[flashrom-gerrit] Change in flashrom[master]: Revert "ft2232_spi.c: Generalize GPIOL pin control"

[Nico Huber (Code Review)]

Nico Huber has submitted this change. ( https://review.coreboot.org/c/flashrom/+/55692 )

Change subject: Revert "ft2232_spi.c: Generalize GPIOL pin control"
......................................................................

Revert "ft2232_spi.c: Generalize GPIOL pin control"

This reverts commit 3207844ec0b5dc16f9ae9ee45294213dbf6d060b.

It used the `cs_bits` variable for its own purpose (not CS) which
was only possible because the `cs_bits` semantics were broken earlier.
It also lacks an update to the manpage.

Change-Id: I4a95317b1cf1fc6df9471d0cfb8a6a8f40964fe3
Signed-off-by: Nico Huber 
Reviewed-on: https://review.coreboot.org/c/flashrom/+/55692
Tested-by: build bot (Jenkins) 
Reviewed-by: Angel Pons 
---
M ft2232_spi.c
1 file changed, 1 insertion(+), 43 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Angel Pons: Looks good to me, approved

diff --git a/ft2232_spi.c b/ft2232_spi.c
index 3757a24..78bf0fc 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -459,7 +459,7 @@
    }
    free(arg);

-	/* Allows setting multiple GPIOL pins to high, for example: csgpiol=012 */
+	/* Allows setting multiple GPIOL states, for example: csgpiol=012 */
    arg = extract_programmer_param("csgpiol");
    if (arg) {
    	unsigned int ngpios = strlen(arg);
@@ -480,48 +480,6 @@
    }
    free(arg);

-	/* Allows setting GPIOL pins high, low or input (high-z) */
-	arg = extract_programmer_param("gpiol");
-	if (arg) {
-		int ok = 0;
-		if (strlen(arg) == 4) {
-			ok = 1;
-			for (int i = 0; i < 4; i++) {
-				unsigned int pin = i + 4;
-				switch (toupper(arg[i])) {
-					case 'H':
-						cs_bits |= 1 << pin;
-						pindir |= 1 << pin;
-						break;
-					case 'L':
-						cs_bits &= ~(1 << pin);
-						pindir |= 1 << pin;
-						break;
-					case 'Z':
-						pindir &= ~(1 << pin);
-						break;
-					case 'X':
-						break;
-					default:
-						ok = 0;
-				}
-			}
-		}
-		if (!ok) {
-			msg_perr("Error: Invalid GPIOLs specified: "%s".\n"
-				 "Valid values are 4 character strings of H, L, Z and X.\n"
-				 "    H - Set GPIOL output high\n"
-				 "    L - Set GPIOL output low\n"
-				 "    Z - Set GPIOL as input (high impedance)\n"
-				 "    X - Leave as programmer default\n"
-				 "Example: gpiol=LZXH drives GPIOL 0 low, and GPIOL 3 high, sets GPIOL 1\n"
-				 "to an input and leaves GPIOL 2 set according to the programmer type.\n", arg);
-			free(arg);
-			return -2;
-		}
-	}
-	free(arg);
-
    msg_pdbg("Using device type %s %s ",
    	 get_ft2232_vendorname(ft2232_vid, ft2232_type),
    	 get_ft2232_devicename(ft2232_vid, ft2232_type));