flashrom

flashrom@flashrom.org

8 participants
9164 discussions

Re: [flashrom] flashrom issues on our X86 blades.
by Stefan Tauner 04 May '13

04 May '13

On Wed, 24 Apr 2013 09:47:46 +0000 Andrew Zhao <Andrew.Zhao(a)radisys.com> wrote: > Hi flashrom experts: > > When I run "flashrom" on our X86 blades, there are some WARNING info , I am very appreciated if you can take a look > Into it and give some comments. http://flashrom.org/ME -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

flashrom on Thinkpad X301
by Joerg Albert 04 May '13

04 May '13

Hi, I ran flashrom on a Thinkpad X301 today with the result of the attached logfile. Just tried to get a dump of the BIOS, no writing intended. According to the schematics the BIOS chip is connected to the ICH9 only, so I guess reading the flash won't interfere with the EC. Any idea on how to work around the error? Regards, Jörg

2 1

Re: [flashrom] SN68SG2 shuttle xpc
by Stefan Tauner 04 May '13

04 May '13

On Tue, 30 Apr 2013 16:28:01 -0400 "Randolph C. Karrh" <rckarrh(a)gmail.com> wrote: > Greetings: > > I am planning to flashrom a *SN68*SG2 2007 shuttle PC. I know its not one > of your supported hardware systems, but it appears that if you can support > fn78 series this should be a no brainier too. > > Does anyone have any experience with the SN68 series? > > I have time, and I shall wait your reply. Did you read the text above the table too? http://flashrom.org/Supported_hardware#Supported_mainboards We just don't know and you have to try. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

(no subject)
by koval vovan 03 May '13

03 May '13

flashrom -p ft2232_spi:type=2232H -Vr bak.bin flashrom v0.9.6.1-r1672 on Linux 3.8.0-19-lowlatency (i686) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.3, little endian Command line (4 args): flashrom -p ft2232_spi:type=2232H -Vr bak.bin Calibrating delay loop... OS timer resolution is 1 usecs, 2580M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 998 us, 10000 myus = 9983 us, 4 myus = 4 us, OK. Initializing ft2232_spi programmer Using device type FTDI FT2232H channel A. FTDI chip type 2 is not high-speed. Set clock divisor MPSSE clock: 12.000000 MHz, divisor: 2, SPI clock: 6.000000 MHz No loopback of TDI/DO TDO/DI Set data bits The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res3: id1 0x1414, id2 0x14 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x1414, id2 0x14 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xd5, id2 0x14 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xd5, id2 0x14 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xd5, id2 0x14 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on ft2232_spi. Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xd5, id2 0x14 Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI). === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Read is not working on this chip. Aborting.

3 2

Re: [flashrom] [PATCH] dediprog: add support for chip select.
by Carl-Daniel Hailfinger 03 May '13

03 May '13

Am 01.05.2013 01:21 schrieb Stefan Tauner: > Thanks to the traces captured by Martin Roth, and confirmed by tests > and analysis by Joshua Zarr, we can now use both target chips on the > Dediprog SF100. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Excellent detective work! Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1673 - trunk
by repository service 03 May '13

