Edward O'Callaghan has submitted this change. ( https://review.coreboot.org/c/flashrom/+/46513 )
Change subject: flashchips: Add support for Fudan SPI flash chips ......................................................................
flashchips: Add support for Fudan SPI flash chips
Signed-off-by: Jakob Petersson github@jakobpetersson.se Change-Id: I8045ecb8778fd6111fcccc075e69928f131a926a Reviewed-on: https://review.coreboot.org/c/flashrom/+/46513 Reviewed-by: David Hendricks david.hendricks@gmail.com Reviewed-by: Edward O'Callaghan quasisec@chromium.org Reviewed-by: Nikolai Artemiev nartemiev@google.com Reviewed-by: Angel Pons th3fanbus@gmail.com Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M flashchips.c M flashchips.h 2 files changed, 282 insertions(+), 0 deletions(-)
Approvals: build bot (Jenkins): Verified David Hendricks: Looks good to me, approved Angel Pons: Looks good to me, approved Edward O'Callaghan: Looks good to me, approved Nikolai Artemiev: Looks good to me, but someone else must approve
diff --git a/flashchips.c b/flashchips.c index 7d10abf..48efb85 100644 --- a/flashchips.c +++ b/flashchips.c @@ -5691,6 +5691,278 @@ },
{ + .vendor = "Fudan", + .name = "FM25F005", + .bustype = BUS_SPI, + .manufacture_id = FUDAN_ID_NOPREFIX, + .model_id = FUDAN_FM25F005, + .total_size = 64, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_tb_bpl, + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, /* 2.3-2.7V acceptable results in lower performance */ + }, + + { + .vendor = "Fudan", + .name = "FM25F01", + .bustype = BUS_SPI, + .manufacture_id = FUDAN_ID_NOPREFIX, + .model_id = FUDAN_FM25F01, + .total_size = 128, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_tb_bpl, + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, /* 2.3-2.7V acceptable results in lower performance */ + }, + + { + .vendor = "Fudan", + .name = "FM25F02(A)", + .bustype = BUS_SPI, + .manufacture_id = FUDAN_ID_NOPREFIX, + .model_id = FUDAN_FM25F02, + .total_size = 256, + .page_size = 256, + /* OTP: 256B total; enter 0x3A, (A version only:) read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 256, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 256, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp2_tb_bpl, + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, /* 2.3-2.7V acceptable results in lower performance */ + }, + + { + .vendor = "Fudan", + .name = "FM25F04(A)", + .bustype = BUS_SPI, + .manufacture_id = FUDAN_ID_NOPREFIX, + .model_id = FUDAN_FM25F04, + .total_size = 512, + .page_size = 256, + /* OTP: 256B total; enter 0x3A, (A version only:) read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 512, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 512, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp2_tb_bpl, + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Fudan", + .name = "FM25Q08", + .bustype = BUS_SPI, + .manufacture_id = FUDAN_ID_NOPREFIX, + .model_id = FUDAN_FM25Q08, + .total_size = 1024, + .page_size = 256, + /* supports SFDP */ + /* OTP: 1024B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp2_tb_bpl, /* bit6 selects size of protected blocks; TODO: SR2 */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Fudan", + .name = "FM25Q16", + .bustype = BUS_SPI, + .manufacture_id = FUDAN_ID_NOPREFIX, + .model_id = FUDAN_FM25Q16, + .total_size = 2048, + .page_size = 256, + /* supports SFDP */ + /* OTP: 1024B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_tb_bpl, /* bit6 selects size of protected blocks; TODO: SR2 */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Fudan", + .name = "FM25Q32", + .bustype = BUS_SPI, + .manufacture_id = FUDAN_ID_NOPREFIX, + .model_id = FUDAN_FM25Q32, + .total_size = 4096, + .page_size = 256, + /* supports SFDP */ + /* OTP: 1024B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp2_tb_bpl, /* bit6 selects size of protected blocks; TODO: SR2 */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { .vendor = "Fujitsu", .name = "MBM29F004BC", .bustype = BUS_PARALLEL, diff --git a/flashchips.h b/flashchips.h index 5b7937f..87aedc2 100644 --- a/flashchips.h +++ b/flashchips.h @@ -329,6 +329,16 @@ #define FIDELIX_FM25Q32 0x3216 #define FIDELIX_FM25Q64 0x3217
+#define FUDAN_ID 0x7F7F7F7F7F7F7FA1 /* Shanghai Fudan Microelectronics resides in bank 8 */ +#define FUDAN_ID_NOPREFIX 0xA1 /* Fudan, missing 0x7F prefix */ +#define FUDAN_FM25F005 0x3110 +#define FUDAN_FM25F01 0x3111 +#define FUDAN_FM25F02 0x3112 /* Same as FM25F02A */ +#define FUDAN_FM25F04 0x3113 /* Same as FM25F04A */ +#define FUDAN_FM25Q08 0x4014 +#define FUDAN_FM25Q16 0x4015 +#define FUDAN_FM25Q32 0x4016 + #define FUJITSU_ID 0x04 /* Fujitsu */ #define FUJITSU_MBM29DL400BC 0x0F #define FUJITSU_MBM29DL400TC 0x0C