April 2017 - flashrom-gerrit - mail.coreboot.org

Change in flashrom[staging]: Add option (-A, --noverify-all) to not verify the whole chip...
by David Hendricks (Code Review) April 7, 2017

April 7, 2017

Hello Nico Huber, I'd like you to do a code review. Please visit https://review.coreboot.org/19194 to review the following change. Change subject: Add option (-A, --noverify-all) to not verify the whole chip after write ...................................................................... Add option (-A, --noverify-all) to not verify the whole chip after write This also reduces the data read before the write to the included layout regions. Change-Id: I00d5d8ae1f1610cd638e1f36fbf60f5159119ad6 Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M cli_classic.c 1 file changed, 9 insertions(+), 4 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/94/19194/1 diff --git a/cli_classic.c b/cli_classic.c index d7e17f7..d23a3a3 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -42,7 +42,7 @@ "-z|" #endif "-p <programmername>[:<parameters>] [-c <chipname>]\n" - "[-E|(-r|-w|-v) <file>] [-l <layoutfile> [-i <imagename>]...] [-n] [-f]]\n" + "[-E|(-r|-w|-v) <file>] [-l <layoutfile> [-i <imagename>]...] [-n] [-A] [-f]]\n" "[-V[V[V]]] [-o <logfile>]\n\n", name); printf(" -h | --help print this help text\n" @@ -55,6 +55,7 @@ " -c | --chip <chipname> probe only for specified flash chip\n" " -f | --force force specific operations (see man page)\n" " -n | --noverify don't auto-verify\n" + " -A | --noverify-all don't auto-verify whole chip\n" " -l | --layout <layoutfile> read ROM layout from <layoutfile>\n" " -i | --image <name> only flash image <name> from flash layout\n" " -o | --output <logfile> log output to <logfile>\n" @@ -103,17 +104,18 @@ int list_supported_wiki = 0; #endif int read_it = 0, write_it = 0, erase_it = 0, verify_it = 0; - int dont_verify_it = 0, list_supported = 0, operation_specified = 0; + int dont_verify_it = 0, dont_verify_all = 0, list_supported = 0, operation_specified = 0; enum programmer prog = PROGRAMMER_INVALID; int ret = 0; - static const char optstring[] = "r:Rw:v:nVEfc:l:i:p:Lzho:"; + static const char optstring[] = "r:Rw:v:nAVEfc:l:i:p:Lzho:"; static const struct option long_options[] = { {"read", 1, NULL, 'r'}, {"write", 1, NULL, 'w'}, {"erase", 0, NULL, 'E'}, {"verify", 1, NULL, 'v'}, {"noverify", 0, NULL, 'n'}, + {"noverify-all", 0, NULL, 'A'}, {"chip", 1, NULL, 'c'}, {"verbose", 0, NULL, 'V'}, {"force", 0, NULL, 'f'}, @@ -189,6 +191,9 @@ cli_classic_abort_usage(); } dont_verify_it = 1; + break; + case 'A': + dont_verify_all = 1; break; case 'c': chip_to_probe = strdup(optarg); @@ -536,7 +541,7 @@ fl_flag_set(fill_flash, FL_FLAG_FORCE, !!force); fl_flag_set(fill_flash, FL_FLAG_FORCE_BOARDMISMATCH, !!force_boardmismatch); fl_flag_set(fill_flash, FL_FLAG_VERIFY_AFTER_WRITE, !dont_verify_it); - fl_flag_set(fill_flash, FL_FLAG_VERIFY_WHOLE_CHIP, true); + fl_flag_set(fill_flash, FL_FLAG_VERIFY_WHOLE_CHIP, !dont_verify_all); /* FIXME: We should issue an unconditional chip reset here. This can be * done once we have a .reset function in struct flashchip. -- To view, visit https://review.coreboot.org/19194 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I00d5d8ae1f1610cd638e1f36fbf60f5159119ad6 Gerrit-PatchSet: 1 Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de>

1 0

Change in flashrom[staging]: cli_classic: Remove layout-for-write-only
by David Hendricks (Code Review) April 7, 2017

April 7, 2017

Hello Nico Huber, I'd like you to do a code review. Please visit https://review.coreboot.org/19195 to review the following change. Change subject: cli_classic: Remove layout-for-write-only ...................................................................... cli_classic: Remove layout-for-write-only Change-Id: If75d87c0625b48257aa65f1aa793f83b1d6ef2bc Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M cli_classic.c 1 file changed, 0 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/95/19195/1 diff --git a/cli_classic.c b/cli_classic.c index d23a3a3..aef7693 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -376,12 +376,6 @@ ret = 1; goto out; } - if (layoutfile != NULL && !write_it) { - msg_gerr("Layout files are currently supported for write operations only.\n"); - ret = 1; - goto out; - } - if (process_include_args()) { ret = 1; goto out; -- To view, visit https://review.coreboot.org/19195 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: If75d87c0625b48257aa65f1aa793f83b1d6ef2bc Gerrit-PatchSet: 1 Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de>

1 0

Change in flashrom[staging]: Make read_ich_descriptors_from_dump() available in flashrom
by David Hendricks (Code Review) April 7, 2017

April 7, 2017

Hello Nico Huber, I'd like you to do a code review. Please visit https://review.coreboot.org/19196 to review the following change. Change subject: Make read_ich_descriptors_from_dump() available in flashrom ...................................................................... Make read_ich_descriptors_from_dump() available in flashrom I didn't really know what I was doing and hope removing the #ifdefs doesn't have negative side effects. The idea is to make the functions generally available for external flashing (e.g. you might want to flash an Intel machine using an ARM device as programmer). Beware of big endian trouble, I guess. :-P Change-Id: I17f80733ab6486b8b9ce80860196195a412a38da Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M ich_descriptors.c M ich_descriptors.h M util/ich_descriptors_tool/Makefile 3 files changed, 9 insertions(+), 27 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/96/19196/1 diff --git a/ich_descriptors.c b/ich_descriptors.c index 90f70ee..c9e82eb 100644 --- a/ich_descriptors.c +++ b/ich_descriptors.c @@ -19,14 +19,13 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if defined(__i386__) || defined(__x86_64__) - #include "ich_descriptors.h" -#ifdef ICH_DESCRIPTORS_FROM_DUMP - +#ifdef ICH_DESCRIPTORS_FROM_DUMP_ONLY #include <stdio.h> #define print(t, ...) printf(__VA_ARGS__) +#endif + #define DESCRIPTOR_MODE_SIGNATURE 0x0ff0a55a /* The upper map is located in the word before the 256B-long OEM section at the * end of the 4kB-long flash descriptor. @@ -34,12 +33,9 @@ #define UPPER_MAP_OFFSET (4096 - 256 - 4) #define getVTBA(flumap) (((flumap)->FLUMAP1 << 4) & 0x00000ff0) -#else /* ICH_DESCRIPTORS_FROM_DUMP */ - +#include <string.h> #include "flash.h" /* for msg_* */ #include "programmer.h" - -#endif /* ICH_DESCRIPTORS_FROM_DUMP */ #ifndef min #define min(a, b) (a < b) ? a : b @@ -69,12 +65,12 @@ prettyprint_ich_descriptor_component(cs, desc); prettyprint_ich_descriptor_region(desc); prettyprint_ich_descriptor_master(&desc->master); -#ifdef ICH_DESCRIPTORS_FROM_DUMP +#ifdef ICH_DESCRIPTORS_FROM_DUMP_ONLY if (cs >= CHIPSET_ICH8) { prettyprint_ich_descriptor_upper_map(&desc->upper); prettyprint_ich_descriptor_straps(cs, desc); } -#endif /* ICH_DESCRIPTORS_FROM_DUMP */ +#endif /* ICH_DESCRIPTORS_FROM_DUMP_ONLY */ } void prettyprint_ich_descriptor_content(const struct ich_desc_content *cont) @@ -300,8 +296,6 @@ (mstr->GbE_plat_r) ?'r':' ', (mstr->GbE_plat_w) ?'w':' '); msg_pdbg2("\n"); } - -#ifdef ICH_DESCRIPTORS_FROM_DUMP void prettyprint_ich_descriptor_straps_ich8(const struct ich_descriptors *desc) { @@ -792,7 +786,7 @@ return ICH_RET_OK; } -#else /* ICH_DESCRIPTORS_FROM_DUMP */ +#ifndef ICH_DESCRIPTORS_FROM_DUMP_ONLY /** Returns the integer representation of the component density with index \em idx in bytes or -1 if the correct size can not be determined. */ @@ -922,5 +916,4 @@ msg_pdbg2(" done.\n"); return ICH_RET_OK; } -#endif /* ICH_DESCRIPTORS_FROM_DUMP */ -#endif /* defined(__i386__) || defined(__x86_64__) */ +#endif /* ICH_DESCRIPTORS_FROM_DUMP_ONLY */ diff --git a/ich_descriptors.h b/ich_descriptors.h index 2c21598..e355e54 100644 --- a/ich_descriptors.h +++ b/ich_descriptors.h @@ -19,7 +19,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if defined(__i386__) || defined(__x86_64__) #ifndef __ICH_DESCRIPTORS_H__ #define __ICH_DESCRIPTORS_H__ 1 @@ -250,7 +249,6 @@ }; }; -#ifdef ICH_DESCRIPTORS_FROM_DUMP struct ich_desc_north_strap { union { uint32_t STRPs[1]; /* current maximum: ich8 */ @@ -561,18 +559,15 @@ }; } vscc_table[128]; }; -#endif /* ICH_DESCRIPTORS_FROM_DUMP */ struct ich_descriptors { struct ich_desc_content content; struct ich_desc_component component; struct ich_desc_region region; struct ich_desc_master master; -#ifdef ICH_DESCRIPTORS_FROM_DUMP struct ich_desc_north_strap north; struct ich_desc_south_strap south; struct ich_desc_upper_map upper; -#endif /* ICH_DESCRIPTORS_FROM_DUMP */ }; void prettyprint_ich_descriptors(enum ich_chipset cs, const struct ich_descriptors *desc); @@ -582,17 +577,11 @@ void prettyprint_ich_descriptor_region(const struct ich_descriptors *desc); void prettyprint_ich_descriptor_master(const struct ich_desc_master *master); -#ifdef ICH_DESCRIPTORS_FROM_DUMP - void prettyprint_ich_descriptor_upper_map(const struct ich_desc_upper_map *umap); void prettyprint_ich_descriptor_straps(enum ich_chipset cs, const struct ich_descriptors *desc); int read_ich_descriptors_from_dump(const uint32_t *dump, unsigned int len, struct ich_descriptors *desc); -#else /* ICH_DESCRIPTORS_FROM_DUMP */ - int read_ich_descriptors_via_fdo(void *spibar, struct ich_descriptors *desc); int getFCBA_component_density(enum ich_chipset cs, const struct ich_descriptors *desc, uint8_t idx); -#endif /* ICH_DESCRIPTORS_FROM_DUMP */ #endif /* __ICH_DESCRIPTORS_H__ */ -#endif /* defined(__i386__) || defined(__x86_64__) */ diff --git a/util/ich_descriptors_tool/Makefile b/util/ich_descriptors_tool/Makefile index 9cbc150..e312996 100644 --- a/util/ich_descriptors_tool/Makefile +++ b/util/ich_descriptors_tool/Makefile @@ -32,7 +32,7 @@ FLASHROM_CFLAGS += -MMD -MP -MF $(DEPPATH)/$((a)F).d # enables functions that populate the descriptor structs from plain binary dumps -FLASHROM_CFLAGS += -D ICH_DESCRIPTORS_FROM_DUMP +FLASHROM_CFLAGS += -D ICH_DESCRIPTORS_FROM_DUMP_ONLY FLASHROM_CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) OBJ = $(OBJATH)/$(SRC:%.c=%.o) -- To view, visit https://review.coreboot.org/19196 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I17f80733ab6486b8b9ce80860196195a412a38da Gerrit-PatchSet: 1 Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de>

