[flashrom-gerrit] Change in flashrom[master]: rayer_spi.c: Remove forward-declarations

[Edward O'Callaghan (Code Review)]

Edward O'Callaghan has submitted this change. ( https://review.coreboot.org/c/flashrom/+/51555 )

Change subject: rayer_spi.c: Remove forward-declarations
......................................................................

rayer_spi.c: Remove forward-declarations

Reorder functions to avoid forward-declarations.
This was aimed to be done for all spi masters in the earlier patch
however this file was missed.

BUG=b:140394053
TEST=builds

Change-Id: I0e3c82967a169d6a2512ffa17d1e0c78eafb2797
Signed-off-by: Anastasia Klimchuk 
Reviewed-on: https://review.coreboot.org/c/flashrom/+/51555
Reviewed-by: Angel Pons 
Reviewed-by: Edward O'Callaghan 
Tested-by: build bot (Jenkins) 
---
M rayer_spi.c
1 file changed, 45 insertions(+), 54 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Angel Pons: Looks good to me, approved
  Edward O'Callaghan: Looks good to me, approved

diff --git a/rayer_spi.c b/rayer_spi.c
index 8e869e6..cde008f 100644
--- a/rayer_spi.c
+++ b/rayer_spi.c
@@ -31,6 +31,11 @@
 #include "programmer.h"
 #include "hwaccess.h"

+static uint16_t lpt_iobase;
+
+/* Cached value of last byte sent. */
+static uint8_t lpt_outbyte;
+
 /* We have two sets of pins, out and in. The numbers for both sets are
  * independent and are bitshift values, not real pin numbers.
  * Default settings are for the RayeR hardware.
@@ -59,8 +64,20 @@
    .miso_bit = 6,
 };

-static void dlc5_preinit(const void *);
-static int dlc5_shutdown(void *);
+static void dlc5_preinit(const void *data) {
+	msg_pdbg("dlc5_preinit\n");
+	/* Assert pin 6 to receive MISO. */
+	lpt_outbyte |= (1<<4);
+	OUTB(lpt_outbyte, lpt_iobase);
+}
+
+static int dlc5_shutdown(void *data) {
+	msg_pdbg("dlc5_shutdown\n");
+	/* De-assert pin 6 to force MISO low. */
+	lpt_outbyte &= ~(1<<4);
+	OUTB(lpt_outbyte, lpt_iobase);
+	return 0;
+}

static const struct rayer_pinout xilinx_dlc5 = {
    .cs_bit = 2,
@@ -71,8 +88,18 @@
    .shutdown = dlc5_shutdown,
 };

-static void byteblaster_preinit(const void *);
-static int byteblaster_shutdown(void *);
+static void byteblaster_preinit(const void *data){
+	msg_pdbg("byteblaster_preinit\n");
+	/* Assert #EN signal. */
+	OUTB(2, lpt_iobase + 2 );
+}
+
+static int byteblaster_shutdown(void *data){
+	msg_pdbg("byteblaster_shutdown\n");
+	/* De-Assert #EN signal. */
+	OUTB(0, lpt_iobase + 2 );
+	return 0;
+}

static const struct rayer_pinout altera_byteblastermv = {
    .cs_bit = 1,
@@ -83,8 +110,20 @@
    .shutdown = byteblaster_shutdown,
 };

-static void stk200_preinit(const void *);
-static int stk200_shutdown(void *);
+static void stk200_preinit(const void *data) {
+	msg_pdbg("stk200_init\n");
+	/* Assert #EN signals, set LED signal. */
+	lpt_outbyte = (1 << 6) ;
+	OUTB(lpt_outbyte, lpt_iobase);
+}
+
+static int stk200_shutdown(void *data) {
+	msg_pdbg("stk200_shutdown\n");
+	/* Assert #EN signals, clear LED signal. */
+	lpt_outbyte = (1 << 2) | (1 << 3);
+	OUTB(lpt_outbyte, lpt_iobase);
+	return 0;
+}

static const struct rayer_pinout atmel_stk200 = {
    .cs_bit = 7,
@@ -121,11 +160,6 @@

static const struct rayer_pinout *pinout = NULL;

-static uint16_t lpt_iobase;
-
-/* Cached value of last byte sent. */
-static uint8_t lpt_outbyte;
-
 static void rayer_bitbang_set_cs(int val)
 {
    lpt_outbyte &= ~(1 << pinout->cs_bit);
@@ -237,49 +271,6 @@
    return 0;
 }

-static void byteblaster_preinit(const void *data){
-	msg_pdbg("byteblaster_preinit\n");
-	/* Assert #EN signal. */
-	OUTB(2, lpt_iobase + 2 );
-}
-
-static int byteblaster_shutdown(void *data){
-	msg_pdbg("byteblaster_shutdown\n");
-	/* De-Assert #EN signal. */
-	OUTB(0, lpt_iobase + 2 );
-	return 0;
-}
-
-static void stk200_preinit(const void *data) {
-	msg_pdbg("stk200_init\n");
-	/* Assert #EN signals, set LED signal. */
-	lpt_outbyte = (1 << 6) ;
-	OUTB(lpt_outbyte, lpt_iobase);
-}
-
-static int stk200_shutdown(void *data) {
-	msg_pdbg("stk200_shutdown\n");
-	/* Assert #EN signals, clear LED signal. */
-	lpt_outbyte = (1 << 2) | (1 << 3);
-	OUTB(lpt_outbyte, lpt_iobase);
-	return 0;
-}
-
-static void dlc5_preinit(const void *data) {
-	msg_pdbg("dlc5_preinit\n");
-	/* Assert pin 6 to receive MISO. */
-	lpt_outbyte |= (1<<4);
-	OUTB(lpt_outbyte, lpt_iobase);
-}
-
-static int dlc5_shutdown(void *data) {
-	msg_pdbg("dlc5_shutdown\n");
-	/* De-assert pin 6 to force MISO low. */
-	lpt_outbyte &= ~(1<<4);
-	OUTB(lpt_outbyte, lpt_iobase);
-	return 0;
-}
-
 #else
 #error PCI port I/O access is not supported on this architecture yet.
 #endif