Due to the mysterious address handling of this chip the user can specify
a base address with the offset parameter, e.g.:
flashrom -p atavia:offset=0xFFF00000
Thanks to Idwer Vollering for his iterative testing of this code.
TODO: remove or document the offset parameter.
Signed-off-by: Jonathan Kollasch <jakllsch(a)kollasch.net>
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
---
The last iteration did not work because the offset set by the macro
was in *addition* to the standard 0xfff80000 offset, but probably no
one noticed that. Also, there was a small bug in the prettyprint func.
By default this version will use the standard offset, but one can
force another one. Please do so if the default does not work and
report back with a -VVV log, thanks!
As always this patch is based on the latest svn (r1593).
Makefile | 9 +++
atavia.c | 206 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
flash.h | 3 +-
flashrom.c | 17 ++++-
print.c | 5 ++
programmer.h | 14 +++-
6 files changed, 248 insertions(+), 6 deletions(-)
create mode 100644 atavia.c
diff --git a/Makefile b/Makefile
index 9309ce5..e4b364d 100644
--- a/Makefile
+++ b/Makefile
@@ -334,6 +334,9 @@ CONFIG_SATASII ?= yes
# IMPORTANT: This code is not yet working!
CONFIG_ATAHPT ?= no
+# VIA VT6421A LPC memory support
+CONFIG_ATAVIA ?= yes
+
# Always enable FT2232 SPI dongles for now.
CONFIG_FT2232_SPI ?= yes
@@ -459,6 +462,12 @@ PROGRAMMER_OBJS += atahpt.o
NEED_PCI := yes
endif
+ifeq ($(CONFIG_ATAVIA), yes)
+FEATURE_CFLAGS += -D'CONFIG_ATAVIA=1'
+PROGRAMMER_OBJS += atavia.o
+NEED_PCI := yes
+endif
+
ifeq ($(CONFIG_FT2232_SPI), yes)
FTDILIBS := $(shell pkg-config --libs libftdi 2>/dev/null || printf "%s" "-lftdi -lusb")
# This is a totally ugly hack.
diff --git a/atavia.c b/atavia.c
new file mode 100644
index 0000000..e21fed3
--- /dev/null
+++ b/atavia.c
@@ -0,0 +1,206 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2010 Uwe Hermann <uwe(a)hermann-uwe.de>
+ * Copyright (C) 2011 Jonathan Kollasch <jakllsch(a)kollasch.net>
+ * Copyright (C) 2012 Stefan Tauner
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdbool.h>
+#include <stdlib.h>
+#include <string.h>
+#include "flash.h"
+#include "programmer.h"
+#include "hwaccess.h"
+
+#define PCI_VENDOR_ID_VIA 0x1106
+
+#define VIA_MAX_RETRIES 300
+
+#define BROM_ADDR 0x60
+
+#define BROM_DATA 0x64
+
+#define BROM_ACCESS 0x68
+#define BROM_TRIGGER 0x80
+#define BROM_WRITE 0x40
+#define BROM_SIZE_MASK 0x30
+#define BROM_SIZE_64K 0x00
+#define BROM_SIZE_32K 0x10
+#define BROM_SIZE_16K 0x20
+#define BROM_SIZE_0K 0x30
+#define BROM_BYTE_ENABLE_MASK 0x0f
+
+#define BROM_STATUS 0x69
+#define BROM_ERROR_STATUS 0x80
+
+/* Select the byte we want to access. This is done by clearing the bit corresponding to the byte we want to
+ * access, leaving the others set (yes, really). */
+#define ENABLE_BYTE(address) ((~(1 << ((address) & 3))) & BROM_BYTE_ENABLE_MASK)
+#define BYTE_OFFSET(address) (((addr) & 3) * 8)
+
+const struct pcidev_status ata_via[] = {
+ {PCI_VENDOR_ID_VIA, 0x3249, NT, "VIA", "VT6421A"},
+
+ {},
+};
+
+static const struct par_programmer lpc_programmer_atavia = {
+ .chip_readb = atavia_chip_readb,
+ .chip_readw = fallback_chip_readw,
+ .chip_readl = fallback_chip_readl,
+ .chip_readn = fallback_chip_readn,
+ .chip_writeb = atavia_chip_writeb,
+ .chip_writew = fallback_chip_writew,
+ .chip_writel = fallback_chip_writel,
+ .chip_writen = fallback_chip_writen,
+};
+
+static void *atavia_offset = NULL;
+
