flashrom

flashrom@flashrom.org

5 participants
9186 discussions

[PATCH] fix output for multiple found flash chips
by Stefan Tauner 24 Jun '11

24 Jun '11

- missing quotes - missing commas Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- cli_classic.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-) diff --git a/cli_classic.c b/cli_classic.c index 59096a0..aba6edf 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -373,9 +373,10 @@ int cli_classic(int argc, char *argv[]) } if (chipcount > 1) { - printf("Multiple flash chips were detected:"); - for (i = 0; i < chipcount; i++) - printf(" %s", flashes[i].name); + printf("Multiple flash chips were detected: \"%s\"", + flashes[0].name); + for (i = 1; i < chipcount; i++) + printf(", \"%s\"", flashes[i].name); printf("\nPlease specify which chip to use with the -c <chipname> option.\n"); programmer_shutdown(); exit(1); -- 1.7.1

1 0

Intel MBD question
by Ian Whitfield 24 Jun '11

24 Jun '11

Hi I have recently built a new Computer with an Intel DG41WV MBD. This has an 82G41 BIOS chip and a GMA X4500 video chip. My Operating System is Linux Mint 10 KDE. I have problems with the screen display not refreshing correctly leaving part of the old screen still showing. Forcing a refresh by moving the window off screen and back again cures this. Therefore I am wanting to update the BIOS to see if this will correct the problem. From recommendations on the Ubuntu Form it has been recommended that I use Flashrom to do this. However I can find no reference to either this Intel MBD or the Chipsets on your site. Can you please advise me on whether these are supported with Flashrom and if necessary recommend the correct method to do this. Thanks a lot. -- */_Ian Whitfield_/*/ *Pretoria, South Africa* *Tel* - +27 (0)12 817 2001 *Cell* - +27 (0)82 573 9142 *Fax* - +27 (0)86 651 4844 *Skype* - ianzs6cdx *SnailMail* - PO Box 72226, Lynnwood Ridge 0040 South Africa. /(No trees were harmed in the production of this message, however a large number of re-cycled electrons were temporarily inconvenienced) ////

