flashrom v0.9.7-r1711 on NetBSD 7.0 (i386)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.3.0, GCC 4.8.4, little endian
Command line (7 args): flashrom -p internal:laptop=this_is_not_a_laptop -c W39V040FB -r bios.bin -V
Calibrating delay loop... OS timer resolution is 5 usecs, 166M loops per second, 10 myus = 14 us, 100 myus = 105 us, 1000 myus = 1004 us, 10000 myus = 10042 us, 20 myus = 24 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: ""
DMI string system-product-name: ""
DMI string system-version: ""
DMI string baseboard-manufacturer: ""
DMI string baseboard-product-name: ""
DMI string baseboard-version: ""
DMI string chassis-type: ""
DMI chassis-type is not specific enough.
Found Winbond Super I/O, id 0x52
========================================================================
WARNING! You may be running flashrom on an unsupported laptop. We could
not detect this for sure because your vendor has not setup the SMBIOS
tables correctly. You can enforce execution by adding
'-p internal:laptop=this_is_not_a_laptop' to the command line, but
please read the following warning if you are not sure.

Laptops, notebooks and netbooks are difficult to support and we
recommend to use the vendor flashing utility. The embedded controller
(EC) in these machines often interacts badly with flashing.
See the manpage and http://www.flashrom.org/Laptops for details.

If flash is shared with the EC, erase is guaranteed to brick your laptop
and write may brick your laptop.
Read and probe may irritate your EC and cause fan failure, backlight
failure and sudden poweroff.
You have been warned.
========================================================================
Proceeding anyway because user forced us to.
Found chipset "AMD CS5536" with PCI ID 1022:2080. Enabling flash write... No MSR support for your OS yet.
FAILED!
Warning: unexpected second chipset match: "AMD CS5536"
ignoring, please report lspci and board URL to flashrom@flashrom.org
with 'CHIPSET: your board name' in the subject line.
The following protocols are supported: Non-SPI.
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040FB" (512 kB, FWH) at physical address 0xfff80000.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Lock status of block at 0x00000000 is Full Access.
Lock status of block at 0x00010000 is Full Access.
Lock status of block at 0x00020000 is Full Access.
Lock status of block at 0x00030000 is Full Access.
Lock status of block at 0x00040000 is Full Access.
Lock status of block at 0x00050000 is Full Access.
Lock status of block at 0x00060000 is Full Access.
Lock status of block at 0x00070000 is Full Access.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Reading flash... done.