Hello build bot (Jenkins), David Hendricks,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/flashrom/+/44517
to look at the new patch set (#3).
Change subject: udelay.c: Enable providing delay calibration value through CLI ......................................................................
udelay.c: Enable providing delay calibration value through CLI
This commit implements --get-loop-delay/--set-loop-delay options to retrieve and provide the calibration loop delay through the command line. The delay calibration procedure can take up to few seconds, which adds up when executed a number of times consecutively. Therefore, this provides a means to execute it only once, and then re-use the calibrated value on subsequent runs. Also, it implements a sanity check, expecting the value to land within 10% of the theoretical delay expectance, otherwise it ignores the provided value and runs the calibration procedure instead.
Signed-off-by: Hrvoje Cavrak hrvoje@hrvoje.org Change-Id: I7c9a491c5cb5fb3af56a691a0c6af9b53dcff550 --- M cli_classic.c M flashrom.8.tmpl M libflashrom.c M programmer.h M udelay.c 5 files changed, 60 insertions(+), 7 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/17/44517/3