode */ -int spi_block_erase_52_4ba(struct flashctx *flash, unsigned int addr, unsigned int blocklen) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BE_52_OUTSIZE + 1, - .writearr = (const unsigned char[]){ - JEDEC_BE_52, - (addr >> 24) & 0xff, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr & 0xff) - }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1); - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution at address 0x%x\n", - __func__, addr); - return result; - } - /* Wait until the Write-In-Progress bit is cleared. - * This usually takes 100-4000 ms, so wait in 100 ms steps. - */ - while (spi_read_status_register(flash) & SPI_SR_WIP) - programmer_delay(100 * 1000); - /* FIXME: Check the status register for errors. */ - return 0; -} - -/* Erase one sector of flash from 4-bytes addressing mode */ -int spi_block_erase_d8_4ba(struct flashctx *flash, unsigned int addr, - unsigned int blocklen) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BE_D8_OUTSIZE + 1, - .writearr = (const unsigned char[]){ - JEDEC_BE_D8, - (addr >> 24) & 0xff, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr & 0xff) - }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1); - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution at address 0x%x\n", - __func__, addr); - return result; - } - /* Wait until the Write-In-Progress bit is cleared. - * This usually takes 100-4000 ms, so wait in 100 ms steps. - */ - while (spi_read_status_register(flash) & SPI_SR_WIP) - programmer_delay(100 * 1000); - /* FIXME: Check the status register for errors. */ - return 0; -} - /* Write Extended Address Register value */ int spi_write_extended_address_register(struct flashctx *flash, uint8_t regdata) { @@ -407,417 +167,6 @@ return result; } return 0; -} - -/* Assign required value of Extended Address Register. This function - keeps last value of the register and writes the register if the - value has to be changed only. */ -int set_extended_address_register(struct flashctx *flash, uint8_t data) -{ - static uint8_t ext_addr_reg_state; /* memory for last register state */ - static int ext_addr_reg_state_valid = 0; - int result; - - if (ext_addr_reg_state_valid == 0 || data != ext_addr_reg_state) { - result = spi_write_extended_address_register(flash, data); - if (result) { - ext_addr_reg_state_valid = 0; - return result; - } - ext_addr_reg_state = data; - ext_addr_reg_state_valid = 1; - } - return 0; -} - -/* Program one flash byte using Extended Address Register - from 3-bytes addressing mode */ -int spi_byte_program_4ba_ereg(struct flashctx *flash, unsigned int addr, - uint8_t databyte) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE, - .writearr = (const unsigned char[]){ - JEDEC_BYTE_PROGRAM, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr & 0xff), - databyte - }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - msg_trace("-> %s (0x%08X)\n", __func__, addr); - - result = set_extended_address_register(flash, (addr >> 24) & 0xff); - if (result) - return result; - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution at address 0x%x\n", - __func__, addr); - } - return result; -} - -/* Program flash bytes using Extended Address Register - from 3-bytes addressing mode */ -int spi_nbyte_program_4ba_ereg(struct flashctx *flash, unsigned int addr, - const uint8_t *bytes, unsigned int len) -{ - int result; - unsigned char cmd[JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + 256] = { - JEDEC_BYTE_PROGRAM, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr >> 0) & 0xff - }; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + len, - .writearr = cmd, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1); - - if (!len) { - msg_cerr("%s called for zero-length write\n", __func__); - return 1; - } - if (len > 256) { - msg_cerr("%s called for too long a write\n", __func__); - return 1; - } - - memcpy(&cmd[JEDEC_BYTE_PROGRAM_OUTSIZE - 1], bytes, len); - - result = set_extended_address_register(flash, (addr >> 24) & 0xff); - if (result) - return result; - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution at address 0x%x\n", - __func__, addr); - } - return result; -} - -/* Read flash bytes using Extended Address Register - from 3-bytes addressing mode */ -int spi_nbyte_read_4ba_ereg(struct flashctx *flash, unsigned int addr, - uint8_t *bytes, unsigned int len) -{ - int result; - const unsigned char cmd[JEDEC_READ_OUTSIZE] = { - JEDEC_READ, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr >> 0) & 0xff - }; - - msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1); - - result = set_extended_address_register(flash, (addr >> 24) & 0xff); - if (result) - return result; - - /* Send Read */ - return spi_send_command(flash, sizeof(cmd), len, cmd, bytes); -} - -/* Erases 4 KB of flash using Extended Address Register - from 3-bytes addressing mode */ -int spi_block_erase_20_4ba_ereg(struct flashctx *flash, unsigned int addr, - unsigned int blocklen) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_SE_OUTSIZE, - .writearr = (const unsigned char[]){ - JEDEC_SE, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr & 0xff) - }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1); - - result = set_extended_address_register(flash, (addr >> 24) & 0xff); - if (result) - return result; - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution at address 0x%x\n", - __func__, addr); - return result; - } - /* Wait until the Write-In-Progress bit is cleared. - * This usually takes 15-800 ms, so wait in 10 ms steps. - */ - while (spi_read_status_register(flash) & SPI_SR_WIP) - programmer_delay(10 * 1000); - /* FIXME: Check the status register for errors. */ - return 0; -} - -/* Erases 32 KB of flash using Extended Address Register - from 3-bytes addressing mode */ -int spi_block_erase_52_4ba_ereg(struct flashctx *flash, unsigned int addr, - unsigned int blocklen) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BE_52_OUTSIZE, - .writearr = (const unsigned char[]){ - JEDEC_BE_52, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr & 0xff) - }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1); - - result = set_extended_address_register(flash, (addr >> 24) & 0xff); - if (result) - return result; - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution at address 0x%x\n", - __func__, addr); - return result; - } - /* Wait until the Write-In-Progress bit is cleared. - * This usually takes 100-4000 ms, so wait in 100 ms steps. - */ - while (spi_read_status_register(flash) & SPI_SR_WIP) - programmer_delay(100 * 1000); - /* FIXME: Check the status register for errors. */ - return 0; -} - -/* Erases 64 KB of flash using Extended Address Register - from 3-bytes addressing mode */ -int spi_block_erase_d8_4ba_ereg(struct flashctx *flash, unsigned int addr, - unsigned int blocklen) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BE_D8_OUTSIZE, - .writearr = (const unsigned char[]){ - JEDEC_BE_D8, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr & 0xff) - }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1); - - result = set_extended_address_register(flash, (addr >> 24) & 0xff); - if (result) - return result; - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution at address 0x%x\n", - __func__, addr); - return result; - } - /* Wait until the Write-In-Progress bit is cleared. - * This usually takes 100-4000 ms, so wait in 100 ms steps. - */ - while (spi_read_status_register(flash) & SPI_SR_WIP) - programmer_delay(100 * 1000); - /* FIXME: Check the status register for errors. */ - return 0; -} - -/* Program one flash byte with 4-bytes address from ANY mode (3-bytes or 4-bytes) - JEDEC_BYTE_PROGRAM_4BA (12h) instruction is new for 4-bytes addressing flash chips. - The presence of this instruction for an exact chip should be checked - by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */ -int spi_byte_program_4ba_direct(struct flashctx *flash, unsigned int addr, - uint8_t databyte) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BYTE_PROGRAM_4BA_OUTSIZE, - .writearr = (const unsigned char[]){ - JEDEC_BYTE_PROGRAM_4BA, - (addr >> 24) & 0xff, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr & 0xff), - databyte - }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - msg_trace("-> %s (0x%08X)\n", __func__, addr); - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution at address 0x%x\n", - __func__, addr); - } - return result; -} - -/* Program flash bytes with 4-bytes address from ANY mode (3-bytes or 4-bytes) - JEDEC_BYTE_PROGRAM_4BA (12h) instruction is new for 4-bytes addressing flash chips. - The presence of this instruction for an exact chip should be checked - by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */ -int spi_nbyte_program_4ba_direct(struct flashctx *flash, unsigned int addr, - const uint8_t *bytes, unsigned int len) -{ - int result; - unsigned char cmd[JEDEC_BYTE_PROGRAM_4BA_OUTSIZE - 1 + 256] = { - JEDEC_BYTE_PROGRAM_4BA, - (addr >> 24) & 0xff, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr >> 0) & 0xff - }; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BYTE_PROGRAM_4BA_OUTSIZE - 1 + len, - .writearr = cmd, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1); - - if (!len) { - msg_cerr("%s called for zero-length write\n", __func__); - return 1; - } - if (len > 256) { - msg_cerr("%s called for too long a write\n", __func__); - return 1; - } - - memcpy(&cmd[JEDEC_BYTE_PROGRAM_4BA_OUTSIZE - 1], bytes, len); - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution at address 0x%x\n", - __func__, addr); - } - return result; -} - -/* Read flash bytes with 4-bytes address from ANY mode (3-bytes or 4-bytes) - JEDEC_READ_4BA (13h) instruction is new for 4-bytes addressing flash chips. - The presence of this instruction for an exact chip should be checked - by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */ -int spi_nbyte_read_4ba_direct(struct flashctx *flash, unsigned int addr, - uint8_t *bytes, unsigned int len) -{ - const unsigned char cmd[JEDEC_READ_4BA_OUTSIZE] = { - JEDEC_READ_4BA, - (addr >> 24) & 0xff, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr >> 0) & 0xff - }; - - msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1); - - /* Send Read */ - return spi_send_command(flash, sizeof(cmd), len, cmd, bytes); }
/* Erase 4 KB of flash with 4-bytes address from ANY mode (3-bytes or 4-bytes)