Nico Huber has submitted this change. ( https://review.coreboot.org/c/flashrom/+/36426 )
Change subject: sb600spi.c: Generalise determin_generation() after Yangtze ......................................................................
sb600spi.c: Generalise determin_generation() after Yangtze
Drop dead USE_YANGTZE_HEURISTICS code and add Promontory support.
Change-Id: I5aa7370025f5c1af56c6cb96194b6f3007d0ede7 Signed-off-by: Edward O'Callaghan quasisec@chromium.org Reviewed-on: https://review.coreboot.org/c/flashrom/+/36426 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Nico Huber nico.h@gmx.de --- M sb600spi.c 1 file changed, 9 insertions(+), 21 deletions(-)
Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved
diff --git a/sb600spi.c b/sb600spi.c index 050d210..cb5c4a4 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -49,6 +49,7 @@ CHIPSET_HUDSON234, CHIPSET_BOLTON, CHIPSET_YANGTZE, + CHIPSET_PROMONTORY, }; static enum amd_chipset amd_gen = CHIPSET_AMD_UNKNOWN;
@@ -118,22 +119,6 @@ } else if (dev->device_id == 0x780e) { /* The PCI ID of the LPC bridge doesn't change between Hudson-2/3/4 and Yangtze (Kabini/Temash) * although they use different SPI interfaces. */ -#ifdef USE_YANGTZE_HEURISTICS - /* This heuristic accesses the SPI interface MMIO BAR at locations beyond those supported by - * Hudson in the hope of getting 0xff readback on older chipsets and non-0xff readback on - * Yangtze (and newer, compatible chipsets). */ - int i; - msg_pdbg("Checking for AMD Yangtze (Kabini/Temash) or later... "); - for (i = 0x20; i <= 0x4f; i++) { - if (mmio_readb(sb600_spibar + i) != 0xff) { - amd_gen = CHIPSET_YANGTZE; - msg_pdbg("found.\n"); - return 0; - } - } - msg_pdbg("not found. Assuming Hudson.\n"); - amd_gen = CHIPSET_HUDSON234; -#else int rev = find_smbus_dev_rev(0x1022, 0x780B); if (rev < 0) return -1; @@ -158,6 +143,9 @@ if (rev == 0x4a) { amd_gen = CHIPSET_YANGTZE; msg_pdbg("Yangtze detected.\n"); + } else if (rev == 0x4b) { + amd_gen = CHIPSET_PROMONTORY; + msg_pdbg("Promontory detected.\n"); } else { msg_pwarn("FCH device found but SMBus revision 0x%02x does not match known values.\n" "Please report this to flashrom@flashrom.org and include this log and\n" @@ -165,7 +153,6 @@ }
-#endif } else msg_pwarn("%s: Unknown LPC device %" PRIx16 ":%" PRIx16 ".\n" "Please report this to flashrom@flashrom.org and include this log and\n" @@ -595,7 +582,7 @@ msg_pdbg("SpiRomEnable=%i", (tmp >> 1) & 0x1); if (amd_gen == CHIPSET_SB7XX) msg_pdbg(", AltSpiCSEnable=%i, AbortEnable=%i", tmp & 0x1, (tmp >> 2) & 0x1); - else if (amd_gen == CHIPSET_YANGTZE) + else if (amd_gen >= CHIPSET_YANGTZE) msg_pdbg(", RouteTpm2Sp=%i", (tmp >> 3) & 0x1);
tmp = pci_read_byte(dev, 0xba); @@ -631,13 +618,13 @@ */ tmp = mmio_readl(sb600_spibar + 0x00); msg_pdbg("(0x%08" PRIx32 ") SpiArbEnable=%i", tmp, (tmp >> 19) & 0x1); - if (amd_gen == CHIPSET_YANGTZE) + if (amd_gen >= CHIPSET_YANGTZE) msg_pdbg(", IllegalAccess=%i", (tmp >> 21) & 0x1);
msg_pdbg(", SpiAccessMacRomEn=%i, SpiHostAccessRomEn=%i, ArbWaitCount=%i", (tmp >> 22) & 0x1, (tmp >> 23) & 0x1, (tmp >> 24) & 0x7);
- if (amd_gen != CHIPSET_YANGTZE) + if (amd_gen < CHIPSET_YANGTZE) msg_pdbg(", SpiBridgeDisable=%i", (tmp >> 27) & 0x1);
switch (amd_gen) { @@ -647,6 +634,7 @@ case CHIPSET_SB89XX: case CHIPSET_HUDSON234: case CHIPSET_YANGTZE: + case CHIPSET_PROMONTORY: msg_pdbg(", SpiBusy=%i", (tmp >> 31) & 0x1); default: break; } @@ -710,7 +698,7 @@ return ERROR_FATAL;
/* Starting with Yangtze the SPI controller got a different interface with a much bigger buffer. */ - if (amd_gen != CHIPSET_YANGTZE) + if (amd_gen < CHIPSET_YANGTZE) register_spi_master(&spi_master_sb600); else register_spi_master(&spi_master_yangtze);