1 0

Change in flashrom[staging]: Adapt CLI to use new libflashrom interface' print callback
by David Hendricks (Code Review) April 7, 2017

April 7, 2017

Hello Nico Huber, I'd like you to do a code review. Please visit https://review.coreboot.org/19192 to review the following change. Change subject: Adapt CLI to use new libflashrom interface' print callback ...................................................................... Adapt CLI to use new libflashrom interface' print callback This renames CLI's print() to fl_print_cb() and registers it through the new libflashrom interface. Change-Id: I02c0611ebe9560dd589bd3075e2a5c4b03a0e3ba Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M cli_classic.c M cli_output.c M flash.h 3 files changed, 11 insertions(+), 7 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/92/19192/1 diff --git a/cli_classic.c b/cli_classic.c index a2c2014..ac4c6f8 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -30,6 +30,7 @@ #include "flash.h" #include "flashchips.h" #include "programmer.h" +#include "libflashrom.h" static void cli_classic_usage(const char *name) { @@ -135,6 +136,8 @@ char *tempstr = NULL; char *pparam = NULL; + fl_set_log_callback((fl_log_callback_t *)&fl_print_cb); + print_version(); print_banner(); diff --git a/cli_output.c b/cli_output.c index feafbd2..2805dec 100644 --- a/cli_output.c +++ b/cli_output.c @@ -71,19 +71,19 @@ #endif /* !STANDALONE */ /* Please note that level is the verbosity, not the importance of the message. */ -int print(enum msglevel level, const char *fmt, ...) +int fl_print_cb(enum msglevel level, const char *fmt, va_list ap) { - va_list ap; int ret = 0; FILE *output_type = stdout; + + va_list logfile_args; + va_copy(logfile_args, ap); if (level < MSG_INFO) output_type = stderr; if (level <= verbose_screen) { - va_start(ap, fmt); ret = vfprintf(output_type, fmt, ap); - va_end(ap); /* msg_*spew often happens inside chip accessors in possibly * time-critical operations. Don't slow them down by flushing. */ if (level != MSG_SPEW) @@ -91,12 +91,11 @@ } #ifndef STANDALONE if ((level <= verbose_logfile) && logfile) { - va_start(ap, fmt); - ret = vfprintf(logfile, fmt, ap); - va_end(ap); + ret = vfprintf(logfile, fmt, logfile_args); if (level != MSG_SPEW) fflush(logfile); } #endif /* !STANDALONE */ + va_end(logfile_args); return ret; } diff --git a/flash.h b/flash.h index 5544160..3afa846 100644 --- a/flash.h +++ b/flash.h @@ -30,6 +30,7 @@ #include <stdio.h> #include <stdint.h> #include <stddef.h> +#include <stdarg.h> #include <stdbool.h> #if IS_WINDOWS #include <windows.h> @@ -319,6 +320,7 @@ MSG_DEBUG2 = 4, MSG_SPEW = 5, }; +int fl_print_cb(enum msglevel level, const char *fmt, va_list ap); /* Let gcc and clang check for correct printf-style format strings. */ int print(enum msglevel level, const char *fmt, ...) #ifdef __MINGW32__ -- To view, visit https://review.coreboot.org/19192 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I02c0611ebe9560dd589bd3075e2a5c4b03a0e3ba Gerrit-PatchSet: 1 Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de>

1 0

Change in flashrom[staging]: Kill doit()
by David Hendricks (Code Review) April 7, 2017

