Tighten up board id match table in preparation of upcoming matching
changes.
Some boards are deliberately broken so that we will receive reports
or can remove support later (for instance, for agami aruma, which,
probably is no longer available in the wild).
* Acorp 6A815EPD: make autodetectable.
* Agami Aruma: remove bogus subsystem ids. Due to lacking secondary
main id, this match will break soon.
* GIGABYTE GA-2761GXDK: Add secondary main id. Subsystem ids are not
possible as they are all copies of the main ids. Will still require
-m.
* GIGABYTE GA-M57SLI-S4: add full set of subsystem ids. Will keep
match name for coreboot name matching.
* GIGABYTE GA-M61P-S3: Add secondary main id. Remove name match.
Probably has good subsystem ids, but no info was found. So
deliberately broken match.
* GIGABYTE GA-MA790FX-DQ6: pointless name match.
* IBM x3455: add full ids, remove name match.
* Kontron 986LCD-M: remove full id match as it is bogus. Kontron is
an embedded vendor and does not bother with subsystem ids, so
make this board name match only.
* MSI MS-6590 (KT4 Ultra): remove name match.
* MSI MS-7135 (K8N Neo3): add full id set, keep name match for
coreboot.
* VIA EPIA-N/NL: remove name match.
* VIA PC3500G: remove name match.
Signed-off-by: Luc Verhaegen <libv(a)skynet.be>
---
board_enable.c | 55 +++++++++++++++++++++++++++----------------------------
1 files changed, 27 insertions(+), 28 deletions(-)
diff --git a/board_enable.c b/board_enable.c
index 96d764f..cfad812 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -385,10 +385,23 @@ static int board_asus_p5a(const char *name)
return 0;
}
+/*
+ * Set GPIO lines in the Broadcom HT-1000 southbridge.
+ *
+ * It's not a Super I/O but it uses the same index/data port method.
+ */
+static int board_hp_dl145_g3_enable(const char *name)
+{
+ /* GPIO 0 reg from PM regs */
+ /* Set GPIO 2 and 5 high, connected to flash WP# and TBL# pins. */
+ sio_mask(0xcd6, 0x44, 0x24, 0x24);
+
+ return 0;
+}
+
static int board_ibm_x3455(const char *name)
{
- /* Set GPIO lines in the Broadcom HT-1000 southbridge. */
- /* It's not a Super I/O but it uses the same index/data port method. */
+ /* raise gpio13 */
sio_mask(0xcd6, 0x45, 0x20, 0x20);
return 0;
@@ -476,17 +489,6 @@ static int nvidia_mcp_gpio31_raise(const char *name)
return nvidia_mcp_gpio_set(0x31, 0x01);
}
-static int board_hp_dl145_g3_enable(const char *name)
-{
- /* Set GPIO lines in the Broadcom HT-1000 southbridge. */
- /* GPIO 0 reg from PM regs */
- /* Set GPIO 2 and 5 high, connected to flash WP# and TBL# pins. */
- /* It's not a Super I/O but it uses the same index/data port method. */
- sio_mask(0xcd6, 0x44, 0x24, 0x24);
-
- return 0;
-}
-
/**
* Suited for EPoX EP-BX3, and maybe some other Intel 440BX based boards.
