June 2017 - flashrom-gerrit - mail.coreboot.org

Change in flashrom[staging]: Remove djgpp-dos target
by David Hendricks (Code Review) 23 Jun '17

23 Jun '17

David Hendricks has submitted this change and it was merged. ( https://review.coreboot.org/20293 ) Change subject: Remove djgpp-dos target ...................................................................... Remove djgpp-dos target It is not different to other x-compilations. Change-Id: Ia582b4cf622e670f1af439095ff58d62554232aa Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Reviewed-on: https://review.coreboot.org/20293 Reviewed-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> --- M Makefile 1 file changed, 0 insertions(+), 3 deletions(-) Approvals: Stefan Reinauer: Looks good to me, approved build bot (Jenkins): Verified diff --git a/Makefile b/Makefile index 14c5cae..6806e14 100644 --- a/Makefile +++ b/Makefile @@ -1427,9 +1427,6 @@ @rm -rf "$(EXPORTDIR)/flashrom-$(RELEASENAME)" @echo Created "$(EXPORTDIR)/flashrom-$(RELEASENAME).tar.gz" -djgpp-dos: clean - make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip - libpayload: clean make CC="CC=i386-elf-gcc lpgcc" AR=i386-elf-ar RANLIB=i386-elf-ranlib -- To view, visit https://review.coreboot.org/20293 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-MessageType: merged Gerrit-Change-Id: Ia582b4cf622e670f1af439095ff58d62554232aa Gerrit-Change-Number: 20293 Gerrit-PatchSet: 3 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org>

1 0

Change in flashrom[staging]: Remove djgpp-dos target
by build bot (Jenkins) (Code Review) 23 Jun '17

23 Jun '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/20293 ) Change subject: Remove djgpp-dos target ...................................................................... Patch Set 2: Verified+1 Build Successful https://qa.coreboot.org/job/flashrom_gerrit/393/ : SUCCESS https://qa.coreboot.org/job/flashrom-customrules/418/ : SUCCESS -- To view, visit https://review.coreboot.org/20293 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-MessageType: comment Gerrit-Change-Id: Ia582b4cf622e670f1af439095ff58d62554232aa Gerrit-Change-Number: 20293 Gerrit-PatchSet: 2 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Comment-Date: Fri, 23 Jun 2017 06:09:19 +0000 Gerrit-HasComments: No

1 0

Change in flashrom[staging]: Convert flashrom to git
by David Hendricks (Code Review) 23 Jun '17

