July 2010 - flashrom - mail.coreboot.org

[PATCH] Add chip definitions for Mosel Vitelic
by Mattias Mattsson July 9, 2010

July 9, 2010

Add definitions for the following chips from Mosel Vitelic Corporation: V29C31004B V29C31004T V29C51000B V29C51000T V29C51001B V29C51001T V29C51002B V29C51002T V29C51004B V29C51004T V29C51400B V29C51400T V29LC51000 V29LC51001 V29LC51002 This is one of my first patches ever so I am not at all certain it is correct. Datasheets here: http://www.ezoflash.com/datasheets/flash/Mosel_Vitelic/V29C31004.pdf http://www.ezoflash.com/datasheets/flash/Mosel_Vitelic/V29C51000.pdf http://www.ezoflash.com/datasheets/flash/Mosel_Vitelic/V29C51001.pdf http://www.ezoflash.com/datasheets/flash/Mosel_Vitelic/V29C51002.pdf http://www.ezoflash.com/datasheets/flash/Mosel_Vitelic/V29C51004.pdf http://www.ezoflash.com/datasheets/flash/Mosel_Vitelic/V29C51400.pdf http://www.ezoflash.com/datasheets/flash/Mosel_Vitelic/V29LC51000.pdf http://www.ezoflash.com/datasheets/flash/Mosel_Vitelic/V29LC51001.pdf http://www.ezoflash.com/datasheets/flash/Mosel_Vitelic/V29LC51002.pdf Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Index: flashrom/flashchips.c =================================================================== --- flashrom.orig/flashchips.c 2010-07-09 11:07:44.000000000 +0200 +++ flashrom/flashchips.c 2010-07-09 11:08:01.000000000 +0200 @@ -3166,6 +3166,422 @@ }, { + .vendor = "Mosel Vitelic", + .name = "V29C31004B", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29C31004B, + .total_size = 512, + .page_size = 1024, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 1024, 512}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29C31004T", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29C31004T, + .total_size = 512, + .page_size = 1024, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 1024, 512}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29C51000B", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29C51000B, + .total_size = 64, + .page_size = 512, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 512, 128}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 512, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29C51000T", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29C51000T, + .total_size = 64, + .page_size = 512, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 512, 128}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 512, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29C51001B", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29C51001B, + .total_size = 128, + .page_size = 512, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 512, 256}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 512, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29C51001T", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29C51001T, + .total_size = 128, + .page_size = 512, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 512, 256}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 512, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29C51002B", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29C51002B, + .total_size = 256, + .page_size = 512, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 512, 512}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 512, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29C51002T", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29C51002T, + .total_size = 256, + .page_size = 512, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 512, 512}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 512, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29C51004B", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29C51004B, + .total_size = 512, + .page_size = 1024, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 1024, 512}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29C51004T", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29C51004T, + .total_size = 512, + .page_size = 1024, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 1024, 512}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29C51400B", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29C51400B, + .total_size = 512, + .page_size = 1024, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 1024, 512}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29C51400T", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29C51400T, + .total_size = 512, + .page_size = 1024, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 1024, 512}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29C51400T", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29C51400T, + .total_size = 512, + .page_size = 1024, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 1024, 512}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29LC51000", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29LC51000, + .total_size = 64, + .page_size = 512, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 512, 128}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 512, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29LC51001", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29LC51001, + .total_size = 128, + .page_size = 512, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 512, 256}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 512, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Mosel Vitelic", + .name = "V29LC51002", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MVC_ID, + .model_id = MVC_V29LC51002, + .total_size = 256, + .page_size = 512, + .feature_bits = FEATURE_BYTEWRITES | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1 * 512, 512}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 512, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { .vendor = "Numonyx", .name = "M25PE10", .bustype = CHIP_BUSTYPE_SPI, Index: flashrom/flashchips.h =================================================================== --- flashrom.orig/flashchips.h 2010-07-09 11:07:44.000000000 +0200 +++ flashrom/flashchips.h 2010-07-09 11:08:01.000000000 +0200 @@ -329,6 +329,23 @@ #define MX_29SL800CB 0x6B /* Same as MX29SL802CB */ #define MX_29SL800CT 0xEA /* Same as MX29SL802CT */ +#define MVC_ID 0x40 /* Mosel Vitelic Corp. / SyncMOS */ +#define MVC_V29C31004B 0x73 +#define MVC_V29C31004T 0x63 /* Same as S29C31004T */ +#define MVC_V29C51000B 0xA0 +#define MVC_V29C51000T 0x00 +#define MVC_V29C51001B 0xA1 +#define MVC_V29C51001T 0x01 /* Same as S29C51001T */ +#define MVC_V29C51002B 0xA2 +#define MVC_V29C51002T 0x02 /* Same as S29C51002T */ +#define MVC_V29C51004B 0xA3 +#define MVC_V29C51004T 0x03 /* Same as S29C51004T */ +#define MVC_V29C51400B 0xB3 +#define MVC_V29C51400T 0x13 +#define MVC_V29LC51000 0x20 +#define MVC_V29LC51001 0x60 +#define MVC_V29LC51002 0x82 + /* * Programmable Micro Corp is listed in JEP106W in bank 2, so it should * have a 0x7F continuation code prefix.

