Re: [flashrom] [PATCH] Add ICH9 Engineering sample to chipset enables

[Carl-Daniel Hailfinger]

forwarding to list...

-------- Original Message --------
Subject: 	RE: [flashrom] [PATCH] Add ICH9 Engineering sample to chipset
enables
Date: 	Fri, 21 Aug 2009 18:41:36 +0200
From: 	LE COQ ANNYVONNE 
To: 	Carl-Daniel Hailfinger 
References:

Acked-by: Anne Le Coq

Hi Carl-Daniel,

It's the modification I've done to accept the ICH9, and it works fine. I just mention "ICH9" instead of "ICH9 Engineering Sample", but I don't think it's very important.

My problem now is that the opcode 06 is unknown in the opcode table.
To continue my test, I replace one of unused opcode (0B9H) by 06 and it's better. But it's not a good solution...
Then, after that, I can only read, write and erase my flash till A000H.
I think it's because I use the ICH9 in descriptor mode.
I have the following fault: 
ERROR at 0x0000a000: Expected=0xff, Read=0x00
Have you got an idea about this issue ?
Thanks
Anne