23 Jun '17

David Hendricks has submitted this change and it was merged. ( https://review.coreboot.org/19206 ) Change subject: Convert flashrom to git ...................................................................... Convert flashrom to git - Drop support for Subversion in the getrevision script and Makefile. - Add .gitignore and .gitattributes file (the latter to limit exports). - Restore modification dates of the exported files from the SCM. - Stop exporting SCM log dumps to CHANGELOG. This makes no sense. - Do not export the pre-"compiled" manpage. It can be generated like anything else from the code dump when we export the respective variable. The latter is added with this change. - Add some initial client-side git hooks * When committing check for obvious stuff you never want anyway: - white space errors * When pushing to the upstream repository check mandatory rules: - existing signoffs and acks in all new commits - no deletions or creation of branches - do not rewrite history of the precious branches, even if forced NOTE: This patch is adapted from Stefan Tauner's original commit: https://mail.coreboot.org/pipermail/flashrom/2016-November/014877.html There are a few major differences: - This uses coreboot's commit-msg hook which includes support for generating and appending Change-Id. - djgpp-dos target removal is moved to a follow-up patch. - Version string changes are moved to a follow-up patch. Change-Id: I64eef21982cac0a0a7419bcd2c8a936672ae9cb2 Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Signed-off-by: David Hendricks <dhendricks(a)fb.com> Reviewed-on: https://review.coreboot.org/19206 Reviewed-by: Nico Huber <nico.h(a)gmx.de> Reviewed-by: Philippe Mathieu-Daudé <f4bug(a)amsat.org> Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> --- A .gitattributes A .gitignore M Makefile M flashrom.c M util/getrevision.sh A util/git-hooks/applypatch-msg A util/git-hooks/commit-msg A util/git-hooks/install.sh A util/git-hooks/pre-applypatch A util/git-hooks/pre-commit A util/git-hooks/pre-push A util/git-hooks/wrapper.sh 12 files changed, 404 insertions(+), 123 deletions(-) Approvals: Nico Huber: Looks good to me, approved Philippe Mathieu-Daudé: Looks good to me, but someone else must approve build bot (Jenkins): Verified diff --git a/.gitattributes b/.gitattributes new file mode 100644 index 0000000..10f8962 --- /dev/null +++ b/.gitattributes @@ -0,0 +1,5 @@ +.gitattributes export-ignore +.gitignore export-ignore +/util/getrevision.sh export-ignore +/util/git-hooks export-ignore +/util/git-hooks/** export-ignore diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..19a4365 --- /dev/null +++ b/.gitignore @@ -0,0 +1,15 @@ +*.d +*.o +/.features +/.dependencies +/.libdeps +/build_details.txt +/flashrom +/flashrom-* +/flashrom.exe +/flashrom.8 + +/util/ich_descriptors_tool/ich_descriptors_tool +/util/ich_descriptors_tool/ich_descriptors_tool.exe +/util/ich_descriptors_tool/.dep +/util/ich_descriptors_tool/.obj diff --git a/Makefile b/Makefile index 8b21431..14c5cae 100644 --- a/Makefile +++ b/Makefile @@ -526,23 +526,36 @@ CLI_OBJS = cli_classic.o cli_output.o cli_common.o print.o -# Set the flashrom version string from the highest revision number of the checked out flashrom files. -# Note to packagers: Any tree exported with "make export" or "make tarball" -# will not require subversion. The downloadable snapshots are already exported. -SVNVERSION := $(shell ./util/getrevision.sh -u 2>/dev/null ) +# Makefile.version is used when packaging flashrom and is generated by the +# export rule. If Makefile.version is not found, version info will be obtained +# using util/getrevision.sh or "unknown" if SCM metadata directory isn't found. +ifeq ($(wildcard Makefile.version),) +ifeq ($(wildcard .git),) +VERSION ?= unknown +MAN_DATE ?= unknown +else +VERSION ?= $(shell ./util/getrevision.sh --local) +MAN_DATE ?= $(shell ./util/getrevision.sh -d $(PROGRAM).8.tmpl 2>/dev/null) +# This is also a convenient time to install hooks. +$(shell ./util/git-hooks/install.sh) +endif +else +include Makefile.version +endif -RELEASE := 0.9.9 -VERSION := $(RELEASE)-$(SVNVERSION) -RELEASENAME ?= $(VERSION) +# VERSION equals "offline" if online access is required but the respective git +# config variable is not set yet. +ifeq ($(VERSION),offline) + $(error Aborting) +endif -SVNDEF := -D'FLASHROM_VERSION="$(VERSION)"' +SCMDEF := -D'FLASHROM_VERSION="$(VERSION)"' -# Inform user if there is no meaningful version string. If there is version information from a VCS print -# something anyway because $(info...) will print a line break in any case which would look suspicious. -# The && between the echos is a workaround for old versions of GNU make that issue the error "unterminated -# variable reference" if a semicolon is used instead. -$(info $(shell ./util/getrevision.sh -c 2>/dev/null || echo "Files don't seem to be under version control." && \ - echo "Replacing all version templates with $(VERSION)." )) +# No spaces in release names unless set explicitly +RELEASENAME ?