forwarding to list...
-------- Original Message -------- Subject: RE: [flashrom] [PATCH] Add ICH9 Engineering sample to chipset enables Date: Fri, 21 Aug 2009 18:41:36 +0200 From: LE COQ ANNYVONNE Annyvonne.Le_Coq@alcatel-lucent.fr To: Carl-Daniel Hailfinger email@example.com References: 4A8EB02D.firstname.lastname@example.org
Acked-by: Anne Le Coq email@example.com
It's the modification I've done to accept the ICH9, and it works fine. I just mention "ICH9" instead of "ICH9 Engineering Sample", but I don't think it's very important.
My problem now is that the opcode 06 is unknown in the opcode table. To continue my test, I replace one of unused opcode (0B9H) by 06 and it's better. But it's not a good solution... Then, after that, I can only read, write and erase my flash till A000H. I think it's because I use the ICH9 in descriptor mode. I have the following fault: ERROR at 0x0000a000: Expected=0xff, Read=0x00 Have you got an idea about this issue ? Thanks Anne