3 8

[PATCH 3/3] add support for SFDP (JESD216)
by Stefan Tauner 24 Jun '11

24 Jun '11

Similar to ICH Hardware Sequencing this uses a generic struct flashchip element in flashrom.c with dummy values and a special probe function that fills the obtained values into that generic struct. Documentation used: http://www.jedec.org/standards-documents/docs/jesd216 (2011-04) W25Q32BV data sheet Revision F (2011-04-01) EN25QH16 data sheet Revision F (2011-06-01) Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- chipdrivers.h | 1 + flashchips.c | 24 +++++ flashchips.h | 1 + flashrom.c | 28 ++++++- spi.h | 5 + spi25.c | 273 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 331 insertions(+), 1 deletions(-) diff --git a/chipdrivers.h b/chipdrivers.h index 92ddbea..0a3df50 100644 --- a/chipdrivers.h +++ b/chipdrivers.h @@ -26,6 +26,7 @@ #define __CHIPDRIVERS_H__ 1 /* spi.c, should probably be in spi_chip.c */ +int probe_spi_sfdp(struct flashchip *flash); int probe_spi_rdid(struct flashchip *flash); int probe_spi_rdid4(struct flashchip *flash); int probe_spi_rems(struct flashchip *flash); diff --git a/flashchips.c b/flashchips.c index 865ba2f..6fbbd2c 100644 --- a/flashchips.c +++ b/flashchips.c @@ -8507,6 +8507,30 @@ const struct flashchip flashchips[] = { .write = write_jedec_1, .read = read_memmapped, }, + + { + .vendor = "Unknown", + .name = "SFDP device", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = GENERIC_MANUF_ID, + .model_id = SFDP_DEVICE_ID, + /* We present our own "report this" text hence we do not + * want the default "This flash part has status UNTESTED..." + * text to be printed. */ + .tested = TEST_OK_PREW, + .probe = probe_spi_sfdp, + .page_size = 256, + .write = spi_chip_write_256, + .read = spi_chip_read, + /* FIXME: some vendor extensions define this */ + .voltage = {}, + /* Everything below will be set by the probing function. */ + .total_size = 0, + .feature_bits = 0, + .block_erasers = {}, + .unlock = NULL, + .printlock = NULL, + }, { .vendor = "AMIC", diff --git a/flashchips.h b/flashchips.h index 3b2b94f..82333c8 100644 --- a/flashchips.h +++ b/flashchips.h @@ -36,6 +36,7 @@ #define GENERIC_MANUF_ID 0xffff /* Check if there is a vendor ID */ #define GENERIC_DEVICE_ID 0xffff /* Only match the vendor ID */ +#define SFDP_DEVICE_ID 0xfffe #define ALLIANCE_ID 0x52 /* Alliance Semiconductor */ #define ALLIANCE_AS29F002B 0x34 diff --git a/flashrom.c b/flashrom.c index aed10aa..56af373 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1206,7 +1206,33 @@ int probe_flash(int startchip, struct flashchip *fill_flash, int force) * probe_flash() is the first one and thus no chip has been * found before. */ - if (startchip == 0 || fill_flash->model_id != GENERIC_DEVICE_ID) + if (startchip == 0 && fill_flash->model_id == SFDP_DEVICE_ID) { + msg_cinfo("===\n" + "SFDP has autodetected a flash chip which is " + "not natively supported by flashrom yet.\n"); + if (!check_block_erasers(flash, 0)) + msg_cinfo("The standard operations read and " + "verify should work, but to support " + "erase, write and all other " + "possible features"); + else + msg_cinfo("All standard operations (read, " + "verify, erase and write) should " + "work, but to support all possible " + "features"); + + msg_cinfo(" we need to add them manually.\nYou " + "can help us by mailing us the output of " + "the following command to flashrom@flashrom." + "org: \n'flashrom -VV [plus the " + "-p/--programmer parameter (if needed)]" + "'\nThanks for your help!