April 7, 2017

Hello Nico Huber, I'd like you to do a code review. Please visit https://review.coreboot.org/19193 to review the following change. Change subject: Kill doit() ...................................................................... Kill doit() No words can describe this feeling. Change-Id: I3e7befa18de955ad0ce16be4e4f21300ba4f3a42 Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M cli_classic.c M flash.h M flashrom.c 3 files changed, 90 insertions(+), 332 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/93/19193/1 diff --git a/cli_classic.c b/cli_classic.c index ac4c6f8..d7e17f7 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -530,24 +530,28 @@ goto out_shutdown; } - /* Always verify write operations unless -n is used. */ - if (write_it && !dont_verify_it) - verify_it = 1; + if (layoutfile) + fl_layout_set(fill_flash, get_global_layout()); - /* Map the selected flash chip again. */ - if (map_flash(fill_flash) != 0) { - ret = 1; - goto out_shutdown; - } + fl_flag_set(fill_flash, FL_FLAG_FORCE, !!force); + fl_flag_set(fill_flash, FL_FLAG_FORCE_BOARDMISMATCH, !!force_boardmismatch); + fl_flag_set(fill_flash, FL_FLAG_VERIFY_AFTER_WRITE, !dont_verify_it); + fl_flag_set(fill_flash, FL_FLAG_VERIFY_WHOLE_CHIP, true); /* FIXME: We should issue an unconditional chip reset here. This can be * done once we have a .reset function in struct flashchip. * Give the chip time to settle. */ programmer_delay(100000); - ret |= doit(fill_flash, force, filename, read_it, write_it, erase_it, verify_it); + if (read_it) + ret = do_read(fill_flash, filename); + else if (erase_it) + ret = do_erase(fill_flash); + else if (write_it) + ret = do_write(fill_flash, filename); + else if (verify_it) + ret = do_verify(fill_flash, filename); - unmap_flash(fill_flash); out_shutdown: programmer_shutdown(); out: diff --git a/flash.h b/flash.h index 3afa846..fc024ac 100644 --- a/flash.h +++ b/flash.h @@ -283,9 +283,12 @@ void print_banner(void); void list_programmers_linebreak(int startcol, int cols, int paren); int selfcheck(void); -int doit(struct flashctx *flash, int force, const char *filename, int read_it, int write_it, int erase_it, int verify_it); int read_buf_from_file(unsigned char *buf, unsigned long size, const char *filename); int write_buf_to_file(const unsigned char *buf, unsigned long size, const char *filename); +int do_read(struct flashctx *, const char *filename); +int do_erase(struct flashctx *); +int do_write(struct flashctx *, const char *const filename); +int do_verify(struct flashctx *, const char *const filename); /* Something happened that shouldn't happen, but we can go on. */ #define ERROR_NONFATAL 0x100 diff --git a/flashrom.c b/flashrom.c index 2f16e96..cf956ef 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1365,6 +1365,7 @@ #endif } +static int read_by_layout(struct flashctx *, void *); int read_flash_to_file(struct flashctx *flash, const char *filename) { unsigned long size = flash->chip->total_size * 1024; @@ -1382,7 +1383,7 @@ ret = 1; goto out_free; } - if (flash->chip->read(flash, buf, 0, size)) { + if (read_by_layout(flash, buf)) { msg_cerr("Read operation failed!\n"); ret = 1; goto out_free; @@ -1461,97 +1462,6 @@ return ret; } -static int erase_and_write_block_helper(struct flashctx *flash, - unsigned int start, unsigned int len, - uint8_t *curcontents, - uint8_t *newcontents, - int (*erasefn) (struct flashctx *flash, - unsigned int addr, - unsigned int len)) -{ - unsigned int starthere = 0, lenhere = 0; - int ret = 0, skip = 1, writecount = 0; - enum write_granularity gran = flash->chip->gran; - - /* curcontents and newcontents are opaque to walk_eraseregions, and - * need to be adjusted here to keep the impression of proper abstraction - */ - curcontents += start; - newcontents += start; - msg_cdbg(":"); - if (need_erase(curcontents, newcontents, len, gran)) { - msg_cdbg("E"); - ret = erasefn(flash, start, len); - if (ret) - return ret; - if (check_erased_range(flash, start, len)) { - msg_cerr("ERASE FAILED!\n"); - return -1; - } - /* Erase was successful. Adjust curcontents. */ - memset(curcontents, 0xff, len); - skip = 0; - } - /* get_next_write() sets starthere to a new value after the call. */ - while ((lenhere = get_next_write(curcontents + starthere, - newcontents + starthere, - len - starthere, &starthere, gran))) { - if (!writecount++) - msg_cdbg("W"); - /* Needs the partial write function signature. */ - ret = flash->chip->write(flash, newcontents + starthere, - start + starthere, lenhere); - if (ret) - return ret; - starthere += lenhere; - skip = 0; - } - if (skip) - msg_cdbg("S"); - else - all_skipped = false; - return ret; -} - -static int walk_eraseregions(struct flashctx *flash, int erasefunction, - int (*do_something) (struct flashctx *flash, - unsigned int addr, - unsigned int len, - uint8_t *param1, - uint8_t *param2, - int (*erasefn) ( - struct flashctx *flash, - unsigned int addr, - unsigned int len)), - void *param1, void *param2) -{ - int i, j; - unsigned int start = 0; - unsigned int len; - struct block_eraser eraser = flash->chip->block_erasers[erasefunction]; - - for (i = 0; i < NUM_ERASEREGIONS; i++) { - /* count==0 for all automatically initialized array - * members so the loop below won't be executed for them. - */ - len = eraser.eraseblocks[i].size; - for (j = 0; j < eraser.eraseblocks[i].count; j++) { - /* Print this for every block except the first one. */ - if (i || j) - msg_cdbg(", "); - msg_cdbg("0x%06x-0x%06x", start, - start + len - 1); - if (do_something(flash, start, len, param1, param2, - eraser.block_erase)) { - return 1; - } - start += len; - } - } - msg_cdbg("\n"); - return 0; -} - static int check_block_eraser(const struct flashctx *flash, int k, int log) { struct block_eraser eraser = flash->chip->block_erasers[k]; @@ -1575,71 +1485,6 @@ } // TODO: Once erase functions are annotated with allowed buses, check that as well. return 0; -} - -int erase_and_write_flash(struct flashctx *flash, uint8_t *oldcontents, uint8_t *newcontents) -{ - int k, ret = 1; - uint8_t *curcontents; - unsigned long size = flash->chip->total_size * 1024; - unsigned int usable_erasefunctions = count_usable_erasers(flash); - - msg_cinfo("Erasing and writing flash chip... "); - curcontents = malloc(size); - if (!curcontents) { - msg_gerr("Out of memory!\n"); - exit(1); - } - /* Copy oldcontents to curcontents to avoid clobbering oldcontents. */ - memcpy(curcontents, oldcontents, size); - - for (k = 0; k < NUM_ERASEFUNCTIONS; k++) { - if (k != 0) - msg_cinfo("Looking for another erase function.\n"); - if (!usable_erasefunctions) { - msg_cinfo("No usable erase functions left.\n"); - break; - } - msg_cdbg("Trying erase function %i... ", k); - if (check_block_eraser(flash, k, 1)) - continue; - usable_erasefunctions--; - ret = walk_eraseregions(flash, k, &erase_and_write_block_helper, - curcontents, newcontents); - /* If everything is OK, don't try another erase function. */ - if (!ret) - break; - /* Write/erase failed, so try to find out what the current chip - * contents are. If no usable erase functions remain, we can - * skip this: the next iteration will break immediately anyway. - */ - if (!usable_erasefunctions) - continue; - /* Reading the whole chip may take a while, inform the user even - * in non-verbose mode. - */ - msg_cinfo("Reading current flash chip contents... "); - if (flash->chip->read(flash, curcontents, 0, size)) { - /* Now we are truly screwed. Read failed as well. */ - msg_cerr("Can't read anymore! Aborting.\n"); - /* We have no idea about the flash chip contents, so - * retrying with another erase function is pointless. - */ - break; - } - msg_cinfo("done. "); - } - /* Free the scratchpad. */ - free(curcontents); - - if (ret) { - msg_cerr("FAILED!\n"); - } else { - if (all_skipped) - msg_cinfo("\nWarning: Chip content is identical to the requested image.\n"); - msg_cinfo("Erase/write done.\n"); - } - return ret; } /** @private */ @@ -2298,170 +2143,6 @@ return 0; } -/* This function signature is horrible. We need to design a better interface, - * but right now it allows us to split off the CLI code. - * Besides that, the function itself is a textbook example of abysmal code flow. - */ -int doit(struct flashctx *flash, int force, const char *filename, int read_it, - int write_it, int erase_it, int verify_it) -{ - uint8_t *oldcontents; - uint8_t *newcontents; - int ret = 0; - unsigned long size = flash->chip->total_size * 1024; - int read_all_first = 1; /* FIXME: Make this configurable. */ - - if (chip_safety_check(flash, force, read_it, write_it, erase_it, verify_it)) { - msg_cerr("Aborting.\n"); - return 1; - } - - if (normalize_romentries(flash)) { - msg_cerr("Requested regions can not be handled. Aborting.\n"); - return 1; - } - - /* Given the existence of read locks, we want to unlock for read, - * erase and write. - */ - if (flash->chip->unlock) - flash->chip->unlock(flash); - - if (read_it) { - return read_flash_to_file(flash, filename); - } - - oldcontents = malloc(size); - if (!oldcontents) { - msg_gerr("Out of memory!\n"); - exit(1); - } - /* Assume worst case: All bits are 0. */ - memset(oldcontents, 0x00, size); - newcontents = malloc(size); - if (!newcontents) { - msg_gerr("Out of memory!\n"); - exit(1); - } - /* Assume best case: All bits should be 1. */ - memset(newcontents, 0xff, size); - /* Side effect of the assumptions above: Default write action is erase - * because newcontents looks like a completely erased chip, and - * oldcontents being completely 0x00 means we have to erase everything - * before we can write. - */ - - if (erase_it) { - /* FIXME: Do we really want the scary warning if erase failed? - * After all, after erase the chip is either blank or partially - * blank or it has the old contents. A blank chip won't boot, - * so if the user wanted erase and reboots afterwards, the user - * knows very well that booting won't work. - */ - if (erase_and_write_flash(flash, oldcontents, newcontents)) { - emergency_help_message(); - ret = 1; - } - goto out; - } - - if (write_it || verify_it) { - if (read_buf_from_file(newcontents, size, filename)) { - ret = 1; - goto out; - } - -#if CONFIG_INTERNAL == 1 - if (programmer == PROGRAMMER_INTERNAL && cb_check_image(newcontents, size) < 0) { - if (force_boardmismatch) { - msg_pinfo("Proceeding anyway because user forced us to.\n"); - } else { - msg_perr("Aborting. You can override this with " - "-p internal:boardmismatch=force.\n"); - ret = 1; - goto out; - } - } -#endif - } - - /* Read the whole chip to be able to check whether regions need to be - * erased and to give better diagnostics in case write fails. - * The alternative is to read only the regions which are to be - * preserved, but in that case we might perform unneeded erase which - * takes time as well. - */ - if (read_all_first) { - msg_cinfo("Reading old flash chip contents... "); - if (flash->chip->read(flash, oldcontents, 0, size)) { - ret = 1; - msg_cinfo("FAILED.\n"); - goto out; - } - } - msg_cinfo("done.\n"); - - /* Build a new image taking the given layout into account. */ - if (build_new_image(flash, read_all_first, oldcontents, newcontents)) { - msg_gerr("Could not prepare the data to be written, aborting.\n"); - ret = 1; - goto out; - } - - // //////////////////////////////////////////////////////////// - - if (write_it && erase_and_write_flash(flash, oldcontents, newcontents)) { - msg_cerr("Uh oh. Erase/write failed. "); - if (read_all_first) { - msg_cerr("Checking if anything has changed.\n"); - msg_cinfo("Reading current flash chip contents... "); - if (!flash->chip->read(flash, newcontents, 0, size)) { - msg_cinfo("done.\n"); - if (!memcmp(oldcontents, newcontents, size)) { - nonfatal_help_message(); - ret = 1; - goto out; - } - msg_cerr("Apparently at least some data has changed.\n"); - } else - msg_cerr("Can't even read anymore!\n"); - emergency_help_message(); - ret = 1; - goto out; - } else - msg_cerr("\n"); - emergency_help_message(); - ret = 1; - goto out; - } - - /* Verify only if we either did not try to write (verify operation) or actually changed something. */ - if (verify_it && (!write_it || !all_skipped)) { - msg_cinfo("Verifying flash... "); - - if (write_it) { - /* Work around chips which need some time to calm down. */ - programmer_delay(1000*1000); - ret = verify_range(flash, newcontents, 0, size); - /* If we tried to write, and verification now fails, we - * might have an emergency situation. - */ - if (ret) - emergency_help_message(); - } else { - ret = compare_range(newcontents, oldcontents, 0, size); - } - if (!ret) - msg_cinfo("VERIFIED.\n"); - } - -out: - free(oldcontents); - free(newcontents); - return ret; -} - -/** @private */ static int prepare_flash_access(struct flashctx *const flash, const bool read_it, const bool write_it, const bool erase_it, const bool verify_it) @@ -2753,3 +2434,73 @@ } /** @} */ /* end fl-ops */ + +int do_read(struct flashctx *const flash, const char *const filename) +{ + if (prepare_flash_access(flash, true, false, false, false)) + return 1; + + const int ret = read_flash_to_file(flash, filename); + + unmap_flash(flash); + + return ret; +} + +int do_erase(struct flashctx *const flash) +{ + const int ret = fl_flash_erase(flash); + + /* FIXME: Do we really want the scary warning if erase failed? + * After all, after erase the chip is either blank or partially + * blank or it has the old contents. A blank chip won't boot, + * so if the user wanted erase and reboots afterwards, the user + * knows very well that booting won't work. + */ + if (ret) + emergency_help_message(); + + return ret; +} + +int do_write(struct flashctx *const flash, const char *const filename) +{ + const size_t flash_size = flash->chip->total_size * 1024; + int ret = 1; + + uint8_t *const newcontents = malloc(flash_size); + if (!newcontents) { + msg_gerr("Out of memory!\n"); + goto _free_ret; + } + + if (read_buf_from_file(newcontents, flash_size, filename)) + goto _free_ret; + + ret = fl_image_write(flash, newcontents, flash_size); + +_free_ret: + free(newcontents); + return ret; +} + +int do_verify(struct flashctx *const flash, const char *const filename) +{ + const size_t flash_size = flash->chip->total_size * 1024; + int ret = 1; + + uint8_t *const newcontents = malloc(flash_size); + if (!newcontents) { + msg_gerr("Out of memory!\n"); + goto _free_ret; + } + + if (read_buf_from_file(newcontents, flash_size, filename)) + goto _free_ret; + + ret = fl_image_verify(flash, newcontents, flash_size); + +_free_ret: + free(newcontents); + return ret; +} -- To view, visit https://review.coreboot.org/19193 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I3e7befa18de955ad0ce16be4e4f21300ba4f3a42 Gerrit-PatchSet: 1 Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de>

1 0

Change in flashrom[staging]: Make coreboot.org the upstream server
by David Hendricks (Code Review) April 7, 2017

April 7, 2017

David Hendricks has uploaded a new change for review. ( https://review.coreboot.org/19187 ) Change subject: Make coreboot.org the upstream server ...................................................................... Make coreboot.org the upstream server Change-Id: I9461dc4d2d461fff253392c4a1249a8835d5c9a4 Signed-off-by: David Hendricks <dhendricks(a)fb.com> --- M util/getrevision.sh 1 file changed, 2 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/87/19187/1 diff --git a/util/getrevision.sh b/util/getrevision.sh index 03d0b1e..2ba3178 100755 --- a/util/getrevision.sh +++ b/util/getrevision.sh @@ -32,8 +32,8 @@ # List of important upstream branches... upstream_branches="stable staging" -upstream_url="https://flashrom.org/git/flashrom.git" -upstream_patterns="github\.com.flashrom/flashrom(\.git)?|flashrom\.org.git/flashrom(\.git)?" +upstream_url="https://review.coreboot.org/flashrom.git" +upstream_patterns="github\.com.flashrom/flashrom(\.git)?|flashrom\.org.git/flashrom(\.git)?|coreboot\.org.*/flashrom(\.git)?" upcache_prefix="refs/flashrom_org/" # Generate upcache_refs -- To view, visit https://review.coreboot.org/19187 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I9461dc4d2d461fff253392c4a1249a8835d5c9a4 Gerrit-PatchSet: 1 Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com>