= $(shell echo "$(VERSION)" | sed -e 's/ /_/') + +# Inform user of the version string +$(info Replacing all version templates with $(VERSION).) ############################################################################### # Default settings of CONFIG_* variables. @@ -1027,7 +1040,7 @@ TAROPTIONS = $(shell LC_ALL=C tar --version|grep -q GNU && echo "--owner=root --group=root") %.o: %.c .features - $(CC) -MMD $(CFLAGS) $(CPPFLAGS) $(FLASHROM_CFLAGS) $(FEATURE_CFLAGS) $(SVNDEF) -o $@ -c $< + $(CC) -MMD $(CFLAGS) $(CPPFLAGS) $(FLASHROM_CFLAGS) $(FEATURE_CFLAGS) $(SCMDEF) -o $@ -c $< # Make sure to add all names of generated binaries here. # This includes all frontends and libflashrom. @@ -1371,7 +1384,7 @@ $(PROGRAM).8: $(PROGRAM).8.tmpl @# Add the man page change date and version to the man page - @sed -e 's#.TH FLASHROM 8 ".*".*#.TH FLASHROM 8 "$(shell ./util/getrevision.sh -d $(PROGRAM).8.tmpl 2>/dev/null)" "$(VERSION)"#' <$< >$@ + @sed -e 's#.TH FLASHROM 8 ".*".*#.TH FLASHROM 8 "$(MAN_DATE)" "$(VERSION)"#' <$< >$@ install: $(PROGRAM)$(EXEC_SUFFIX) $(PROGRAM).8 mkdir -p $(DESTDIR)$(PREFIX)/sbin @@ -1385,25 +1398,42 @@ mkdir -p $(DESTDIR)$(PREFIX)/include $(INSTALL) -m 0644 libflashrom.h $(DESTDIR)$(PREFIX)/include -export: $(PROGRAM).8 - @rm -rf $(EXPORTDIR)/flashrom-$(RELEASENAME) - @svn export -r BASE . $(EXPORTDIR)/flashrom-$(RELEASENAME) - @sed "s/^SVNVERSION.*/SVNVERSION := $(SVNVERSION)/" Makefile >$(EXPORTDIR)/flashrom-$(RELEASENAME)/Makefile - @cp $(PROGRAM).8 "$(EXPORTDIR)/flashrom-$(RELEASENAME)/$(PROGRAM).8" - @svn log >$(EXPORTDIR)/flashrom-$(RELEASENAME)/ChangeLog - @echo Exported $(EXPORTDIR)/flashrom-$(RELEASENAME)/ +_export: $(PROGRAM).8 + @rm -rf "$(EXPORTDIR)/flashrom-$(RELEASENAME)" + @mkdir -p "$(EXPORTDIR)/flashrom-$(RELEASENAME)" + @git archive HEAD | tar -x -C "$(EXPORTDIR)/flashrom-$(RELEASENAME)" +# Generate Makefile.version since SCM metadata won't be available in +# exported sources. + @echo "VERSION = $(VERSION)" > "$(EXPORTDIR)/flashrom-$(RELEASENAME)/Makefile.version" + @echo "MAN_DATE = $(MAN_DATE)" >> "$(EXPORTDIR)/flashrom-$(RELEASENAME)/Makefile.version" +# Restore modification date of all tracked files not marked +# 'export-ignore' in .gitattributes. sed is required to filter out file +# names having the attribute set. + @git ls-tree -r -z -t --full-name --name-only HEAD | \ + git check-attr -z --stdin export-ignore | \ + sed -zne 'x;n;n;/^set$$/{b};x;p' | \ + xargs -0 sh -c 'for f; do \ + touch -d $$(git log --pretty=format:%cI -1 HEAD -- "$$f") \ + "$(EXPORTDIR)/flashrom-$(RELEASENAME)/$$f"; \ + done' -tarball: export - @tar cjf $(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2 -C $(EXPORTDIR)/ $(TAROPTIONS) flashrom-$(RELEASENAME)/ - @rm -rf $(EXPORTDIR)/flashrom-$(RELEASENAME) - @echo Created $(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2 +export: _export + @echo "Exported $(EXPORTDIR)/flashrom-$(RELEASENAME)/" + +tarball: _export + @tar -cz --format=ustar -f "$(EXPORTDIR)/flashrom-$(RELEASENAME).tar.gz" \ + -C "$(EXPORTDIR)/$(TAROPTIONS)" "flashrom-$(RELEASENAME)/" +# Delete the exported directory again because it is most likely what's expected by the user. + @rm -rf "$(EXPORTDIR)/flashrom-$(RELEASENAME)" + @echo Created "$(EXPORTDIR)/flashrom-$(RELEASENAME).tar.gz" djgpp-dos: clean make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip + libpayload: clean make CC="CC=i386-elf-gcc lpgcc" AR=i386-elf-ar RANLIB=i386-elf-ranlib -.PHONY: all install clean distclean compiler hwlibs features export tarball djgpp-dos featuresavailable libpayload +.PHONY: all install clean distclean compiler hwlibs features _export export tarball featuresavailable libpayload # Disable implicit suffixes and built-in rules (for performance and profit) .SUFFIXES: diff --git a/flashrom.c b/flashrom.c index 379f75e..c600efc 100644 --- a/flashrom.c +++ b/flashrom.c @@ -2030,7 +2030,7 @@ void print_version(void) { - msg_ginfo("flashrom v%s", flashrom_version); + msg_ginfo("flashrom %s", flashrom_version); print_sysinfo(); msg_ginfo("\n"); } diff --git a/util/getrevision.sh b/util/getrevision.sh index 1012058..e1580e5 100755 --- a/util/getrevision.sh +++ b/util/getrevision.sh @@ -5,7 +5,7 @@ # Copyright (C) 2005 coresystems GmbH <stepan(a)coresystems.de> # Copyright (C) 2009,2010 Carl-Daniel Hailfinger # Copyright (C) 2010 Chromium OS Authors -# Copyright (C) 2013 Stefan Tauner +# Copyright (C) 2013-2016 Stefan Tauner # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -31,22 +31,16 @@ export TZ=UTC0 # Helper functions -# First argument is the path to inspect (usually optional; w/o it the whole repository will be considered) -svn_has_local_changes() { - svn status "$1" | egrep '^ *[ADMR] *' >/dev/null -} - +# First argument is the path to inspect (usually optional; without +# it the whole repository will be considered) git_has_local_changes() { git update-index -q --refresh >/dev/null ! git diff-index --quiet HEAD -- "$1" } git_last_commit() { + # git rev-parse --short HEAD would suffice if repository as a whole is of interest (no $1) git log --pretty=format:"%h" -1 -- "$1" -} - -svn_is_file_tracked() { - svn info "$1" >/dev/null 2>&1 } git_is_file_tracked() { @@ -54,7 +48,7 @@ } is_file_tracked() { - svn_is_file_tracked "$1" || git_is_file_tracked "$1" + git_is_file_tracked "$1" } # Tries to find a remote source for the changes committed locally. @@ -62,7 +56,7 @@ # Takes one optional argument: the path to inspect git_url() { last_commit=$(git_last_commit "$1") - # get all remote branches containing the last commit (excluding origin/HEAD and git-svn branches/tags) + # get all remote branches containing the last commit (excluding origin/HEAD) branches=$(git branch -r --contains $last_commit | sed '/\//!d;/.