- flashrom-gerrit - mail.coreboot.org

Change in flashrom[master]: programmer_table: convert entries to pointers
by Nico Huber (Code Review) 10 Jun '21

10 Jun '21

Nico Huber has submitted this change. ( https://review.coreboot.org/c/flashrom/+/52945 ) Change subject: programmer_table: convert entries to pointers ...................................................................... programmer_table: convert entries to pointers Allows us to move the individual entries into their respective driver files. Change-Id: Ifbb0ee4db5a85b1cd2afeafe4dca838579f79878 Signed-off-by: Thomas Heijligen <thomas.heijligen(a)secunet.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/52945 Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: Nico Huber <nico.h(a)gmx.de> --- M cli_classic.c M flashrom.c M libflashrom.c M print.c M print_wiki.c M programmer.h M programmer_table.c 7 files changed, 572 insertions(+), 410 deletions(-) Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved diff --git a/cli_classic.c b/cli_classic.c index 5fd8092..bc2d40d 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -407,7 +407,7 @@ "for details.\n"); } for (prog = 0; prog < PROGRAMMER_INVALID; prog++) { - name = programmer_table[prog].name; + name = programmer_table[prog]->name; namelen = strlen(name); if (strncmp(optarg, name, namelen) == 0) { switch (optarg[namelen]) { @@ -545,7 +545,7 @@ /* We need to strdup here because we free(pparam) unconditionally later. */ pparam = strdup(CONFIG_DEFAULT_PROGRAMMER_ARGS); msg_pinfo("Using default programmer \"%s\" with arguments \"%s\".\n", - programmer_table[CONFIG_DEFAULT_PROGRAMMER].name, pparam); + programmer_table[CONFIG_DEFAULT_PROGRAMMER]->name, pparam); } else { msg_perr("Please select a programmer with the --programmer parameter.\n" #if CONFIG_INTERNAL == 1 diff --git a/flashrom.c b/flashrom.c index 9cd1003..f5a39b8 100644 --- a/flashrom.c +++ b/flashrom.c @@ -155,8 +155,8 @@ programmer_may_write = 1; programmer_param = param; - msg_pdbg("Initializing %s programmer\n", programmer_table[programmer].name); - ret = programmer_table[programmer].init(); + msg_pdbg("Initializing %s programmer\n", programmer_table[programmer]->name); + ret = programmer_table[programmer]->init(); if (programmer_param && strlen(programmer_param)) { if (ret != 0) { /* It is quite possible that any unhandled programmer parameter would have been valid, @@ -200,7 +200,7 @@ void *programmer_map_flash_region(const char *descr, uintptr_t phys_addr, size_t len) { - void *ret = programmer_table[programmer].map_flash_region(descr, phys_addr, len); + void *ret = programmer_table[programmer]->map_flash_region(descr, phys_addr, len); msg_gspew("%s: mapping %s from 0x%0*" PRIxPTR " to 0x%0*" PRIxPTR "\n", __func__, descr, PRIxPTR_WIDTH, phys_addr, PRIxPTR_WIDTH, (uintptr_t) ret); return ret; @@ -208,7 +208,7 @@ void programmer_unmap_flash_region(void *virt_addr, size_t len) { - programmer_table[programmer].unmap_flash_region(virt_addr, len); + programmer_table[programmer]->unmap_flash_region(virt_addr, len); msg_gspew("%s: unmapped 0x%0*" PRIxPTR "\n", __func__, PRIxPTR_WIDTH, (uintptr_t)virt_addr); } @@ -256,7 +256,7 @@ void programmer_delay(unsigned int usecs) { if (usecs > 0) - programmer_table[programmer].delay(usecs); + programmer_table[programmer]->delay(usecs); } int read_memmapped(struct flashctx *flash, uint8_t *buf, unsigned int start, @@ -840,12 +840,12 @@ flash->chip->vendor, flash->chip->name, flash->chip->total_size, tmp); free(tmp); #if CONFIG_INTERNAL == 1 - if (programmer_table[programmer].map_flash_region == physmap) + if (programmer_table[programmer]->map_flash_region == physmap) msg_cinfo("mapped at physical address 0x%0*" PRIxPTR ".\n", PRIxPTR_WIDTH, flash->physical_memory); else #endif - msg_cinfo("on %s.\n", programmer_table[programmer].name); + msg_cinfo("on %s.\n", programmer_table[programmer]->name); /* Flash registers may more likely not be mapped if the chip was forced. * Lock info may be stored in registers, so avoid lock info printing. */ @@ -1586,7 +1586,7 @@ int i; for (p = 0; p < PROGRAMMER_INVALID; p++) { - pname = programmer_table[p].name; + pname = programmer_table[p]->name; pnamelen = strlen(pname); if (remaining - pnamelen - 2 < 0) { if (firstline) @@ -1718,45 +1718,50 @@ ret = 1; } for (i = 0; i < PROGRAMMER_INVALID; i++) { - const struct programmer_entry p = programmer_table[i]; - if (p.name == NULL) { + const struct programmer_entry *const p = programmer_table[i]; + if (p == NULL) { + msg_gerr("Programmer with index %d is NULL instead of a valid pointer!\n", i); + ret = 1; + continue; + } + if (p->name == NULL) { msg_gerr("All programmers need a valid name, but the one with index %d does not!\n", i); ret = 1; /* This might hide other problems with this programmer, but allows for better error * messages below without jumping through hoops. */ continue; } - switch (p.type) { + switch (p->type) { case USB: case PCI: case OTHER: - if (p.devs.note == NULL) { - if (strcmp("internal", p.name) == 0) + if (p->devs.note == NULL) { + if (strcmp("internal", p->name) == 0) break; /* This one has its device list stored separately. */ msg_gerr("Programmer %s has neither a device list nor a textual description!\n", - p.name); + p->name); ret = 1; } break; default: - msg_gerr("Programmer %s does not have a valid type set!\n", p.name); + msg_gerr("Programmer %s does not have a valid type set!\n", p->name); ret = 1; break; } - if (p.init == NULL) { - msg_gerr("Programmer %s does not have a valid init function!\n", p.name); + if (p->init == NULL) { + msg_gerr("Programmer %s does not have a valid init function!\n", p->name); ret = 1; } - if (p.delay == NULL) { - msg_gerr("Programmer %s does not have a valid delay function!\n", p.name); + if (p->delay == NULL) { + msg_gerr("Programmer %s does not have a valid delay function!\n", p->name); ret = 1; } - if (p.map_flash_region == NULL) { - msg_gerr("Programmer %s does not have a valid map_flash_region function!\n", p.name); + if (p->map_flash_region == NULL) { + msg_gerr("Programmer %s does not have a valid map_flash_region function!\n", p->name); ret = 1; } - if (p.unmap_flash_region == NULL) { - msg_gerr("Programmer %s does not have a valid unmap_flash_region function!\n", p.name); + if (p->unmap_flash_region == NULL) { + msg_gerr("Programmer %s does not have a valid unmap_flash_region function!\n", p->name); ret = 1; } } diff --git a/libflashrom.c b/libflashrom.c index 23358c9..09a4e4d 100644 --- a/libflashrom.c +++ b/libflashrom.c @@ -124,7 +124,7 @@ if (supported_programmers != NULL) { for (; p < PROGRAMMER_INVALID; ++p) { - supported_programmers[p] = programmer_table[p].name; + supported_programmers[p] = programmer_table[p]->name; } } else { msg_gerr("Memory allocation error!