Nico Huber has submitted this change. ( https://review.coreboot.org/c/flashrom/+/56414 )
Change subject: dediprog.c: Refactor singleton states into reentrant pattern ......................................................................
dediprog.c: Refactor singleton states into reentrant pattern
Move global singleton states into a struct and store within the spi_master data field for the life-time of the driver.
This is one of the steps on the way to move spi_master data memory management behind the initialisation API, for more context see other patches under the same topic "register_master_api".
BUG=b:185191942 TEST=builds and ninja test
Change-Id: I72085e750af97b94dfa94f2ebf2a134e41a2ec8d Signed-off-by: Anastasia Klimchuk aklm@chromium.org Reviewed-on: https://review.coreboot.org/c/flashrom/+/56414 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Nico Huber nico.h@gmx.de --- M dediprog.c 1 file changed, 152 insertions(+), 114 deletions(-)
Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved
diff --git a/dediprog.c b/dediprog.c index 323dcd0..942cc26 100644 --- a/dediprog.c +++ b/dediprog.c @@ -43,10 +43,6 @@ #define REQTYPE_OTHER_IN (LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_OTHER) /* 0xC3 */ #define REQTYPE_EP_OUT (LIBUSB_ENDPOINT_OUT | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_ENDPOINT) /* 0x42 */ #define REQTYPE_EP_IN (LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_ENDPOINT) /* 0xC2 */ -static struct libusb_context *usb_ctx; -static libusb_device_handle *dediprog_handle; -static int dediprog_in_endpoint; -static int dediprog_out_endpoint;
enum dediprog_devtype { DEV_UNKNOWN = 0, @@ -158,8 +154,14 @@ {0}, };
-static int dediprog_firmwareversion = FIRMWARE_VERSION(0, 0, 0); -static enum dediprog_devtype dediprog_devicetype = DEV_UNKNOWN; +struct dediprog_data { + struct libusb_context *usb_ctx; + libusb_device_handle *dediprog_handle; + int dediprog_in_endpoint; + int dediprog_out_endpoint; + int dediprog_firmwareversion; + enum dediprog_devtype dediprog_devicetype; +};
#if defined(LIBUSB_MAJOR) && defined(LIBUSB_MINOR) && defined(LIBUSB_MICRO) && \ LIBUSB_MAJOR <= 1 && LIBUSB_MINOR == 0 && LIBUSB_MICRO < 9 @@ -177,20 +179,20 @@ } #endif
-static enum protocol protocol(void) +static enum protocol protocol(const struct dediprog_data *dp_data) { /* Firmware version < 5.0.0 is handled explicitly in some cases. */ - switch (dediprog_devicetype) { + switch (dp_data->dediprog_devicetype) { case DEV_SF100: case DEV_SF200: - if (dediprog_firmwareversion < FIRMWARE_VERSION(5, 5, 0)) + if (dp_data->dediprog_firmwareversion < FIRMWARE_VERSION(5, 5, 0)) return PROTOCOL_V1; else return PROTOCOL_V2; case DEV_SF600: - if (dediprog_firmwareversion < FIRMWARE_VERSION(6, 9, 0)) + if (dp_data->dediprog_firmwareversion < FIRMWARE_VERSION(6, 9, 0)) return PROTOCOL_V1; - else if (dediprog_firmwareversion <= FIRMWARE_VERSION(7, 2, 21)) + else if (dp_data->dediprog_firmwareversion <= FIRMWARE_VERSION(7, 2, 21)) return PROTOCOL_V2; else return PROTOCOL_V3; @@ -215,7 +217,9 @@ ++status->finished_idx; }