1 0

Change in flashrom[staging]: Give layouts their own type
by David Hendricks (Code Review) April 7, 2017

April 7, 2017

Hello Nico Huber, I'd like you to do a code review. Please visit https://review.coreboot.org/19188 to review the following change. Change subject: Give layouts their own type ...................................................................... Give layouts their own type Introduce `struct fl_layout` and refactor layout.c a little, so we can reuse the layout from there and have other sources of layouts beside it. I didn't want to clutter up flash.h any more. So things went into a new layout.h. Change-Id: Ic728fc9f64958f62a2e2f321f4ec440e8658c808 Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M flash.h M layout.c A layout.h 3 files changed, 99 insertions(+), 50 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/88/19188/1 diff --git a/flash.h b/flash.h index da049d1..bf381cf 100644 --- a/flash.h +++ b/flash.h @@ -37,6 +37,8 @@ #undef max #endif +#include "layout.h" + #define ERROR_PTR ((void*)-1) /* Error codes */ @@ -46,14 +48,6 @@ /* TODO: check using code for correct usage of types */ typedef uintptr_t chipaddr; #define PRIxPTR_WIDTH ((int)(sizeof(uintptr_t)*2)) - -/* Types and macros regarding the maximum flash space size supported by generic code. */ -typedef uint32_t chipoff_t; /* Able to store any addressable offset within a supported flash memory. */ -typedef uint32_t chipsize_t; /* Able to store the number of bytes of any supported flash memory. */ -#define FL_MAX_CHIPOFF_BITS (24) -#define FL_MAX_CHIPOFF ((chipoff_t)(1ULL<<FL_MAX_CHIPOFF_BITS)-1) -#define PRIxCHIPOFF "06"PRIx32 -#define PRIuCHIPSIZE PRIu32 int register_shutdown(int (*function) (void *data), void *data); int shutdown_free(void *data); diff --git a/layout.c b/layout.c index f71eeaa..9eadb22 100644 --- a/layout.c +++ b/layout.c @@ -25,24 +25,20 @@ #include <limits.h> #include "flash.h" #include "programmer.h" +#include "layout.h" -#define MAX_ROMLAYOUT 32 - -typedef struct { - chipoff_t start; - chipoff_t end; - unsigned int included; - char name[256]; -} romentry_t; - -/* rom_entries store the entries specified in a layout file and associated run-time data */ -static romentry_t rom_entries[MAX_ROMLAYOUT]; -static int num_rom_entries = 0; /* the number of successfully parsed rom_entries */ +struct fl_romentry entries[MAX_ROMLAYOUT]; +static struct fl_layout layout = { entries, 0 }; /* include_args holds the arguments specified at the command line with -i. They must be processed at some point - * so that desired regions are marked as "included" in the rom_entries list. */ + * so that desired regions are marked as "included" in the layout. */ static char *include_args[MAX_ROMLAYOUT]; static int num_include_args = 0; /* the number of valid include_args. */ + +const struct fl_layout *get_global_layout(void) +{ + return &layout; +} #ifndef __LIBPAYLOAD__ int read_romlayout(const char *name) @@ -62,13 +58,13 @@ while (!feof(romlayout)) { char *tstr1, *tstr2; - if (num_rom_entries >= MAX_ROMLAYOUT) { + if (layout.num_entries >= MAX_ROMLAYOUT) { msg_gerr("Maximum number of ROM images (%i) in layout " "file reached.\n", MAX_ROMLAYOUT); (void)fclose(romlayout); return 1; } - if (2 != fscanf(romlayout, "%255s %255s\n", tempstr, rom_entries[num_rom_entries].name)) + if (2 != fscanf(romlayout, "%255s %255s\n", tempstr, layout.entries[layout.num_entries].name)) continue; #if 0 // fscanf does not like arbitrary comments like that :( later @@ -83,16 +79,16 @@ (void)fclose(romlayout); return 1; } - rom_entries[num_rom_entries].start = strtol(tstr1, (char **)NULL, 16); - rom_entries[num_rom_entries].end = strtol(tstr2, (char **)NULL, 16); - rom_entries[num_rom_entries].included = 0; - num_rom_entries++; + layout.entries[layout.num_entries].start = strtol(tstr1, (char **)NULL, 16); + layout.entries[layout.num_entries].end = strtol(tstr2, (char **)NULL, 16); + layout.entries[layout.num_entries].included = 0; + layout.num_entries++; } - for (i = 0; i < num_rom_entries; i++) { + for (i = 0; i < layout.num_entries; i++) { msg_gdbg("romlayout %08x - %08x named %s\n", - rom_entries[i].start, - rom_entries[i].end, rom_entries[i].name); + layout.entries[i].start, + layout.entries[i].end, layout.entries[i].name); } (void)fclose(romlayout); @@ -140,13 +136,13 @@ { int i; - if (num_rom_entries == 0) + if (layout.num_entries == 0) return -1; msg_gspew("Looking for region \"%s\"... ", name); - for (i = 0; i < num_rom_entries; i++) { - if (!strcmp(rom_entries[i].name, name)) { - rom_entries[i].included = 1; + for (i = 0; i < layout.num_entries; i++) { + if (!strcmp(layout.entries[i].name, name)) { + layout.entries[i].included = 1; msg_gspew("found.\n"); return i; } @@ -167,7 +163,7 @@ return 0; /* User has specified an area, but no layout file is loaded. */ - if (num_rom_entries == 0) { + if (layout.num_entries == 0) { msg_gerr("Region requested (with -i \"%s\"), " "but no layout data is available.\n", include_args[0]); @@ -200,22 +196,22 @@ } num_include_args = 0; - for (i = 0; i < num_rom_entries; i++) { - rom_entries[i].included = 0; + for (i = 0; i < layout.num_entries; i++) { + layout.entries[i].included = 0; } - num_rom_entries = 0; + layout.num_entries = 0; } -romentry_t *get_next_included_romentry(unsigned int start) +struct fl_romentry *get_next_included_romentry(unsigned int start) { int i; unsigned int best_start = UINT_MAX; - romentry_t *best_entry = NULL; - romentry_t *cur; + struct fl_romentry *best_entry = NULL; + struct fl_romentry *cur; /* First come, first serve for overlapping regions. */ - for (i = 0; i < num_rom_entries; i++) { - cur = &rom_entries[i]; + for (i = 0; i < layout.num_entries; i++) { + cur = &layout.entries[i]; if (!cur->included) continue; /* Already past the current entry? */ @@ -240,16 +236,16 @@ int ret = 0; int i; - for (i = 0; i < num_rom_entries; i++) { - if (rom_entries[i].start >= total_size || rom_entries[i].end >= total_size) { + for (i = 0; i < layout.num_entries; i++) { + if (layout.entries[i].start >= total_size || layout.entries[i].end >= total_size) { msg_gwarn("Warning: Address range of region \"%s\" exceeds the current chip's " - "address space.\n", rom_entries[i].name); - if (rom_entries[i].included) + "address space.\n", layout.entries[i].name); + if (layout.entries[i].included) ret = 1; } - if (rom_entries[i].start > rom_entries[i].end) { + if (layout.entries[i].start > layout.entries[i].end) { msg_gerr("Error: Size of the address range of region \"%s\" is not positive.\n", - rom_entries[i].name); + layout.entries[i].name); ret = 1; } } @@ -281,7 +277,7 @@ int build_new_image(struct flashctx *flash, bool oldcontents_valid, uint8_t *oldcontents, uint8_t *newcontents) { unsigned int start = 0; - romentry_t *entry; + struct fl_romentry *entry; unsigned int size = flash->chip->total_size * 1024; /* If no regions were specified for inclusion, assume diff --git a/layout.h b/layout.h new file mode 100644 index 0000000..3aebe8a --- /dev/null +++ b/layout.h @@ -0,0 +1,59 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2005-2008 coresystems GmbH + * (Written by Stefan Reinauer <stepan(a)coresystems.de> for coresystems GmbH) + * Copyright (C) 2011-2013 Stefan Tauner + * Copyright (C) 2016 secunet Security Networks AG + * (Written by Nico Huber <nico.huber(a)secunet.com> for secunet) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __LAYOUT_H__ +#define __LAYOUT_H__ 1 + +/* Types and macros regarding the maximum flash space size supported by generic code. */ +typedef uint32_t chipoff_t; /* Able to store any addressable offset within a supported flash memory. */ +typedef uint32_t chipsize_t; /* Able to store the number of bytes of any supported flash memory. */ +#define FL_MAX_CHIPOFF_BITS (24) +#define FL_MAX_CHIPOFF ((chipoff_t)(1ULL<<FL_MAX_CHIPOFF_BITS)-1) +#define PRIxCHIPOFF "06"PRIx32 +#define PRIuCHIPSIZE PRIu32 + +#define MAX_ROMLAYOUT 32 + +struct fl_romentry { + chipoff_t start; + chipoff_t end; + bool included; + char name[256]; +}; + +struct fl_layout { + /* entries store the entries specified in a layout file and associated run-time data */ + struct fl_romentry *entries; + /* the number of successfully parsed entries */ + int num_entries; +}; + +struct fl_layout_single { + struct fl_layout base; + struct fl_romentry entry; +}; + +const struct fl_layout *get_global_layout(void); + +#endif /* !__LAYOUT_H__ */ -- To view, visit https://review.coreboot.org/19188 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: Ic728fc9f64958f62a2e2f321f4ec440e8658c808 Gerrit-PatchSet: 1 Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de>

1 0

Change in flashrom[staging]: Add functions to read/erase/write/verify by layout
by David Hendricks (Code Review) April 7, 2017