\n" + "===\n"); + } + + if (startchip == 0 || + ((fill_flash->model_id != GENERIC_DEVICE_ID) && + (fill_flash->model_id != SFDP_DEVICE_ID))) break; notfound: diff --git a/spi.h b/spi.h index b908603..5f07eae 100644 --- a/spi.h +++ b/spi.h @@ -40,6 +40,11 @@ #define JEDEC_REMS_OUTSIZE 0x04 #define JEDEC_REMS_INSIZE 0x02 +/* Read Serial Flash Discoverable Parameters (SFDP) */ +#define JEDEC_SFDP 0x5a +#define JEDEC_SFDP_OUTSIZE 0x05 /* 8b op, 24b addr, 8b dummy */ +/* JEDEC_SFDP_INSIZE : any length */ + /* Read Electronic Signature */ #define JEDEC_RES 0xab #define JEDEC_RES_OUTSIZE 0x04 diff --git a/spi25.c b/spi25.c index d3680fb..af81f19 100644 --- a/spi25.c +++ b/spi25.c @@ -23,6 +23,7 @@ */ #include <string.h> +#include <stdlib.h> #include "flash.h" #include "flashchips.h" #include "chipdrivers.h" @@ -113,6 +114,278 @@ int spi_write_disable(void) return spi_send_command(sizeof(cmd), 0, cmd, NULL); } +static int spi_sfdp(uint32_t address, uint8_t *buf, int len) +{ + const unsigned char cmd[JEDEC_SFDP_OUTSIZE] = { + JEDEC_SFDP, + (address >> 16) & 0xff, + (address >> 8) & 0xff, + (address >> 0) & 0xff, + 0 + }; + return spi_send_command(sizeof(cmd), len, cmd, buf); +} + +struct sfdp_tbl_hdr { + uint8_t id; + uint8_t v_minor; + uint8_t v_major; + uint8_t len; + uint32_t ptp; /* 24b pointer */ +}; + +struct sfdp_tbl_0 { + uint8_t id; + uint8_t v_minor; + uint8_t v_major; + uint8_t len; + uint32_t ptp; /* 24b pointer */ +}; + +static int sfdp_fill_flash(struct flashchip *f, uint8_t *buf, uint16_t len) +{ + uint32_t tmp32; + uint8_t tmp8; + uint32_t total_size; /* in bytes */ + uint32_t bsize; + int i, j; + + msg_cspew("Parsing JEDEC SFDP parameter table...\n"); + if (len == 9 * 4) { + msg_cerr("%s: len out of spec\n", __func__); + return 1; + } + + /* 1. double word */ + i = 0; + tmp32 = buf[(4 * i) + 0]; + tmp32 |= ((unsigned int)buf[(4 * i) + 1]) << 8; + tmp32 |= ((unsigned int)buf[(4 * i) + 2]) << 16; + tmp32 |= ((unsigned int)buf[(4 * i) + 3]) << 24; + + tmp8 = (tmp32 >> 17) & 0x3; + switch (tmp8) { + case 0x0: + msg_cspew(" 3-Byte only addressing.\n"); + break; + case 0x1: + msg_cspew(" 3-Byte (and optionally 4-Byte) addressing.\n"); + break; + case 0x2: + msg_cdbg(" 4-Byte only addressing not supported.\n"); + return 1; + default: + msg_cdbg(" Required addressing mode (0x%x) not supported.\n", + tmp8); + return 1; + } + + msg_cspew(" Writes to the status register have "); + if (tmp32 & (1 << 3)) { + f->unlock = spi_disable_blockprotect; + msg_cspew("to be enabled with "); + if (tmp32 & (1 << 4)) { + f->feature_bits = FEATURE_WRSR_WREN; + msg_cspew("WREN (0x06).\n"); + } else { + f->feature_bits = FEATURE_WRSR_EWSR; + msg_cspew("EWSR (0x50).\n"); + } + } else + msg_cspew("not to be especially enabled.\n"); + + /* 2. double word */ + i = 1; + tmp32 = buf[(4 * i) + 0]; + tmp32 |= ((unsigned int)buf[(4 * i) + 1]) << 8; + tmp32 |= ((unsigned int)buf[(4 * i) + 2]) << 16; + tmp32 |= ((unsigned int)buf[(4 * i) + 3]) << 24; + + if (tmp32 & (1<<31)) { + msg_cdbg(" Flash chip size >= 4 Gb/ 500 MB not supported.\n"); + return 1; + } + total_size = (tmp32 & 0x7FFFFFFF) / 8; + f->total_size = total_size / 1024; + msg_cspew(" Flash chip size is %d kB.\n", f->total_size); + + i = 8; + for(j = 0; j < 4; j++) { + /* 8 double words from the start + 2 words for every eraser */ + bsize = 2^(buf[(4 * i) + (2 * j)]); + if (bsize == 0) + continue; + + tmp32 = buf[(4 * i) + (2 * j) + 1]; + switch(tmp32){ + case 0x00: + case 0xff: + /* Not specified, assuming "not supported". */ + continue; + case 0x20: + f->block_erasers[j].block_erase = spi_block_erase_20; + break; + case 0x52: + f->block_erasers[j].block_erase = spi_block_erase_52; + break; + case 0x60: + f->block_erasers[j].block_erase = spi_block_erase_60; + break; + case 0xc7: + f->block_erasers[j].block_erase = spi_block_erase_c7; + break; + case 0xd7: + f->block_erasers[j].block_erase = spi_block_erase_d7; + break; + case 0xd8: + f->block_erasers[j].block_erase = spi_block_erase_d8; + break; + default: + msg_cinfo("%s: unknown opcode (0x%02x) in SFDP table. " + "Please report this at " + "flashrom(a)flashrom.org\n", + __func__, tmp32); + continue; + } + f->block_erasers[j].eraseblocks[0].size = bsize; + f->block_erasers[j].eraseblocks[0].count = total_size/bsize; + msg_cspew(" Block eraser %d: %d x %d B with opcode 0x%02x\n", + j, total_size/bsize, bsize, tmp32); + } + return 0; +} + +static int sfdp_fetch_pt(uint32_t addr, uint8_t *buf, uint16_t len) +{ + uint16_t i; + if (spi_sfdp(addr, buf, len)) { + msg_cerr("Receiving SFDP parameter table failed.