*->.*/d;s/[\t ]*//') if [ -z "$branches" ] ; then echo "No remote branch contains a suitable commit">&2 @@ -89,13 +83,7 @@ scm_url() { local url= - # for a primitive VCS like subversion finding the URL is easy: there is only one upstream host - if svn_is_file_tracked "$1" ; then - url="$(svn info "$1" 2>/dev/null | - grep URL: | - sed 's/.*URL:[[:blank:]]*//;s/:\/\/.*@/:\/\//' | - grep ^.)" - elif git_is_file_tracked "$1" ; then + if git_is_file_tracked "$1" ; then url="$(git_url "$1")" else return ${EXIT_FAILURE} @@ -116,29 +104,7 @@ # freebsd date [-jnu] [-d dst] [-r seconds] [-f fmt date | [[[[[cc]yy]mm]dd]HH]MM[.ss]] [+format] [...] # dragonflybsd date [-jnu] [-d dst] [-r seconds] [-f fmt date | [[[[[cc]yy]mm]dd]HH]MM[.ss]] [+format] [...] # openbsd date [-aju] [-d dst] [-r seconds] [+format] [[[[[[cc]yy]mm]dd]HH]MM[.SS]] [...] - if svn_is_file_tracked "$2" ; then - if svn_has_local_changes "$2"; then - t=$(date -u "$1") - else - # No local changes, get date of the last log record. Subversion provides that in - # ISO 8601 format when using the --xml switch. The sed call extracts that ignoring any - # fractional parts started by a comma or a dot. - local last_commit_date="$(svn info --xml "$2"| \ - sed -n -e 's/<date>$[^,\.]*$$[\.,].*$*Z<\/date>/\1Z/p')" - - case $(uname) in - # Most BSD dates do not support parsing date values from user input with -d but all of - # them support parsing the syntax with [[[[[[cc]yy]mm]dd]HH]MM[.ss]]. We have to - # transform the ISO8601 date first though. - NetBSD|OpenBSD|DragonFly|FreeBSD) - last_commit_date="$(echo ${last_commit_date} | \ - sed -n -e 's/$....$-$..$-$..$T$..$:$..$:$..$Z/\1\2\3\4\5\.\6/p')" - t=$(date -u -j "${last_commit_date}" "$1" 2>/dev/null);; - *) - t=$(date -u -d "${last_commit_date}" "$1" 2>/dev/null);; - esac - fi - elif git_is_file_tracked "$2" ; then + if git_is_file_tracked "$2" ; then # are there local changes? if git_has_local_changes "$2" ; then t=$(date -u "${1}") @@ -163,24 +129,10 @@ echo "${t}" } -# Retrieve local SCM revision info. This is useful if we're working in a different SCM than upstream and/or -# have local changes. +# Retrieve local revision info. local_revision() { - local r= - - if svn_is_file_tracked "$1" ; then - r=$(svn_has_local_changes "$1" && echo "dirty") - elif git_is_file_tracked "$1" ; then - r=$(git_last_commit "$1") - - local svn_base=$(git log --grep=git-svn-id -1 --format='%h') - if [ "$svn_base" != "" ] ; then - local diff_to_svn=$(git rev-list --count ${svn_base}..${r}) - if [ "$diff_to_svn" -gt 0 ] ; then - r="$r-$diff_to_svn" - fi - fi - + if git_is_file_tracked "$1" ; then + local r=$(git describe $(git_last_commit "$1")) if git_has_local_changes "$1" ; then r="$r-dirty" fi @@ -188,30 +140,6 @@ return ${EXIT_FAILURE} fi - echo "${r}" -} - -# Get the upstream flashrom revision stored in SVN metadata. -upstream_revision() { - local r= - - if svn_is_file_tracked "$1" ; then - r=$(svn info "$1" 2>/dev/null | \ - grep "Last Changed Rev:" | \ - sed -e "s/^Last Changed Rev: *//" -e "s/$[0-9]*$.*/r\1/" | \ - grep "r[0-9]") - elif git_is_file_tracked "$1" ; then - # If this is a "native" git-svn clone we could use git svn log: - # git svn log --oneline -1 | sed 's/^r//;s/[[:blank:]].*//' or even git svn find-rev - # but it is easier to just grep for the git-svn-id unconditionally - r=$(git log --grep=git-svn-id -1 -- "$1" | \ - grep git-svn-id | \ - sed 's/.*@/r/;s/[[:blank:]].*//') - fi - - if [ -z "$r" ]; then - r="unknown" # default to unknown - fi echo "${r}" } @@ -230,8 +158,6 @@ test if path is under version control at all -l or --local local revision information including an indicator for uncommitted changes - -u or --upstream - upstream revision -U or --url URL associated with the latest commit -d or --date @@ -264,10 +190,6 @@ check_action $1 action=local_revision shift;; - -u|--upstream) - check_action $1 - action=upstream_revision - shift;; -U|--url) check_action $1 action=scm_url @@ -281,8 +203,8 @@ action="timestamp +%Y-%m-%dT%H:%M:%SZ" # There is only one valid time format! ISO 8601 shift;; -c|--check) - check_action=$1 - action="is_tracked" + check_action $1 + action=is_tracked shift;; -*) show_help; @@ -305,9 +227,6 @@ # default to current directory (usually equals the whole repository) if [ -z "$query_path" ] ; then query_path=. - fi - if ! is_file_tracked "$query_path" ; then - echo "Warning: Path \"${query_path}\" is not under version control.">&2 fi if [ -z "$action" ] ; then show_help diff --git a/util/git-hooks/applypatch-msg b/util/git-hooks/applypatch-msg new file mode 100755 index 0000000..32ff6c7 --- /dev/null +++ b/util/git-hooks/applypatch-msg @@ -0,0 +1,15 @@ +#!