Re: [flashrom] Can't identify SPI chip with buspirate_spi programmer

[Donald Dade]

Hi again,

Something else which just occurred to me:

I used flashrom on the Chromebook itself to program this very same
chip in the first place, without the -p option, which I assume
defaults to the internal programmer. It worked perfectly. Now that I
bricked it somehow, I tried to restore the BIOS image using flashrom
and the bus pirate as the programmer. This is the failure whose log I
sent you previously.

Any idea why the internal programmer works, but the bus pirate
programmer can't recognize the chip?

Thanks,

Donald


On Thu, Jan 14, 2016 at 10:47 PM, Donald Dade <[e-mail]> wrote:
> Hi,
>
> I bricked my Chromebook and am trying to recover it.
>
> I'm using:
>
> Ubuntu 15.10
> Bus Pirate v3.6 with firmware v6.2
> flashrom 0.9.8 r1914
>
> to try to read a:
>
> Windbond 25Q64FV on a Toshiba Chromebook 2 2015 (battery disconnected)
>
> by doing:
>
> sudo ./flashrom-0.9.8-r1914 -p buspirate_spi:dev=/dev/ttyUSB0 -r
> spi.bin -VVV -o log.txt
>
> but no operations are supported because the chip is not recognized.
> Can you provide any advice on how to move forward?
>
> Thank you,
>
> Donald