\n"); + return 1; + } + msg_cspew(" Parameter table contents:\n"); + for(i = 0; i < len; i++) { + if ((i % 8) == 0) { + msg_cspew(" 0x%03x: ", i); + } + msg_cspew(" 0x%02x", buf[i]); + if ((i % 8) == 7) { + msg_cspew("\n"); + continue; + } + if ((i % 8) == 3) { + msg_cspew(" "); + continue; + } + } + msg_cspew("\n"); + return 0; +} + +int probe_spi_sfdp(struct flashchip *flash) +{ + int ret = 0; + uint8_t buf[8]; + uint16_t tmp16; + uint32_t tmp32; + uint8_t nph; + uint8_t i; + struct sfdp_tbl_hdr *hdrs; + uint8_t *hbuf; + uint8_t *tbuf; + + if (spi_sfdp(0x0, buf, 4)) { + msg_cerr("Receiving SFDP signature failed.\n"); + return 0; + } + tmp32 = buf[0]; + tmp32 |= ((unsigned int)buf[1]) << 8; + tmp32 |= ((unsigned int)buf[2]) << 16; + tmp32 |= ((unsigned int)buf[3]) << 24; + + msg_cspew("SFDP signature = 0x%08x (should be 0x50444653)\n", tmp32); + if (tmp32 != 0x50444653) { + msg_cdbg("No SFDP signature found.\n"); + return 0; + } + if (spi_sfdp(0x4, buf, 3)) { + msg_cerr("Receiving SFDP revision and number of parameter " + "headers (NPH) failed. "); + return 0; + } + msg_cspew("SFDP revision = %d.%d\n", buf[1], buf[0]); + nph = buf[3]; + msg_cspew("SFDP number of parameter headers (NPH) = %d (+ 1 mandatory)" + "\n", nph); + + /* Fetch all parameter headers, even if we don't use them all (yet). */ + hbuf = malloc(sizeof(struct sfdp_tbl_hdr) * (nph + 1)); + hdrs = malloc((nph + 1) * 8); + if (hbuf == NULL || hdrs == NULL ) { + msg_gerr("Out of memory!\n"); + exit(1); /* FIXME: shutdown gracefully */ + } + if (spi_sfdp(0x8, hbuf, (nph + 1) * 8)) { + msg_cerr("Receiving SFDP parameter table headers failed.\n"); + goto cleanup_hdrs; + } + + i = 0; + do{ + hdrs[i].id = hbuf[(8 * i) + 0]; + hdrs[i].v_minor = hbuf[(8 * i) + 1]; + hdrs[i].v_major = hbuf[(8 * i) + 2]; + hdrs[i].len = hbuf[(8 * i) + 3]; + hdrs[i].ptp = hbuf[(8 * i) + 4]; + hdrs[i].ptp |= ((unsigned int)hbuf[(8 * i) + 5]) << 8; + hdrs[i].ptp |= ((unsigned int)hbuf[(8 * i) + 6]) << 16; + msg_cspew("SFDP parameter table header %d:\n", i); + msg_cspew(" ID 0x%02x, version %d.%d\n", hdrs[i].id, + hdrs[i].v_major, hdrs[i].v_minor); + tmp16 = hdrs[i].len * 4; + tmp32 = hdrs[i].ptp; + msg_cspew(" Length %d B, Parameter Table Pointer 0x%06x\n", + tmp16, tmp32); + + tbuf = malloc(tmp16); + if (tbuf == NULL) { + msg_gerr("Out of memory!\n"); + exit(1); /* FIXME: shutdown gracefully */ + } + if (sfdp_fetch_pt(tmp32, tbuf, tmp16)){ + msg_cerr("Fetching SFDP parameter table %d failed.\n", + i); + free(tbuf); + break; + } + if (i == 0) { /* Mandatory JEDEC SFDP parameter table */ + if (hdrs[i].id != 0) + msg_cdbg("ID of the mandatory JEDEC SFDP " + "parameter table is not 0 as demanded " + "by JESD216 (warning only).\n"); + + if (hdrs[i].len != (9 * 4)) { + msg_cdbg("Length of the mandatory JEDEC SFDP " + "parameter table is not 24 B as " + "demanded by JESD216.\n"); + if (hdrs[i].len == (4 * 4)) + msg_cdbg("It seems like it is the " + "preliminary Intel version of " + "SFDP, which we don't support." + "\n"); + } else if (sfdp_fill_flash(flash, tbuf, tmp16) == 0) + ret = 1; + } + + free(tbuf); + i++; + } while(i <= nph); + +cleanup_hdrs: + free(hdrs); + free(hbuf); + return ret; +} + static int probe_spi_rdid_generic(struct flashchip *flash, int bytes) { unsigned char readarr[4]; -- 1.7.1