/bin/sh +# +# A hook script to check the commit log message taken by +# applypatch from an e-mail message (via git-am). +# We simply do the same as for other commit messages +# +# The hook should exit with non-zero status after issuing an +# appropriate message if it wants to stop the commit. The hook is +# allowed to edit the commit message file. +# + +. git-sh-setup +test -x "$GIT_DIR/hooks/commit-msg" && + exec "$GIT_DIR/hooks/commit-msg" ${1+"$@"} +: diff --git a/util/git-hooks/commit-msg b/util/git-hooks/commit-msg new file mode 100755 index 0000000..82f0581 --- /dev/null +++ b/util/git-hooks/commit-msg @@ -0,0 +1,173 @@ +#!/bin/sh +# +# Part of Gerrit Code Review (http://code.google.com/p/gerrit/) +# +# Copyright (C) 2009 The Android Open Source Project +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# + +CHANGE_ID_AFTER="Bug|Issue" +MSG="$1" + +# Check for, and add if missing, a unique Change-Id +# +add_ChangeId() { + clean_message=`sed -e ' + /^diff --git a\/.*/{ + s/// + q + } + /^Signed-off-by:/d + /^#/d + ' "$MSG" | git stripspace` + if test -z "$clean_message" + then + return + fi + + # Does Change-Id: already exist? if so, exit (no change). + if grep -i '^Change-Id: I[0-9a-f]\{40\}$' "$MSG" >/dev/null + then + return + fi + + id=`_gen_ChangeId` + T="$MSG.tmp.$$" + AWK=awk + if [ -x /usr/xpg4/bin/awk ]; then + # Solaris AWK is just too broken + AWK=/usr/xpg4/bin/awk + fi + + # How this works: + # - parse the commit message as (textLine+ blankLine*)* + # - assume textLine+ to be a footer until proven otherwise + # - exception: the first block is not footer (as it is the title) + # - read textLine+ into a variable + # - then count blankLines + # - once the next textLine appears, print textLine+ blankLine* as these + # aren't footer + # - in END, the last textLine+ block is available for footer parsing + $AWK ' + BEGIN { + # while we start with the assumption that textLine+ + # is a footer, the first block is not. + isFooter = 0 + footerComment = 0 + blankLines = 0 + } + + # Skip lines starting with "#" without any spaces before it. + /^#/ { next } + + # Skip the line starting with the diff command and everything after it, + # up to the end of the file, assuming it is only patch data. + # If more than one line before the diff was empty, strip all but one. + /^diff --git a/ { + blankLines = 0 + while (getline) { } + next + } + + # Count blank lines outside footer comments + /^$/ && (footerComment == 0) { + blankLines++ + next + } + + # Catch footer comment + /^\[[a-zA-Z0-9-]+:/ && (isFooter == 1) { + footerComment = 1 + } + + /]$/ && (footerComment == 1) { + footerComment = 2 + } + + # We have a non-blank line after blank lines. Handle this. + (blankLines > 0) { + print lines + for (i = 0; i < blankLines; i++) { + print "" + } + + lines = "" + blankLines = 0 + isFooter = 1 + footerComment = 0 + } + + # Detect that the current block is not the footer + (footerComment == 0) && (!/^\[?[a-zA-Z0-9-]+:/ || /^[a-zA-Z0-9-]+:\/\//) { + isFooter = 0 + } + + { + # We need this information about the current last comment line + if (footerComment == 2) { + footerComment = 0 + } + if (lines != "") { + lines = lines "\n"; + } + lines = lines $0 + } + + # Footer handling: + # If the last block is considered a footer, splice in the Change-Id at the + # right place. + # Look for the right place to inject Change-Id by considering + # CHANGE_ID_AFTER. Keys listed in it (case insensitive) come first, + # then Change-Id, then everything else (eg. Signed-off-by:). + # + # Otherwise just print the last block, a new line and the Change-Id as a + # block of its own. + END { + unprinted = 1 + if (isFooter == 0) { + print lines "\n" + lines = "" + } + changeIdAfter = "^(" tolower("'"$CHANGE_ID_AFTER"'") "):" + numlines = split(lines, footer, "\n") + for (line = 1; line <= numlines; line++) { + if (unprinted && match(tolower(footer[line]), changeIdAfter) != 1) { + unprinted = 0 + print "Change-Id: I'"$id"'" + } + print footer[line] + } + if (unprinted) { + print "Change-Id: I'"$id"'" + } + }' "$MSG" > $T && mv $T "$MSG" || rm -f $T +} +_gen_ChangeIdInput() { + echo "tree `git write-tree`" + if parent=`git rev-parse "HEAD^0" 2>/dev/null` + then + echo "parent $parent" + fi + echo "author `git var GIT_AUTHOR_IDENT`" + echo "committer `git var GIT_COMMITTER_IDENT`" + echo + printf '%s' "$clean_message" +} +_gen_ChangeId() { + _gen_ChangeIdInput | + git hash-object -t commit --stdin +} + + +add_ChangeId diff --git a/util/git-hooks/install.sh b/util/git-hooks/install.sh new file mode 100755 index 0000000..bc90e37 --- /dev/null +++ b/util/git-hooks/install.sh @@ -0,0 +1,19 @@ +#!/bin/sh -e + +root=$(git rev-parse --show-cdup 2>/dev/null) || \ + { echo "Not under git control. Cannot install git hooks." >&2 ; exit 0 ; } + +dst="${root}"$(git rev-parse --git-path hooks/) +src=util/git-hooks/ # relative to root +hooks=$(cd "${root}${src}" && git ls-files -c | grep -Ev 'install.sh|wrapper.sh') + +for h in $hooks; do + # Test if hook is not already installed, i.e. doesn't point at the wrapper + if [ ! "${dst}$h" -ef "${root}${src}wrapper.sh" ]; then + # preserve custom hooks if any + if [ -e "${dst}$h" ]; then + mv "${dst}$h" "${dst}$h.local" + fi + ln -s "$(git rev-parse --prefix $(git rev-parse --git-path hooks/) --show-cdup)${src}wrapper.sh" "${dst}$h" + fi +done diff --git a/util/git-hooks/pre-applypatch b/util/git-hooks/pre-applypatch new file mode 100755 index 0000000..2ed28f7 --- /dev/null +++ b/util/git-hooks/pre-applypatch @@ -0,0 +1,12 @@ +#!/bin/sh +# +# An example hook script to verify what is about to be committed +# by applypatch from an e-mail message. +# +# The hook should exit with non-zero status after issuing an +# appropriate message if it wants to stop the commit. + +. git-sh-setup +test -x "$GIT_DIR/hooks/pre-commit" && + exec "$GIT_DIR/hooks/pre-commit" ${1+"$@"} +: diff --git a/util/git-hooks/pre-commit b/util/git-hooks/pre-commit new file mode 100755 index 0000000..dbccb9e --- /dev/null +++ b/util/git-hooks/pre-commit @@ -0,0 +1,9 @@ +#!/bin/sh +# +# A hook script to verify what is about to be committed. +# Called by "git commit" with no arguments. The hook should +# exit with non-zero status after issuing an appropriate message if +# it wants to stop the commit. + +# Check for whitespace errors +git diff-index --check --cached HEAD -- || exit 1 diff --git a/util/git-hooks/pre-push b/util/git-hooks/pre-push new file mode 100755 index 0000000..5bae8d2 --- /dev/null +++ b/util/git-hooks/pre-push @@ -0,0 +1,74 @@ +#!/bin/sh + +# A hook script to verify what is about to be pushed. Called by "git +# push" after it has checked the remote status, but before anything has been +# pushed. If this script exits with a non-zero status nothing will be pushed. +# +# This hook is called with the following parameters: +# +# $1 -- Name of the remote to which the push is being done +# $2 -- URL to which the push is being done +# +# If pushing without using a named remote those arguments will be equal. +# +# Information about the commits which are being pushed is supplied as lines to +# the standard input in the form: +# +# <local ref> <local sha1> <remote ref> <remote sha1> + +remote="$1" +url="$2" + +zero=0000000000000000000000000000000000000000 + +upstream_pattern="github\.com.flashrom/flashrom(\.git)?|flashrom\.org.git/flashrom(\.git)?" +precious_branches="stable staging" + +# Only care about the upstream repository +if echo "$url" | grep -q -v -E "$upstream_pattern" ; then + exit 0 +fi + +while read local_ref local_sha remote_ref remote_sha ; do + if [ "$remote_ref" != "refs/heads/staging" -a "$remote_ref" != "refs/heads/stable" ]; then + echo "Feature branches not allowed ($remote_ref)." >&2 + exit 1 + fi + + if [ "$local_sha" = $zero ]; then + echo "Deletion of branches is prohibited." >&2 + exit 1 + fi + + if [ "$remote_sha" = "$zero" ]; then + echo "No new branches allowed." >&2 + exit 1 + fi + + # Check for Signed-off-by and Acked-by + commit=$(git rev-list -n 1 --all-match --invert-grep -E \ + --grep '^Signed-off-by: .+ <.+@.+\..+>$' --grep '^Acked-by: .+ <.+@.+\..+>$' \ + "$remote_sha..$local_sha") + if [ -n "$commit" ]; then + echo "Commit $local_sha in $local_ref is missing either \"Signed-off-by\"" \ + " or \"Acked-by\" lines, not pushing." >&2 + exit 1 + fi + + # Make _really_ sure we do not rewrite precious history + for lbranch in $precious_branches ; do + if [ "$remote_ref" = "refs/heads/$lbranch" ]; then + nonreachable=$(git rev-list $remote_sha ^$local_sha | head -1) + if [ -n "$nonreachable" ]; then + echo "Only fast-forward pushes are allowed on $lbranch." >&2 + echo "$nonreachable is not included in $remote_sha while pushing to $remote_ref" >&2 + exit 1 + fi + fi + done + + # FIXME: check commit log format (subject without full stop at the end etc). + # FIXME: do buildbot checks if authorized? +done + +exit 0 diff --git a/util/git-hooks/wrapper.sh b/util/git-hooks/wrapper.sh new file mode 100755 index 0000000..3fc3e05 --- /dev/null +++ b/util/git-hooks/wrapper.sh @@ -0,0 +1,10 @@ +#!/bin/sh + +if [ -x $0.local ]; then + $0.local "$@" || exit $? +fi + +hook=$(git rev-parse --show-toplevel)"/util/git-hooks/"$(basename $0) +if [ -x $hook ]; then + $hook "$@" || exit $? +fi -- To view, visit https://review.coreboot.org/19206 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-MessageType: merged Gerrit-Change-Id: I64eef21982cac0a0a7419bcd2c8a936672ae9cb2 Gerrit-Change-Number: 19206 Gerrit-PatchSet: 11 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: Philippe Mathieu-Daudé <f4bug(a)amsat.org> Gerrit-Reviewer: Stefan Tauner <stefan.tauner(a)gmx.at> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Reviewer: david.hendricks(a)gmail.com

