Felix Singer has submitted this change. ( https://review.coreboot.org/c/flashrom/+/67825 )
Change subject: flashrom.8.tmpl: document mediatek_i2c_spi programmer ......................................................................
flashrom.8.tmpl: document mediatek_i2c_spi programmer
This adds a manpage section describing the mediatek_i2c_spi programmer, including some discussion of devices that are supported as well as which systems use them.
Signed-off-by: Peter Marheine pmarheine@chromium.org Change-Id: Ia63df470170fbadcabadcdad8e5acc0cde3a274b Reviewed-on: https://review.coreboot.org/c/flashrom/+/67825 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Anastasia Klimchuk aklm@chromium.org Reviewed-by: Felix Singer felixsinger@posteo.net --- M flashrom.8.tmpl 1 file changed, 42 insertions(+), 1 deletion(-)
Approvals: build bot (Jenkins): Verified Felix Singer: Looks good to me, approved Anastasia Klimchuk: Looks good to me, approved
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index 2cf3a38..5579011 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -429,6 +429,8 @@ .sp .BR "* parade_lspcon" " (for SPI flash ROMs attached to Parade Technologies LSPCONs (PS175))" .sp +.BR "* mediatek_i2c_spi" " (for SPI flash ROMs attached to some Mediatek display devices accessible over I2C)" +.sp Some programmers have optional or mandatory parameters which are described in detail in the .B PROGRAMMER-SPECIFIC INFORMATION @@ -1521,7 +1523,7 @@ If the passed frequency is not supported by the adapter the nearest lower supported frequency will be used. .SS -.BR "realtek_mst_i2c_spi " and " parade_lspcon " programmers +.BR "realtek_mst_i2c_spi ", " parade_lspcon ", and " mediatek_i2c_spi " programmers .IP These programmers tunnel SPI commands through I2C-connected devices. The I2C bus over which communication occurs must be specified either by device path @@ -1575,6 +1577,27 @@ e.g. the PS175. Communication to the SPI flash is tunneled through the LSPCON over I2C.
+.SS +.BR "mediatek_i2c_spi " programmer +.IP +This programmer supports SPI flash programming for chips attached to some +Mediatek display controllers, themselves accessed through I2C (tunneling +SPI flash commands through an I2C connection with the host). +.sp +The programmer is designed to support the TSUMOP82JUQ integrated display driver +and scaler as used in the Google Meet Series One Desk 27 (which runs a version +of ChromeOS and uses flashrom in its \fBtsum-scaler-updater\fP scripts that +ship with the OS). Other chips may use compatible protocols but have not been +tested with this programmer, and external chip IOs may need to be controlled +through other non-flashrom means to configure the chip in order for it to +operate as expected. +.sp +\fBdevpath\fP and \fBbus\fP options select the I2C bus to use, as described +previously. \fBallow_brick\fP defaults to no, and must explicitly be set to +"yes" in order for the programmer to operate. This is required because there is +no mechanism in the driver to positively identify that a given I2C bus is +actually connected to a supported device. + .SH EXAMPLES To back up and update your BIOS, run .sp