April 7, 2017

Hello Nico Huber, I'd like you to do a code review. Please visit https://review.coreboot.org/19189 to review the following change. Change subject: Add functions to read/erase/write/verify by layout ...................................................................... Add functions to read/erase/write/verify by layout Inspired by Lynxis' related work, this implements a foundation for layout based flash access. All operations iterate over the given layout regions. Erase and write then walk, per region, over all erase blocks in an inner loop (which might not be what we want, see note on optimization below). Special care has been taken that flash content is merged properly, in case an erase block is only partially covered by a layout region or even affects mul- tiple regions. A note on performance: In the case an erase block affects multiple regions, it will probably be read, erased and written for each region. Another approach would be to walk all erase blocks once and check for each erase block which regions it touches (i.e. for each erase block, merge data pontentially from the flash and all layout regions, then flash the combined data). That might result in cleaner code. I haven't tried it yet, though. Change-Id: I060d9c42d71c83c3f95a6189cd22dad8b1504784 Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M flash.h M flashrom.c 2 files changed, 327 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/89/19189/1 diff --git a/flash.h b/flash.h index bf381cf..be1134a 100644 --- a/flash.h +++ b/flash.h @@ -216,6 +216,7 @@ uintptr_t physical_registers; chipaddr virtual_registers; struct registered_master *mst; + const struct fl_layout *layout; }; /* Timing used in probe routines. ZERO is -2 to differentiate between an unset diff --git a/flashrom.c b/flashrom.c index 1a43303..b6ba7e0 100644 --- a/flashrom.c +++ b/flashrom.c @@ -5,6 +5,8 @@ * Copyright (C) 2004 Tyan Corp <yhlu(a)tyan.com> * Copyright (C) 2005-2008 coresystems GmbH * Copyright (C) 2008,2009 Carl-Daniel Hailfinger + * Copyright (C) 2016 secunet Security Networks AG + * (Written by Nico Huber <nico.huber(a)secunet.com> for secunet) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -1640,6 +1642,330 @@ return ret; } +/** @private */ +static const struct fl_layout *get_layout(const struct flashctx *const flashctx, + struct fl_layout_single *const fallback) +{ + if (flashctx->layout && flashctx->layout->num_entries) + return flashctx->layout; + + fallback->base.entries = &fallback->entry; + fallback->base.num_entries = 1; + fallback->entry.start = 0; + fallback->entry.end = flashctx->chip->total_size * 1024 - 1; + fallback->entry.included = true; + strcpy(fallback->entry.name, "complete flash"); + return &fallback->base; +} + +/** + * @brief Reads the included layout regions into a buffer. + * + * If there is no layout set in the given flash context, the whole chip will + * be read. + * + * @param flashctx Flash context to be used. + * @param buffer Buffer of full chip size to read into. + * @return 0 on success, + * 1 if any read fails. + */ +static int read_by_layout(struct flashctx *const flashctx, void *const buffer) +{ + struct fl_layout_single fallback_layout; + const struct fl_layout *const layout = get_layout(flashctx, &fallback_layout); + + size_t i; + for (i = 0; i < layout->num_entries; ++i) { + if (!layout->entries[i].included) + continue; + + const chipoff_t region_start = layout->entries[i].start; + const chipsize_t region_len = layout->entries[i].end - layout->entries[i].start + 1; + + if (flashctx->chip->read(flashctx, buffer + region_start, region_start, region_len)) + return 1; + } + return 0; +} + +typedef int (*erasefn_t)(struct flashctx *, unsigned int addr, unsigned int len); +struct walk_info { + uint8_t *curcontents; + const uint8_t *newcontents; + unsigned int region_start; + unsigned int region_end; + unsigned int erase_start; + unsigned int erase_end; +}; +typedef int (*per_blockfn_t)(struct flashctx *, const struct walk_info *, erasefn_t); + +/** @private */ +static int walk_eraseblocks(struct flashctx *const flashctx, + struct walk_info *const info, + const int erasefunction, per_blockfn_t per_blockfn) +{ + int ret; + int i, j; + bool first = true; + struct block_eraser *const eraser = &flashctx->chip->block_erasers[erasefunction]; + + info->erase_start = 0; + for (i = 0; i < NUM_ERASEREGIONS; i++) { + /* count==0 for all automatically initialized array + * members so the loop below won't be executed for them. + */ + for (j = 0; j < eraser->eraseblocks[i].count; ++j, info->erase_start = info->erase_end + 1) { + info->erase_end = info->erase_start + eraser->eraseblocks[i].size - 1; + + /* Skip any eraseblock that is completely outside the current region. */ + if (info->erase_end < info->region_start || info->region_end < info->erase_start) + continue; + + /* Print this for every block except the first one. */ + if (first) + first = false; + else + msg_cdbg(", "); + msg_cdbg("0x%06x-0x%06x:", info->erase_start, info->erase_end); + + ret = per_blockfn(flashctx, info, eraser->block_erase); + if (ret) + return ret; + } + } + msg_cdbg("\n"); + return 0; +} + +/** @private */ +static int walk_by_layout(struct flashctx *const flashctx, struct walk_info *const info, + per_blockfn_t per_blockfn) +{ + struct fl_layout_single fallback_layout; + const struct fl_layout *const layout = get_layout(flashctx, &fallback_layout); + + all_skipped = true; + msg_cinfo("Erasing and writing flash chip... "); + + size_t i; + for (i = 0; i < layout->num_entries; ++i) { + if (!layout->entries[i].included) + continue; + + info->region_start = layout->entries[i].start; + info->region_end = layout->entries[i].end; + + size_t j; + int ret = 1; + for (j = 0; j < NUM_ERASEFUNCTIONS; ++j) { + if (j != 0) + msg_cinfo("Looking for another erase function.\n"); + msg_cdbg("Trying erase function %zi... ", j); + if (check_block_eraser(flashctx, j, 1)) + continue; + + ret = walk_eraseblocks(flashctx, info, j, per_blockfn); + if (ret != 1) + break; + + if (info->curcontents) { + msg_cinfo("Reading current flash chip contents... "); + if (read_by_layout(flashctx, info->curcontents)) { + /* Now we are truly screwed. Read failed as well. */ + msg_cerr("Can't read anymore! Aborting.\n"); + /* We have no idea about the flash chip contents, so + * retrying with another erase function is pointless. + */ + ret = 2; + break; + } + msg_cinfo("done. "); + } + } + if (ret == 1) + msg_cinfo("No usable erase functions left.\n"); + if (ret) { + msg_cerr("FAILED!\n"); + return 1; + } + } + if (all_skipped) + msg_cinfo("\nWarning: Chip content is identical to the requested image.\n"); + msg_cinfo("Erase/write done.\n"); + return 0; +} + +/** @private */ +static int erase_block(struct flashctx *const flashctx, const struct walk_info *const info, erasefn_t erasefn) +{ + const unsigned int erase_len = info->erase_end + 1 - info->erase_start; + + all_skipped = false; + + msg_cdbg("E"); + if (erasefn(flashctx, info->erase_start, erase_len)) + return 1; + if (check_erased_range(flashctx, info->erase_start, erase_len)) { + msg_cerr("ERASE FAILED!\n"); + return 1; + } + return 0; +} + +/** + * @brief Erases the included layout regions. + * + * If there is no layout set in the given flash context, the whole chip will + * be erased. + * + * @param flashctx Flash context to be used. + * @param buffer Buffer of full chip size to read into. + * @return 0 on success, + * 1 if all available erase functions failed. + */ +static int erase_by_layout(struct flashctx *const flashctx) +{ + struct walk_info info = { 0 }; + return walk_by_layout(flashctx, &info, erase_block); +} + +/** @private */ +static int read_erase_write_block(struct flashctx *const flashctx, + const struct walk_info *const info, erasefn_t erasefn) +{ + const unsigned int erase_len = info->erase_end + 1 - info->erase_start; + const bool region_unaligned = info->region_start > info->erase_start || + info->erase_end > info->region_end; + const uint8_t *newcontents = NULL; + int ret = 2; + /* + * Merge current flash contents into new buffer if the region is not erase-block + * aligned. + * Note: We can not use newcontents here as this erase block might overlap + * other regions as well. So we would invalidate data to be written there. + */ + if (region_unaligned) { + msg_cdbg("R"); + uint8_t *const newc = malloc(erase_len); + if (!newc) { + msg_cerr("Out of memory!\n"); + return 1; + } + memcpy(newc, info->newcontents + info->erase_start, erase_len); + if (info->region_start > info->erase_start && + flashctx->chip->read(flashctx, newc, + info->erase_start, info->region_start - info->erase_start)) { + msg_cerr("Can't read! Aborting.\n"); + goto _free_ret; + } + if (info->erase_end > info->region_end && + flashctx->chip->read(flashctx, newc - info->erase_start + info->region_end + 1, + info->region_end + 1, info->erase_end - info->region_end)) { + msg_cerr("Can't read! Aborting.\n"); + goto _free_ret; + } + newcontents = newc; + } else { + newcontents = info->newcontents + info->erase_start; + } + + ret = 1; + bool skipped = true; + uint8_t *const curcontents = info->curcontents + info->erase_start; + if (need_erase(curcontents, newcontents, erase_len, flashctx->chip->gran)) { + if (erase_block(flashctx, info, erasefn)) + goto _free_ret; + /* Erase was successful. Adjust curcontents. */ + memset(curcontents, 0xff, erase_len); + skipped = false; + } + + unsigned int starthere = 0, lenhere = 0, writecount = 0; + /* get_next_write() sets starthere to a new value after the call. */ + while ((lenhere = get_next_write(curcontents + starthere, newcontents + starthere, + erase_len - starthere, &starthere, flashctx->chip->gran))) { + if (!writecount++) + msg_cdbg("W"); + /* Needs the partial write function signature. */ + if (flashctx->chip->write(flashctx, newcontents + starthere, + info->erase_start + starthere, lenhere)) + goto _free_ret; + starthere += lenhere; + skipped = false; + } + if (skipped) + msg_cdbg("S"); + else + all_skipped = false; + + /* Update curcontents, other regions with overlapping erase blocks + might rely on this. */ + memcpy(curcontents, newcontents, erase_len); + ret = 0; + +_free_ret: + if (region_unaligned) + free((void *)newcontents); + return ret; +} + +/** + * @brief Writes the included layout regions from a given image. + * + * If there is no layout set in the given flash context, the whole image + * will be written. + * + * @param flashctx Flash context to be used. + * @param curcontents A buffer of full chip size with current chip contents of included regions. + * @param newcontents The new image to be written. + * @return 0 on success, + * 1 if anything has gone wrong. + */ +static int write_by_layout(struct flashctx *const flashctx, + void *const curcontents, const void *const newcontents) +{ + struct walk_info info; + info.curcontents = curcontents; + info.newcontents = newcontents; + return walk_by_layout(flashctx, &info, read_erase_write_block); +} + +/** + * @brief Compares the included layout regions with content from a buffer. + * + * If there is no layout set in the given flash context, the whole chip's + * contents will be compared. + * + * @param flashctx Flash context to be used. + * @param curcontents A buffer of full chip size to read current chip contents into. + * @param newcontents The new image to compare to. + * @return 0 on success, + * 1 if reading failed, + * 3 if the contents don't match. + */ +static int verify_by_layout(struct flashctx *const flashctx, + void *const curcontents, const void *const newcontents) +{ + struct fl_layout_single fallback_layout; + const struct fl_layout *const layout = get_layout(flashctx, &fallback_layout); + + size_t i; + for (i = 0; i < layout->num_entries; ++i) { + if (!layout->entries[i].included) + continue; + + const chipoff_t region_start = layout->entries[i].start; + const chipsize_t region_len = layout->entries[i].end - layout->entries[i].start + 1; + + if (flashctx->chip->read(flashctx, curcontents + region_start, region_start, region_len)) + return 1; + if (compare_range(newcontents + region_start, curcontents + region_start, + region_start, region_len)) + return 3; + } + return 0; +} + static void nonfatal_help_message(void) { msg_gerr("Good, writing to the flash chip apparently didn't do anything.\n"); -- To view, visit https://review.coreboot.org/19189 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I060d9c42d71c83c3f95a6189cd22dad8b1504784 Gerrit-PatchSet: 1 Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de>