2 1

[Fwd: imac mcp79] MCP SPI
by david July 9, 2010

July 9, 2010

1 0

imac mcp79
by david July 9, 2010

July 9, 2010

According to system profiler and benchmark the bios is version IM91.88Z.008D.B08.0904271717 and the board name is Mac-F2218EA9. I could'nt find a bios update file, but i did flashrom -r and the output is here,http://members.iinet.net.au/~dledson/backup.bin i don't know if it works though.

1 0

[PATCH][NOTFORMERGE] Only flash the first 0xf0000 bytes on MX25L8005/ICH8
by Carl-Daniel Hailfinger July 9, 2010

July 9, 2010

This patch is for the laptop of apricot053 on IRC. Here is the log of the failed write: flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "HP Compaq 6820s" DMI string system-version: "F.0B" DMI string baseboard-manufacturer: "Hewlett-Packard" DMI string baseboard-product-name: "30D7" DMI string baseboard-version: "KBC Version 83.13" DMI string chassis-type: "Notebook" Laptop detected via DMI ======================================================================== WARNING! You seem to be running flashrom on a laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. ======================================================================== Found chipset "Intel ICH8M", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed90000 GCS = 0x460: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed90000 + 0x3020 0x04: 0xe008 (HSFS) FLOCKDN 1, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x0000ffff (FRAP) BMWAG 0, BMRAG 0, BRWA 255, BRRA 255 0x54: 0x00000000 (FREG0) 0x58: 0x00ff0003 (FREG1) 0x5C: 0x00000fff (FREG2) 0x60: 0x00020001 (FREG3) 0x64: 0x00000000 (FREG4) 0x74: 0x80ff00f0 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x007f1004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x7f48 (OPTYPE) 0x98: 0x0405039f (OPMENU) 0x9C: 0x0102d820 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00000000 (FDOC) WARNING: SPI Configuration Lockdown activated. Generating OPCODES... done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... 619M loops per second, 100 myus = 209 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT29C512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: RDID returned 0xc2 0x20 0x14 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 KB: RDID returned 0xc2 0x20 0x14 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A29002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25D16, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN29F010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x02, id2 0x37 Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x02, id2 0x37, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF016B, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040.REMS, 512 KB: Invalid OPCODE 0x90 Probing for SST SST25VF040B, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040B.REMS, 512 KB: Invalid OPCODE 0x90 Probing for SST SST25VF080B, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST28SF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x02, id2 0x37, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x02, id2 0x37 Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05.RES, 64 KB: RDID returned 0xc2 0x20 0x14. Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10.RES, 128 KB: RDID returned 0xc2 0x20 0x14. Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 KB: RDID returned 0xc2 0x20 0x14. Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x02, id2 0x37 Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x02, id2 0x37 Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x02, id2 0x37 Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x20, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x40, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x80, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x16, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x32, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x64, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W29C011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x02, id2 0x37, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x02, id2 0x37, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. Invalid OPCODE 0x90 Not unmapping zero size at (nil) === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, 0x001000-0x001fff, 0x002000-0x002fff, 0x003000-0x003fff, 0x004000-0x004fff, 0x005000-0x005fff, 0x006000-0x006fff, 0x007000-0x007fff, 0x008000-0x008fff, 0x009000-0x009fff, 0x00a000-0x00afff, 0x00b000-0x00bfff, 0x00c000-0x00cfff, 0x00d000-0x00dfff, 0x00e000-0x00efff, 0x00f000-0x00ffff, 0x010000-0x010fff, 0x011000-0x011fff, 0x012000-0x012fff, 0x013000-0x013fff, 0x014000-0x014fff, 0x015000-0x015fff, 0x016000-0x016fff, 0x017000-0x017fff, 0x018000-0x018fff, 0x019000-0x019fff, 0x01a000-0x01afff, 0x01b000-0x01bfff, 0x01c000-0x01cfff, 0x01d000-0x01dfff, 0x01e000-0x01efff, 0x01f000-0x01ffff, 0x020000-0x020fff, 0x021000-0x021fff, 0x022000-0x022fff, 0x023000-0x023fff, 0x024000-0x024fff, 0x025000-0x025fff, 0x026000-0x026fff, 0x027000-0x027fff, 0x028000-0x028fff, 0x029000-0x029fff, 0x02a000-0x02afff, 0x02b000-0x02bfff, 0x02c000-0x02cfff, 0x02d000-0x02dfff, 0x02e000-0x02efff, 0x02f000-0x02ffff, 0x030000-0x030fff, 0x031000-0x031fff, 0x032000-0x032fff, 0x033000-0x033fff, 0x034000-0x034fff, 0x035000-0x035fff, 0x036000-0x036fff, 0x037000-0x037fff, 0x038000-0x038fff, 0x039000-0x039fff, 0x03a000-0x03afff, 0x03b000-0x03bfff, 0x03c000-0x03cfff, 0x03d000-0x03dfff, 0x03e000-0x03efff, 0x03f000-0x03ffff, 0x040000-0x040fff, 0x041000-0x041fff, 0x042000-0x042fff, 0x043000-0x043fff, 0x044000-0x044fff, 0x045000-0x045fff, 0x046000-0x046fff, 0x047000-0x047fff, 0x048000-0x048fff, 0x049000-0x049fff, 0x04a000-0x04afff, 0x04b000-0x04bfff, 0x04c000-0x04cfff, 0x04d000-0x04dfff, 0x04e000-0x04efff, 0x04f000-0x04ffff, 0x050000-0x050fff, 0x051000-0x051fff, 0x052000-0x052fff, 0x053000-0x053fff, 0x054000-0x054fff, 0x055000-0x055fff, 0x056000-0x056fff, 0x057000-0x057fff, 0x058000-0x058fff, 0x059000-0x059fff, 0x05a000-0x05afff, 0x05b000-0x05bfff, 0x05c000-0x05cfff, 0x05d000-0x05dfff, 0x05e000-0x05efff, 0x05f000-0x05ffff, 0x060000-0x060fff, 0x061000-0x061fff, 0x062000-0x062fff, 0x063000-0x063fff, 0x064000-0x064fff, 0x065000-0x065fff, 0x066000-0x066fff, 0x067000-0x067fff, 0x068000-0x068fff, 0x069000-0x069fff, 0x06a000-0x06afff, 0x06b000-0x06bfff, 0x06c000-0x06cfff, 0x06d000-0x06dfff, 0x06e000-0x06efff, 0x06f000-0x06ffff, 0x070000-0x070fff, 0x071000-0x071fff, 0x072000-0x072fff, 0x073000-0x073fff, 0x074000-0x074fff, 0x075000-0x075fff, 0x076000-0x076fff, 0x077000-0x077fff, 0x078000-0x078fff, 0x079000-0x079fff, 0x07a000-0x07afff, 0x07b000-0x07bfff, 0x07c000-0x07cfff, 0x07d000-0x07dfff, 0x07e000-0x07efff, 0x07f000-0x07ffff, 0x080000-0x080fff, 0x081000-0x081fff, 0x082000-0x082fff, 0x083000-0x083fff, 0x084000-0x084fff, 0x085000-0x085fff, 0x086000-0x086fff, 0x087000-0x087fff, 0x088000-0x088fff, 0x089000-0x089fff, 0x08a000-0x08afff, 0x08b000-0x08bfff, 0x08c000-0x08cfff, 0x08d000-0x08dfff, 0x08e000-0x08efff, 0x08f000-0x08ffff, 0x090000-0x090fff, 0x091000-0x091fff, 0x092000-0x092fff, 0x093000-0x093fff, 0x094000-0x094fff, 0x095000-0x095fff, 0x096000-0x096fff, 0x097000-0x097fff, 0x098000-0x098fff, 0x099000-0x099fff, 0x09a000-0x09afff, 0x09b000-0x09bfff, 0x09c000-0x09cfff, 