On Sun, Jan 3, 2016 at 9:44 PM, Andrey Korolyov email@example.com wrote:
please post complete logs of a working and non-working probe as well as the exact flashrom version you are using. The output of lspci -nnv might become handy as well.
even giving out a fact that I am very lucky to hit very twisted issues at all, this time it looks like chip eventually stopped to respond via an appropriate interface (slight voltage change? bit-flip during a board initialization? lack of a probe delay? ), so I think that the initial report could be incorrect, as the flash is not responding anymore even where is was supposed to. Nevertheless, the appropriate log and lspci output are attached, please take a look on them if they could be helpful.
Got an another sample of the same board, because original was died from overheating during EEPROM resoldering procedure. Internal WRITE effectively bricked a board over cold reboot but I finally obtained logs with some possible usefulness. Should I check same random behavior as I reported previously after reflashing the chip externally? Unfortunate to me, the board layout strictly requires chip desoldering before I would be able to program it with anything, in-place attempts are failing even with external power source, but when de-soldered, chip flashes just perfectly via Minipro.