-static int dediprog_bulk_read_poll(const struct dediprog_transfer_status *const status, const int finish) +static int dediprog_bulk_read_poll(struct libusb_context *usb_ctx, + const struct dediprog_transfer_status *const status, + const int finish) { if (status->finished_idx >= status->queued_idx) return 0; @@ -231,13 +235,17 @@ return 0; }
-static int dediprog_read(enum dediprog_cmds cmd, unsigned int value, unsigned int idx, uint8_t *bytes, size_t size) +static int dediprog_read(libusb_device_handle *dediprog_handle, + enum dediprog_cmds cmd, unsigned int value, unsigned int idx, + uint8_t *bytes, size_t size) { return libusb_control_transfer(dediprog_handle, REQTYPE_EP_IN, cmd, value, idx, (unsigned char *)bytes, size, DEFAULT_TIMEOUT); }
-static int dediprog_write(enum dediprog_cmds cmd, unsigned int value, unsigned int idx, const uint8_t *bytes, size_t size) +static int dediprog_write(libusb_device_handle *dediprog_handle, + enum dediprog_cmds cmd, unsigned int value, unsigned int idx, + const uint8_t *bytes, size_t size) { return libusb_control_transfer(dediprog_handle, REQTYPE_EP_OUT, cmd, value, idx, (unsigned char *)bytes, size, DEFAULT_TIMEOUT); @@ -245,7 +253,7 @@
/* This function sets the GPIOs connected to the LEDs as well as IO1-IO4. */ -static int dediprog_set_leds(int leds) +static int dediprog_set_leds(int leds, const struct dediprog_data *dp_data) { if (leds < LED_NONE || leds > LED_ALL) leds = LED_ALL; @@ -260,18 +268,18 @@ * FIXME: take IO pins into account */ int target_leds, ret; - if (protocol() >= PROTOCOL_V2) { + if (protocol(dp_data) >= PROTOCOL_V2) { target_leds = (leds ^ 7) << 8; - ret = dediprog_write(CMD_SET_IO_LED, target_leds, 0, NULL, 0); + ret = dediprog_write(dp_data->dediprog_handle, CMD_SET_IO_LED, target_leds, 0, NULL, 0); } else { - if (dediprog_firmwareversion < FIRMWARE_VERSION(5, 0, 0)) { + if (dp_data->dediprog_firmwareversion < FIRMWARE_VERSION(5, 0, 0)) { target_leds = ((leds & LED_ERROR) >> 2) | ((leds & LED_PASS) << 2); } else { target_leds = leds; } target_leds ^= 7;
- ret = dediprog_write(CMD_SET_IO_LED, 0x9, target_leds, NULL, 0); + ret = dediprog_write(dp_data->dediprog_handle, CMD_SET_IO_LED, 0x9, target_leds, NULL, 0); }
if (ret != 0x0) { @@ -282,7 +290,7 @@ return 0; }
-static int dediprog_set_spi_voltage(int millivolt) +static int dediprog_set_spi_voltage(libusb_device_handle *dediprog_handle, int millivolt) { int ret; uint16_t voltage_selector; @@ -312,7 +320,7 @@ /* Wait some time as the original driver does. */ programmer_delay(200 * 1000); } - ret = dediprog_write(CMD_SET_VCC, voltage_selector, 0, NULL, 0); + ret = dediprog_write(dediprog_handle, CMD_SET_VCC, voltage_selector, 0, NULL, 0); if (ret != 0x0) { msg_perr("Command Set SPI Voltage 0x%x failed!\n", voltage_selector); @@ -342,9 +350,9 @@ { NULL, 0x0 }, };
-static int dediprog_set_spi_speed(unsigned int spispeed_idx) +static int dediprog_set_spi_speed(unsigned int spispeed_idx, const struct dediprog_data *dp_data) { - if (dediprog_firmwareversion < FIRMWARE_VERSION(5, 0, 0)) { + if (dp_data->dediprog_firmwareversion < FIRMWARE_VERSION(5, 0, 0)) { msg_pwarn("Skipping to set SPI speed because firmware is too old.\n"); return 0; } @@ -352,7 +360,7 @@ const struct dediprog_spispeeds *spispeed = &spispeeds[spispeed_idx]; msg_pdbg("SPI speed is %sHz\n", spispeed->name);
