[flashrom-gerrit] Change in flashrom[master]: flashchips: add support for GigaDevice GD25WQ80E

[Angel Pons (Code Review)]

Angel Pons has submitted this change. ( https://review.coreboot.org/c/flashrom/+/39820 )

Change subject: flashchips: add support for GigaDevice GD25WQ80E
......................................................................

flashchips: add support for GigaDevice GD25WQ80E

Support GD25WQ80E, which is the internal flash of IT81202.

TEST=Building flashrom and flashing FW image into IT81202 successfully.

Change-Id: Ib5feaa6ecc7b11b2218e5f02c087b4331388bef8
Signed-off-by: Dino Li 
Reviewed-on: https://review.coreboot.org/c/flashrom/+/39820
Tested-by: build bot (Jenkins) 
Reviewed-by: Angel Pons 
Reviewed-by: Paul Menzel 
Reviewed-by: Edward O'Callaghan 
---
M flashchips.c
M flashchips.h
2 files changed, 39 insertions(+), 0 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Paul Menzel: Looks good to me, but someone else must approve
  Angel Pons: Looks good to me, approved
  Edward O'Callaghan: Looks good to me, approved

diff --git a/flashchips.c b/flashchips.c
index 942cbc2..648fed4 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -6787,6 +6787,44 @@
    },

{
+		.vendor		= "GigaDevice",
+		.name		= "GD25WQ80E",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= GIGADEVICE_ID,
+		.model_id	= GIGADEVICE_GD25WQ80E,
+		.total_size	= 1024,
+		.page_size	= 256,
+		.feature_bits	= FEATURE_WRSR_WREN,
+		.tested		= TEST_OK_PREW,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 256} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 32} },
+				.block_erase = spi_block_erase_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 16} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {1 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {1 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_bp4_srwd,
+		.unlock		= spi_disable_blockprotect_bp4_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {1650, 3600},
+	},
+
+	{
    	.vendor		= "Hyundai",
    	.name		= "HY29F002B",
    	.bustype	= BUS_PARALLEL,
diff --git a/flashchips.h b/flashchips.h
index 36990e2..dc04a5a 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -384,6 +384,7 @@
 #define GIGADEVICE_GD25LQ32	0x6016
 #define GIGADEVICE_GD25LQ64	0x6017	/* Same as GD25LQ64B (which is faster) */
 #define GIGADEVICE_GD25LQ128CD	0x6018
+#define GIGADEVICE_GD25WQ80E	0x6514
 #define GIGADEVICE_GD29GL064CAB	0x7E0601

#define HYUNDAI_ID		0xAD	/* Hyundai */