1 0

Change in flashrom[staging]: Convert flashrom to git
by build bot (Jenkins) (Code Review) 23 Jun '17

23 Jun '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/19206 ) Change subject: Convert flashrom to git ...................................................................... Patch Set 10: Verified+1 Build Successful https://qa.coreboot.org/job/flashrom_gerrit/392/ : SUCCESS https://qa.coreboot.org/job/flashrom-customrules/416/ : SUCCESS -- To view, visit https://review.coreboot.org/19206 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-MessageType: comment Gerrit-Change-Id: I64eef21982cac0a0a7419bcd2c8a936672ae9cb2 Gerrit-Change-Number: 19206 Gerrit-PatchSet: 10 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: Philippe Mathieu-Daudé <f4bug(a)amsat.org> Gerrit-Reviewer: Stefan Tauner <stefan.tauner(a)gmx.at> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Reviewer: david.hendricks(a)gmail.com Gerrit-Comment-Date: Fri, 23 Jun 2017 06:07:59 +0000 Gerrit-HasComments: No

1 0

Change in flashrom[staging]: Convert flashrom to git
by David Hendricks (Code Review) 23 Jun '17

23 Jun '17

David Hendricks has posted comments on this change. ( https://review.coreboot.org/19206 ) Change subject: Convert flashrom to git ...................................................................... Patch Set 9: Made a trivial change to the commit message to align the bullet points near the bottom. Aside from that, I think we've stared at this long enough. I sanity checked "make", "make export", and getrevision.sh output. The hooks seem to be working properly (but then, they seemed to work properly when there was a missing "fi" so...). Anyway, I think we can commit this and follow-up with any fixes or tweaks as we get more people using/testing it. -- To view, visit https://review.coreboot.org/19206 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-MessageType: comment Gerrit-Change-Id: I64eef21982cac0a0a7419bcd2c8a936672ae9cb2 Gerrit-Change-Number: 19206 Gerrit-PatchSet: 9 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: Philippe Mathieu-Daudé <f4bug(a)amsat.org> Gerrit-Reviewer: Stefan Tauner <stefan.tauner(a)gmx.at> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Reviewer: david.hendricks(a)gmail.com Gerrit-Comment-Date: Fri, 23 Jun 2017 06:07:07 +0000 Gerrit-HasComments: No

1 0

Change in flashrom[staging]: Convert flashrom to git
by build bot (Jenkins) (Code Review) 23 Jun '17

23 Jun '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/19206 ) Change subject: Convert flashrom to git ...................................................................... Patch Set 9: Verified+1 Build Successful https://qa.coreboot.org/job/flashrom-customrules/415/ : SUCCESS -- To view, visit https://review.coreboot.org/19206 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-MessageType: comment Gerrit-Change-Id: I64eef21982cac0a0a7419bcd2c8a936672ae9cb2 Gerrit-Change-Number: 19206 Gerrit-PatchSet: 9 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: Philippe Mathieu-Daudé <f4bug(a)amsat.org> Gerrit-Reviewer: Stefan Tauner <stefan.tauner(a)gmx.at> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Reviewer: david.hendricks(a)gmail.com Gerrit-Comment-Date: Fri, 23 Jun 2017 06:03:28 +0000 Gerrit-HasComments: No

1 0

Change in flashrom[staging]: Convert flashrom to git
by David Hendricks (Code Review) 23 Jun '17

23 Jun '17

Hello Stefan Tauner, david.hendricks(a)gmail.com, Philippe Mathieu-Daudé, Paul Menzel, build bot (Jenkins), Nico Huber, Martin Roth, I'd like you to reexamine a change. Please visit https://review.coreboot.org/19206 to look at the new patch set (#9). Change subject: Convert flashrom to git ...................................................................... Convert flashrom to git - Drop support for Subversion in the getrevision script and Makefile. - Add .gitignore and .gitattributes file (the latter to limit exports). - Restore modification dates of the exported files from the SCM. - Stop exporting SCM log dumps to CHANGELOG. This makes no sense. - Do not export the pre-"compiled" manpage. It can be generated like anything else from the code dump when we export the respective variable. The latter is added with this change. - Add some initial client-side git hooks * When committing check for obvious stuff you never want anyway: - white space errors * When pushing to the upstream repository check mandatory rules: - existing signoffs and acks in all new commits - no deletions or creation of branches - do not rewrite history of the precious branches, even if forced NOTE: This patch is adapted from Stefan Tauner's original commit: https://mail.coreboot.org/pipermail/flashrom/2016-November/014877.html There are a few major differences: - This uses coreboot's commit-msg hook which includes support for generating and appending Change-Id. - djgpp-dos target removal is moved to a follow-up patch. - Version string changes are moved to a follow-up patch. Change-Id: I64eef21982cac0a0a7419bcd2c8a936672ae9cb2 Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Signed-off-by: David Hendricks <dhendricks(a)fb.com> --- A .gitattributes A .gitignore M Makefile M flashrom.c M util/getrevision.sh A util/git-hooks/applypatch-msg A util/git-hooks/commit-msg A util/git-hooks/install.sh A util/git-hooks/pre-applypatch A util/git-hooks/pre-commit A util/git-hooks/pre-push A util/git-hooks/wrapper.sh 12 files changed, 404 insertions(+), 123 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/06/19206/9 -- To view, visit https://review.coreboot.org/19206 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-MessageType: newpatchset Gerrit-Change-Id: I64eef21982cac0a0a7419bcd2c8a936672ae9cb2 Gerrit-Change-Number: 19206 Gerrit-PatchSet: 9 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: Philippe Mathieu-Daudé <f4bug(a)amsat.org> Gerrit-Reviewer: Stefan Tauner <stefan.tauner(a)gmx.at> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Reviewer: david.hendricks(a)gmail.com

1 0

Change in flashrom[staging]: cli_common: Dont request reports from known-bad chip operations
by Nico Huber (Code Review) 22 Jun '17

22 Jun '17

Nico Huber has posted comments on this change. ( https://review.coreboot.org/19614 ) Change subject: cli_common: Dont request reports from known-bad chip operations ...................................................................... Patch Set 1: >> (1 comment) > > Is it possible to change the flashrom gerrit config to this limit? AFAIK, you cannot set it per project, only globally in the "Diff preferences", shortcut: `,` -- To view, visit https://review.coreboot.org/19614 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-MessageType: comment Gerrit-Change-Id: Ic4dc0d85534f2fcfe4dcb9733d4994c8853b48a7 Gerrit-Change-Number: 19614 Gerrit-PatchSet: 1 Gerrit-Owner: Urja Rannikko <urjaman(a)gmail.com> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: Philippe Mathieu-Daudé <f4bug(a)amsat.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Comment-Date: Thu, 22 Jun 2017 14:45:56 +0000 Gerrit-HasComments: No

1 0

Change in flashrom[staging]: Convert flashrom to git
by Philippe Mathieu-Daudé (Code Review) 22 Jun '17

22 Jun '17

Philippe Mathieu-Daudé has posted comments on this change. ( https://review.coreboot.org/19206 ) Change subject: Convert flashrom to git ...................................................................... Patch Set 8: Code-Review+1 -- To view, visit https://review.coreboot.org/19206 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-MessageType: comment Gerrit-Change-Id: I64eef21982cac0a0a7419bcd2c8a936672ae9cb2 Gerrit-Change-Number: 19206 Gerrit-PatchSet: 8 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: Philippe Mathieu-Daudé <f4bug(a)amsat.org> Gerrit-Reviewer: Stefan Tauner <stefan.tauner(a)gmx.at> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Reviewer: david.hendricks(a)gmail.com Gerrit-Comment-Date: Thu, 22 Jun 2017 13:52:20 +0000 Gerrit-HasComments: No

1 0

Change in flashrom[staging]: Add a generic 27C256 definition (32k UV EPROM)
by Philippe Mathieu-Daudé (Code Review) 22 Jun '17

22 Jun '17

Philippe Mathieu-Daudé has posted comments on this change. ( https://review.coreboot.org/19616 ) Change subject: Add a generic 27C256 definition (32k UV EPROM) ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://review.coreboot.org/19616 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-MessageType: comment Gerrit-Change-Id: Ie726ff252bc398d78e76bfb5ed01359341b734f3 Gerrit-Change-Number: 19616 Gerrit-PatchSet: 1 Gerrit-Owner: Urja Rannikko <urjaman(a)gmail.com> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: Philippe Mathieu-Daudé <f4bug(a)amsat.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Comment-Date: Thu, 22 Jun 2017 13:50:29 +0000 Gerrit-HasComments: No

1 0

2024

2023

2022

2021

2020

2019

2018

2017

flashrom-gerrit June 2017