- int ret = dediprog_write(CMD_SET_SPI_CLK, spispeed->speed, 0, NULL, 0); + int ret = dediprog_write(dp_data->dediprog_handle, CMD_SET_SPI_CLK, spispeed->speed, 0, NULL, 0); if (ret != 0x0) { msg_perr("Command Set SPI Speed 0x%x failed!\n", spispeed->speed); return 1; @@ -364,6 +372,8 @@ struct flashctx *const flash, uint8_t *data_packet, unsigned int count, uint8_t dedi_spi_cmd, unsigned int *value, unsigned int *idx, unsigned int start, int is_read) { + const struct dediprog_data *dp_data = flash->mst->spi.data; + if (count >= 1 << 16) { msg_perr("%s: Unsupported transfer length of %u blocks! " "Please report a bug at flashrom@flashrom.org\n", @@ -378,7 +388,7 @@ data_packet[3] = dedi_spi_cmd; /* Read/Write Mode (currently READ_MODE_STD, WRITE_MODE_PAGE_PGM or WRITE_MODE_2B_AAI) */ data_packet[4] = 0; /* "Opcode". Specs imply necessity only for READ_MODE_4B_ADDR_FAST and WRITE_MODE_4B_ADDR_256B_PAGE_PGM */
- if (protocol() >= PROTOCOL_V2) { + if (protocol(dp_data) >= PROTOCOL_V2) { if (is_read && flash->chip->feature_bits & FEATURE_4BA_FAST_READ) { data_packet[3] = READ_MODE_4B_ADDR_FAST_0x0C; data_packet[4] = JEDEC_READ_4BA_FAST; @@ -394,7 +404,7 @@ data_packet[7] = (start >> 8) & 0xff; data_packet[8] = (start >> 16) & 0xff; data_packet[9] = (start >> 24) & 0xff; - if (protocol() >= PROTOCOL_V3) { + if (protocol(dp_data) >= PROTOCOL_V3) { if (is_read) { data_packet[10] = 0x00; /* address length (3 or 4) */ data_packet[11] = 0x00; /* dummy cycle / 2 */ @@ -435,6 +445,7 @@ static int dediprog_spi_bulk_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { int err = 1; + const struct dediprog_data *dp_data = flash->mst->spi.data;
/* chunksize must be 512, other sizes will NOT work at all. */ const unsigned int chunksize = 512; @@ -454,7 +465,7 @@ }
int command_packet_size; - switch (protocol()) { + switch (protocol(dp_data)) { case PROTOCOL_V1: command_packet_size = 5; break; @@ -473,7 +484,8 @@ if (prepare_rw_cmd(flash, data_packet, count, READ_MODE_STD, &value, &idx, start, 1)) return 1;
- int ret = dediprog_write(CMD_READ, value, idx, data_packet, sizeof(data_packet)); + int ret = dediprog_write(dp_data->dediprog_handle, + CMD_READ, value, idx, data_packet, sizeof(data_packet)); if (ret != (int)sizeof(data_packet)) { msg_perr("Command Read SPI Bulk failed, %i %s!\n", ret, libusb_error_name(ret)); return 1; @@ -501,7 +513,8 @@ (status.queued_idx - status.finished_idx) < DEDIPROG_ASYNC_TRANSFERS) { transfer = transfers[status.queued_idx % DEDIPROG_ASYNC_TRANSFERS]; - libusb_fill_bulk_transfer(transfer, dediprog_handle, 0x80 | dediprog_in_endpoint, + libusb_fill_bulk_transfer(transfer, + dp_data->dediprog_handle, 0x80 | dp_data->dediprog_in_endpoint, (unsigned char *)buf + status.queued_idx * chunksize, chunksize, dediprog_bulk_read_cb, &status, DEFAULT_TIMEOUT); transfer->flags |= LIBUSB_TRANSFER_SHORT_NOT_OK; @@ -513,11 +526,11 @@ } ++status.queued_idx; } - if (dediprog_bulk_read_poll(&status, 0)) + if (dediprog_bulk_read_poll(dp_data->usb_ctx, &status, 0)) goto err_free; } /* Wait for transfers to finish. */ - if (dediprog_bulk_read_poll(&status, 1)) + if (dediprog_bulk_read_poll(dp_data->usb_ctx, &status, 0)) goto err_free; /* Check if everything has been transmitted. */ if ((status.finished_idx < count) || status.error) @@ -526,7 +539,7 @@ err = 0;
err_free: - dediprog_bulk_read_poll(&status, 1); + dediprog_bulk_read_poll(dp_data->usb_ctx, &status, 1); for (i = 0; i < DEDIPROG_ASYNC_TRANSFERS; ++i) if (transfers[i]) libusb_free_transfer(transfers[i]); return err; @@ -539,8 +552,9 @@ const unsigned int chunksize = 0x200; unsigned int residue = start % chunksize ? min(len, chunksize - start % chunksize) : 0; unsigned int bulklen; + const struct dediprog_data *dp_data = flash->mst->spi.data;
- dediprog_set_leds(LED_BUSY); + dediprog_set_leds(LED_BUSY, dp_data);
if (residue) { msg_pdbg("Slow read for partial block from 0x%x, length 0x%x\n", @@ -566,10 +580,10 @@ goto err; }
- dediprog_set_leds(LED_PASS); + dediprog_set_leds(LED_PASS, dp_data); return 0; err: - dediprog_set_leds(LED_ERROR); + dediprog_set_leds(LED_ERROR, dp_data); return ret; }
@@ -588,6 +602,7 @@ * space in a USB bulk transfer must be filled with 0xff padding. */ const unsigned int count = len / chunksize; + const struct dediprog_data *dp_data = flash->mst->spi.data;
/* * We should change this check to @@ -611,7 +626,7 @@ return 0;
int command_packet_size; - switch (protocol()) { + switch (protocol(dp_data)) { case PROTOCOL_V1: command_packet_size = 5; break; @@ -629,7 +644,8 @@ unsigned int value, idx; if (prepare_rw_cmd(flash, data_packet, count, dedi_spi_cmd, &value, &idx, start, 0)) return 1; - int ret = dediprog_write(CMD_WRITE, value, idx, data_packet, sizeof(data_packet)); + int ret = dediprog_write(dp_data->dediprog_handle, + CMD_WRITE, value, idx, data_packet, sizeof(data_packet)); if (ret != (int)sizeof(data_packet)) { msg_perr("Command Write SPI Bulk failed, %s!\n", libusb_error_name(ret)); return 1; @@ -641,7 +657,8 @@ memcpy(usbbuf, buf + i * chunksize, chunksize); memset(usbbuf + chunksize, 0xff, sizeof(usbbuf) - chunksize); // fill up with 0xFF int transferred; - ret = libusb_bulk_transfer(dediprog_handle, dediprog_out_endpoint, usbbuf, 512, &transferred, + ret = libusb_bulk_transfer(dp_data->dediprog_handle, dp_data->dediprog_out_endpoint, + usbbuf, 512, &transferred, DEFAULT_TIMEOUT); if ((ret < 0) || (transferred != 512)) { msg_perr("SPI bulk write failed, expected %i, got %s!\n", 512, libusb_error_name(ret)); @@ -659,8 +676,9 @@ const unsigned int chunksize = flash->chip->page_size; unsigned int residue = start % chunksize ? chunksize - start % chunksize : 0; unsigned int bulklen; + const struct dediprog_data *dp_data = flash->mst->spi.data;
- dediprog_set_leds(LED_BUSY); + dediprog_set_leds(LED_BUSY, dp_data);
if (chunksize != 256) { msg_pdbg("Page sizes other than 256 bytes are unsupported as " @@ -675,7 +693,7 @@ /* No idea about the real limit. Maybe 16 including command and address, maybe more. */ ret = spi_write_chunked(flash, buf, start, residue, 11); if (ret) { - dediprog_set_leds(LED_ERROR); + dediprog_set_leds(LED_ERROR, dp_data); return ret; } } @@ -684,7 +702,7 @@ bulklen = (len - residue) / chunksize * chunksize; ret = dediprog_spi_bulk_write(flash, buf + residue, chunksize, start + residue, bulklen, dedi_spi_cmd); if (ret) { - dediprog_set_leds(LED_ERROR); + dediprog_set_leds(LED_ERROR, dp_data); return ret; }
@@ -695,12 +713,12 @@ ret = spi_write_chunked(flash, buf + residue + bulklen, start + residue + bulklen, len, 11); if (ret) { - dediprog_set_leds(LED_ERROR); + dediprog_set_leds(LED_ERROR, dp_data); return ret; } }
- dediprog_set_leds(LED_PASS); + dediprog_set_leds(LED_PASS, dp_data); return 0; }
@@ -721,6 +739,7 @@ unsigned char *readarr) { int ret; + const struct dediprog_data *dp_data = flash->mst->spi.data;
msg_pspew("%s, writecnt=%i, readcnt=%i\n", __func__, writecnt, readcnt); if (writecnt > flash->mst->spi.max_data_write) { @@ -735,14 +754,14 @@ unsigned int idx, value; /* New protocol has options and timeout combined as value while the old one used the value field for * timeout and the index field for options. */ - if (protocol() >= PROTOCOL_V2) { + if (protocol(dp_data) >= PROTOCOL_V2) { idx = 0; value = readcnt ? 0x1 : 0x0; // Indicate if we require a read } else { idx = readcnt ? 0x1 : 0x0; // Indicate if we require a read value = 0; } - ret = dediprog_write(CMD_TRANSCEIVE, value, idx, writearr, writecnt); + ret = dediprog_write(dp_data->dediprog_handle, CMD_TRANSCEIVE, value, idx, writearr, writecnt); if (ret != (int)writecnt) { msg_perr("Send SPI failed, expected %i, got %i %s!\n", writecnt, ret, libusb_error_name(ret)); @@ -767,9 +786,9 @@ idx = (0 & 0xFF); // Lower byte is option (0x01 = require SR, 0x02 keep CS low) value = min(read_timeout, 0xFF); // Possibly two bytes but we play safe here } - ret = dediprog_read(CMD_TRANSCEIVE, value, idx, readarr, readcnt); + ret = dediprog_read(dp_data->dediprog_handle, CMD_TRANSCEIVE, value, idx, readarr, readcnt); */ - ret = dediprog_read(CMD_TRANSCEIVE, 0, 0, readarr, readcnt); + ret = dediprog_read(dp_data->dediprog_handle, CMD_TRANSCEIVE, 0, 0, readarr, readcnt); if (ret != (int)readcnt) { msg_perr("Receive SPI failed, expected %i, got %i %s!\n", readcnt, ret, libusb_error_name(ret)); return 1; @@ -777,13 +796,13 @@ return 0; }
-static int dediprog_check_devicestring(void) +static int dediprog_check_devicestring(struct dediprog_data *dp_data) { int ret; char buf[0x11];
/* Command Receive Device String. */ - ret = dediprog_read(CMD_READ_PROG_INFO, 0, 0, (uint8_t *)buf, 0x10); + ret = dediprog_read(dp_data->dediprog_handle, CMD_READ_PROG_INFO, 0, 0, (uint8_t *)buf, 0x10); if (ret != 0x10) { msg_perr("Incomplete/failed Command Receive Device String!\n"); return 1; @@ -791,11 +810,11 @@ buf[0x10] = '\0'; msg_pdbg("Found a %s\n", buf); if (memcmp(buf, "SF100", 0x5) == 0) - dediprog_devicetype = DEV_SF100; + dp_data->dediprog_devicetype = DEV_SF100; else if (memcmp(buf, "SF200", 0x5) == 0) - dediprog_devicetype = DEV_SF200; + dp_data->dediprog_devicetype = DEV_SF200; else if (memcmp(buf, "SF600", 0x5) == 0) - dediprog_devicetype = DEV_SF600; + dp_data->dediprog_devicetype = DEV_SF600; else { msg_perr("Device not a SF100, SF200, or SF600!\n"); return 1; @@ -804,7 +823,7 @@ int sfnum; int fw[3]; if (sscanf(buf, "SF%d V:%d.%d.%d ", &sfnum, &fw[0], &fw[1], &fw[2]) != 4 || - sfnum != (int)dediprog_devicetype) { + sfnum != (int)dp_data->dediprog_devicetype) { msg_perr("Unexpected firmware version string '%s'\n", buf); return 1; } @@ -814,8 +833,8 @@ return 1; }