0x09d000-0x09dfff, 0x09e000-0x09efff, 0x09f000-0x09ffff, 0x0a0000-0x0a0fff, 0x0a1000-0x0a1fff, 0x0a2000-0x0a2fff, 0x0a3000-0x0a3fff, 0x0a4000-0x0a4fff, 0x0a5000-0x0a5fff, 0x0a6000-0x0a6fff, 0x0a7000-0x0a7fff, 0x0a8000-0x0a8fff, 0x0a9000-0x0a9fff, 0x0aa000-0x0aafff, 0x0ab000-0x0abfff, 0x0ac000-0x0acfff, 0x0ad000-0x0adfff, 0x0ae000-0x0aefff, 0x0af000-0x0affff, 0x0b0000-0x0b0fff, 0x0b1000-0x0b1fff, 0x0b2000-0x0b2fff, 0x0b3000-0x0b3fff, 0x0b4000-0x0b4fff, 0x0b5000-0x0b5fff, 0x0b6000-0x0b6fff, 0x0b7000-0x0b7fff, 0x0b8000-0x0b8fff, 0x0b9000-0x0b9fff, 0x0ba000-0x0bafff, 0x0bb000-0x0bbfff, 0x0bc000-0x0bcfff, 0x0bd000-0x0bdfff, 0x0be000-0x0befff, 0x0bf000-0x0bffff, 0x0c0000-0x0c0fff, 0x0c1000-0x0c1fff, 0x0c2000-0x0c2fff, 0x0c3000-0x0c3fff, 0x0c4000-0x0c4fff, 0x0c5000-0x0c5fff, 0x0c6000-0x0c6fff, 0x0c7000-0x0c7fff, 0x0c8000-0x0c8fff, 0x0c9000-0x0c9fff, 0x0ca000-0x0cafff, 0x0cb000-0x0cbfff, 0x0cc000-0x0ccfff, 0x0cd000-0x0cdfff, 0x0ce000-0x0cefff, 0x0cf000-0x0cffff, 0x0d0000-0x0d0fff, 0x0d1000-0x0d1fff, 0x0d2000-0x0d2fff, 0x0d3000-0x0d3fff, 0x0d4000-0x0d4fff, 0x0d5000-0x0d5fff, 0x0d6000-0x0d6fff, 0x0d7000-0x0d7fff, 0x0d8000-0x0d8fff, 0x0d9000-0x0d9fff, 0x0da000-0x0dafff, 0x0db000-0x0dbfff, 0x0dc000-0x0dcfff, 0x0dd000-0x0ddfff, 0x0de000-0x0defff, 0x0df000-0x0dffff, 0x0e0000-0x0e0fff, 0x0e1000-0x0e1fff, 0x0e2000-0x0e2fff, 0x0e3000-0x0e3fff, 0x0e4000-0x0e4fff, 0x0e5000-0x0e5fff, 0x0e6000-0x0e6fff, 0x0e7000-0x0e7fff, 0x0e8000-0x0e8fff, 0x0e9000-0x0e9fff, 0x0ea000-0x0eafff, 0x0eb000-0x0ebfff, 0x0ec000-0x0ecfff, 0x0ed000-0x0edfff, 0x0ee000-0x0eefff, 0x0ef000-0x0effff, 0x0f0000-0x0f0fff, Transaction error! run OPCODE 0x20 failed spi_block_erase_20 failed during command execution at address 0xf0000 Looking at blockwise erase function 1... trying... 0x000000-0x00ffff, Invalid OPCODE 0x06 spi_block_erase_52 failed during command execution at address 0x0 Looking at blockwise erase function 2... trying... 0x000000-0x00ffff, 0x010000-0x01ffff, 0x020000-0x02ffff, 0x030000-0x03ffff, 0x040000-0x04ffff, 0x050000-0x05ffff, 0x060000-0x06ffff, 0x070000-0x07ffff, 0x080000-0x08ffff, 0x090000-0x09ffff, 0x0a0000-0x0affff, 0x0b0000-0x0bffff, 0x0c0000-0x0cffff, 0x0d0000-0x0dffff, 0x0e0000-0x0effff, 0x0f0000-0x0fffff, Transaction error! run OPCODE 0xd8 failed spi_block_erase_d8 failed during command execution at address 0xf0000 Looking at blockwise erase function 3... trying... 0x000000-0x0fffff, Invalid OPCODE 0x06 spi_chip_erase_60 failed during command execution Looking at blockwise erase function 4... trying... 0x000000-0x0fffff, Invalid OPCODE 0x06 spi_chip_erase_c7 failed during command execution FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! This patch should work for exactly one write of the old backup image. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-recover_apricot053/ichspi.c =================================================================== --- flashrom-recover_apricot053/ichspi.c (Revision 1072) +++ flashrom-recover_apricot053/ichspi.c (Arbeitskopie) @@ -686,7 +686,7 @@ int ich_spi_write_256(struct flashchip *flash, uint8_t * buf) { int i, ret = 0; - int total_size = flash->total_size * 1024; + int total_size = 0xf0000; int erase_size = 64 * 1024; int maxdata = 64; @@ -695,9 +695,9 @@ spi_disable_blockprotect(); /* Erase first */ - msg_pinfo("Erasing flash before programming... "); - if (erase_flash(flash)) { - msg_perr("ERASE FAILED!\n"); + msg_pinfo("NOT erasing flash before programming... "); + if (check_erased_range(flash, 0, total_size)) { + msg_perr("To-be-written region is NOT ERASED! Aborting.\n"); return -1; } msg_pinfo("done.\n"); -- http://www.hailfinger.org/