\n"); @@ -279,7 +279,7 @@ unsigned prog; for (prog = 0; prog < PROGRAMMER_INVALID; prog++) { - if (strcmp(prog_name, programmer_table[prog].name) == 0) + if (strcmp(prog_name, programmer_table[prog]->name) == 0) break; } if (prog >= PROGRAMMER_INVALID) { diff --git a/print.c b/print.c index feca45e..77cf3d5 100644 --- a/print.c +++ b/print.c @@ -425,10 +425,10 @@ } #endif -static void print_supported_devs(const struct programmer_entry prog, const char *const type) +static void print_supported_devs(const struct programmer_entry *const prog, const char *const type) { - const struct dev_entry *const devs = prog.devs.dev; - msg_ginfo("\nSupported %s devices for the %s programmer:\n", type, prog.name); + const struct dev_entry *const devs = prog->devs.dev; + msg_ginfo("\nSupported %s devices for the %s programmer:\n", type, prog->name); unsigned int maxvendorlen = strlen("Vendor") + 1; unsigned int maxdevlen = strlen("Device") + 1; @@ -475,7 +475,7 @@ msg_ginfo("\n"); #if CONFIG_INTERNAL == 1 msg_ginfo("\nSupported devices for the %s programmer:\n\n", - programmer_table[PROGRAMMER_INTERNAL].name); + programmer_table[PROGRAMMER_INTERNAL]->name); print_supported_chipsets(); msg_ginfo("\n"); print_supported_boards_helper(boards_known, "mainboards"); @@ -483,8 +483,8 @@ print_supported_boards_helper(laptops_known, "mobile devices"); #endif for (i = 0; i < PROGRAMMER_INVALID; i++) { - const struct programmer_entry prog = programmer_table[i]; - switch (prog.type) { + const struct programmer_entry *const prog = programmer_table[i]; + switch (prog->type) { case USB: print_supported_devs(prog, "USB"); break; @@ -492,14 +492,14 @@ print_supported_devs(prog, "PCI"); break; case OTHER: - if (prog.devs.note != NULL) { - msg_ginfo("\nSupported devices for the %s programmer:\n", prog.name); - msg_ginfo("%s", prog.devs.note); + if (prog->devs.note != NULL) { + msg_ginfo("\nSupported devices for the %s programmer:\n", prog->name); + msg_ginfo("%s", prog->devs.note); } break; default: msg_gerr("\n%s: %s: Uninitialized programmer type! Please report a bug at " - "flashrom(a)flashrom.org\n", __func__, prog.name); + "flashrom(a)flashrom.org\n", __func__, prog->name); break; } } diff --git a/print_wiki.c b/print_wiki.c index b2ac65c..3610135 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -355,11 +355,11 @@ return count; } -static void print_supported_devs_wiki_helper(const struct programmer_entry prog) +static void print_supported_devs_wiki_helper(const struct programmer_entry *const prog) { int i = 0; static int c = 0; - const struct dev_entry *devs = prog.devs.dev; + const struct dev_entry *devs = prog->devs.dev; const unsigned int count = count_supported_devs_wiki(devs); /* Alternate colors if the vendor changes. */ @@ -368,7 +368,7 @@ for (i = 0; devs[i].vendor_id != 0; i++) { printf("|- bgcolor=\"#%s\"\n", (c) ? "eeeeee" : "dddddd"); if (i == 0) - printf("| rowspan=\"%u\" | %s |", count, prog.name); + printf("| rowspan=\"%u\" | %s |", count, prog->name); printf("| %s || %s || %04x:%04x || {{%s}}\n", devs[i].vendor_name, devs[i].device_name, devs[i].vendor_id, devs[i].device_id, test_state_to_template(devs[i].status)); } @@ -381,13 +381,13 @@ unsigned int i; for (i = 0; i < PROGRAMMER_INVALID; i++) { - const struct programmer_entry prog = programmer_table[i]; - switch (prog.type) { + const struct programmer_entry *const prog = programmer_table[i]; + switch (prog->type) { case USB: - usb_count += count_supported_devs_wiki(prog.devs.dev); + usb_count += count_supported_devs_wiki(prog->devs.dev); break; case PCI: - pci_count += count_supported_devs_wiki(prog.devs.dev); + pci_count += count_supported_devs_wiki(prog->devs.dev); break; case OTHER: default: @@ -400,8 +400,8 @@ "{%s%s", pci_count, th_start, programmer_th); for (i = 0; i < PROGRAMMER_INVALID; i++) { - const struct programmer_entry prog = programmer_table[i]; - if (prog.type == PCI) { + const struct programmer_entry *const prog = programmer_table[i]; + if (prog->type == PCI) { print_supported_devs_wiki_helper(prog); } } @@ -412,8 +412,8 @@ "{%s%s", usb_count, th_start, programmer_th); for (i = 0; i < PROGRAMMER_INVALID; i++) { - const struct programmer_entry prog = programmer_table[i]; - if (prog.type == USB) { + const struct programmer_entry *const prog = programmer_table[i]; + if (prog->type == USB) { print_supported_devs_wiki_helper(prog); } } @@ -426,11 +426,11 @@ for (i = 0; i < PROGRAMMER_INVALID; i++) { static int c = 0; - const struct programmer_entry prog = programmer_table[i]; - if (prog.type == OTHER && prog.devs.note != NULL) { + const struct programmer_entry *const prog = programmer_table[i]; + if (prog->type == OTHER && prog->devs.note != NULL) { c = !c; printf("|- bgcolor=\"#%s\"\n", (c) ? "eeeeee" : "dddddd"); - printf("| %s || %s", prog.name, prog.devs.note); + printf("| %s || %s", prog->name, prog->devs.note); } } printf("\n|}\n\n|}\n"); diff --git a/programmer.h b/programmer.h index 945d0a7..324b953 100644 --- a/programmer.h +++ b/programmer.h @@ -175,7 +175,7 @@ void (*delay) (unsigned int usecs); }; -extern const struct programmer_entry programmer_table[]; +extern const struct programmer_entry *const programmer_table[]; extern const size_t programmer_table_size; int programmer_init(enum programmer prog, const char *param); diff --git a/programmer_table.c b/programmer_table.c index 3c6dd58..5c7f0f1 100644 --- a/programmer_table.c +++ b/programmer_table.c @@ -14,479 +14,636 @@ #include "programmer.h" -const struct programmer_entry programmer_table[] = { #if CONFIG_INTERNAL == 1 - { - .name = "internal", - .type = OTHER, - .devs.note = NULL, - .init = internal_init, - .map_flash_region = physmap, - .unmap_flash_region = physunmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_internal = { + .name = "internal", + .type = OTHER, + .devs.note = NULL, + .init = internal_init, + .map_flash_region = physmap, + .unmap_flash_region = physunmap, + .delay = internal_delay, +}; #endif #if CONFIG_DUMMY == 1 - { - .name = "dummy", - .type = OTHER, - /* FIXME */ - .devs.note = "Dummy device, does nothing and logs all accesses\n", - .init = dummy_init, - .map_flash_region = dummy_map, - .unmap_flash_region = dummy_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_dummy = { + .name = "dummy", + .type = OTHER, + /* FIXME */ + .devs.note = "Dummy device, does nothing and logs all accesses\n", + .init = dummy_init, + .map_flash_region = dummy_map, + .unmap_flash_region = dummy_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_MEC1308 == 1 - { - .name = "mec1308", - .type = OTHER, - .devs.note = "Microchip MEC1308 Embedded Controller.\n", - .init = mec1308_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_mec1308 = { + .name = "mec1308", + .type = OTHER, + .devs.note = "Microchip MEC1308 Embedded Controller.\n", + .init = mec1308_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_NIC3COM == 1 - { - .name = "nic3com", - .type = PCI, - .devs.dev = nics_3com, - .init = nic3com_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_nic3com = { + .name = "nic3com", + .type = PCI, + .devs.dev = nics_3com, + .init = nic3com_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_NICREALTEK == 1 - { - /* This programmer works for Realtek RTL8139 and SMC 1211. */ - .name = "nicrealtek", - .type = PCI, - .devs.dev = nics_realtek, - .init = nicrealtek_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_nicrealtek = { + /* This programmer works for Realtek RTL8139 and SMC 1211. */ + .name = "nicrealtek", + .type = PCI, + .devs.dev = nics_realtek, + .init = nicrealtek_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_NICNATSEMI == 1 - { - .name = "nicnatsemi", - .type = PCI, - .devs.dev = nics_natsemi, - .init = nicnatsemi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_nicnatsemi = { + .name = "nicnatsemi", + .type = PCI, + .devs.dev = nics_natsemi, + .init = nicnatsemi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_GFXNVIDIA == 1 - { - .name = "gfxnvidia", - .type = PCI, - .devs.dev = gfx_nvidia, - .init = gfxnvidia_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_gfxnvidia = { + .name = "gfxnvidia", + .type = PCI, + .devs.dev = gfx_nvidia, + .init = gfxnvidia_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_RAIDEN_DEBUG_SPI == 1 - { - .name = "raiden_debug_spi", - .type = USB, - .devs.dev = devs_raiden, - .init = raiden_debug_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_raiden_debug_spi = { + .name = "raiden_debug_spi", + .type = USB, + .devs.dev = devs_raiden, + .init = raiden_debug_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_DRKAISER == 1 - { - .name = "drkaiser", - .type = PCI, - .devs.dev = drkaiser_pcidev, - .init = drkaiser_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_drkaiser = { + .name = "drkaiser", + .type = PCI, + .devs.dev = drkaiser_pcidev, + .init = drkaiser_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_SATASII == 1 - { - .name = "satasii", - .type = PCI, - .devs.dev = satas_sii, - .init = satasii_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_satasii = { + .name = "satasii", + .type = PCI, + .devs.dev = satas_sii, + .init = satasii_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_ATAHPT == 1 - { - .name = "atahpt", - .type = PCI, - .devs.dev = ata_hpt, - .init = atahpt_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_atahpt = { + .name = "atahpt", + .type = PCI, + .devs.dev = ata_hpt, + .init = atahpt_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_ATAVIA == 1 - { - .name = "atavia", - .type = PCI, - .devs.dev = ata_via, - .init = atavia_init, - .map_flash_region = atavia_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_atavia = { + .name = "atavia", + .type = PCI, + .devs.dev = ata_via, + .init = atavia_init, + .map_flash_region = atavia_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_ATAPROMISE == 1 - { - .name = "atapromise", - .type = PCI, - .devs.dev = ata_promise, - .init = atapromise_init, - .map_flash_region = atapromise_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_atapromise = { + .name = "atapromise", + .type = PCI, + .devs.dev = ata_promise, + .init = atapromise_init, + .map_flash_region = atapromise_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_IT8212 == 1 - { - .name = "it8212", - .type = PCI, - .devs.dev = devs_it8212, - .init = it8212_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_it8212 = { + .name = "it8212", + .type = PCI, + .devs.dev = devs_it8212, + .init = it8212_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_FT2232_SPI == 1 - { - .name = "ft2232_spi", - .type = USB, - .devs.dev = devs_ft2232spi, - .init = ft2232_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_ft2232_spi = { + .name = "ft2232_spi", + .type = USB, + .devs.dev = devs_ft2232spi, + .init = ft2232_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_SERPROG == 1 - { - .name = "serprog", - .type = OTHER, - /* FIXME */ - .devs.note = "All programmer devices speaking the serprog protocol\n", - .init = serprog_init, - .map_flash_region = serprog_map, - .unmap_flash_region = fallback_unmap, - .delay = serprog_delay, - }, +const struct programmer_entry programmer_serprog = { + .name = "serprog", + .type = OTHER, + /* FIXME */ + .devs.note = "All programmer devices speaking the serprog protocol\n", + .init = serprog_init, + .map_flash_region = serprog_map, + .unmap_flash_region = fallback_unmap, + .delay = serprog_delay, +}; #endif #if CONFIG_BUSPIRATE_SPI == 1 - { - .name = "buspirate_spi", - .type = OTHER, - /* FIXME */ - .devs.note = "Dangerous Prototypes Bus Pirate\n", - .init = buspirate_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_buspirate_spi = { + .name = "buspirate_spi", + .type = OTHER, + /* FIXME */ + .devs.note = "Dangerous Prototypes Bus Pirate\n", + .init = buspirate_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_DEDIPROG == 1 - { - .name = "dediprog", - .type = USB, - .devs.dev = devs_dediprog, - .init = dediprog_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_dediprog = { + .name = "dediprog", + .type = USB, + .devs.dev = devs_dediprog, + .init = dediprog_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_DEVELOPERBOX_SPI == 1 - { - .name = "developerbox", - .type = USB, - .devs.dev = devs_developerbox_spi, - .init = developerbox_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_developerbox = { + .name = "developerbox", + .type = USB, + .devs.dev = devs_developerbox_spi, + .init = developerbox_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_ENE_LPC == 1 - { - .name = "ene_lpc", - .type = OTHER, - .devs.note = "ENE LPC interface keyboard controller\n", - .init = ene_lpc_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_ene_lpc = { + .name = "ene_lpc", + .type = OTHER, + .devs.note = "ENE LPC interface keyboard controller\n", + .init = ene_lpc_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_RAYER_SPI == 1 - { - .name = "rayer_spi", - .type = OTHER, - /* FIXME */ - .devs.note = "RayeR parallel port programmer\n", - .init = rayer_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_rayer_spi = { + .name = "rayer_spi", + .type = OTHER, + /* FIXME */ + .devs.note = "RayeR parallel port programmer\n", + .init = rayer_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_PONY_SPI == 1 - { - .name = "pony_spi", - .type = OTHER, - /* FIXME */ - .devs.note = "Programmers compatible with SI-Prog, serbang or AJAWe\n", - .init = pony_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_pony_spi = { + .name = "pony_spi", + .type = OTHER, + /* FIXME */ + .devs.note = "Programmers compatible with SI-Prog, serbang or AJAWe\n", + .init = pony_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_NICINTEL == 1 - { - .name = "nicintel", - .type = PCI, - .devs.dev = nics_intel, - .init = nicintel_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_nicintel = { + .name = "nicintel", + .type = PCI, + .devs.dev = nics_intel, + .init = nicintel_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_NICINTEL_SPI == 1 - { - .name = "nicintel_spi", - .type = PCI, - .devs.dev = nics_intel_spi, - .init = nicintel_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_nicintel_spi = { + .name = "nicintel_spi", + .type = PCI, + .devs.dev = nics_intel_spi, + .init = nicintel_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_NICINTEL_EEPROM == 1 - { - .name = "nicintel_eeprom", - .type = PCI, - .devs.dev = nics_intel_ee, - .init = nicintel_ee_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_nicintel_eeprom = { + .name = "nicintel_eeprom", + .type = PCI, + .devs.dev = nics_intel_ee, + .init = nicintel_ee_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_OGP_SPI == 1 - { - .name = "ogp_spi", - .type = PCI, - .devs.dev = ogp_spi, - .init = ogp_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_ogp_spi = { + .name = "ogp_spi", + .type = PCI, + .devs.dev = ogp_spi, + .init = ogp_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_SATAMV == 1 - { - .name = "satamv", - .type = PCI, - .devs.dev = satas_mv, - .init = satamv_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_satamv = { + .name = "satamv", + .type = PCI, + .devs.dev = satas_mv, + .init = satamv_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_LINUX_MTD == 1 - { - .name = "linux_mtd", - .type = OTHER, - .devs.note = "Device files /dev/mtd*\n", - .init = linux_mtd_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_linux_mtd = { + .name = "linux_mtd", + .type = OTHER, + .devs.note = "Device files /dev/mtd*\n", + .init = linux_mtd_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_LINUX_SPI == 1 - { - .name = "linux_spi", - .type = OTHER, - .devs.note = "Device files /dev/spidev*.