[flashrom-gerrit] [S] Change in flashrom[main]: flashchips: add Winbond W25R512NW / W74M51NW

[Anastasia Klimchuk (Code Review)]

Anastasia Klimchuk has submitted this change. ( https://review.coreboot.org/c/flashrom/+/84752?usp=email )

Change subject: flashchips: add Winbond W25R512NW / W74M51NW
......................................................................

flashchips: add Winbond W25R512NW / W74M51NW

I used W25Q256JW as a template and just increased every erase size
calculation.

Datasheet can be found by form contact only via
https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flas...

I tested it by running:
dd if=/dev/urandom of=/tmp/random.bin bs=1M count=64
sudo /tmp/flashrom/build/flashrom -p ft2232_spi:type=2232H -w /tmp/random.bin --progress
sudo /tmp/flashrom/build/flashrom -p ft2232_spi:type=2232H -v /tmp/random.bin
And I saw "Verifying flash... VERIFIED."

Change-Id: Ibf670e4014a22e4636789768b759cb51f75cd046
Signed-off-by: Alexandru M Stan 
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84752
Tested-by: build bot (Jenkins) 
Reviewed-by: Anastasia Klimchuk 
---
M flashchips.c
M include/flashchips.h
2 files changed, 47 insertions(+), 0 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Anastasia Klimchuk: Looks good to me, approved

diff --git a/flashchips.c b/flashchips.c
index c32159d..742e017 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -20374,6 +20374,52 @@

{
    	.vendor		= "Winbond",
+		.name		= "W25R512NW/W74M51NW",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= WINBOND_NEX_ID,
+		.model_id	= WINBOND_NEX_W25R512NW,
+		.total_size	= 65536,
+		.page_size	= 256,
+		/* supports SFDP */
+		/* OTP: 3X256B; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA,
+		.tested		= TEST_OK_PREW,
+		.probe		= PROBE_SPI_RDID,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 16384} },
+				.block_erase = SPI_BLOCK_ERASE_21,
+			}, {
+				.eraseblocks = { {4 * 1024, 16384} },
+				.block_erase = SPI_BLOCK_ERASE_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 2048} },
+				.block_erase = SPI_BLOCK_ERASE_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 1024} },
+				.block_erase = SPI_BLOCK_ERASE_DC,
+			}, {
+				.eraseblocks = { {64 * 1024, 1024} },
+				.block_erase = SPI_BLOCK_ERASE_D8,
+			}, {
+				.eraseblocks = { {64 * 1024 * 1024, 1} },
+				.block_erase = SPI_BLOCK_ERASE_60,
+			}, {
+				.eraseblocks = { {64 * 1024 * 1024, 1} },
+				.block_erase = SPI_BLOCK_ERASE_C7,
+			}
+		},
+		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD,
+		.unlock		= SPI_DISABLE_BLOCKPROTECT,
+		.write		= SPI_CHIP_WRITE256,
+		.read		= SPI_CHIP_READ,
+		.voltage	= {1700, 1950},
+	},
+
+	{
+		.vendor		= "Winbond",
    	.name		= "W25Q256JW_DTR",
    	.bustype	= BUS_SPI,
    	.manufacture_id	= WINBOND_NEX_ID,
diff --git a/include/flashchips.h b/include/flashchips.h
index 719486e..0fea690 100644
--- a/include/flashchips.h
+++ b/include/flashchips.h
@@ -1027,6 +1027,7 @@
 #define WINBOND_NEX_W25Q64_W	0x6017	/* W25Q64DW; W25Q64FV in QPI mode */
 #define WINBOND_NEX_W25Q128_W	0x6018	/* W25Q128FW; W25Q128FV in QPI mode */
 #define WINBOND_NEX_W25Q256_W	0x6019	/* W25Q256JW */
+#define WINBOND_NEX_W25R512NW	0x6020	/* W25R512NW/W74M51NW */
 #define WINBOND_NEX_W25Q16JV_M	0x7015	/* W25Q16JV_M (QE=0) */
 #define WINBOND_NEX_W25Q32JV_M	0x7016	/* W25Q32JV_M (QE=0) */
 #define WINBOND_NEX_W25Q64JV	0x7017	/* W25Q64JV */