*/
@@ -1127,9 +1129,9 @@ static int board_asus_a7v600x(const char *name)
struct board_pciid_enable board_pciid_enables[] = {
/* first pci-id set [4], second pci-id set [4], coreboot id [2], vendor name board name flash enable */
{0x8086, 0x2926, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, "Abit", "IP35", intel_ich_gpio16_raise},
- {0x8086, 0x1130, 0, 0, 0x105a, 0x0d30, 0x105a, 0x4d33, "acorp", "6a815epd", "Acorp", "6A815EPD", board_acorp_6a815epd},
+ {0x105a, 0x0d30, 0x105a, 0x4d33, 0x8086, 0x1130, 0x8086, 0, NULL, NULL, "Acorp", "6A815EPD", board_acorp_6a815epd},
{0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, "ASRock", "P4i65GV", intel_ich_gpio23_raise},
- {0x1022, 0x746B, 0x1022, 0x36C0, 0, 0, 0, 0, "AGAMI", "ARUMA", "agami", "Aruma", w83627hf_gpio24_raise_2e},
+ {0x1022, 0x746B, 0, 0, 0, 0, 0, 0, "AGAMI", "ARUMA", "agami", "Aruma", w83627hf_gpio24_raise_2e},
{0x1106, 0x3177, 0x17F2, 0x3177, 0x1106, 0x3148, 0x17F2, 0x3148, NULL, NULL, "Albatron", "PM266A", w836xx_memw_enable_2e},
{0x1106, 0x3205, 0x1106, 0x3205, 0x10EC, 0x8139, 0xA0A0, 0x0477, NULL, NULL, "AOpen", "vKM400Am-S", board_aopen_vkm400},
{0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, "artecgroup", "dbe61", "Artec Group", "DBE61", board_artecgroup_dbe6x},
@@ -1148,28 +1150,25 @@ struct board_pciid_enable board_pciid_enables[] = {
{0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3059, 0x1695, 0x3005, NULL, NULL, "EPoX", "EP-8K5A2", w836xx_memw_enable_2e},
{0x10EC, 0x8139, 0x1695, 0x9001, 0x11C1, 0x5811, 0x1695, 0x9015, NULL, NULL, "EPoX", "EP-8RDA3+", nvidia_mcp_gpio31_raise},
{0x8086, 0x7110, 0, 0, 0x8086, 0x7190, 0, 0, "epox", "ep-bx3", "EPoX", "EP-BX3", board_epox_ep_bx3},
- {0x1039, 0x0761, 0, 0, 0, 0, 0, 0, "gigabyte", "2761gxdk", "GIGABYTE", "GA-2761GXDK", it87xx_probe_spi_flash},
+ {0x1039, 0x0761, 0, 0, 0x10EC, 0x8168, 0, 0, "gigabyte", "2761gxdk", "GIGABYTE", "GA-2761GXDK", it87xx_probe_spi_flash},
{0x1106, 0x3227, 0x1458, 0x5001, 0x10ec, 0x8139, 0x1458, 0xe000, NULL, NULL, "GIGABYTE", "GA-7VT600", it8705_rom_write_enable},
{0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, NULL, NULL, "GIGABYTE", "GA-K8N-SLI", nvidia_mcp_gpio21_raise},
- {0x10de, 0x0360, 0, 0, 0, 0, 0, 0, "gigabyte", "m57sli", "GIGABYTE", "GA-M57SLI-S4", it87xx_probe_spi_flash},
- {0x10de, 0x03e0, 0, 0, 0, 0, 0, 0, "gigabyte", "m61p", "GIGABYTE", "GA-M61P-S3", it87xx_probe_spi_flash},
+ {0x10DE, 0x0360, 0x1458, 0x0C11, 0x10DE, 0x0369, 0x1458, 0x5001, "gigabyte", "m57sli", "GIGABYTE", "GA-M57SLI-S4", it87xx_probe_spi_flash},
+ {0x10de, 0x03e0, 0, 0, 0x10DE, 0x03D0, 0, 0, NULL, NULL, "GIGABYTE", "GA-M61P-S3", it87xx_probe_spi_flash},
{0x1002, 0x4398, 0x1458, 0x5004, 0x1002, 0x4391, 0x1458, 0xb000, NULL, NULL, "GIGABYTE", "GA-MA78G-DS3H", it87xx_probe_spi_flash},
{0x1002, 0x4398, 0x1458, 0x5004, 0x1002, 0x4391, 0x1458, 0xb002, NULL, NULL, "GIGABYTE", "GA-MA78GM-S2H", it87xx_probe_spi_flash},
- /* SB600 LPC, RD790 North. Neither are specific to the GA-MA790FX-DQ6. The coreboot ID is here to be able to trigger the board enable more easily. */
- {0x1002, 0x438d, 0x1458, 0x5001, 0x1002, 0x5956, 0x1002, 0x5956, "gigabyte", "ma790fx-dq6", "GIGABYTE", "GA-MA790FX-DQ6", it87xx_probe_spi_flash},
+ {0x1002, 0x438d, 0x1458, 0x5001, 0x1002, 0x5956, 0x1002, 0x5956, NULL, NULL, "GIGABYTE", "GA-MA790FX-DQ6", it87xx_probe_spi_flash},
{0x1166, 0x0223, 0x103c, 0x320d, 0x102b, 0x0522, 0x103c, 0x31fa, "hp", "dl145_g3", "HP", "DL145 G3", board_hp_dl145_g3_enable},
- {0x1166, 0x0205, 0x1014, 0x0347, 0, 0, 0, 0, "ibm", "x3455", "IBM", "x3455", board_ibm_x3455},
+ {0x1166, 0x0205, 0x1014, 0x0347, 0x1002, 0x515E, 0x1014, 0x0325, NULL, NULL, "IBM", "x3455", board_ibm_x3455},
{0x1039, 0x5513, 0x8086, 0xd61f, 0x1039, 0x6330, 0x8086, 0xd61f, NULL, NULL, "Intel", "D201GLY", wbsio_check_for_spi},
{0x1022, 0x7468, 0, 0, 0, 0, 0, 0, "iwill", "dk8_htx", "IWILL", "DK8-HTX", w83627hf_gpio24_raise_2e},
- /* Note: There are >= 2 version of the Kontron 986LCD-M/mITX! */
- {0x8086, 0x27b8, 0, 0, 0, 0, 0, 0, "kontron", "986lcd-m", "Kontron", "986LCD-M", board_kontron_986lcd_m},
- {0x10ec, 0x8168, 0x10ec, 0x8168, 0x104c, 0x8023, 0x104c, 0x8019, "kontron", "986lcd-m", "Kontron", "986LCD-M", board_kontron_986lcd_m},
+ {0x8086, 0x27A0, 0, 0, 0x8086, 0x27b8, 0, 0, "kontron", "986lcd-m", "Kontron", "986LCD-M", board_kontron_986lcd_m},
{0x8086, 0x2411, 0x8086, 0x2411, 0x8086, 0x7125, 0x0e11, 0xb165, NULL, NULL, "Mitac", "6513WU", board_mitac_6513wu},
- {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, "msi", "kt4ultra", "MSI", "MS-6590 (KT4 Ultra)",board_msi_kt4v},
+ {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, NULL, NULL, "MSI", "MS-6590 (KT4 Ultra)",board_msi_kt4v},
{0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)",w83627thf_gpio4_4_raise_2e},
{0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, "MSI", "MS-6712 (KT4V)", board_msi_kt4v},
{0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, "MSI", "MS-7046", intel_ich_gpio19_raise},
- {0x10de, 0x005e, 0, 0, 0, 0, 0, 0, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", w83627thf_gpio4_4_raise_4e},
+ {0x10DE, 0x005E, 0x1462, 0x7135, 0x10DE, 0x0050, 0x1462, 0x7135, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", w83627thf_gpio4_4_raise_4e},
{0x1106, 0x3099, 0, 0, 0x1106, 0x3074, 0, 0, "shuttle", "ak31", "Shuttle", "AK31", w836xx_memw_enable_2e},
{0x1106, 0x3104, 0x1297, 0xa238, 0x1106, 0x3059, 0x1297, 0xc063, NULL, NULL, "Shuttle", "AK38N", it8705f_write_enable_2e},
{0x10DE, 0x0050, 0x1297, 0x5036, 0x1412, 0x1724, 0x1297, 0x5036, NULL, NULL, "Shuttle", "FN25", board_shuttle_fn25},
@@ -1177,9 +1176,9 @@ struct board_pciid_enable board_pciid_enables[] = {
{0x8086, 0x1076, 0x8086, 0x1176, 0x1106, 0x3059, 0x10f1, 0x2498, NULL, NULL, "Tyan", "S2498 (Tomcat K7M)", board_asus_a7v8x_mx},
{0x1106, 0x0314, 0x1106, 0xaa08, 0x1106, 0x3227, 0x1106, 0xAA08, NULL, NULL, "VIA", "EPIA-CN", board_via_epia_sp},
{0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, "VIA", "EPIA M/MII/...", board_via_epia_m},
- {0x1106, 0x0259, 0x1106, 0x3227, 0x1106, 0x3065, 0x1106, 0x3149, "via", "epia-n", "VIA", "EPIA-N/NL", board_via_epia_n}, /* TODO: remove coreboot ids */
+ {0x1106, 0x0259, 0x1106, 0x3227, 0x1106, 0x3065, 0x1106, 0x3149, NULL, NULL, "VIA", "EPIA-N/NL", board_via_epia_n},
{0x1106, 0x3227, 0x1106, 0xAA01, 0x1106, 0x0259, 0x1106, 0xAA01, NULL, NULL, "VIA", "EPIA SP", board_via_epia_sp},
- {0x1106, 0x5337, 0x1458, 0xb003, 0x1106, 0x287e, 0x1106, 0x337e, "via", "pc3500g", "VIA", "PC3500G", it87xx_probe_spi_flash},
+ {0x1106, 0x5337, 0x1458, 0xb003, 0x1106, 0x287e, 0x1106, 0x337e, NULL, NULL, "VIA", "PC3500G", it87xx_probe_spi_flash},
{ 0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL}, /* end marker */
};
--
1.6.0.2
--8P1HSweYDcXXzwPJ--