- dediprog_firmwareversion = FIRMWARE_VERSION(fw[0], fw[1], fw[2]); - if (protocol() == PROTOCOL_UNKNOWN) { + dp_data->dediprog_firmwareversion = FIRMWARE_VERSION(fw[0], fw[1], fw[2]); + if (protocol(dp_data) == PROTOCOL_UNKNOWN) { msg_perr("Internal error: Unable to determine protocol version.\n"); return 1; } @@ -831,7 +850,7 @@ * much different. * @return the id on success, -1 on failure */ -static int dediprog_read_id(void) +static int dediprog_read_id(libusb_device_handle *dediprog_handle) { int ret; uint8_t buf[3]; @@ -859,7 +878,7 @@ /* This command presumably sets the voltage for the SF100 itself (not the SPI flash). * Only use dediprog_set_voltage on SF100 programmers with firmware older * than V6.0.0. Newer programmers (including all SF600s) do not support it. */ -static int dediprog_set_voltage(void) +static int dediprog_set_voltage(libusb_device_handle *dediprog_handle) { unsigned char buf[1] = {0}; int ret = libusb_control_transfer(dediprog_handle, REQTYPE_OTHER_IN, CMD_SET_VOLTAGE, 0x0, 0x0, @@ -876,15 +895,16 @@ return 0; }
-static int dediprog_standalone_mode(void) +static int dediprog_standalone_mode(const struct dediprog_data *dp_data) { int ret;
- if (dediprog_devicetype != DEV_SF600) + if (dp_data->dediprog_devicetype != DEV_SF600) return 0;
msg_pdbg2("Disabling standalone mode.\n"); - ret = dediprog_write(CMD_SET_STANDALONE, LEAVE_STANDALONE_MODE, 0, NULL, 0); + ret = dediprog_write(dp_data->dediprog_handle, + CMD_SET_STANDALONE, LEAVE_STANDALONE_MODE, 0, NULL, 0); if (ret) { msg_perr("Failed to disable standalone mode: %s\n", libusb_error_name(ret)); return 1; @@ -898,7 +918,7 @@ * Present in eng_detect_blink.log with firmware 3.1.8 * Always preceded by Command Receive Device String */ -static int dediprog_command_b(void) +static int dediprog_command_b(libusb_device_handle *dediprog_handle) { int ret; char buf[0x3]; @@ -919,9 +939,9 @@ } #endif
-static int set_target_flash(enum dediprog_target target) +static int set_target_flash(libusb_device_handle *dediprog_handle, enum dediprog_target target) { - int ret = dediprog_write(CMD_SET_TARGET, target, 0, NULL, 0); + int ret = dediprog_write(dediprog_handle, CMD_SET_TARGET, target, 0, NULL, 0); if (ret != 0) { msg_perr("set_target_flash failed (%s)!\n", libusb_error_name(ret)); return 1; @@ -931,7 +951,7 @@
#if 0 /* Returns true if the button is currently pressed. */ -static bool dediprog_get_button(void) +static bool dediprog_get_button(libusb_device_handle *dediprog_handle) { char buf[1]; int ret = usb_control_msg(dediprog_handle, REQTYPE_EP_IN, CMD_GET_BUTTON, 0, 0, @@ -994,20 +1014,25 @@
static int dediprog_shutdown(void *data) { - dediprog_devicetype = DEV_UNKNOWN; + int ret = 0; + struct dediprog_data *dp_data = data;
/* URB 28. Command Set SPI Voltage to 0. */ - if (dediprog_set_spi_voltage(0x0)) - return 1; - - if (libusb_release_interface(dediprog_handle, 0)) { - msg_perr("Could not release USB interface!\n"); - return 1; + if (dediprog_set_spi_voltage(dp_data->dediprog_handle, 0x0)) { + ret = 1; + goto out; } - libusb_close(dediprog_handle); - libusb_exit(usb_ctx);
- return 0; + if (libusb_release_interface(dp_data->dediprog_handle, 0)) { + msg_perr("Could not release USB interface!\n"); + ret = 1; + goto out; + } + libusb_close(dp_data->dediprog_handle); + libusb_exit(dp_data->usb_ctx); +out: + free(data); + return ret; }
static struct spi_master spi_master_dediprog = { @@ -1027,30 +1052,31 @@ * @index index of the USB device * @return 0 for success, -1 for error, -2 for busy device */ -static int dediprog_open(int index) +static int dediprog_open(int index, struct dediprog_data *dp_data) { const uint16_t vid = devs_dediprog[0].vendor_id; const uint16_t pid = devs_dediprog[0].device_id; int ret;
- dediprog_handle = usb_dev_get_by_vid_pid_number(usb_ctx, vid, pid, (unsigned int) index); - if (!dediprog_handle) { + dp_data->dediprog_handle = usb_dev_get_by_vid_pid_number(dp_data->usb_ctx, + vid, pid, (unsigned int) index); + if (!dp_data->dediprog_handle) { msg_perr("Could not find a Dediprog programmer on USB.\n"); - libusb_exit(usb_ctx); + libusb_exit(dp_data->usb_ctx); return -1; } - ret = libusb_set_configuration(dediprog_handle, 1); + ret = libusb_set_configuration(dp_data->dediprog_handle, 1); if (ret != 0) { msg_perr("Could not set USB device configuration: %i %s\n", ret, libusb_error_name(ret)); - libusb_close(dediprog_handle); + libusb_close(dp_data->dediprog_handle); return -2; } - ret = libusb_claim_interface(dediprog_handle, 0); + ret = libusb_claim_interface(dp_data->dediprog_handle, 0); if (ret < 0) { msg_perr("Could not claim USB device interface %i: %i %s\n", 0, ret, libusb_error_name(ret)); - libusb_close(dediprog_handle); + libusb_close(dp_data->dediprog_handle); return -2; } return 0; @@ -1177,19 +1203,27 @@ } free(target_str);
- /* Here comes the USB stuff. */ - libusb_init(&usb_ctx); - if (!usb_ctx) { - msg_perr("Could not initialize libusb!\n"); + struct dediprog_data *dp_data = calloc(1, sizeof(*dp_data)); + if (!dp_data) { + msg_perr("Unable to allocate space for SPI master data\n"); return 1; } + dp_data->dediprog_firmwareversion = FIRMWARE_VERSION(0, 0, 0); + dp_data->dediprog_devicetype = DEV_UNKNOWN; + + /* Here comes the USB stuff. */ + libusb_init(&dp_data->usb_ctx); + if (!dp_data->usb_ctx) { + msg_perr("Could not initialize libusb!\n"); + goto init_err_exit; + }
if (id != -1) { for (i = 0; ; i++) { - ret = dediprog_open(i); + ret = dediprog_open(i, dp_data); if (ret == -1) { /* no dev */ - return 1; + goto init_err_exit; } else if (ret == -2) { /* busy dev */ continue; @@ -1202,26 +1236,26 @@ * device is in use by another instance of flashrom), * the device is skipped and the next device is tried. */ - found_id = dediprog_read_id(); + found_id = dediprog_read_id(dp_data->dediprog_handle); if (found_id < 0) { msg_perr("Could not read id.\n"); - libusb_release_interface(dediprog_handle, 0); - libusb_close(dediprog_handle); + libusb_release_interface(dp_data->dediprog_handle, 0); + libusb_close(dp_data->dediprog_handle); continue; } msg_pinfo("Found dediprog id SF%06d.\n", found_id); if (found_id != id) { - libusb_release_interface(dediprog_handle, 0); - libusb_close(dediprog_handle); + libusb_release_interface(dp_data->dediprog_handle, 0); + libusb_close(dp_data->dediprog_handle); continue; } break; } } else { - if (dediprog_open(usedevice)) { - return 1; + if (dediprog_open(usedevice, dp_data)) { + goto init_err_exit; } - found_id = dediprog_read_id(); + found_id = dediprog_read_id(dp_data->dediprog_handle); }
if (found_id >= 0) { @@ -1230,55 +1264,59 @@
/* Try reading the devicestring. If that fails and the device is old (FW < 6.0.0, which we can not know) * then we need to try the "set voltage" command and then attempt to read the devicestring again. */ - if (dediprog_check_devicestring()) { - if (dediprog_set_voltage()) + if (dediprog_check_devicestring(dp_data)) { + if (dediprog_set_voltage(dp_data->dediprog_handle)) goto init_err_cleanup_exit; - if (dediprog_check_devicestring()) + if (dediprog_check_devicestring(dp_data)) goto init_err_cleanup_exit; }
/* SF100/SF200 uses one in/out endpoint, SF600 uses separate in/out endpoints */ - dediprog_in_endpoint = 2; - switch (dediprog_devicetype) { + dp_data->dediprog_in_endpoint = 2; + switch (dp_data->dediprog_devicetype) { case DEV_SF100: case DEV_SF200: - dediprog_out_endpoint = 2; + dp_data->dediprog_out_endpoint = 2; break; default: - dediprog_out_endpoint = 1; + dp_data->dediprog_out_endpoint = 1; break; }
/* Set all possible LEDs as soon as possible to indicate activity. * Because knowing the firmware version is required to set the LEDs correctly we need to this after * dediprog_check_devicestring() has queried the device. */ - dediprog_set_leds(LED_ALL); + dediprog_set_leds(LED_ALL, dp_data);
/* Select target/socket, frequency and VCC. */ - if (set_target_flash(target) || - dediprog_set_spi_speed(spispeed_idx) || - dediprog_set_spi_voltage(millivolt)) { - dediprog_set_leds(LED_ERROR); + if (set_target_flash(dp_data->dediprog_handle, target) || + dediprog_set_spi_speed(spispeed_idx, dp_data) || + dediprog_set_spi_voltage(dp_data->dediprog_handle, millivolt)) { + dediprog_set_leds(LED_ERROR, dp_data); goto init_err_cleanup_exit; }
- if (dediprog_standalone_mode()) + if (dediprog_standalone_mode(dp_data)) goto init_err_cleanup_exit;
- if ((dediprog_devicetype == DEV_SF100) || - (dediprog_devicetype == DEV_SF600 && protocol() == PROTOCOL_V3)) + if ((dp_data->dediprog_devicetype == DEV_SF100) || + (dp_data->dediprog_devicetype == DEV_SF600 && protocol(dp_data) == PROTOCOL_V3)) spi_master_dediprog.features &= ~SPI_MASTER_NO_4BA_MODES;
- if (protocol() >= PROTOCOL_V2) + if (protocol(dp_data) >= PROTOCOL_V2) spi_master_dediprog.features |= SPI_MASTER_4BA;
- if (register_spi_master(&spi_master_dediprog, NULL) || dediprog_set_leds(LED_NONE)) + if (register_spi_master(&spi_master_dediprog, dp_data) || dediprog_set_leds(LED_NONE, dp_data)) return 1; /* shutdown function does cleanup */
return 0;
init_err_cleanup_exit: - dediprog_shutdown(NULL); + dediprog_shutdown(dp_data); + return 1; + +init_err_exit: + free(dp_data); return 1; }