*\n", - .init = linux_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_linux_spi = { + .name = "linux_spi", + .type = OTHER, + .devs.note = "Device files /dev/spidev*.*\n", + .init = linux_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_LSPCON_I2C_SPI == 1 - { - .name = "lspcon_i2c_spi", - .type = OTHER, - .devs.note = "Device files /dev/i2c-*.\n", - .init = lspcon_i2c_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_lspcon_i2c_spi = { + .name = "lspcon_i2c_spi", + .type = OTHER, + .devs.note = "Device files /dev/i2c-*.\n", + .init = lspcon_i2c_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_REALTEK_MST_I2C_SPI == 1 - { - .name = "realtek_mst_i2c_spi", - .type = OTHER, - .devs.note = "Device files /dev/i2c-*.\n", - .init = realtek_mst_i2c_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_realtek_mst_i2c_spi = { + .name = "realtek_mst_i2c_spi", + .type = OTHER, + .devs.note = "Device files /dev/i2c-*.\n", + .init = realtek_mst_i2c_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_USBBLASTER_SPI == 1 - { - .name = "usbblaster_spi", - .type = USB, - .devs.dev = devs_usbblasterspi, - .init = usbblaster_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_usbblaster_spi = { + .name = "usbblaster_spi", + .type = USB, + .devs.dev = devs_usbblasterspi, + .init = usbblaster_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_MSTARDDC_SPI == 1 - { - .name = "mstarddc_spi", - .type = OTHER, - .devs.note = "MSTAR DDC devices addressable via /dev/i2c-* on Linux.\n", - .init = mstarddc_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_mstarddc_spi = { + .name = "mstarddc_spi", + .type = OTHER, + .devs.note = "MSTAR DDC devices addressable via /dev/i2c-* on Linux.\n", + .init = mstarddc_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_PICKIT2_SPI == 1 - { - .name = "pickit2_spi", - .type = USB, - .devs.dev = devs_pickit2_spi, - .init = pickit2_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_pickit2_spi = { + .name = "pickit2_spi", + .type = USB, + .devs.dev = devs_pickit2_spi, + .init = pickit2_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_CH341A_SPI == 1 - { - .name = "ch341a_spi", - .type = USB, - .devs.dev = devs_ch341a_spi, - .init = ch341a_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = ch341a_spi_delay, - }, +const struct programmer_entry programmer_ch341a_spi = { + .name = "ch341a_spi", + .type = USB, + .devs.dev = devs_ch341a_spi, + .init = ch341a_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = ch341a_spi_delay, +}; #endif #if CONFIG_DIGILENT_SPI == 1 - { - .name = "digilent_spi", - .type = USB, - .devs.dev = devs_digilent_spi, - .init = digilent_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_digilent_spi = { + .name = "digilent_spi", + .type = USB, + .devs.dev = devs_digilent_spi, + .init = digilent_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_JLINK_SPI == 1 - { - .name = "jlink_spi", - .type = OTHER, - .init = jlink_spi_init, - .devs.note = "SEGGER J-Link and compatible devices\n", - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_jlink_spi = { + .name = "jlink_spi", + .type = OTHER, + .init = jlink_spi_init, + .devs.note = "SEGGER J-Link and compatible devices\n", + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_NI845X_SPI == 1 - { - .name = "ni845x_spi", - .type = OTHER, // choose other because NI-845x uses own USB implementation - .devs.note = "National Instruments USB-845x\n", - .init = ni845x_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_ni845x_spi = { + .name = "ni845x_spi", + .type = OTHER, // choose other because NI-845x uses own USB implementation + .devs.note = "National Instruments USB-845x\n", + .init = ni845x_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; #endif #if CONFIG_STLINKV3_SPI == 1 - { - .name = "stlinkv3_spi", - .type = USB, - .devs.dev = devs_stlinkv3_spi, - .init = stlinkv3_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, +const struct programmer_entry programmer_stlinkv3_spi = { + .name = "stlinkv3_spi", + .type = USB, + .devs.dev = devs_stlinkv3_spi, + .init = stlinkv3_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}; +#endif + +const struct programmer_entry *const programmer_table[] = { + +#if CONFIG_INTERNAL == 1 + &programmer_internal, +#endif + +#if CONFIG_DUMMY == 1 + &programmer_dummy, +#endif + +#if CONFIG_MEC1308 == 1 + &programmer_mec1308, +#endif + +#if CONFIG_NIC3COM == 1 + &programmer_nic3com, +#endif + +#if CONFIG_NICREALTEK == 1 + & programmer_nicrealtek, +#endif + +#if CONFIG_NICNATSEMI == 1 + &programmer_nicnatsemi, +#endif + +#if CONFIG_GFXNVIDIA == 1 + &programmer_gfxnvidia, +#endif + +#if CONFIG_RAIDEN_DEBUG_SPI == 1 + &programmer_raiden_debug_spi, +#endif + +#if CONFIG_DRKAISER == 1 + &programmer_drkaiser, +#endif + +#if CONFIG_SATASII == 1 + &programmer_satasii, +#endif + +#if CONFIG_ATAHPT == 1 + &programmer_atahpt, +#endif + +#if CONFIG_ATAVIA == 1 + &programmer_atavia, +#endif + +#if CONFIG_ATAPROMISE == 1 + &programmer_atapromise, +#endif + +#if CONFIG_IT8212 == 1 + &programmer_it8212, +#endif + +#if CONFIG_FT2232_SPI == 1 + &programmer_ft2232_spi, +#endif + +#if CONFIG_SERPROG == 1 + &programmer_serprog, +#endif + +#if CONFIG_BUSPIRATE_SPI == 1 + &programmer_buspirate_spi, +#endif + +#if CONFIG_DEDIPROG == 1 + &programmer_dediprog, +#endif + +#if CONFIG_DEVELOPERBOX_SPI == 1 + &programmer_developerbox, +#endif + +#if CONFIG_ENE_LPC == 1 + &programmer_ene_lpc, +#endif + +#if CONFIG_RAYER_SPI == 1 + &programmer_rayer_spi, +#endif + +#if CONFIG_PONY_SPI == 1 + &programmer_pony_spi, +#endif + +#if CONFIG_NICINTEL == 1 + &programmer_nicintel, +#endif + +#if CONFIG_NICINTEL_SPI == 1 + &programmer_nicintel_spi, +#endif + +#if CONFIG_NICINTEL_EEPROM == 1 + &programmer_nicintel_eeprom, +#endif + +#if CONFIG_OGP_SPI == 1 + &programmer_ogp_spi, +#endif + +#if CONFIG_SATAMV == 1 + &programmer_satamv, +#endif + +#if CONFIG_LINUX_MTD == 1 + &programmer_linux_mtd, +#endif + +#if CONFIG_LINUX_SPI == 1 + &programmer_linux_spi, +#endif + +#if CONFIG_LSPCON_I2C_SPI == 1 + &programmer_lspcon_i2c_spi, +#endif + +#if CONFIG_REALTEK_MST_I2C_SPI == 1 + &programmer_realtek_mst_i2c_spi, +#endif + +#if CONFIG_USBBLASTER_SPI == 1 + &programmer_usbblaster_spi, +#endif + +#if CONFIG_MSTARDDC_SPI == 1 + &programmer_mstarddc_spi, +#endif + +#if CONFIG_PICKIT2_SPI == 1 + &programmer_pickit2_spi, +#endif + +#if CONFIG_CH341A_SPI == 1 + &programmer_ch341a_spi, +#endif + +#if CONFIG_DIGILENT_SPI == 1 + &programmer_digilent_spi, +#endif + +#if CONFIG_JLINK_SPI == 1 + &programmer_jlink_spi, +#endif + +#if CONFIG_NI845X_SPI == 1 + &programmer_ni845x_spi, +#endif + +#if CONFIG_STLINKV3_SPI == 1 + &programmer_stlinkv3_spi, #endif }; -- To view, visit https://review.coreboot.org/c/flashrom/+/52945 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ifbb0ee4db5a85b1cd2afeafe4dca838579f79878 Gerrit-Change-Number: 52945 Gerrit-PatchSet: 7 Gerrit-Owner: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-CC: Xiang W <wxjstz(a)126.com> Gerrit-MessageType: merged