1 0

Change in flashrom[staging]: Add a convenient libflashrom interface
by David Hendricks (Code Review) April 7, 2017

April 7, 2017

Hello Nico Huber, I'd like you to do a code review. Please visit https://review.coreboot.org/19190 to review the following change. Change subject: Add a convenient libflashrom interface ...................................................................... Add a convenient libflashrom interface This adds a minimal libflashrom interface based on the draft in the wiki. While the glue code in libflashrom.c is build on top of the existing code instead on overhauling it, the interface in libflashrom.h is supposed to be stable. So we can keep the interface and adapt internals later if favoured, without breaking clients. A new make target, libinstall, is also added. It installs libflashrom.a and libflashrom.h in lib/ and include/ dirs respectively. This commit breaks build of the cli. It will be fixed with a follow-up commit. v2: Rebase and fixes by Anton Kochkov. v3: o fl_image_*() rewritten with layout support (touch only included regions). o Moved read/erase/write/verify operations to flashrom.c. o Added layout pointer and flags to the flash context. Change-Id: Ibd25aa58c165119a9f31ee9e9285bd793693d884 Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M Makefile M flash.h M flashrom.c A libflashrom.c A libflashrom.h 5 files changed, 695 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/90/19190/1 diff --git a/Makefile b/Makefile index 8ddd6f3..b7f1991 100644 --- a/Makefile +++ b/Makefile @@ -519,7 +519,7 @@ ############################################################################### # Library code. -LIB_OBJS = layout.o flashrom.o udelay.o programmer.o helpers.o +LIB_OBJS = libflashrom.o layout.o flashrom.o udelay.o programmer.o helpers.o ############################################################################### # Frontend related stuff. @@ -1362,6 +1362,12 @@ $(INSTALL) -m 0755 $(PROGRAM)$(EXEC_SUFFIX) $(DESTDIR)$(PREFIX)/sbin $(INSTALL) -m 0644 $(PROGRAM).8 $(DESTDIR)$(MANDIR)/man8 +libinstall: libflashrom.a libflashrom.h + mkdir -p $(DESTDIR)$(PREFIX)/lib + $(INSTALL) -m 0644 libflashrom.a $(DESTDIR)$(PREFIX)/lib + mkdir -p $(DESTDIR)$(PREFIX)/include + $(INSTALL) -m 0644 libflashrom.h $(DESTDIR)$(PREFIX)/include + _export: $(PROGRAM).8 @rm -rf "$(EXPORTDIR)/flashrom-$(RELEASENAME)" @mkdir -p "$(EXPORTDIR)/flashrom-$(RELEASENAME)" diff --git a/flash.h b/flash.h index be1134a..5544160 100644 --- a/flash.h +++ b/flash.h @@ -217,6 +217,12 @@ chipaddr virtual_registers; struct registered_master *mst; const struct fl_layout *layout; + struct { + bool force; + bool force_boardmismatch; + bool verify_after_write; + bool verify_whole_chip; + } flags; }; /* Timing used in probe routines. ZERO is -2 to differentiate between an unset diff --git a/flashrom.c b/flashrom.c index b6ba7e0..2f16e96 100644 --- a/flashrom.c +++ b/flashrom.c @@ -2460,3 +2460,296 @@ free(newcontents); return ret; } + +/** @private */ +static int prepare_flash_access(struct flashctx *const flash, + const bool read_it, const bool write_it, + const bool erase_it, const bool verify_it) +{ + if (chip_safety_check(flash, flash->flags.force, read_it, write_it, erase_it, verify_it)) { + msg_cerr("Aborting.\n"); + return 1; + } + + if (flash->layout == get_global_layout() && normalize_romentries(flash)) { + msg_cerr("Requested regions can not be handled. Aborting.\n"); + return 1; + } + + if (map_flash(flash) != 0) + return 1; + + /* Given the existence of read locks, we want to unlock for read, + erase and write. */ + if (flash->chip->unlock) + flash->chip->unlock(flash); + + return 0; +} + +/** + * @addtogroup fl-flash + * @{ + */ + +/** + * @brief Erase the specified ROM chip. + * + * If a layout is set in the given flash context, only included regions + * will be erased. + * + * @param flashctx The context of the flash chip to erase. + * @return 0 on success. + */ +int fl_flash_erase(struct flashctx *const flashctx) +{ + if (prepare_flash_access(flashctx, false, false, true, false)) + return 1; + + const int ret = erase_by_layout(flashctx); + + unmap_flash(flashctx); + + return ret; +} + +/** @} */ /* end fl-flash */ + +/** + * @defgroup fl-ops Operations + * @{ + */ + +/** + * @brief Read the current image from the specified ROM chip. + * + * If a layout is set in the specified flash context, only included regions + * will be read. + * + * @param flashctx The context of the flash chip. + * @param buffer Target buffer to write image to. + * @param buffer_len Size of target buffer in bytes. + * @return 0 on success, + * 2 if buffer_len is to short for the flash chip's contents, + * or 1 on any other failure. + */ +int fl_image_read(struct flashctx *const flashctx, void *const buffer, const size_t buffer_len) +{ + const size_t flash_size = flashctx->chip->total_size * 1024; + + if (flash_size > buffer_len) + return 2; + + if (prepare_flash_access(flashctx, true, false, false, false)) + return 1; + + msg_cinfo("Reading flash... "); + + int ret = 1; + if (read_by_layout(flashctx, buffer)) { + msg_cerr("Read operation failed!\n"); + msg_cinfo("FAILED.\n"); + goto _unmap_ret; + } + msg_cinfo("done.\n"); + ret = 0; + +_unmap_ret: + unmap_flash(flashctx); + return ret; +} + +/** @private */ +static void combine_image_by_layout(const struct flashctx *const flashctx, + uint8_t *const newcontents, const uint8_t *const oldcontents) +{ + struct fl_layout_single fallback_layout; + const struct fl_layout *const layout = get_layout(flashctx, &fallback_layout); + + size_t i; + for (i = 0; i < layout->num_entries; ++i) { + if (layout->entries[i].included) + continue; + + const chipoff_t region_start = layout->entries[i].start; + const chipsize_t region_len = layout->entries[i].end - layout->entries[i].start + 1; + + memcpy(newcontents + region_start, oldcontents + region_start, region_len); + } +} + +/** + * @brief Write the specified image to the ROM chip. + * + * If a layout is set in the specified flash context, only erase blocks that + * lap included regions will be touched. + * + * @param flashctx The context of the flash chip. + * @param buffer Source buffer to read image from. + * @param buffer_len Size of source buffer in bytes. + * @return 0 on success, + * 4 if buffer_len doesn't match the size of the flash chip, + * 3 if write was tried but nothing has changed, + * 2 if write failed and flash contents changed, + * or 1 on any other failure. + */ +int fl_image_write(struct flashctx *const flashctx, void *const buffer, const size_t buffer_len) +{ + const size_t flash_size = flashctx->chip->total_size * 1024; + const bool verify_all = flashctx->flags.verify_whole_chip; + const bool verify = flashctx->flags.verify_after_write; + + if (buffer_len != flash_size) + return 4; + + int ret = 1; + + uint8_t *const newcontents = buffer; + uint8_t *const curcontents = malloc(flash_size); + uint8_t *oldcontents = NULL; + if (verify_all) + oldcontents = malloc(flash_size); + if (!curcontents || (verify_all && !oldcontents)) { + msg_gerr("Out of memory!\n"); + goto _free_ret; + } + +#if CONFIG_INTERNAL == 1 + if (programmer == PROGRAMMER_INTERNAL && cb_check_image(newcontents, flash_size) < 0) { + if (flashctx->flags.force_boardmismatch) { + msg_pinfo("Proceeding anyway because user forced us to.\n"); + } else { + msg_perr("Aborting. You can override this with " + "-p internal:boardmismatch=force.\n"); + goto _free_ret; + } + } +#endif + + if (prepare_flash_access(flashctx, false, true, false, verify)) + goto _free_ret; + + /* Read the whole chip to be able to check whether regions need to be + * erased and to give better diagnostics in case write fails. + * The alternative is to read only the regions which are to be + * preserved, but in that case we might perform unneeded erase which + * takes time as well. + */ + msg_cinfo("Reading old flash chip contents... "); + if (verify_all) { + if (flashctx->chip->read(flashctx, oldcontents, 0, flash_size)) { + msg_cinfo("FAILED.\n"); + goto _unmap_ret; + } + memcpy(curcontents, oldcontents, flash_size); + } else { + if (read_by_layout(flashctx, curcontents)) { + msg_cinfo("FAILED.\n"); + goto _unmap_ret; + } + } + msg_cinfo("done.\n"); + + if (write_by_layout(flashctx, curcontents, newcontents)) { + msg_cerr("Uh oh. Erase/write failed. "); + ret = 2; + if (verify_all) { + msg_cerr("Checking if anything has changed.\n"); + msg_cinfo("Reading current flash chip contents... "); + if (!flashctx->chip->read(flashctx, curcontents, 0, flash_size)) { + msg_cinfo("done.\n"); + if (!memcmp(oldcontents, curcontents, flash_size)) { + nonfatal_help_message(); + goto _unmap_ret; + } + msg_cerr("Apparently at least some data has changed.\n"); + } else + msg_cerr("Can't even read anymore!\n"); + emergency_help_message(); + goto _unmap_ret; + } else + msg_cerr("\n"); + emergency_help_message(); + goto _unmap_ret; + } + + /* Verify only if we actually changed something. */ + if (verify && !all_skipped) { + const struct fl_layout *const layout_bak = flashctx->layout; + + msg_cinfo("Verifying flash... "); + + /* Work around chips which need some time to calm down. */ + programmer_delay(1000*1000); + + if (verify_all) { + combine_image_by_layout(flashctx, newcontents, oldcontents); + flashctx->layout = NULL; + } + ret = verify_by_layout(flashctx, curcontents, newcontents); + flashctx->layout = layout_bak; + /* If we tried to write, and verification now fails, we + * might have an emergency situation. + */ + if (ret) + emergency_help_message(); + else + msg_cinfo("VERIFIED.\n"); + } else { + /* We didn't change anything. */ + ret = 0; + } + +_unmap_ret: + unmap_flash(flashctx); +_free_ret: + free(oldcontents); + free(curcontents); + return ret; +} + +/** + * @brief Verify the ROM chip's contents with the specified image. + * + * If a layout is set in the specified flash context, only included regions + * will be verified. + * + * @param flashctx The context of the flash chip. + * @param buffer Source buffer to verify with. + * @param buffer_len Size of source buffer in bytes. + * @return 0 on success, + * 3 if the chip's contents don't match, + * 2 if buffer_len doesn't match the size of the flash chip, + * or 1 on any other failure. + */ +int fl_image_verify(struct flashctx *const flashctx, const void *const buffer, const size_t buffer_len) +{ + const size_t flash_size = flashctx->chip->total_size * 1024; + + if (buffer_len != flash_size) + return 2; + + const uint8_t *const newcontents = buffer; + uint8_t *const curcontents = malloc(flash_size); + if (!curcontents) { + msg_gerr("Out of memory!