1 0

[PATCH 2/3] add check_block_erasers which returns the number of well-defined erasers for a chip
by Stefan Tauner 24 Jun '11

24 Jun '11

This can be used in various situations (including one in the upcoming SFDP patch) and removes one FIXME in current HEAD. Needed to move check_block_eraser (which checks a single eraser) up to avoid (upcoming) forward declaration(s). Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- flashrom.c | 70 ++++++++++++++++++++++++++++++++++------------------------- 1 files changed, 40 insertions(+), 30 deletions(-) diff --git a/flashrom.c b/flashrom.c index 6979d84..aed10aa 100644 --- a/flashrom.c +++ b/flashrom.c @@ -711,6 +711,43 @@ char *extract_programmer_param(char *param_name) return extract_param(&programmer_param, param_name, ","); } +static int check_block_eraser(const struct flashchip *flash, int k, int log) +{ + struct block_eraser eraser = flash->block_erasers[k]; + + if (!eraser.block_erase && !eraser.eraseblocks[0].count) { + if (log) + msg_cdbg("not defined. "); + return 1; + } + if (!eraser.block_erase && eraser.eraseblocks[0].count) { + if (log) + msg_cdbg("eraseblock layout is known, but matching " + "block erase function is not implemented. "); + return 1; + } + if (eraser.block_erase && !eraser.eraseblocks[0].count) { + if (log) + msg_cdbg("block erase function found, but " + "eraseblock layout is not defined. "); + return 1; + } + return 0; +} + +/* Returns the number of well-defined erasers for a chip. + * The log parameter controls output. */ +static int check_block_erasers(const struct flashchip *flash, int log) +{ + int usable_erasefunctions = 0; + int k; + for (k = 0; k < NUM_ERASEFUNCTIONS; k++) { + if (!check_block_eraser(flash, k, 0)) + usable_erasefunctions++; + } + return usable_erasefunctions; +} + /* start is an offset to the base address of the flash chip */ int check_erased_range(struct flashchip *flash, int start, int len) { @@ -1462,40 +1499,13 @@ static int walk_eraseregions(struct flashchip *flash, int erasefunction, return 0; } -static int check_block_eraser(struct flashchip *flash, int k, int log) -{ - struct block_eraser eraser = flash->block_erasers[k]; - - if (!eraser.block_erase && !eraser.eraseblocks[0].count) { - if (log) - msg_cdbg("not defined. "); - return 1; - } - if (!eraser.block_erase && eraser.eraseblocks[0].count) { - if (log) - msg_cdbg("eraseblock layout is known, but matching " - "block erase function is not implemented. "); - return 1; - } - if (eraser.block_erase && !eraser.eraseblocks[0].count) { - if (log) - msg_cdbg("block erase function found, but " - "eraseblock layout is not defined. "); - return 1; - } - return 0; -} - int erase_and_write_flash(struct flashchip *flash, uint8_t *oldcontents, uint8_t *newcontents) { int k, ret = 0; uint8_t *curcontents; unsigned long size = flash->total_size * 1024; - int usable_erasefunctions = 0; + int usable_erasefunctions = check_block_erasers(flash, 0); - for (k = 0; k < NUM_ERASEFUNCTIONS; k++) - if (!check_block_eraser(flash, k, 0)) - usable_erasefunctions++; msg_cinfo("Erasing and writing flash chip... "); if (!usable_erasefunctions) { msg_cerr("ERROR: flashrom has no erase function for this flash " @@ -1814,13 +1824,13 @@ int chip_safety_check(struct flashchip *flash, int force, int read_it, int write } if (erase_it || write_it) { /* Write needs erase. */ - if (flash->tested & TEST_BAD_ERASE) { + if (flash->tested & TEST_BAD_ERASE && + !check_block_erasers(flash, 0)) { msg_cerr("Erase is not working on this chip. "); if (!force) return 1; msg_cerr("Continuing anyway.\n"); } - /* FIXME: Check if at least one erase function exists. */ } if (write_it) { if (flash->tested & TEST_BAD_WRITE) { -- 1.7.1

1 0

[PATCH 1/3] fix probe_flash to report new values set by probing functions
by Stefan Tauner 24 Jun '11

24 Jun '11

This is needed if the probing function changes its fill_flash parameter like in the pattern used to support Intel Hardware Sequencing and SFDP. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- flashrom.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/flashrom.c b/flashrom.c index cfee1a1..6979d84 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1188,8 +1188,8 @@ notfound: msg_cinfo("%s chip \"%s %s\" (%d kB, %s) %s.\n", force ? "Assuming" : "Found", - flash->vendor, flash->name, flash->total_size, - flashbuses_to_text(flash->bustype), location); + fill_flash->vendor, fill_flash->name, fill_flash->total_size, + flashbuses_to_text(fill_flash->bustype), location); /* Flash registers will not be mapped if the chip was forced. Lock info * may be stored in registers, so avoid lock info printing. -- 1.7.1

1 0

[PATCH 0/3] support for SFDP
by Stefan Tauner 24 Jun '11

24 Jun '11

read more about it in my blog post: http://blogs.coreboot.org/blog/2011/06/24/gsoc-2011-flashrom-part-2-sfdp/ Stefan Tauner (3): fix probe_flash to report new values set by probing functions add check_block_erasers which returns the number of well-defined erasers for a chip add support for SFDP (JESD216) chipdrivers.h | 1 + flashchips.c | 24 +++++ flashchips.h | 1 + flashrom.c | 102 +++++++++++++++------- spi.h | 5 + spi25.c | 273 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 373 insertions(+), 33 deletions(-)