1 0

Change in flashrom[master]: programmer_table: move array content to an own file
by Nico Huber (Code Review) 10 Jun '21

10 Jun '21

Nico Huber has submitted this change. ( https://review.coreboot.org/c/flashrom/+/52944 ) Change subject: programmer_table: move array content to an own file ...................................................................... programmer_table: move array content to an own file Change-Id: I8e6d704e845ee4152c8676dd19dff0934fff007b Signed-off-by: Thomas Heijligen <thomas.heijligen(a)secunet.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/52944 Reviewed-by: Nico Huber <nico.h(a)gmx.de> Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> --- M Makefile M flashrom.c M meson.build A programmer_table.c 4 files changed, 495 insertions(+), 479 deletions(-) Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved diff --git a/Makefile b/Makefile index b8b40ca..4eb4191 100644 --- a/Makefile +++ b/Makefile @@ -633,7 +633,7 @@ ############################################################################### # Library code. -LIB_OBJS = libflashrom.o layout.o flashrom.o udelay.o programmer.o helpers.o ich_descriptors.o fmap.o +LIB_OBJS = libflashrom.o layout.o flashrom.o udelay.o programmer.o programmer_table.o helpers.o ich_descriptors.o fmap.o ############################################################################### # Frontend related stuff. diff --git a/flashrom.c b/flashrom.c index 43a5599..9cd1003 100644 --- a/flashrom.c +++ b/flashrom.c @@ -58,484 +58,6 @@ /* Is writing allowed with this programmer? */ int programmer_may_write; -const struct programmer_entry programmer_table[] = { -#if CONFIG_INTERNAL == 1 - { - .name = "internal", - .type = OTHER, - .devs.note = NULL, - .init = internal_init, - .map_flash_region = physmap, - .unmap_flash_region = physunmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_DUMMY == 1 - { - .name = "dummy", - .type = OTHER, - /* FIXME */ - .devs.note = "Dummy device, does nothing and logs all accesses\n", - .init = dummy_init, - .map_flash_region = dummy_map, - .unmap_flash_region = dummy_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_MEC1308 == 1 - { - .name = "mec1308", - .type = OTHER, - .devs.note = "Microchip MEC1308 Embedded Controller.\n", - .init = mec1308_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NIC3COM == 1 - { - .name = "nic3com", - .type = PCI, - .devs.dev = nics_3com, - .init = nic3com_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NICREALTEK == 1 - { - /* This programmer works for Realtek RTL8139 and SMC 1211. */ - .name = "nicrealtek", - .type = PCI, - .devs.dev = nics_realtek, - .init = nicrealtek_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NICNATSEMI == 1 - { - .name = "nicnatsemi", - .type = PCI, - .devs.dev = nics_natsemi, - .init = nicnatsemi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_GFXNVIDIA == 1 - { - .name = "gfxnvidia", - .type = PCI, - .devs.dev = gfx_nvidia, - .init = gfxnvidia_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_RAIDEN_DEBUG_SPI == 1 - { - .name = "raiden_debug_spi", - .type = USB, - .devs.dev = devs_raiden, - .init = raiden_debug_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_DRKAISER == 1 - { - .name = "drkaiser", - .type = PCI, - .devs.dev = drkaiser_pcidev, - .init = drkaiser_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_SATASII == 1 - { - .name = "satasii", - .type = PCI, - .devs.dev = satas_sii, - .init = satasii_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_ATAHPT == 1 - { - .name = "atahpt", - .type = PCI, - .devs.dev = ata_hpt, - .init = atahpt_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_ATAVIA == 1 - { - .name = "atavia", - .type = PCI, - .devs.dev = ata_via, - .init = atavia_init, - .map_flash_region = atavia_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_ATAPROMISE == 1 - { - .name = "atapromise", - .type = PCI, - .devs.dev = ata_promise, - .init = atapromise_init, - .map_flash_region = atapromise_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_IT8212 == 1 - { - .name = "it8212", - .type = PCI, - .devs.dev = devs_it8212, - .init = it8212_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_FT2232_SPI == 1 - { - .name = "ft2232_spi", - .type = USB, - .devs.dev = devs_ft2232spi, - .init = ft2232_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_SERPROG == 1 - { - .name = "serprog", - .type = OTHER, - /* FIXME */ - .devs.note = "All programmer devices speaking the serprog protocol\n", - .init = serprog_init, - .map_flash_region = serprog_map, - .unmap_flash_region = fallback_unmap, - .delay = serprog_delay, - }, -#endif - -#if CONFIG_BUSPIRATE_SPI == 1 - { - .name = "buspirate_spi", - .type = OTHER, - /* FIXME */ - .devs.note = "Dangerous Prototypes Bus Pirate\n", - .init = buspirate_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_DEDIPROG == 1 - { - .name = "dediprog", - .type = USB, - .devs.dev = devs_dediprog, - .init = dediprog_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_DEVELOPERBOX_SPI == 1 - { - .name = "developerbox", - .type = USB, - .devs.dev = devs_developerbox_spi, - .init = developerbox_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_ENE_LPC == 1 - { - .name = "ene_lpc", - .type = OTHER, - .devs.note = "ENE LPC interface keyboard controller\n", - .init = ene_lpc_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_RAYER_SPI == 1 - { - .name = "rayer_spi", - .type = OTHER, - /* FIXME */ - .devs.note = "RayeR parallel port programmer\n", - .init = rayer_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_PONY_SPI == 1 - { - .name = "pony_spi", - .type = OTHER, - /* FIXME */ - .devs.note = "Programmers compatible with SI-Prog, serbang or AJAWe\n", - .init = pony_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NICINTEL == 1 - { - .name = "nicintel", - .type = PCI, - .devs.dev = nics_intel, - .init = nicintel_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NICINTEL_SPI == 1 - { - .name = "nicintel_spi", - .type = PCI, - .devs.dev = nics_intel_spi, - .init = nicintel_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NICINTEL_EEPROM == 1 - { - .name = "nicintel_eeprom", - .type = PCI, - .devs.dev = nics_intel_ee, - .init = nicintel_ee_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_OGP_SPI == 1 - { - .name = "ogp_spi", - .type = PCI, - .devs.dev = ogp_spi, - .init = ogp_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_SATAMV == 1 - { - .name = "satamv", - .type = PCI, - .devs.dev = satas_mv, - .init = satamv_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_LINUX_MTD == 1 - { - .name = "linux_mtd", - .type = OTHER, - .devs.note = "Device files /dev/mtd*\n", - .init = linux_mtd_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_LINUX_SPI == 1 - { - .name = "linux_spi", - .type = OTHER, - .devs.note = "Device files /dev/spidev*.*\n", - .init = linux_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_LSPCON_I2C_SPI == 1 - { - .name = "lspcon_i2c_spi", - .type = OTHER, - .devs.note = "Device files /dev/i2c-*.\n", - .init = lspcon_i2c_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_REALTEK_MST_I2C_SPI == 1 - { - .name = "realtek_mst_i2c_spi", - .type = OTHER, - .devs.note = "Device files /dev/i2c-*.\n", - .init = realtek_mst_i2c_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_USBBLASTER_SPI == 1 - { - .name = "usbblaster_spi", - .type = USB, - .devs.dev = devs_usbblasterspi, - .init = usbblaster_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_MSTARDDC_SPI == 1 - { - .name = "mstarddc_spi", - .type = OTHER, - .devs.note = "MSTAR DDC devices addressable via /dev/i2c-* on Linux.