\n"); + return 1; + } + + int ret = 1; + + if (prepare_flash_access(flashctx, false, false, false, true)) + goto _free_ret; + + msg_cinfo("Verifying flash... "); + ret = verify_by_layout(flashctx, curcontents, newcontents); + if (!ret) + msg_cinfo("VERIFIED.\n"); + + unmap_flash(flashctx); +_free_ret: + free(curcontents); + return ret; +} + +/** @} */ /* end fl-ops */ diff --git a/libflashrom.c b/libflashrom.c new file mode 100644 index 0000000..eab9548 --- /dev/null +++ b/libflashrom.c @@ -0,0 +1,319 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2012, 2016 secunet Security Networks AG + * (Written by Nico Huber <nico.huber(a)secunet.com> for secunet) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +/** + * @mainpage + * + * Have a look at the Modules section for a function reference. + */ + +#include <stdlib.h> +#include <string.h> +#include <stdarg.h> + +#include "flash.h" +#include "programmer.h" +#include "layout.h" +#include "libflashrom.h" + +/** + * @defgroup fl-general General + * @{ + */ + +/** Pointer to log callback function. */ +static fl_log_callback_t *fl_log_callback = NULL; + +/** + * @brief Initialize libflashrom. + * + * @param perform_selfcheck If not zero, perform a self check. + * @return 0 on success + */ +int fl_init(const int perform_selfcheck) +{ + if (perform_selfcheck && selfcheck()) + return 1; + myusec_calibrate_delay(); + return 0; +} + +/** + * @brief Shut down libflashrom. + * @return 0 on success + */ +int fl_shutdown(void) +{ + return 0; /* TODO: nothing to do? */ +} + +/* TODO: fl_set_loglevel()? do we need it? + For now, let the user decide in his callback. */ + +/** + * @brief Set the log callback function. + * + * Set a callback function which will be invoked whenever libflashrom wants + * to output messages. This allows frontends to do whatever they see fit with + * such messages, e.g. write them to syslog, or to file, or print them in a + * GUI window, etc. + * + * @param log_callback Pointer to the new log callback function. + */ +void fl_set_log_callback(fl_log_callback_t *const log_callback) +{ + fl_log_callback = log_callback; +} +/** @private */ +int print(const enum msglevel level, const char *const fmt, ...) +{ + if (fl_log_callback) { + int ret; + va_list args; + va_start(args, fmt); + ret = fl_log_callback(level, fmt, args); + va_end(args); + return ret; + } + return 0; +} + +/** @} */ /* end fl-general */ + + + +/** + * @defgroup fl-query Querying + * @{ + */ + +/* TBD */ + +/** @} */ /* end fl-query */ + + + +/** + * @defgroup fl-prog Programmers + * @{ + */ + +/** + * @brief Initialize the specified programmer. + * + * @param prog_name Name of the programmer to initialize. + * @param prog_param Pointer to programmer specific parameters. + * @return 0 on success + */ +int fl_programmer_init(const char *const prog_name, const char *const prog_param) +{ + unsigned prog; + + for (prog = 0; prog < PROGRAMMER_INVALID; prog++) { + if (strcmp(prog_name, programmer_table[prog].name) == 0) + break; + } + if (prog >= PROGRAMMER_INVALID) { + msg_ginfo("Error: Unknown programmer \"%s\". Valid choices are:\n", prog_name); + list_programmers_linebreak(0, 80, 0); + return 1; + } + return programmer_init(prog, prog_param); +} + +/** + * @brief Shut down the initialized programmer. + * + * @return 0 on success + */ +int fl_programmer_shutdown(void) +{ + return programmer_shutdown(); +} + +/* TODO: fl_programmer_capabilities()? */ + +/** @} */ /* end fl-prog */ + + + +/** + * @defgroup fl-flash Flash chips + * @{ + */ + +/** + * @brief Probe for a flash chip. + * + * Probes for a flash chip and returns a flash context, that can be used + * later with flash chip and @ref fl-ops "image operations", if exactly one + * matching chip is found. + * + * @param[out] flashctx Points to a pointer of type fl_flashctx_t that will + * be set if exactly one chip is found. *flashctx has + * to be freed by the caller with @ref fl_flash_release. + * @param[in] chip_name Name of a chip to probe for, or NULL to probe for + * all known chips. + * @return 0 on success, + * 3 if multiple chips were found, + * 2 if no chip was found, + * or 1 on any other error. + */ +int fl_flash_probe(struct flashctx **const flashctx, const char *const chip_name) +{ + int i, ret = 2; + struct flashctx second_flashctx = { 0, }; + + chip_to_probe = chip_name; /* chip_to_probe is global in flashrom.c */ + + *flashctx = malloc(sizeof(**flashctx)); + if (!*flashctx) + return 1; + memset(*flashctx, 0, sizeof(**flashctx)); + + for (i = 0; i < registered_master_count; ++i) { + int flash_idx = -1; + if (!ret || (flash_idx = probe_flash(&registered_masters[i], 0, *flashctx, 0)) != -1) { + ret = 0; + /* We found one chip, now check that there is no second match. */ + if (probe_flash(&registered_masters[i], flash_idx + 1, &second_flashctx, 0) != -1) { + ret = 3; + break; + } + } + } + if (ret) { + free(*flashctx); + *flashctx = NULL; + } + return ret; +} + +/** + * @brief Returns the size of the specified flash chip in bytes. + * + * @param flashctx The queried flash context. + * @return Size of flash chip in bytes. + */ +size_t fl_flash_getsize(const struct flashctx *const flashctx) +{ + return flashctx->chip->total_size << 10; +} + +/** + * @brief Free a flash context. + * + * @param flashctx Flash context to free. + */ +void fl_flash_release(struct flashctx *const flashctx) +{ + free(flashctx); +} + +/** + * @brief Set a flag in the given flash context. + * + * @param flashctx Flash context to alter. + * @param flag Flag that is to be set / cleared. + * @param value Value to set. + */ +void fl_flag_set(fl_flashctx_t *const flashctx, const enum fl_flag flag, const bool value) +{ + switch (flag) { + case FL_FLAG_FORCE: flashctx->flags.force = value; break; + case FL_FLAG_FORCE_BOARDMISMATCH: flashctx->flags.force_boardmismatch = value; break; + case FL_FLAG_VERIFY_AFTER_WRITE: flashctx->flags.verify_after_write = value; break; + case FL_FLAG_VERIFY_WHOLE_CHIP: flashctx->flags.verify_whole_chip = value; break; + } +} + +/** + * @brief Return the current value of a flag in the given flash context. + * + * @param flashctx Flash context to read from. + * @param flag Flag to be read. + * @return Current value of the flag. + */ +bool fl_flag_get(const fl_flashctx_t *const flashctx, const enum fl_flag flag) +{ + switch (flag) { + case FL_FLAG_FORCE: return flashctx->flags.force; + case FL_FLAG_FORCE_BOARDMISMATCH: return flashctx->flags.force_boardmismatch; + case FL_FLAG_VERIFY_AFTER_WRITE: return flashctx->flags.verify_after_write; + case FL_FLAG_VERIFY_WHOLE_CHIP: return flashctx->flags.verify_whole_chip; + default: return false; + } +} + +/** @} */ /* end fl-flash */ + + + +/** + * @defgroup fl-layout Layout handling + * @{ + */ + +/** + * @brief Mark given region as included. + * + * @param layout The layout to alter. + * @param name The name of the region to include. + * + * @return 0 on success, + * 1 if the given name can't be found. + */ +int fl_layout_include_region(fl_layout_t *const layout, const char *name) +{ + size_t i; + for (i = 0; i < layout->num_entries; ++i) { + if (!strcmp(layout->entries[i].name, name)) { + layout->entries[i].included = true; + return 0; + } + } + return 1; +} + +/** + * @brief Free a layout. + * + * @param layout Layout to free. + */ +void fl_layout_release(struct fl_layout *const layout) +{ + free(layout); +} + +/** + * @brief Set the active layout for a flash context. + * + * Note: This just sets a pointer. The caller must not release the layout + * as long as he uses it through the given flash context. + * + * @param flashctx Flash context whose layout will be set. + * @param layout Layout to bet set. + */ +void fl_layout_set(struct flashctx *const flashctx, const struct fl_layout *const layout) +{ + flashctx->layout = layout; +} + +/** @} */ /* end fl-layout */ diff --git a/libflashrom.h b/libflashrom.h new file mode 100644 index 0000000..af56bc8 --- /dev/null +++ b/libflashrom.h @@ -0,0 +1,70 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2012 secunet Security Networks AG + * (Written by Nico Huber <nico.huber(a)secunet.com> for secunet) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __LIBFLASHROM_H__ +#define __LIBFLASHROM_H__ 1 + +#include <stdarg.h> + +int fl_init(int perform_selfcheck); +int fl_shutdown(void); +/** @ingroup fl-general */ +enum fl_log_level { /* This has to match enum msglevel. */ + FL_MSG_ERROR = 0, + FL_MSG_INFO = 1, + FL_MSG_DEBUG = 2, + FL_MSG_DEBUG2 = 3, + FL_MSG_SPEW = 4, +}; +/** @ingroup fl-general */ +typedef int(fl_log_callback_t)(enum fl_log_level, const char *format, va_list); +void fl_set_log_callback(fl_log_callback_t *); + +int fl_programmer_init(const char *prog_name, const char *prog_params); +int fl_programmer_shutdown(void); + +struct flashctx; +typedef struct flashctx fl_flashctx_t; +int fl_flash_probe(fl_flashctx_t **, const char *chip_name); +size_t fl_flash_getsize(const fl_flashctx_t *); +int fl_flash_erase(fl_flashctx_t *); +void fl_flash_release(fl_flashctx_t *); + +enum fl_flag { + FL_FLAG_FORCE, + FL_FLAG_FORCE_BOARDMISMATCH, + FL_FLAG_VERIFY_AFTER_WRITE, + FL_FLAG_VERIFY_WHOLE_CHIP, +}; +void fl_flag_set(fl_flashctx_t *, enum fl_flag, bool value); +bool fl_flag_get(const fl_flashctx_t *, enum fl_flag); + +int fl_image_read(fl_flashctx_t *, void *buffer, size_t buffer_len); +int fl_image_write(fl_flashctx_t *, const void *buffer, size_t buffer_len); +int fl_image_verify(fl_flashctx_t *, const void *buffer, size_t buffer_len); + +struct fl_layout; +typedef struct fl_layout fl_layout_t; +int fl_layout_include_region(fl_layout_t *, const char *name); +void fl_layout_release(fl_layout_t *); +void fl_layout_set(fl_flashctx_t *, const fl_layout_t *); + +#endif /* !__LIBFLASHROM_H__ */ -- To view, visit https://review.coreboot.org/19190 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: Ibd25aa58c165119a9f31ee9e9285bd793693d884 Gerrit-PatchSet: 1 Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de>

1 0

Change in flashrom[staging]: Add Doxyfile for libflashrom documentation
by David Hendricks (Code Review) April 7, 2017

April 7, 2017

Hello Nico Huber, I'd like you to do a code review. Please visit https://review.coreboot.org/19191 to review the following change. Change subject: Add Doxyfile for libflashrom documentation ...................................................................... Add Doxyfile for libflashrom documentation Reference documentation for libflashrom can be build with doxygen. With doxygen Doxyfile documentation will be put into a libflashrom-doc/ subdirectory. Change-Id: I38052378ab417727323ff36009304108b347c2b7 Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- A Doxyfile 1 file changed, 1,781 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/91/19191/1 diff --git a/Doxyfile b/Doxyfile new file mode 100644 index 0000000..6ac9bf3 --- /dev/null +++ b/Doxyfile @@ -0,0 +1,1781 @@ +# Doxyfile 1.7.6.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" "). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or sequence of words) that should +# identify the project. Note that if you do not use Doxywizard you need +# to put quotes around the project name if it contains spaces. + +PROJECT_NAME = "libflashrom" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer +# a quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify an logo or icon that is +# included in the documentation. The maximum height of the logo should not +# exceed 55 pixels and the maximum width should not exceed 200 pixels. +# Doxygen will copy the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = "libflashrom-doc" + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful if your file system +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding +# "class=itcl::class" will allow you to use the command class in the +# itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this +# tag. The format is ext=language, where ext is a file extension, and language +# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, +# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make +# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C +# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions +# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also makes the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and +# unions are shown inside the group in which they are included (e.g. using +# @ingroup) instead of on a separate page (for HTML and Man pages) or +# section (for LaTeX and RTF). + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and +# unions with only public data fields will be shown inline in the documentation +# of the scope in which they are defined (i.e. file, namespace, or group +# documentation), provided this scope is documented. If set to NO (the default), +# structs, classes, and unions are shown on a separate page (for HTML and Man +# pages) or section (for LaTeX and RTF). + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penalty. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will roughly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols. + +SYMBOL_CACHE_SIZE = 0 + +# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be +# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given +# their name and scope. Since this can be an expensive process and often the +# same symbol appear multiple times in the code, doxygen keeps a cache of +# pre-resolved symbols. If the cache is too small doxygen will become slower. +# If the cache is too large, memory is wasted. The cache size is given by this +# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespaces are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation +# rather than with sharp brackets. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen +# will sort the (brief and detailed) documentation of class members so that +# constructors and destructors are listed first. If set to NO (the default) +# the constructors will appear in the respective orders defined by +# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. +# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO +# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to +# do proper type resolution of all parameters of a function it will reject a +# match between the prototype and the implementation of a member function even +# if there is only one candidate or it is obvious which candidate to choose +# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen +# will still accept a match between prototype and implementation in such cases. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or macro consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and macros in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. +# This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command <command> <input-file>, where <command> is the value of +# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. The create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. +# You can optionally specify a file name after the option, if omitted +# DoxygenLayout.xml will be used as the name of the layout file. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files +# containing the references data. This must be a list of .bib files. The +# .bib extension is automatically appended if omitted. Using this command +# requires the bibtex tool to be installed. See also +# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style +# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this +# feature you need bibtex and perl available in the search path. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# The WARN_NO_PARAMDOC option can be enabled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = libflashrom.c libflashrom.h + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh +# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py +# *.f90 *.f *.for *.vhd *.vhdl + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command <filter> <input-file>, where <filter> +# is the value of the INPUT_FILTER tag, and <input-file> is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. +# If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. +# Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. +# The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty or if +# non of the patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) +# and it is also possible to disable source filtering for a specific pattern +# using *.ext= (so without naming a filter). This option only has effect when +# FILTER_SOURCE_FILES is enabled. + +FILTER_SOURCE_PATTERNS = + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. +# Otherwise they will link to the documentation. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html) You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = YES + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. Note that when using a custom header you are responsible +# for the proper inclusion of any scripts and style sheets that doxygen +# needs, which is dependent on the configuration options used. +# It is advised to generate a default header using "doxygen -w html +# header.html footer.html stylesheet.css YourConfigFile" and then modify +# that header. Note that the header is subject to change so you typically +# have to redo this when upgrading to a newer version of doxygen or when +# changing the value of configuration settings such as GENERATE_TREEVIEW! + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# style sheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that +# the files will be copied as-is; there are no commands or markers available. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. +# Doxygen will adjust the colors in the style sheet and background images +# according to this color. Hue is specified as an angle on a colorwheel, +# see http://en.wikipedia.org/wiki/Hue for more information. +# For instance the value 0 represents red, 60 is yellow, 120 is green, +# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. +# The allowed range is 0 to 359. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of +# the colors in the HTML output. For a value of 0 the output will use +# grayscales only. A value of 255 will produce the most vivid colors. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to +# the luminance component of the colors in the HTML output. Values below +# 100 gradually make the output lighter, whereas values above 100 make +# the output darker. The value divided by 100 is the actual gamma applied, +# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, +# and 100 does not change the gamma. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting +# this to NO can help when comparing the output of multiple runs. + +HTML_TIMESTAMP = YES + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = NO + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated +# that can be used as input for Qt's qhelpgenerator to generate a +# Qt Compressed Help (.qch) of the generated HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to +# add. For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see +# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> +# Qt Help Project / Custom Filters</a>. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's +# filter section matches. +# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> +# Qt Help Project / Filter Attributes</a>. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before +# the help appears. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have +# this name. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) +# at top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. Since the tabs have the same information as the +# navigation tree you can set this option to NO if you already set +# GENERATE_TREEVIEW to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. +# Since the tree basically has the same information as the tab index you +# could consider to set DISABLE_INDEX to NO when enabling this option. + +GENERATE_TREEVIEW = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values +# (range [0,1..20]) that doxygen will group on one line in the generated HTML +# documentation. Note that a value of 0 will completely suppress the enum +# values from appearing in the overview section. + +ENUM_VALUES_PER_LINE = 4 + +# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, +# and Class Hierarchy pages using a tree view instead of an ordered list. + +USE_INLINE_TREES = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open +# links to external symbols imported via tag files in a separate window. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are +# not supported properly for IE 6.0, but are supported on all modern browsers. +# Note that when changing this option you need to delete any form_*.png files +# in the HTML output before the changes have effect. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax +# (see http://www.mathjax.org) which uses client side Javascript for the +# rendering instead of using prerendered bitmaps. Use this if you do not +# have LaTeX installed or if you want to formulas look prettier in the HTML +# output. When enabled you also need to install MathJax separately and +# configure the path to it using the MATHJAX_RELPATH option. + +USE_MATHJAX = NO + +# When MathJax is enabled you need to specify the location relative to the +# HTML output directory using the MATHJAX_RELPATH option. The destination +# directory should contain the MathJax.js script. For instance, if the mathjax +# directory is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the +# mathjax.org site, so you can quickly see the result without installing +# MathJax, but it is strongly recommended to install a local copy of MathJax +# before deployment. + +MATHJAX_RELPATH = http://www.mathjax.org/mathjax + +# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension +# names that should be enabled during MathJax rendering. + +MATHJAX_EXTENSIONS = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box +# for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using +# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets +# (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine +# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. + +SEARCHENGINE = YES + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a PHP enabled web server instead of at the web client +# using Javascript. Doxygen will generate the search PHP script and index +# file to put on the web server. The advantage of the server +# based approach is that it scales better to large projects and allows +# full text search. The disadvantages are that it is more difficult to setup +# and does not have live searching capabilities. + +SERVER_BASED_SEARCH = NO + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = YES + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the +# Makefile that is written to the output directory. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4 + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for +# the generated latex document. The footer should contain everything after +# the last chapter. If it is left blank doxygen will generate a +# standard footer. Notice: only use this tag if you know what you are doing! + +LATEX_FOOTER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include +# source code with syntax highlighting in the LaTeX output. +# Note that which sources are shown also depends on other settings +# such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See +# http://en.wikipedia.org/wiki/BibTeX for more info. + +LATEX_BIB_STYLE = plain + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load style sheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. +# This is useful +# if you want to understand what is going on. +# On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# pointed to by INCLUDE_PATH will be searched when a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition that +# overrules the definition found in the source code. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all references to function-like macros +# that are alone on a line, have an all uppercase name, and do not end with a +# semicolon, because these will confuse the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option also works with HAVE_DOT disabled, but it is recommended to +# install and use dot, since it yields more powerful graphs. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is +# allowed to run in parallel. When set to 0 (the default) doxygen will +# base this on the number of processors available in the system. You can set it +# explicitly to a value larger than 0 to get control over the balance +# between CPU load and processing speed. + +DOT_NUM_THREADS = 0 + +# By default doxygen will use the Helvetica font for all dot files that +# doxygen generates. When you want a differently looking font you can specify +# the font name using DOT_FONTNAME. You need to make sure dot is able to find +# the font, which can be done by putting it in a standard location or by setting +# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. + +DOT_FONTNAME = Helvetica + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the Helvetica font. +# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to +# set the path where dot can find it. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will generate a graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are svg, png, jpg, or gif. +# If left blank png will be used. If you choose svg you need to set +# HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible in IE 9+ (other browsers do not have this requirement). + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# Note that this requires a modern browser other than Internet Explorer. +# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you +# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible. Older versions of IE do not have SVG support. + +INTERACTIVE_SVG = NO + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the +# \mscfile command). + +MSCFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = YES + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES -- To view, visit https://review.coreboot.org/19191 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I38052378ab417727323ff36009304108b347c2b7 Gerrit-PatchSet: 1 Gerrit-Project: flashrom Gerrit-Branch: staging Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de>

1 0