1 0

HP Viola-GL8E Pegatron ASUS M2N78-LA
by Zach Stuart 24 Jun '11

24 Jun '11

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01421635&cc=us&dlc=en&… specifications straight from HP. This board is an oem rebrand slight modification of an ASUS mobo (cannot find an exact asus mobo). linux-uphg:/usr/sbin # flashrom -V flashrom v0.9.3-r1246 on Linux 2.6.37.6-0.5-desktop (x86_64), built with libpci 3.1.7, GCC 4.5.1 20101208 [gcc-4_5-branch revision 167585], little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 548M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1042 us, 10000 myus = 10743 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard " DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: "PEGATRON CORPORATION" DMI string baseboard-product-name: "VIOLA" DMI string baseboard-version: "2.03" DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP78S", enabling flash write... chipset PCI ID is 10de:075c, This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Write is unsupported! Found SMBus device 10de:0752 at 00:01:1 MCP SPI BAR is at 0xfce80000 Mapping NVIDIA MCP6x SPI at 0xfce80000, unaligned size 0x544. SPI control is 0xc012, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: SPI. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BN/BX-B, 128 KB: skipped. Probing for Intel 28F001BN/BX-T, 128 KB: skipped. Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: skipped. Probing for Intel 28F008S3/S5/SC, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL004A, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF010.REMS, 128 KB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V040FB, 512 KB: skipped. Probing for Winbond W39V040FC, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xc2, id2 0x13 === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! No operations were specified. linux-uphg:/usr/sbin # flashrom -Vr /bios.rom flashrom v0.9.3-r1246 on Linux 2.6.37.6-0.5-desktop (x86_64), built with libpci 3.1.7, GCC 4.5.1 20101208 [gcc-4_5-branch revision 167585], little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 548M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1035 us, 10000 myus = 10064 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard " DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: "PEGATRON CORPORATION" DMI string baseboard-product-name: "VIOLA" DMI string baseboard-version: "2.03" DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP78S", enabling flash write... chipset PCI ID is 10de:075c, This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Write is unsupported! Found SMBus device 10de:0752 at 00:01:1 MCP SPI BAR is at 0xfce80000 Mapping NVIDIA MCP6x SPI at 0xfce80000, unaligned size 0x544. SPI control is 0xc012, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: SPI. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BN/BX-B, 128 KB: skipped. Probing for Intel 28F001BN/BX-T, 128 KB: skipped. Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: skipped. Probing for Intel 28F008S3/S5/SC, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL004A, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF010.REMS, 128 KB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V040FB, 512 KB: skipped. Probing for Winbond W39V040FC, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xc2, id2 0x13 === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... done. linux-uphg:/usr/sbin # dmidecode # dmidecode 2.11 SMBIOS 2.5 present. 46 structures occupying 4064 bytes. Table at 0x0009EC00. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: 5.29 Release Date: 04/28/2009 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 1024 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 8.15 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Hewlett-Packard Product Name: Version: Serial Number: UUID: 00020003-0004-0005-0006-000700080009 Wake-up Type: Power Switch SKU Number: Family: Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: PEGATRON CORPORATION Product Name: VIOLA Version: 2.03 Serial Number: X312345678 Asset Tag: Features: Board is a hosting board Board is replaceable Location In Chassis: Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 21 bytes Chassis Information Manufacturer: Hewlett-Packard Type: Desktop Lock: Not Present Version: Chassis Version Serial Number: Chassis Serial Number Asset Tag: Asset-1234567890 Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 Handle 0x0004, DMI type 4, 40 bytes Processor Information Socket Designation: CPU 1 Type: Central Processor Family: Phenom X4 Manufacturer: AMD ID: 23 0F 10 00 FF FB 8B 17 Signature: Family 16, Model 2, Stepping 3 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) HTT (Multi-threading) Version: AMD Phenom(tm) 9550 Quad-Core Processor Voltage: 1.5 V External Clock: 200 MHz Max Speed: 2200 MHz Current Speed: 2200 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: 0x0007 Serial Number: Asset Tag: Part Number: Core Count: 4 Core Enabled: 4 Characteristics: 64-bit capable Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: L1-Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Varies With Memory Address Location: Internal Installed Size: 512 kB Maximum Size: 512 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 4-way Set-associative Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2-Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Varies With Memory Address Location: Internal Installed Size: 2048 kB Maximum Size: 2048 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 4-way Set-associative Handle 0x0007, DMI type 7, 19 bytes Cache Information Socket Designation: L3-Cache Configuration: Enabled, Not Socketed, Level 3 Operational Mode: Varies With Memory Address Location: Internal Installed Size: 2048 kB Maximum Size: 2048 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 4-way Set-associative Handle 0x0008, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1A1 Internal Connector Type: None External Reference Designator: PS2Mouse External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0009, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1A1 Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A2 Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A2 Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6A1 Internal Connector Type: None External Reference Designator: Audio Mic In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6A1 Internal Connector Type: None External Reference Designator: Audio Line In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6A1 Internal Connector Type: None External Reference Designator: Audio Line Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J5A1 