+static void atavia_prettyprint_access(uint8_t access)
+{
+ uint8_t bmask = access & BROM_BYTE_ENABLE_MASK;
+ uint8_t size = access & BROM_SIZE_MASK;
+
+ msg_pspew("Accessing byte(s):%s%s%s%s\n",
+ ((bmask & (1<<3)) == 0) ? " 3" : "",
+ ((bmask & (1<<2)) == 0) ? " 2" : "",
+ ((bmask & (1<<1)) == 0) ? " 1" : "",
+ ((bmask & (1<<0)) == 0) ? " 0" : "");
+ if (size == BROM_SIZE_0K) {
+ msg_pspew("No ROM device found.\n");
+ } else
+ msg_pspew("ROM device with %s kB attached.\n",
+ (size == BROM_SIZE_64K) ? ">=64" :
+ (size == BROM_SIZE_32K) ? "32" : "16");
+ msg_pspew("Access is a %s.\n", (access & BROM_WRITE) ? "write" : "read");
+ msg_pspew("Device is %s.\n", (access & BROM_TRIGGER) ? "busy" : "ready");
+}
+
+static bool atavia_ready(void)
+{
+ int try;
+ uint8_t access, status;
+ bool ready = false;
+
+ for (try = 0; try < VIA_MAX_RETRIES; try++) {
+ access = pci_read_byte(pcidev_dev, BROM_ACCESS);
+ status = pci_read_byte(pcidev_dev, BROM_STATUS);
+ if (((access & BROM_TRIGGER) == 0) && (status & BROM_ERROR_STATUS) == 0) {
+ ready = true;
+ break;
+ } else {
+ programmer_delay(1);
+ continue;
+ }
+ }
+
+ msg_pdbg2("\n%s: %s after %d tries (access=0x%02x, status=0x%02x)\n",
+ __func__, ready ? "suceeded" : "failed", try, access, status);
+ atavia_prettyprint_access(access);
+ return ready;
+}
+
+static int atavia_shutdown(void *data)
+{
+ pci_cleanup(pacc);
+ return 0;
+}
+
+void *atavia_map(const char *descr, unsigned long phys_addr, size_t len)
+{
+ return (atavia_offset != 0) ? atavia_offset : (void *)phys_addr;
+}
+
+int atavia_init(void)
+{
+ uint32_t tmp;
+ char *arg;
+
+ arg = extract_programmer_param("offset");
+ if (arg) {
+ if (strlen(arg) == 0) {
+ msg_perr("Missing argument for offset.\n");
+ free(arg);
+ return ERROR_FATAL;
+ }
+ char *endptr;
+ atavia_offset = (void *)strtoul(arg, &endptr, 0);
+ if (*endptr) {
+ msg_perr("Error: Invalid offset specified: \"%s\".\n", arg);
+ free(arg);
+ return ERROR_FATAL;
+ }
+ msg_pinfo("Mapping addresses to base %p.\n", atavia_offset);
+ }
+ free(arg);
+
+ if (rget_io_perms())
+ return 1;
+
+ pcidev_init(PCI_ROM_ADDRESS, ata_via); /* Acutally no BAR setup needed at all. */
+
+ if (register_shutdown(atavia_shutdown, NULL))
+ return 1;
+
+ /* Test if a flash chip is attached. */
+ pci_write_long(pcidev_dev, PCI_ROM_ADDRESS, (uint32_t)PCI_ROM_ADDRESS_MASK);
+ programmer_delay(90);
+ tmp = pci_read_long(pcidev_dev, PCI_ROM_ADDRESS);
+ msg_pdbg2("BROM base=0x%08x\n", tmp);
+ if ((tmp & PCI_ROM_ADDRESS_MASK) == 0) {
+ msg_perr("Controller thinks there is no ROM attached.\n");
+ }
+
+ if (!atavia_ready()) {
+ msg_perr("Controller not ready.\n");
+ }
+
+ register_par_programmer(&lpc_programmer_atavia, BUS_LPC);
+
+ return 0;
+}
+
+void atavia_chip_writeb(const struct flashctx *flash, uint8_t val, const chipaddr addr)
+{
+ msg_pspew("%s: 0x%02x to 0x%08lx.\n", __func__, val, addr);
+ pci_write_long(pcidev_dev, BROM_ADDR, (addr & ~3));
+ pci_write_long(pcidev_dev, BROM_DATA, val << BYTE_OFFSET(addr));
+ pci_write_byte(pcidev_dev, BROM_ACCESS, BROM_TRIGGER | BROM_WRITE | ENABLE_BYTE(addr));
+
+ if (!atavia_ready()) {
+ msg_perr("not ready after write\n");
+ }
+}
+
+uint8_t atavia_chip_readb(const struct flashctx *flash, const chipaddr addr)
+{
+ uint8_t val;
+
+ pci_write_long(pcidev_dev, BROM_ADDR, (addr & ~3));
+ pci_write_byte(pcidev_dev, BROM_ACCESS, BROM_TRIGGER | ENABLE_BYTE(addr));
+
+ if (!atavia_ready()) {
+ msg_perr("not ready after read\n");
+ }
+
