[flashrom-gerrit] [M] Change in flashrom[master]: Added support for Macronix MX25V1635F

[Gabriel Tremblay (Code Review)]

Gabriel Tremblay has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/70213 )

Change subject: Added support for Macronix MX25V1635F
......................................................................

Added support for Macronix MX25V1635F

Implentation was tested with a chip I had on hand and a RaspberryPI
using the built-in SPI implementation and GPIO Pins

Signed-off-by: Gabriel Tremblay 
Change-Id: Id688f66ecbbb4ad2ea2f413db90974d917470b32
---
M flashchips.c
M include/flashchips.h
2 files changed, 52 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/13/70213/1

diff --git a/flashchips.c b/flashchips.c
index 6f65389..b3fa85e 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -9576,6 +9576,44 @@

{
    	.vendor		= "Macronix",
+		.name		= "MX25V1635F",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= MACRONIX_ID,
+		.model_id	= MACRONIX_MX25V1635F,
+		.total_size	= 16384,
+		.page_size	= 256,
+		/* MX25V1635F supports SFDP */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.probe		= PROBE_SPI_RDID,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 4096} },
+				.block_erase = SPI_BLOCK_ERASE_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 512} },
+				.block_erase = SPI_BLOCK_ERASE_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 256} },
+				.block_erase = SPI_BLOCK_ERASE_D8,
+			}, {
+				.eraseblocks = { {16 * 1024 * 1024, 1} },
+				.block_erase = SPI_BLOCK_ERASE_60,
+			}, {
+				.eraseblocks = { {16 * 1024 * 1024, 1} },
+				.block_erase = SPI_BLOCK_ERASE_C7,
+			},
+		},
+		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, 
+		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
+		.write		= SPI_CHIP_WRITE256,
+		.read		= SPI_CHIP_READ, /* Fast read (0x0B) supported, MX25V1635F supports dual I/O */
+		.voltage	= {2700, 3600}, /* 2.35-3.6V for MX25V1635F */
+	},
+
+	{
+		.vendor		= "Macronix",
    	.name		= "MX25U12835F",
    	.bustype	= BUS_SPI,
    	.manufacture_id	= MACRONIX_ID,
diff --git a/include/flashchips.h b/include/flashchips.h
index 5df42dc..42d9b07 100644
--- a/include/flashchips.h
+++ b/include/flashchips.h
@@ -524,7 +524,7 @@

#define MACRONIX_MX25R3235F	0x2816
 #define MACRONIX_MX25R6435F	0x2817
-
+#define MACRONIX_MX25V1635F	0x2315
 #define MACRONIX_MX29F001B	0x19
 #define MACRONIX_MX29F001T	0x18
 #define MACRONIX_MX29F002B	0x34	/* Same as MX29F002NB; N has reset pin n/c. */