Hello ! ERASE FAILED ASUS P5VD2-MX SE

[Rémi charest]

Hello it seems my motherboard isn't really supported... Can you add
support for my board please ?
I'm wiLling to help if i can (linux noob here).

Thanks !

I DID: flashrom -p internal -w P5V0701.ROM
ON :   flashrom v0.9.6.1-r1564 on Linux 3.7.10-1-ARCH (i686)

TERMINAL SAID:
Calibrating delay loop... OK.
Found chipset "VIA VT8237A". Enabling flash write... OK.
*Found SST flash chip "SST49LF040B" (512 kB, LPC) at physical address
0xfff80000.*
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... ERASE FAILED at 0x00014000!
Expected=0xff, Read=0x17, failed byte count from 0x00014000-0x00014fff:
0xfe7
ERASE FAILED!
Reading current flash chip contents... done. ERASE FAILED at 0x00010000!
Expected=0xff, Read=0x17, failed byte count from 0x00010000-0x0001ffff:
0xfee5
ERASE FAILED!
FAILED!
Uh oh. Erase/write failed. Checking if anything changed.
Good. It seems nothing was changed.
Writing to the flash chip apparently didn't do anything.
This means we have to add special support for your board, programmer or
flash chip.
Please report this on IRC at irc.freenode.net (channel #flashrom) or
mail [e-mail]!

MY MOTHERBOARD:
 ASUS P5VD2-MX SE
version: Rev 1.xx
BIOS American Megatrends Inc.
version: 0602
          date: 05/08/2007
          taille: 64KiB
          capacité: 448KiB

Fonctionnalités:
 isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd
int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard
int14serial int17printer int10video acpi usb ls120boot zipboot
biosbootspecification