Internal Connector Type: None External Reference Designator: USB3 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J4J1 - FLOPPY Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9H1 - FRONT PNL Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1B1 - CHASSIS REAR FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2F1 - CPU FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J8B4 - FRONT FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9G2 - FNT USB Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6C3 - FP AUD Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2H1 - MAIN POWER Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0018, DMI type 9, 13 bytes System Slot Information Designation: PCIE_x16 Type: 32-bit PCI Express Current Usage: In Use Length: Short ID: 32 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0019, DMI type 9, 13 bytes System Slot Information Designation: PCIE_x1_1 Type: 32-bit PCI Express Current Usage: In Use Length: Short ID: 33 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x001A, DMI type 9, 13 bytes System Slot Information Designation: PCIE_x1_2 Type: 32-bit PCI Express Current Usage: Available Length: Short ID: 34 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x001B, DMI type 9, 13 bytes System Slot Information Designation: PCIE_x1_3 Type: 32-bit PCI Express Current Usage: Available Length: Short ID: 35 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x001C, DMI type 9, 13 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Available Length: Short ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x001D, DMI type 9, 13 bytes System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: Available Length: Short ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x001E, DMI type 10, 6 bytes On Board Device Information Type: Video Status: Enabled Description: Handle 0x001F, DMI type 11, 5 bytes OEM Strings String 1: OS=LX;## String 2: String 3: String 4: String 5: String 6: String 7: String 8: String 9: String 10: String 11: String 12: String 13: String 14: String 15: String 16: String 17: String 18: String 19: String 20: String 21: String 22: String 23: String 24: String 25: String 26: String 27: String 28: String 29: String 30: String 31: String 32: Handle 0x0020, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1 Handle 0x0021, DMI type 15, 35 bytes System Event Log Area Length: 4 bytes Header Start Offset: 0x0000 Header Length: 2 bytes Data Start Offset: 0x0002 Access Method: Indexed I/O, one 16-bit index port, one 8-bit data port Access Address: Index 0x046A, Data 0x046C Status: Invalid, Not Full Change Token: 0x00000000 Header Format: No Header Supported Log Type Descriptors: 6 Descriptor 1: End of log Data Format 1: OEM-specific Descriptor 2: End of log Data Format 2: OEM-specific Descriptor 3: End of log Data Format 3: OEM-specific Descriptor 4: End of log Data Format 4: OEM-specific Descriptor 5: End of log Data Format 5: OEM-specific Descriptor 6: End of log Data Format 6: OEM-specific Handle 0x0022, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 8 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0023, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Array Handle: 0x0022 Partition Width: 1 Handle 0x0024, DMI type 17, 27 bytes Memory Device Array Handle: 0x0022 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: DIMM0 Bank Locator: BANK0 Type: DDR2 Type Detail: Synchronous Speed: 800 MHz Manufacturer: AD00000000000000 Serial Number: SerNum0 Asset Tag: AssetTagNum0 Part Number: HYMP112U64CP8-S6 Handle 0x0025, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0024 Memory Array Mapped Address Handle: 0x0023 Partition Row Position: 1 Handle 0x0026, DMI type 17, 27 bytes Memory Device Array Handle: 0x0022 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: Other Set: None Locator: DIMM1 Bank Locator: BANK1 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: Serial Number: SerNum1 Asset Tag: AssetTagNum1 Part Number: Handle 0x0027, DMI type 126, 19 bytes Inactive Handle 0x0028, DMI type 17, 27 bytes Memory Device Array Handle: 0x0022 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: DIMM2 Bank Locator: BANK2 Type: DDR2 Type Detail: Synchronous Speed: 800 MHz Manufacturer: AD00000000000000 Serial Number: SerNum2 Asset Tag: AssetTagNum2 Part Number: HYMP112U64CP8-S6 Handle 0x0029, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00040000000 Ending Address: 0x0007FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0028 Memory Array Mapped Address Handle: 0x0023 Partition Row Position: 1 Handle 0x002A, DMI type 17, 27 bytes Memory Device Array Handle: 0x0022 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: Other Set: None Locator: DIMM3 Bank Locator: BANK3 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: Serial Number: SerNum3 Asset Tag: AssetTagNum3 Part Number: Handle 0x002B, DMI type 126, 19 bytes Inactive Handle 0x002C, DMI type 32, 20 bytes System Boot Information Status: No errors detected Handle 0x002D, DMI type 127, 4 bytes End Of Table linux-uphg:/usr/sbin # biosdecode # biosdecode 2.11 BIOS32 Service Directory present. Revision: 0 Calling Interface Address: 0x000F0010 PCI Interrupt Routing 1.0 present. Router ID: 00:01.4 Exclusive IRQs: None Compatible Router: 10de:0568 Slot Entry 1: ID 00:01, on-board Slot Entry 2: ID 00:02, on-board Slot Entry 3: ID 00:04, on-board Slot Entry 4: ID 00:07, on-board Slot Entry 5: ID 00:0b, on-board Slot Entry 6: ID 00:10, on-board Slot Entry 7: ID 03:00, slot number 32 Slot Entry 8: ID 00:11, on-board Slot Entry 9: ID 04:00, slot number 34 Slot Entry 10: ID 05:00, slot number 35 Slot Entry 11: ID 06:00, slot number 36 Slot Entry 12: ID 00:15, on-board Slot Entry 13: ID 00:16, on-board Slot Entry 14: ID 00:17, on-board Slot Entry 15: ID 01:08, slot number 3 Slot Entry 16: ID 01:09, slot number 4 Slot Entry 17: ID 01:0a, slot number 6 Slot Entry 18: ID 01:06, slot number 1 Slot Entry 19: ID 01:07, slot number 2 Slot Entry 20: ID 01:05, on-board Slot Entry 21: ID 02:00, on-board Slot Entry 22: ID 00:12, on-board Slot Entry 23: ID 00:13, on-board Slot Entry 24: ID 00:14, on-board Slot Entry 25: ID 00:09, on-board Slot Entry 26: ID 00:0a, on-board PNP BIOS 1.0 present. Event Notification: Not Supported Real Mode 16-bit Code Address: F000:8332 Real Mode 16-bit Data Address: F000:0000 16-bit Protected Mode Code Address: 0x000F835A 16-bit Protected Mode Data Address: 0x000F0000 ACPI 1.0 present. OEM Identifier: HPQOEM RSD Table 32-bit Address: 0x6FFA0000 SMBIOS 2.5 present. Structure Table Length: 4064 bytes Structure Table Address: 0x0009EC00 Number Of Structures: 46 Maximum Structure Size: 2086 bytes

1 0

Re: [flashrom] [PATCH 11/12] add support for Intel Hardware Sequencing
by Stefan Tauner 23 Jun '11

23 Jun '11

On Mon, 20 Jun 2011 11:54:45 -0700 David Hendricks <dhendrix(a)google.com> wrote: > On Tue, Jun 7, 2011 at 7:55 PM, Stefan Tauner < > stefan.tauner(a)student.tuwien.ac.at> wrote: > > > +static uint32_t ich_hwseq_get_erase_block_size(unsigned int addr) > > +{ > > + REGWRITE32(ICH9_REG_FADDR, (addr & 0x00FFFFFF)); > > + uint8_t enc_berase = (REGREAD16(ICH9_REG_HSFS) & HSFS_BERASE) >> > > + HSFS_BERASE_OFF; > > + const uint32_t dec_berase[4] = { > > + 256, > > + 4 * 1024, > > + 8 * 1024, > > + 64 * 1024 > > + }; > > > + return dec_berase[enc_berase]; > > > > Others might want to comment, but I think you should avoid doing all that > work in the variable declaration area. no need. you are correct, i have revamped it. thanks > > > +} > > + > > +int ich_hwseq_probe(struct flashchip *flash) > > +{ > > + uint32_t total_size, boundary; > > + uint32_t erase_size_low, size_low, erase_size_high, size_high; > > + struct block_eraser eraser; > > > > This should be a pointer, right? I am assuming you intended to directly > update the flash->block_erasers[0] member later in this function. inderdaad! :) thanks a lot, fixup! patch attached. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 2

Hi here comes output file for AsRock_ION330HT :) Have a small question too
by Joe Dennis 23 Jun '11

23 Jun '11

Hi Flashrom.org Text from here is about the D1826 mainboard. also I have a question, do you think that your software will support the D1826 mainboard? I supplied the CPU-Z dump from that machine. I have tried to find a way to decompress/decode the fujitsu siemens OCF file that the official bios update software uses but no luck there. It's 376kb or something like that and I believe the flash is 512kb. I'm thinking about running it (fujitsu bios update software) in a debugger, halting the process and reading out the raw bios data from RAM, although I will find it complicated to find the correct offset where the raw bios data starts. So, if your software could read out the raw data from the D1826 mainboard flash chip, and also later on let me write it back I'd be very happy. I saw somebody else had posted that they had luck reading out and writing the flash for a newer fujitsu siemens desktop machine with your flashrom util so looks promising. Hoping for a quick reply :) Thanks for helping out

1 0

[Patch] Add support for EN25Q series SPI flash chips
by David Hendricks 22 Jun '11

22 Jun '11

Hello, The attached patch adds support for the following Eon SPI flash chips: EN25Q40, EN25Q80, EN25Q32A/B, EN25Q64, and EN25Q128 I was going to add support for the EN25Q16 as well, but found that it shares the same ID as the EN25D16 but has different write protection capabilities. So I added a comment instead. I do not have real hardware to test with at the moment, so I left the status as untested. Datasheets available from Eon @ http://www.eonssi.com/products/products.aspx -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

2 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom