Re: FAILED: jacuzzi

[Jack Rosenthal]

This is probably a better topic for [e-mail].

But try writing the flash using your SuzyQable:

flashrom -p raiden_debug_spi:target=AP -w image.bin

On Thu, Apr 27, 2023 at 4:51 PM Jason Lockman  wrote:
> Hello,
>
> I have a chromebook model 11" HP MK G9 EE that is bootlooping and landing
> in recovery. When I press TAB on the recovery screen I get "ec software
> sync unable to get ec image hash" as the reason for recovery. A regular
> Chrome OS USB restore doesn't work so I attempted to install the factory
> shim but got an error. It occurs after writing the flash chip and during
> verify, and says
>
> Erasing and writing flash chip..
> Erasing and writing flash chip... Verifying flash... VERIFY FAILED at
> 0x00031087! Expected=0x93, Read=0x83, failed byte count from 0x000
> 00000-0x0003ffff: 0x1
> Your flash chip is in an unknown state.
> Get help on IRC at irc, freenode, net (channel #flashrom) or mail
> [e-mail] with FAILED: your board name in the subject line!
>
> Is there anything I can do to get this working? I made a Suzyqable and can
> connect to the board over USB C from linux but but don't quite understand
> what to do from there. Also I am unsure if this is a hardware failure of
> the flash chip and how to test for that. I have attached a screenshot with
> the above error for reference. Please let me know if you need any more info.
>
> Thank you!

FAILED: jacuzzi

[R S]

Or Matt/MrChromebox. He should be lurking here, too.

On Thu, Apr 27, 2023 at 7:50 PM Jack Rosenthal 
wrote:
> This is probably a better topic for [e-mail].
>
> But try writing the flash using your SuzyQable:
>
> flashrom -p raiden_debug_spi:target=AP -w image.bin
>
> On Thu, Apr 27, 2023 at 4:51 PM Jason Lockman 
> wrote:
> > Hello,
> >
> > I have a chromebook model 11" HP MK G9 EE that is bootlooping and landing
> > in recovery. When I press TAB on the recovery screen I get "ec software
> > sync unable to get ec image hash" as the reason for recovery. A regular
> > Chrome OS USB restore doesn't work so I attempted to install the factory
> > shim but got an error. It occurs after writing the flash chip and during
> > verify, and says
> >
> > Erasing and writing flash chip..
> > Erasing and writing flash chip... Verifying flash... VERIFY FAILED at
> > 0x00031087! Expected=0x93, Read=0x83, failed byte count from 0x000
> > 00000-0x0003ffff: 0x1
> > Your flash chip is in an unknown state.
> > Get help on IRC at irc, freenode, net (channel #flashrom) or mail
> > [e-mail] with FAILED: your board name in the subject line!
> >
> > Is there anything I can do to get this working? I made a Suzyqable and
> > can connect to the board over USB C from linux but but don't quite
> > understand what to do from there. Also I am unsure if this is a hardware
> > failure of the flash chip and how to test for that. I have attached a
> > screenshot with the above error for reference. Please let me know if you
> > need any more info.
> >
> > Thank you!
>
> flashrom mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]