Edward O'Callaghan has submitted this change. ( https://review.coreboot.org/c/flashrom/+/47663 )
Change subject: it87spi.c: Remove 'it8716f_' prefix from local state tracker ......................................................................
it87spi.c: Remove 'it8716f_' prefix from local state tracker
The local state inhabited within the state tracker has now obvious scope and therefore we can drop the redundant prefix for readability.
BUG=b:173477683 TEST=builds
Change-Id: Ic1c9647ef640152417a66dbb411554b83e30ad75 Signed-off-by: Edward O'Callaghan quasisec@google.com Reviewed-on: https://review.coreboot.org/c/flashrom/+/47663 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Anastasia Klimchuk aklm@chromium.org Reviewed-by: Sam McNally sammc@google.com --- M it87spi.c 1 file changed, 21 insertions(+), 21 deletions(-)
Approvals: build bot (Jenkins): Verified Sam McNally: Looks good to me, approved Anastasia Klimchuk: Looks good to me, but someone else must approve
diff --git a/it87spi.c b/it87spi.c index cc70456..868b479 100644 --- a/it87spi.c +++ b/it87spi.c @@ -38,7 +38,7 @@ #define CHIP_VER_REG 0x22
struct it8716f_spi_data { - uint16_t it8716f_flashport; + uint16_t flashport; /* use fast 33MHz SPI (<>0) or slow 16MHz (0) */ int fast_spi; }; @@ -127,11 +127,11 @@ if (result) return result; /* FIXME: The command below seems to be redundant or wrong. */ - OUTB(0x06, data->it8716f_flashport + 1); - OUTB(((2 + (data->fast_spi ? 1 : 0)) << 4), data->it8716f_flashport); + OUTB(0x06, data->flashport + 1); + OUTB(((2 + (data->fast_spi ? 1 : 0)) << 4), data->flashport); for (i = 0; i < flash->chip->page_size; i++) mmio_writeb(buf[i], (void *)(bios + start + i)); - OUTB(0, data->it8716f_flashport); + OUTB(0, data->flashport); /* Wait until the Write-In-Progress bit is cleared. * This usually takes 1-10 ms, so wait in 1 ms steps. */ @@ -161,7 +161,7 @@ return SPI_GENERIC_ERROR;
do { - busy = INB(data->it8716f_flashport) & 0x80; + busy = INB(data->flashport) & 0x80; } while (busy); if (readcnt > 3) { msg_pinfo("%s called with unsupported readcnt %i.\n", @@ -170,27 +170,27 @@ } switch (writecnt) { case 1: - OUTB(writearr[0], data->it8716f_flashport + 1); + OUTB(writearr[0], data->flashport + 1); writeenc = 0x0; break; case 2: - OUTB(writearr[0], data->it8716f_flashport + 1); - OUTB(writearr[1], data->it8716f_flashport + 7); + OUTB(writearr[0], data->flashport + 1); + OUTB(writearr[1], data->flashport + 7); writeenc = 0x1; break; case 4: - OUTB(writearr[0], data->it8716f_flashport + 1); - OUTB(writearr[1], data->it8716f_flashport + 4); - OUTB(writearr[2], data->it8716f_flashport + 3); - OUTB(writearr[3], data->it8716f_flashport + 2); + OUTB(writearr[0], data->flashport + 1); + OUTB(writearr[1], data->flashport + 4); + OUTB(writearr[2], data->flashport + 3); + OUTB(writearr[3], data->flashport + 2); writeenc = 0x2; break; case 5: - OUTB(writearr[0], data->it8716f_flashport + 1); - OUTB(writearr[1], data->it8716f_flashport + 4); - OUTB(writearr[2], data->it8716f_flashport + 3); - OUTB(writearr[3], data->it8716f_flashport + 2); - OUTB(writearr[4], data->it8716f_flashport + 7); + OUTB(writearr[0], data->flashport + 1); + OUTB(writearr[1], data->flashport + 4); + OUTB(writearr[2], data->flashport + 3); + OUTB(writearr[3], data->flashport + 2); + OUTB(writearr[4], data->flashport + 7); writeenc = 0x3; break; default: @@ -204,17 +204,17 @@ * We can't use writecnt directly, but have to use a strange encoding. */ OUTB(((0x4 + (data->fast_spi ? 1 : 0)) << 4) - | ((readcnt & 0x3) << 2) | (writeenc), data->it8716f_flashport); + | ((readcnt & 0x3) << 2) | (writeenc), data->flashport);
if (readcnt > 0) { unsigned int i;
do { - busy = INB(data->it8716f_flashport) & 0x80; + busy = INB(data->flashport) & 0x80; } while (busy);
for (i = 0; i < readcnt; i++) - readarr[i] = INB(data->it8716f_flashport + 5 + i); + readarr[i] = INB(data->flashport + 5 + i); }
return 0; @@ -417,7 +417,7 @@ return SPI_GENERIC_ERROR; }
- data->it8716f_flashport = flashport; + data->flashport = flashport; data->fast_spi = 1; spi_master_it87xx.data = data;