03 May '13

Author: stefanct Date: Fri May 3 23:58:28 2013 New Revision: 1673 URL: http://flashrom.org/trac/flashrom/changeset/1673 Log: dediprog: add support for chip select. Thanks to the traces captured and tests done by Martin Roth, and confirmed by tests and analysis by Joshua Zarr too, we can now use both target chips on the Dediprog SF100. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/dediprog.c trunk/flashrom.8 Modified: trunk/dediprog.c ============================================================================== --- trunk/dediprog.c Wed May 1 16:04:19 2013 (r1672) +++ trunk/dediprog.c Fri May 3 23:58:28 2013 (r1673) @@ -560,19 +560,22 @@ } #endif -/* Command C is only sent after dediprog_check_devicestring, but not after every +/* Command Chip Select is only sent after dediprog_check_devicestring, but not after every * invocation of dediprog_check_devicestring. It is only sent after the first * dediprog_command_a(); dediprog_check_devicestring() sequence in each session. - * I'm tempted to call this one start_SPI_engine or finish_init. + * Bit #1 of the value changes the chip select: 0 is target 1, 1 is target 2 and parameter target can be 1 or 2 + * respectively. We don't know how to encode "3, Socket" and "0, reference card" yet. On SF100 the vendor + * software "DpCmd 6.0.4.06" selects target 2 when requesting 3 (which is unavailable on that hardware). */ -static int dediprog_command_c(void) +static int dediprog_chip_select(int target) { int ret; - - ret = usb_control_msg(dediprog_handle, 0x42, 0x4, 0x0, 0x0, NULL, + uint16_t value = ((target - 1) & 1) << 1; + msg_pdbg("Selecting target chip %i\n", target); + ret = usb_control_msg(dediprog_handle, 0x42, 0x4, value, 0x0, NULL, 0x0, DEFAULT_TIMEOUT); if (ret != 0x0) { - msg_perr("Command C failed (%s)!\n", usb_strerror()); + msg_perr("Command Chip Select failed (%s)!\n", usb_strerror()); return 1; } return 0; @@ -722,7 +725,7 @@ return millivolt; } -static int dediprog_setup(void) +static int dediprog_setup(long target) { /* URB 6. Command A. */ if (dediprog_command_a()) { @@ -737,8 +740,8 @@ if (dediprog_check_devicestring()) { return 1; } - /* URB 10. Command C. */ - if (dediprog_command_c()) { + /* URB 10. Command Chip Select */ + if (dediprog_chip_select(target)) { return 1; } return 0; @@ -785,10 +788,11 @@ int dediprog_init(void) { struct usb_device *dev; - char *voltage, *device, *spispeed; + char *voltage, *device, *spispeed, *target_str; int spispeed_idx = 2; int millivolt = 3500; long usedevice = 0; + long target = 1; int i, ret; msg_pspew("%s\n", __func__); @@ -841,6 +845,30 @@ } free(device); + target_str = extract_programmer_param("target"); + if (target_str) { + char *target_suffix; + errno = 0; + target = strtol(target_str, &target_suffix, 10); + if (errno != 0 || target_str == target_suffix) { + msg_perr("Error: Could not convert 'target'.\n"); + free(target_str); + return 1; + } + if (target < 1 || target > 2) { + msg_perr("Error: Value for 'target' is out of range.\n"); + free(target_str); + return 1; + } + if (strlen(target_suffix) > 0) { + msg_perr("Error: Garbage following 'target' value.\n"); + free(target_str); + return 1; + } + msg_pinfo("Using target %li.\n", target); + } + free(target_str); + /* Here comes the USB stuff. */ usb_init(); usb_find_busses(); @@ -877,13 +905,13 @@ dediprog_set_leds(PASS_ON|BUSY_ON|ERROR_ON); /* Perform basic setup. */ - if (dediprog_setup()) { + if (dediprog_setup(target)) { dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); return 1; } /* After setting voltage and speed, perform setup again. */ - if (dediprog_set_spi_voltage(0) || dediprog_set_spi_speed(spispeed_idx) || dediprog_setup()) { + if (dediprog_set_spi_voltage(0) || dediprog_set_spi_speed(spispeed_idx) || dediprog_setup(target)) { dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); return 1; } Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Wed May 1 16:04:19 2013 (r1672) +++ trunk/flashrom.8 Fri May 3 23:58:28 2013 (r1673) @@ -692,6 +692,18 @@ can be .BR 375k ", " 750k ", " 1.5M ", " 2.18M ", " 3M ", " 8M ", " 12M " or " 24M (in Hz). The default is a frequency of 12 MHz. +.sp +An optional +.B target +parameter specifies which target chip should be used. Syntax is +.sp +.B " flashrom \-p dediprog:target=value" +.sp +where +.B value +can be +.BR 1 " or " 2 +to select target chip 1 or 2 repectively. The default is target chip 1. .SS .BR "rayer_spi " programmer The default I/O base address used for the parallel port is 0x378 and you can use

1 0

Test report for multiple SPI flash chips on serprog with UNTESTED status
by Chi Zhang 03 May '13

03 May '13

The programmer is my newly built serprog with STM32 MCU. Please refer to https://github.com/dword1511/serprog-stm32vcp . These flash chips are first bought to test the programmer rather than flashrom itself :) The programmer has been verified by me with a commercial CH341A-based programmer, and a few bricks as well :) Some performance information about flashrom with these chips can be found at: https://github.com/dword1511/serprog-stm32vcp/blob/master/PERFORMANCE (btw, SST25VF040B is really slow at writing! Is it supposed to be this slow?) The pasted logs are organized in probe-write-read-erase sequences. AT25F512A: http://paste.flashrom.org/view.php?id=1569 AT26DF161A: http://paste.flashrom.org/view.php?id=1570 EN25F05: http://paste.flashrom.org/view.php?id=1571 MX25L12845E(mistaken as 'MX25L12805(D)'): http://paste.flashrom.org/view.php?id=1572 Pm25LV010A: http://paste.flashrom.org/view.php?id=1573 SST25VF040B: http://paste.flashrom.org/view.php?id=1574 SST25VF040B with REMS: http://paste.flashrom.org/view.php?id=1575 M25P05-A: http://paste.flashrom.org/view.php?id=1576

2 14

Looking for dediprog users...
by Stefan Tauner 03 May '13

03 May '13

hi, if you are using an sf100 with a firmware version between 2.1.1 and 5.1.2 (non-inclusive), I would like to know from you if flashrom version r1649 or newer works for you or not. Probing for a chip (even if there is none attached) suffices as a test. Apparently earlier versions do not support setting the spi clock rate, but we always do that (since r1649) and fail programmer initialization on those versions. I try to find out which versions support setting the speed. BTW did anybody try to contact dediprog and request any information that would help flashrom to support their programmers better? I would also like to know if any dediprog sf300 or sf600 users are reading this and would like to see support for it in flashrom. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

3 3

GSoC Google Summer of Code 2013: Work for flashrom!
by Carl-Daniel Hailfinger 01 May '13

01 May '13

Hi, TL;DR: GSoC student proposal deadline is ~36 hours from now. Submit your proposal now! As you might already know (see the various announcements on IRC and our website), flashrom is participating in GSoC this year as part of the coreboot organization. This is your chance to work on flashrom and earn money at the same time. A list of possible student projects is here: http://www.flashrom.org/GSoC Apply here (we're part of the coreboot org): http://www.google-melange.com/gsoc/org/google/gsoc2013/coreboot Good luck! Regards, Carl-Daniel -- http://www.hailfinger.org/

1 0

[commit] r1672 - trunk
by repository service 01 May '13

01 May '13

Author: stefanct Date: Wed May 1 16:04:19 2013 New Revision: 1672 URL: http://flashrom.org/trac/flashrom/changeset/1672 Log: Update spi_get_erasefn_from_opcode(). We forgot to add a few SPI erase functions to the helper function that is used for SFDP. Also, sort the declarations in the header. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/chipdrivers.h trunk/spi25.c Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Fri Apr 19 03:59:15 2013 (r1671) +++ trunk/chipdrivers.h Wed May 1 16:04:19 2013 (r1672) @@ -45,12 +45,12 @@ int spi_block_erase_20(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_50(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_52(struct flashctx *flash, unsigned int addr, unsigned int blocklen); -int spi_block_erase_81(struct flashctx *flash, unsigned int addr, unsigned int blocklen); -int spi_block_erase_d7(struct flashctx *flash, unsigned int addr, unsigned int blocklen); -int spi_block_erase_d8(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_60(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_62(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_81(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_c7(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_d7(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_d8(struct flashctx *flash, unsigned int addr, unsigned int blocklen); erasefunc_t *spi_get_erasefn_from_opcode(uint8_t opcode); int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int spi_byte_program(struct flashctx *flash, unsigned int addr, uint8_t databyte); Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Fri Apr 19 03:59:15 2013 (r1671) +++ trunk/spi25.c Wed May 1 16:04:19 2013 (r1672) @@ -729,10 +729,16 @@ return NULL; case 0x20: return &spi_block_erase_20; + case 0x50: + return &spi_block_erase_50; case 0x52: return &spi_block_erase_52; case 0x60: return &spi_block_erase_60; + case 0x62: + return &spi_block_erase_62; + case 0x81: + return &spi_block_erase_81; case 0xc7: return &spi_block_erase_c7; case 0xd7:

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom