Hello,
I successfully tested the following patch with read, erase and write
but I don't know how do I choose a value for .page_size?
Signed-off-by: Daniele Forsi <dforsi(a)gmail.com>
Index: flashchips.c
===================================================================
--- flashchips.c (revision 1822)
+++ flashchips.c (working copy)
@@ -6996,6 +6996,38 @@
{
.vendor = "Macronix",
+ .name = "MX29F022(N)T",
+ .bustype = BUS_PARALLEL,
+ .manufacture_id = MACRONIX_ID,
+ .model_id = MACRONIX_MX29F022T,
+ .total_size = 256,
+ .page_size = 32 * 1024,
+ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
+ .tested = TEST_OK_PREW,
+ .probe = probe_jedec,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = {
+ {64 * 1024, 3},
+ {32 * 1024, 1},
+ {8 * 1024, 2},
+ {16 * 1024, 1},
+ },
+ .block_erase = erase_sector_jedec,
+ }, {
+ .eraseblocks = { {256 * 1024, 1} },
+ .block_erase = erase_chip_block_jedec,
+ }
+ },
+ .write = write_jedec_1,
+ .read = read_memmapped,
+ .voltage = {4500, 5500},
+ },
+
+ {
+ .vendor = "Macronix",
.name = "MX29F040",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,