\n", - .init = mstarddc_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_PICKIT2_SPI == 1 - { - .name = "pickit2_spi", - .type = USB, - .devs.dev = devs_pickit2_spi, - .init = pickit2_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_CH341A_SPI == 1 - { - .name = "ch341a_spi", - .type = USB, - .devs.dev = devs_ch341a_spi, - .init = ch341a_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = ch341a_spi_delay, - }, -#endif - -#if CONFIG_DIGILENT_SPI == 1 - { - .name = "digilent_spi", - .type = USB, - .devs.dev = devs_digilent_spi, - .init = digilent_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_JLINK_SPI == 1 - { - .name = "jlink_spi", - .type = OTHER, - .init = jlink_spi_init, - .devs.note = "SEGGER J-Link and compatible devices\n", - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NI845X_SPI == 1 - { - .name = "ni845x_spi", - .type = OTHER, // choose other because NI-845x uses own USB implementation - .devs.note = "National Instruments USB-845x\n", - .init = ni845x_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_STLINKV3_SPI == 1 - { - .name = "stlinkv3_spi", - .type = USB, - .devs.dev = devs_stlinkv3_spi, - .init = stlinkv3_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif -}; - -const size_t programmer_table_size = ARRAY_SIZE(programmer_table); - #define SHUTDOWN_MAXFN 32 static int shutdown_fn_count = 0; /** @private */ diff --git a/meson.build b/meson.build index 8ff08b1..0017071 100644 --- a/meson.build +++ b/meson.build @@ -361,6 +361,7 @@ srcs += 'opaque.c' srcs += 'print.c' srcs += 'programmer.c' +srcs += 'programmer_table.c' srcs += 's25f.c' srcs += 'sfdp.c' srcs += 'spi25.c' diff --git a/programmer_table.c b/programmer_table.c new file mode 100644 index 0000000..3c6dd58 --- /dev/null +++ b/programmer_table.c @@ -0,0 +1,493 @@ +/* + * This file is part of the flashrom project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "programmer.h" + +const struct programmer_entry programmer_table[] = { +#if CONFIG_INTERNAL == 1 + { + .name = "internal", + .type = OTHER, + .devs.note = NULL, + .init = internal_init, + .map_flash_region = physmap, + .unmap_flash_region = physunmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_DUMMY == 1 + { + .name = "dummy", + .type = OTHER, + /* FIXME */ + .devs.note = "Dummy device, does nothing and logs all accesses\n", + .init = dummy_init, + .map_flash_region = dummy_map, + .unmap_flash_region = dummy_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_MEC1308 == 1 + { + .name = "mec1308", + .type = OTHER, + .devs.note = "Microchip MEC1308 Embedded Controller.\n", + .init = mec1308_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NIC3COM == 1 + { + .name = "nic3com", + .type = PCI, + .devs.dev = nics_3com, + .init = nic3com_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NICREALTEK == 1 + { + /* This programmer works for Realtek RTL8139 and SMC 1211. */ + .name = "nicrealtek", + .type = PCI, + .devs.dev = nics_realtek, + .init = nicrealtek_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NICNATSEMI == 1 + { + .name = "nicnatsemi", + .type = PCI, + .devs.dev = nics_natsemi, + .init = nicnatsemi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_GFXNVIDIA == 1 + { + .name = "gfxnvidia", + .type = PCI, + .devs.dev = gfx_nvidia, + .init = gfxnvidia_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_RAIDEN_DEBUG_SPI == 1 + { + .name = "raiden_debug_spi", + .type = USB, + .devs.dev = devs_raiden, + .init = raiden_debug_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_DRKAISER == 1 + { + .name = "drkaiser", + .type = PCI, + .devs.dev = drkaiser_pcidev, + .init = drkaiser_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_SATASII == 1 + { + .name = "satasii", + .type = PCI, + .devs.dev = satas_sii, + .init = satasii_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_ATAHPT == 1 + { + .name = "atahpt", + .type = PCI, + .devs.dev = ata_hpt, + .init = atahpt_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_ATAVIA == 1 + { + .name = "atavia", + .type = PCI, + .devs.dev = ata_via, + .init = atavia_init, + .map_flash_region = atavia_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_ATAPROMISE == 1 + { + .name = "atapromise", + .type = PCI, + .devs.dev = ata_promise, + .init = atapromise_init, + .map_flash_region = atapromise_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_IT8212 == 1 + { + .name = "it8212", + .type = PCI, + .devs.dev = devs_it8212, + .init = it8212_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_FT2232_SPI == 1 + { + .name = "ft2232_spi", + .type = USB, + .devs.dev = devs_ft2232spi, + .init = ft2232_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_SERPROG == 1 + { + .name = "serprog", + .type = OTHER, + /* FIXME */ + .devs.note = "All programmer devices speaking the serprog protocol\n", + .init = serprog_init, + .map_flash_region = serprog_map, + .unmap_flash_region = fallback_unmap, + .delay = serprog_delay, + }, +#endif + +#if CONFIG_BUSPIRATE_SPI == 1 + { + .name = "buspirate_spi", + .type = OTHER, + /* FIXME */ + .devs.note = "Dangerous Prototypes Bus Pirate\n", + .init = buspirate_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_DEDIPROG == 1 + { + .name = "dediprog", + .type = USB, + .devs.dev = devs_dediprog, + .init = dediprog_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_DEVELOPERBOX_SPI == 1 + { + .name = "developerbox", + .type = USB, + .devs.dev = devs_developerbox_spi, + .init = developerbox_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_ENE_LPC == 1 + { + .name = "ene_lpc", + .type = OTHER, + .devs.note = "ENE LPC interface keyboard controller\n", + .init = ene_lpc_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_RAYER_SPI == 1 + { + .name = "rayer_spi", + .type = OTHER, + /* FIXME */ + .devs.note = "RayeR parallel port programmer\n", + .init = rayer_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_PONY_SPI == 1 + { + .name = "pony_spi", + .type = OTHER, + /* FIXME */ + .devs.note = "Programmers compatible with SI-Prog, serbang or AJAWe\n", + .init = pony_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NICINTEL == 1 + { + .name = "nicintel", + .type = PCI, + .devs.dev = nics_intel, + .init = nicintel_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NICINTEL_SPI == 1 + { + .name = "nicintel_spi", + .type = PCI, + .devs.dev = nics_intel_spi, + .init = nicintel_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NICINTEL_EEPROM == 1 + { + .name = "nicintel_eeprom", + .type = PCI, + .devs.dev = nics_intel_ee, + .init = nicintel_ee_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_OGP_SPI == 1 + { + .name = "ogp_spi", + .type = PCI, + .devs.dev = ogp_spi, + .init = ogp_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_SATAMV == 1 + { + .name = "satamv", + .type = PCI, + .devs.dev = satas_mv, + .init = satamv_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_LINUX_MTD == 1 + { + .name = "linux_mtd", + .type = OTHER, + .devs.note = "Device files /dev/mtd*\n", + .init = linux_mtd_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_LINUX_SPI == 1 + { + .name = "linux_spi", + .type = OTHER, + .devs.note = "Device files /dev/spidev*.*\n", + .init = linux_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_LSPCON_I2C_SPI == 1 + { + .name = "lspcon_i2c_spi", + .type = OTHER, + .devs.note = "Device files /dev/i2c-*.\n", + .init = lspcon_i2c_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_REALTEK_MST_I2C_SPI == 1 + { + .name = "realtek_mst_i2c_spi", + .type = OTHER, + .devs.note = "Device files /dev/i2c-*.\n", + .init = realtek_mst_i2c_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_USBBLASTER_SPI == 1 + { + .name = "usbblaster_spi", + .type = USB, + .devs.dev = devs_usbblasterspi, + .init = usbblaster_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_MSTARDDC_SPI == 1 + { + .name = "mstarddc_spi", + .type = OTHER, + .devs.note = "MSTAR DDC devices addressable via /dev/i2c-* on Linux.\n", + .init = mstarddc_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_PICKIT2_SPI == 1 + { + .name = "pickit2_spi", + .type = USB, + .devs.dev = devs_pickit2_spi, + .init = pickit2_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_CH341A_SPI == 1 + { + .name = "ch341a_spi", + .type = USB, + .devs.dev = devs_ch341a_spi, + .init = ch341a_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = ch341a_spi_delay, + }, +#endif + +#if CONFIG_DIGILENT_SPI == 1 + { + .name = "digilent_spi", + .type = USB, + .devs.dev = devs_digilent_spi, + .init = digilent_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_JLINK_SPI == 1 + { + .name = "jlink_spi", + .type = OTHER, + .init = jlink_spi_init, + .devs.note = "SEGGER J-Link and compatible devices\n", + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NI845X_SPI == 1 + { + .name = "ni845x_spi", + .type = OTHER, // choose other because NI-845x uses own USB implementation + .devs.note = "National Instruments USB-845x\n", + .init = ni845x_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_STLINKV3_SPI == 1 + { + .name = "stlinkv3_spi", + .type = USB, + .devs.dev = devs_stlinkv3_spi, + .init = stlinkv3_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif +}; + +const size_t programmer_table_size = ARRAY_SIZE(programmer_table); \ No newline at end of file -- To view, visit https://review.coreboot.org/c/flashrom/+/52944 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I8e6d704e845ee4152c8676dd19dff0934fff007b Gerrit-Change-Number: 52944 Gerrit-PatchSet: 6 Gerrit-Owner: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Angel Pons <th3fanbus(a)gmail.com> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-CC: Xiang W <wxjstz(a)126.com> Gerrit-MessageType: merged

1 0

Change in flashrom[master]: programmer_table: add table size constant
by Nico Huber (Code Review) 10 Jun '21

10 Jun '21

Nico Huber has submitted this change. ( https://review.coreboot.org/c/flashrom/+/55116 ) Change subject: programmer_table: add table size constant ...................................................................... programmer_table: add table size constant Makes the array size known to other compilation units. Change-Id: Idacb4b7b0dd98af8bc7cbecf567d33daafb4b24d Signed-off-by: Thomas Heijligen <thomas.heijligen(a)secunet.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/55116 Reviewed-by: Nico Huber <nico.h(a)gmx.de> Reviewed-by: Edward O'Callaghan <quasisec(a)chromium.org> Reviewed-by: Anastasia Klimchuk <aklm(a)chromium.org> Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> --- M flashrom.c M programmer.h 2 files changed, 4 insertions(+), 1 deletion(-) Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved Edward O'Callaghan: Looks good to me, approved Anastasia Klimchuk: Looks good to me, but someone else must approve diff --git a/flashrom.c b/flashrom.c index 65f7e73..43a5599 100644 --- a/flashrom.c +++ b/flashrom.c @@ -534,6 +534,8 @@ #endif }; +const size_t programmer_table_size = ARRAY_SIZE(programmer_table); + #define SHUTDOWN_MAXFN 32 static int shutdown_fn_count = 0; /** @private */ @@ -2189,7 +2191,7 @@ /* Safety check. Instead of aborting after the first error, check * if more errors exist. */ - if (ARRAY_SIZE(programmer_table) != PROGRAMMER_INVALID) { + if (programmer_table_size != PROGRAMMER_INVALID) { msg_gerr("Programmer table miscompilation!\n"); ret = 1; } diff --git a/programmer.h b/programmer.h index a0ff6bc..945d0a7 100644 --- a/programmer.h +++ b/programmer.h @@ -176,6 +176,7 @@ }; extern const struct programmer_entry programmer_table[]; +extern const size_t programmer_table_size; int programmer_init(enum programmer prog, const char *param); int programmer_shutdown(void); -- To view, visit https://review.coreboot.org/c/flashrom/+/55116 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Idacb4b7b0dd98af8bc7cbecf567d33daafb4b24d Gerrit-Change-Number: 55116 Gerrit-PatchSet: 5 Gerrit-Owner: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-CC: Xiang W <wxjstz(a)126.com> Gerrit-MessageType: merged

1 0

Change in flashrom[master]: programmer_table: remove null termination
by Nico Huber (Code Review) 10 Jun '21

10 Jun '21

Nico Huber has submitted this change. ( https://review.coreboot.org/c/flashrom/+/55115 ) Change subject: programmer_table: remove null termination ...................................................................... programmer_table: remove null termination The {0} object at the end of programmer_table which corresponds to PROGRAMMER_INVALID has no use in current code. Change-Id: Ib63c2d2941f23a0788e26e5a5feb25d8669acb42 Signed-off-by: Thomas Heijligen <thomas.heijligen(a)secunet.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/55115 Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: Nico Huber <nico.h(a)gmx.de> --- M flashrom.c 1 file changed, 1 insertion(+), 3 deletions(-) Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved diff --git a/flashrom.c b/flashrom.c index 0af5057..65f7e73 100644 --- a/flashrom.c +++ b/flashrom.c @@ -532,8 +532,6 @@ .delay = internal_delay, }, #endif - - {0}, /* This entry corresponds to PROGRAMMER_INVALID. */ }; #define SHUTDOWN_MAXFN 32 @@ -2191,7 +2189,7 @@ /* Safety check. Instead of aborting after the first error, check * if more errors exist. */ - if (ARRAY_SIZE(programmer_table) - 1 != PROGRAMMER_INVALID) { + if (ARRAY_SIZE(programmer_table) != PROGRAMMER_INVALID) { msg_gerr("Programmer table miscompilation!\n"); ret = 1; } -- To view, visit https://review.coreboot.org/c/flashrom/+/55115 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ib63c2d2941f23a0788e26e5a5feb25d8669acb42 Gerrit-Change-Number: 55115 Gerrit-PatchSet: 4 Gerrit-Owner: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Xiang W <wxjstz(a)126.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-MessageType: merged

1 0

Change in flashrom[master]: libflashrom: remove flashrom_supported_programmers
by Angel Pons (Code Review) 10 Jun '21

10 Jun '21

Attention is currently required from: Nico Huber, Michał Żygowski, ?ukasz Dmitrowski, David Hendricks, Thomas Heijligen, Piotr Król. Angel Pons has posted comments on this change. ( https://review.coreboot.org/c/flashrom/+/55350 ) Change subject: libflashrom: remove flashrom_supported_programmers ...................................................................... Patch Set 1: Code-Review+2 (1 comment) Commit Message: https://review.coreboot.org/c/flashrom/+/55350/comment/e820949e_195522ee PS1, Line 9: const char **flashrom_supported_programmers(void) returns an array of : strings without returning the array size or making a NULL : termination. > It does, but I would still like to get rid of this API. There are other […] Ack -- To view, visit https://review.coreboot.org/c/flashrom/+/55350 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I0157926a654e337c14d840dd398e5576471c304f Gerrit-Change-Number: 55350 Gerrit-PatchSet: 1 Gerrit-Owner: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: ?ukasz Dmitrowski <lukasz.dmitrowski(a)gmail.com> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Piotr Król <piotr.krol(a)3mdeb.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Nico Huber <nico.h(a)gmx.de> Gerrit-Attention: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Attention: ?ukasz Dmitrowski <lukasz.dmitrowski(a)gmail.com> Gerrit-Attention: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Attention: Thomas Heijligen <src(a)posteo.de> Gerrit-Attention: Piotr Król <piotr.krol(a)3mdeb.com> Gerrit-Comment-Date: Wed, 09 Jun 2021 15:25:04 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: Yes Comment-In-Reply-To: Nico Huber <nico.h(a)gmx.de> Comment-In-Reply-To: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: comment