+ val = (pci_read_long(pcidev_dev, BROM_DATA) >> BYTE_OFFSET(addr)) & 0xff;
+
+ msg_pspew("%s: 0x%02x from 0x%08lx.\n", __func__, val, addr);
+ return val;
+}
diff --git a/flash.h b/flash.h
index 2990202..da26344 100644
--- a/flash.h
+++ b/flash.h
@@ -41,8 +41,7 @@
typedef unsigned long chipaddr;
int register_shutdown(int (*function) (void *data), void *data);
-void *programmer_map_flash_region(const char *descr, unsigned long phys_addr,
- size_t len);
+void *programmer_map_flash_region(const char *const descr, unsigned long phys_addr, size_t len);
void programmer_unmap_flash_region(void *virt_addr, size_t len);
void programmer_delay(int usecs);
diff --git a/flashrom.c b/flashrom.c
index fdc5412..43daa17 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -152,6 +152,16 @@ const struct programmer_entry programmer_table[] = {
},
#endif
+#if CONFIG_ATAVIA == 1
+ {
+ .name = "atavia",
+ .init = atavia_init,
+ .map_flash_region = atavia_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
#if CONFIG_FT2232_SPI == 1
{
.name = "ft2232_spi",
@@ -354,11 +364,12 @@ int programmer_shutdown(void)
return ret;
}
-void *programmer_map_flash_region(const char *descr, unsigned long phys_addr,
+void *programmer_map_flash_region(const char *const descr, unsigned long phys_addr,
size_t len)
{
- return programmer_table[programmer].map_flash_region(descr,
- phys_addr, len);
+ void *ret = programmer_table[programmer].map_flash_region(descr, phys_addr, len);
+ msg_gspew("%s: mapping %s from 0x%08lx to %p\n", __func__, descr, phys_addr, ret);
+ return ret;
}
void programmer_unmap_flash_region(void *virt_addr, size_t len)
diff --git a/print.c b/print.c
index 582a49e..724f91c 100644
--- a/print.c
+++ b/print.c
@@ -487,6 +487,11 @@ void print_supported(void)
programmer_table[PROGRAMMER_ATAHPT].name);
print_supported_pcidevs(ata_hpt);
#endif
+#if CONFIG_ATAVIA == 1
+ printf("\nSupported devices for the %s programmer:\n",
+ programmer_table[PROGRAMMER_ATAVIA].name);
+ print_supported_pcidevs(ata_via);
+#endif
#if CONFIG_FT2232_SPI == 1
msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_FT2232_SPI].name);
diff --git a/programmer.h b/programmer.h
index 51b9c40..1bbec51 100644
--- a/programmer.h
+++ b/programmer.h
@@ -54,6 +54,9 @@ enum programmer {
#if CONFIG_ATAHPT == 1
PROGRAMMER_ATAHPT,
#endif
+#if CONFIG_ATAVIA == 1
+ PROGRAMMER_ATAVIA,
+#endif
#if CONFIG_FT2232_SPI == 1
PROGRAMMER_FT2232_SPI,
#endif
@@ -239,7 +242,7 @@ int rpci_write_long(struct pci_dev *dev, int reg, uint32_t data);
#endif
/* print.c */
-#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_NICINTEL+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI+CONFIG_SATAMV >= 1
+#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_ATAVIA+CONFIG_NICINTEL+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI+CONFIG_SATAMV >= 1
/* Not needed for CONFIG_INTERNAL, but for all other PCI-based programmers. */
void print_supported_pcidevs(const struct pcidev_status *devs);
#endif
@@ -420,6 +423,15 @@ int atahpt_init(void);
extern const struct pcidev_status ata_hpt[];
#endif
+/* atavia.c */
+#if CONFIG_ATAVIA == 1
+int atavia_init(void);
+void atavia_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr);
+uint8_t atavia_chip_readb(const struct flashctx *flash, const chipaddr addr);
+void *atavia_map(const char *descr, unsigned long phys_addr, size_t len);
+extern const struct pcidev_status ata_via[];
+#endif
+
/* ft2232_spi.c */
#if CONFIG_FT2232_SPI == 1
struct usbdev_status {
--
Kind regards, Stefan Tauner