1 0

Change in flashrom[master]: libflashrom: remove flashrom_supported_programmers
by Nico Huber (Code Review) 10 Jun '21

10 Jun '21

Attention is currently required from: Michał Żygowski, ?ukasz Dmitrowski, David Hendricks, Thomas Heijligen, Angel Pons, Piotr Król. Nico Huber has posted comments on this change. ( https://review.coreboot.org/c/flashrom/+/55350 ) Change subject: libflashrom: remove flashrom_supported_programmers ...................................................................... Patch Set 1: (1 comment) Commit Message: https://review.coreboot.org/c/flashrom/+/55350/comment/4e369ad7_8d18041e PS1, Line 9: const char **flashrom_supported_programmers(void) returns an array of : strings without returning the array size or making a NULL : termination. > CB:55269 happens to NULL-terminate the returned array. It does, but I would still like to get rid of this API. There are other issues, e.g. the complementary flashrom_data_free() is designed such that only a single implementation is possible. Beside making future changes harder, it indirectly leaks information about libflashrom internals. Given that it was broken all the time, I assume nobody is using it, so I guess it would be best to drop it before anybody does. -- To view, visit https://review.coreboot.org/c/flashrom/+/55350 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I0157926a654e337c14d840dd398e5576471c304f Gerrit-Change-Number: 55350 Gerrit-PatchSet: 1 Gerrit-Owner: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: ?ukasz Dmitrowski <lukasz.dmitrowski(a)gmail.com> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Piotr Król <piotr.krol(a)3mdeb.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Attention: ?ukasz Dmitrowski <lukasz.dmitrowski(a)gmail.com> Gerrit-Attention: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Attention: Thomas Heijligen <src(a)posteo.de> Gerrit-Attention: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Attention: Piotr Król <piotr.krol(a)3mdeb.com> Gerrit-Comment-Date: Wed, 09 Jun 2021 15:16:57 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: comment

1 0

Change in flashrom[master]: libflashrom: remove flashrom_system_info
by Nico Huber (Code Review) 10 Jun '21

10 Jun '21

Attention is currently required from: Thomas Heijligen. Nico Huber has posted comments on this change. ( https://review.coreboot.org/c/flashrom/+/55351 ) Change subject: libflashrom: remove flashrom_system_info ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://review.coreboot.org/c/flashrom/+/55351 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Iad805322aeead149a8d51ad8bf0babde2a12f01f Gerrit-Change-Number: 55351 Gerrit-PatchSet: 1 Gerrit-Owner: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Thomas Heijligen <src(a)posteo.de> Gerrit-Comment-Date: Wed, 09 Jun 2021 15:02:36 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 0

Change in flashrom[master]: flashchips: Add support for Macronix MX66L1G45G
by Patrick Rudolph (Code Review) 09 Jun '21

09 Jun '21

Attention is currently required from: Nico Huber, Angel Pons, Patrick Rudolph. Patrick Rudolph has posted comments on this change. ( https://review.coreboot.org/c/flashrom/+/55353 ) Change subject: flashchips: Add support for Macronix MX66L1G45G ...................................................................... Patch Set 2: (5 comments) Commit Message: https://review.coreboot.org/c/flashrom/+/55353/comment/3453f265_c98bdf2d PS1, Line 7: MACRONIX > nit: `Macronix` Done File flashchips.c: https://review.coreboot.org/c/flashrom/+/55353/comment/af165c44_48d228f8 PS1, Line 10075: }, > nit: flashchip entries are separated by a blank line Done https://review.coreboot.org/c/flashrom/+/55353/comment/3a6695fc_07b61b19 PS1, Line 10078: MACRONIX_ > Drop this prefix? Done https://review.coreboot.org/c/flashrom/+/55353/comment/2ec6b629_f0b46336 PS1, Line 10117: MX25L12835F > Hmmmmm... […] Done https://review.coreboot.org/c/flashrom/+/55353/comment/33c9cb1f_b1ea1b5f PS1, Line 10123: }, > same here, flashchip entries are separated by a blank line Done -- To view, visit https://review.coreboot.org/c/flashrom/+/55353 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I554e828c97d9ec77b08489573a34e176599d2518 Gerrit-Change-Number: 55353 Gerrit-PatchSet: 2 Gerrit-Owner: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Nico Huber <nico.h(a)gmx.de> Gerrit-Attention: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Attention: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Comment-Date: Wed, 09 Jun 2021 14:32:37 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: comment

1 0

Change in flashrom[master]: flashchips: Add support for Macronix MX66L1G45G
by Patrick Rudolph (Code Review) 09 Jun '21

09 Jun '21

Attention is currently required from: Nico Huber, Patrick Rudolph. Hello build bot (Jenkins), Nico Huber, Patrick Rudolph, Angel Pons, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/flashrom/+/55353 to look at the new patch set (#2). Change subject: flashchips: Add support for Macronix MX66L1G45G ...................................................................... flashchips: Add support for Macronix MX66L1G45G Tested on Dediprog SF600: Reading and writing works. Change-Id: I554e828c97d9ec77b08489573a34e176599d2518 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M flashchips.c M flashchips.h 2 files changed, 50 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/53/55353/2 -- To view, visit https://review.coreboot.org/c/flashrom/+/55353 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I554e828c97d9ec77b08489573a34e176599d2518 Gerrit-Change-Number: 55353 Gerrit-PatchSet: 2 Gerrit-Owner: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Nico Huber <nico.h(a)gmx.de> Gerrit-Attention: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Attention: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newpatchset

1 0

Change in flashrom[master]: libflashrom: remove flashrom_supported_programmers
by Angel Pons (Code Review) 09 Jun '21

09 Jun '21

Attention is currently required from: Nico Huber, Thomas Heijligen. Angel Pons has posted comments on this change. ( https://review.coreboot.org/c/flashrom/+/55350 ) Change subject: libflashrom: remove flashrom_supported_programmers ...................................................................... Patch Set 1: (2 comments) Commit Message: https://review.coreboot.org/c/flashrom/+/55350/comment/61ca6d44_1b2111a5 PS1, Line 9: const char **flashrom_supported_programmers(void) returns an array of : strings without returning the array size or making a NULL : termination. CB:55269 happens to NULL-terminate the returned array. https://review.coreboot.org/c/flashrom/+/55350/comment/d74c4ce9_cebd2d09 PS1, Line 11: iterate nit: iterating -- To view, visit https://review.coreboot.org/c/flashrom/+/55350 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I0157926a654e337c14d840dd398e5576471c304f Gerrit-Change-Number: 55350 Gerrit-PatchSet: 1 Gerrit-Owner: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Nico Huber <nico.h(a)gmx.de> Gerrit-Attention: Thomas Heijligen <src(a)posteo.de> Gerrit-Comment-Date: Wed, 09 Jun 2021 12:42:29 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment

1 0

2024

2023

2022

2021

2020

2019

2018

2017

flashrom-gerrit