1 0

HP Compaq dc7100 SFF
by Mattias Mattsson July 8, 2010

July 8, 2010

Hi, I'm using flashrom r1070 on a HP Compaq dc7100 (HP branded m/b) and the flash chip is not detected. It's a Winbond W39V040FAP. Latest BIOS is available here: ftp://ftp.hp.com/pub/softpaq/sp40001-40500/sp40405.exe Output from flashrom, superiotool and lspci attached. Please let me know if I can do anything else to help. Thanks, -mattias

3 4

Mosel Vitelic flash rom datasheets needed
by Carl-Daniel Hailfinger July 8, 2010

July 8, 2010

Hi, Mosel Vitelic seems to have closed down in 2009, and I only have one datasheet from them. It would be awesome if anyone could dig up a list of their flash chips and/or related datasheets. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 2

Asus P2B-N
by Mattias Mattsson July 8, 2010

July 8, 2010

Hi, I'm using latest flashrom (r1070) on an Asus P2B-N h/w rev. 1.04. Unfortunately it can't find the flash chip. (It's a MVC V29C51002T-90P). Output from flashrom, superiotool and lspci attached. -mattias

2 2

[PATCH] Make programmer_param static
by Carl-Daniel Hailfinger July 8, 2010

July 8, 2010

Make programmer_param static by converting all users to extract_programmer_param. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-programmer_param_static/flash.h =================================================================== --- flashrom-programmer_param_static/flash.h (Revision 1070) +++ flashrom-programmer_param_static/flash.h (Arbeitskopie) @@ -570,7 +570,6 @@ }; extern struct decode_sizes max_rom_decode; extern int programmer_may_write; -extern char *programmer_param; extern unsigned long flashbase; extern int verbose; extern const char * const flashrom_version; @@ -585,6 +584,7 @@ int min(int a, int b); int max(int a, int b); char *extract_param(char **haystack, char *needle, char *delim); +char *extract_programmer_param(char *needle, char *delim); int check_erased_range(struct flashchip *flash, int start, int len); int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, char *message); int need_erase(uint8_t *have, uint8_t *want, int len, enum write_granularity gran); Index: flashrom-programmer_param_static/it87spi.c =================================================================== --- flashrom-programmer_param_static/it87spi.c (Revision 1070) +++ flashrom-programmer_param_static/it87spi.c (Arbeitskopie) @@ -143,7 +143,7 @@ flashport |= sio_read(port, 0x65); msg_pdbg("Serial flash port 0x%04x\n", flashport); /* Non-default port requested? */ - portpos = extract_param(&programmer_param, "it87spiport", ",:"); + portpos = extract_programmer_param("it87spiport", ",:"); if (portpos && strlen(portpos)) { flashport = strtol(portpos, (char **)NULL, 0); msg_pinfo("Forcing serial flash port 0x%04x\n", Index: flashrom-programmer_param_static/buspirate_spi.c =================================================================== --- flashrom-programmer_param_static/buspirate_spi.c (Revision 1070) +++ flashrom-programmer_param_static/buspirate_spi.c (Arbeitskopie) @@ -101,14 +101,14 @@ char *speed = NULL; int spispeed = 0x7; - dev = extract_param(&programmer_param, "dev", ",:"); + dev = extract_programmer_param("dev", ",:"); if (!dev || !strlen(dev)) { msg_perr("No serial device given. Use flashrom -p " "buspirate_spi:dev=/dev/ttyUSB0\n"); return 1; } - speed = extract_param(&programmer_param, "spispeed", ",:"); + speed = extract_programmer_param("spispeed", ",:"); if (speed) { for (i = 0; spispeeds[i].name; i++) if (!strncasecmp(spispeeds[i].name, speed, Index: flashrom-programmer_param_static/pcidev.c =================================================================== --- flashrom-programmer_param_static/pcidev.c (Revision 1070) +++ flashrom-programmer_param_static/pcidev.c (Arbeitskopie) @@ -94,7 +94,7 @@ /* Filter by vendor and also bb:dd.f (if supplied by the user). */ filter.vendor = vendor_id; - pcidev_bdf = extract_param(&programmer_param, "pci", ","); + pcidev_bdf = extract_programmer_param("pci", ","); if (pcidev_bdf != NULL) { if ((msg = pci_filter_parse_slot(&filter, pcidev_bdf))) { msg_perr("Error: %s\n", msg); Index: flashrom-programmer_param_static/serprog.c =================================================================== --- flashrom-programmer_param_static/serprog.c (Revision 1070) +++ flashrom-programmer_param_static/serprog.c (Arbeitskopie) @@ -306,7 +306,7 @@ int have_device = 0; /* the parameter is either of format "dev=/dev/device:baud" or "ip=ip:port" */ - device = extract_param(&programmer_param, "dev", ","); + device = extract_programmer_param("dev", ","); if (device && strlen(device)) { baudport = strstr(device, ":"); if (baudport) { @@ -333,7 +333,7 @@ } free(device); - device = extract_param(&programmer_param, "ip", ","); + device = extract_programmer_param("ip", ","); if (have_device && device) { msg_perr("Error: Both host and device specified.\n" "Please use either dev= or ip= but not both.\n"); Index: flashrom-programmer_param_static/ft2232_spi.c =================================================================== --- flashrom-programmer_param_static/ft2232_spi.c (Revision 1070) +++ flashrom-programmer_param_static/ft2232_spi.c (Arbeitskopie) @@ -80,7 +80,7 @@ enum ftdi_interface ft2232_interface = INTERFACE_B; char *arg; - arg = extract_param(&programmer_param, "type", ",:"); + arg = extract_programmer_param("type", ",:"); if (arg) { if (!strcasecmp(arg, "2232H")) ft2232_type = FTDI_FT2232H; @@ -93,7 +93,7 @@ } } free(arg); - arg = extract_param(&programmer_param, "port", ",:"); + arg = extract_programmer_param("port", ",:"); if (arg) { switch (toupper(*arg)) { case 'A': Index: flashrom-programmer_param_static/dummyflasher.c =================================================================== --- flashrom-programmer_param_static/dummyflasher.c (Revision 1070) +++ flashrom-programmer_param_static/dummyflasher.c (Arbeitskopie) @@ -37,7 +37,7 @@ msg_pspew("%s\n", __func__); - bustext = extract_param(&programmer_param, "bus", ",:"); + bustext = extract_programmer_param("bus", ",:"); msg_pdbg("Requested buses are: %s\n", bustext ? bustext : "default"); if (!bustext) bustext = strdup("parallel+lpc+fwh+spi"); Index: flashrom-programmer_param_static/chipset_enable.c =================================================================== --- flashrom-programmer_param_static/chipset_enable.c (Revision 1070) +++ flashrom-programmer_param_static/chipset_enable.c (Arbeitskopie) @@ -300,7 +300,7 @@ int max_decode_fwh_decode = 0; int contiguous = 1; - idsel = extract_param(&programmer_param, "fwh_idsel", ",:"); + idsel = extract_programmer_param("fwh_idsel", ",:"); if (idsel && strlen(idsel)) { fwh_conf = (uint32_t)strtoul(idsel, NULL, 0); Index: flashrom-programmer_param_static/flashrom.c =================================================================== --- flashrom-programmer_param_static/flashrom.c (Revision 1070) +++ flashrom-programmer_param_static/flashrom.c (Arbeitskopie) @@ -89,7 +89,7 @@ ; #endif -char *programmer_param = NULL; +static char *programmer_param = NULL; /* Supported buses for the current programmer. */ enum chipbustype buses_supported; @@ -641,6 +641,11 @@ return opt; } +char *extract_programmer_param(char *needle, char *delim) +{ + return extract_param(&programmer_param, needle, delim); +} + /* start is an offset to the base address of the flash chip */ int check_erased_range(struct flashchip *flash, int start, int len) { Index: flashrom-programmer_param_static/internal.c =================================================================== --- flashrom-programmer_param_static/internal.c (Revision 1070) +++ flashrom-programmer_param_static/internal.c (Arbeitskopie) @@ -121,7 +121,7 @@ int force_laptop = 0; char *arg; - arg = extract_param(&programmer_param, "boardenable", ",:"); + arg = extract_programmer_param("boardenable", ",:"); if (arg && !strcmp(arg,"force")) { force_boardenable = 1; } else if (arg && !strlen(arg)) { @@ -135,7 +135,7 @@ } free(arg); - arg = extract_param(&programmer_param, "boardmismatch", ",:"); + arg = extract_programmer_param("boardmismatch", ",:"); if (arg && !strcmp(arg,"force")) { force_boardmismatch = 1; } else if (arg && !strlen(arg)) { @@ -149,7 +149,7 @@ } free(arg); - arg = extract_param(&programmer_param, "laptop", ",:"); + arg = extract_programmer_param("laptop", ",:"); if (arg && !strcmp(arg,"force_I_want_a_brick")) { force_laptop = 1; } else if (arg && !strlen(arg)) { -- http://www.hailfinger.org/

2 4

[commit] r1072 - trunk
by repository service July 8, 2010

July 8, 2010

Author: hailfinger Date: Thu Jul 8 12:13:37 2010 New Revision: 1072 URL: http://flashrom.org/trac/coreboot/changeset/1072 Log: Make programmer_param static by converting all users to extract_programmer_param. Programmer parameters can no longer be separated with a colon, they have to be separated with a comma. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/buspirate_spi.c trunk/chipset_enable.c trunk/dummyflasher.c trunk/flash.h trunk/flashrom.c trunk/ft2232_spi.c trunk/internal.c trunk/it87spi.c trunk/pcidev.c trunk/serprog.c Modified: trunk/buspirate_spi.c ============================================================================== --- trunk/buspirate_spi.c Thu Jul 8 11:32:18 2010 (r1071) +++ trunk/buspirate_spi.c Thu Jul 8 12:13:37 2010 (r1072) @@ -101,14 +101,14 @@ char *speed = NULL; int spispeed = 0x7; - dev = extract_param(&programmer_param, "dev", ",:"); + dev = extract_programmer_param("dev"); if (!dev || !strlen(dev)) { msg_perr("No serial device given. Use flashrom -p " "buspirate_spi:dev=/dev/ttyUSB0\n"); return 1; } - speed = extract_param(&programmer_param, "spispeed", ",:"); + speed = extract_programmer_param("spispeed"); if (speed) { for (i = 0; spispeeds[i].name; i++) if (!strncasecmp(spispeeds[i].name, speed, Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Thu Jul 8 11:32:18 2010 (r1071) +++ trunk/chipset_enable.c Thu Jul 8 12:13:37 2010 (r1072) @@ -300,7 +300,7 @@ int max_decode_fwh_decode = 0; int contiguous = 1; - idsel = extract_param(&programmer_param, "fwh_idsel", ",:"); + idsel = extract_programmer_param("fwh_idsel"); if (idsel && strlen(idsel)) { fwh_conf = (uint32_t)strtoul(idsel, NULL, 0); Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Thu Jul 8 11:32:18 2010 (r1071) +++ trunk/dummyflasher.c Thu Jul 8 12:13:37 2010 (r1072) @@ -37,7 +37,7 @@ msg_pspew("%s\n", __func__); - bustext = extract_param(&programmer_param, "bus", ",:"); + bustext = extract_programmer_param("bus"); msg_pdbg("Requested buses are: %s\n", bustext ? bustext : "default"); if (!bustext) bustext = strdup("parallel+lpc+fwh+spi"); Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Thu Jul 8 11:32:18 2010 (r1071) +++ trunk/flash.h Thu Jul 8 12:13:37 2010 (r1072) @@ -570,7 +570,6 @@ }; extern struct decode_sizes max_rom_decode; extern int programmer_may_write; -extern char *programmer_param; extern unsigned long flashbase; extern int verbose; extern const char * const flashrom_version; @@ -585,6 +584,7 @@ int min(int a, int b); int max(int a, int b); char *extract_param(char **haystack, char *needle, char *delim); +char *extract_programmer_param(char *param_name); int check_erased_range(struct flashchip *flash, int start, int len); int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, char *message); int need_erase(uint8_t *have, uint8_t *want, int len, enum write_granularity gran); Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Thu Jul 8 11:32:18 2010 (r1071) +++ trunk/flashrom.c Thu Jul 8 12:13:37 2010 (r1072) @@ -89,7 +89,7 @@ ; #endif -char *programmer_param = NULL; +static char *programmer_param = NULL; /* Supported buses for the current programmer. */ enum chipbustype buses_supported; @@ -641,6 +641,11 @@ return opt; } +char *extract_programmer_param(char *param_name) +{ + return extract_param(&programmer_param, param_name, ","); +} + /* start is an offset to the base address of the flash chip */ int check_erased_range(struct flashchip *flash, int start, int len) { Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Thu Jul 8 11:32:18 2010 (r1071) +++ trunk/ft2232_spi.c Thu Jul 8 12:13:37 2010 (r1072) @@ -80,7 +80,7 @@ enum ftdi_interface ft2232_interface = INTERFACE_B; char *arg; - arg = extract_param(&programmer_param, "type", ",:"); + arg = extract_programmer_param("type"); if (arg) { if (!strcasecmp(arg, "2232H")) ft2232_type = FTDI_FT2232H; @@ -93,7 +93,7 @@ } } free(arg); - arg = extract_param(&programmer_param, "port", ",:"); + arg = extract_programmer_param("port"); if (arg) { switch (toupper(*arg)) { case 'A': Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Thu Jul 8 11:32:18 2010 (r1071) +++ trunk/internal.c Thu Jul 8 12:13:37 2010 (r1072) @@ -121,7 +121,7 @@ int force_laptop = 0; char *arg; - arg = extract_param(&programmer_param, "boardenable", ",:"); + arg = extract_programmer_param("boardenable"); if (arg && !strcmp(arg,"force")) { force_boardenable = 1; } else if (arg && !strlen(arg)) { @@ -135,7 +135,7 @@ } free(arg); - arg = extract_param(&programmer_param, "boardmismatch", ",:"); + arg = extract_programmer_param("boardmismatch"); if (arg && !strcmp(arg,"force")) { force_boardmismatch = 1; } else if (arg && !strlen(arg)) { @@ -149,7 +149,7 @@ } free(arg); - arg = extract_param(&programmer_param, "laptop", ",:"); + arg = extract_programmer_param("laptop"); if (arg && !strcmp(arg,"force_I_want_a_brick")) { force_laptop = 1; } else if (arg && !strlen(arg)) { Modified: trunk/it87spi.c ============================================================================== --- trunk/it87spi.c Thu Jul 8 11:32:18 2010 (r1071) +++ trunk/it87spi.c Thu Jul 8 12:13:37 2010 (r1072) @@ -143,7 +143,7 @@ flashport |= sio_read(port, 0x65); msg_pdbg("Serial flash port 0x%04x\n", flashport); /* Non-default port requested? */ - portpos = extract_param(&programmer_param, "it87spiport", ",:"); + portpos = extract_programmer_param("it87spiport"); if (portpos && strlen(portpos)) { flashport = strtol(portpos, (char **)NULL, 0); msg_pinfo("Forcing serial flash port 0x%04x\n", Modified: trunk/pcidev.c ============================================================================== --- trunk/pcidev.c Thu Jul 8 11:32:18 2010 (r1071) +++ trunk/pcidev.c Thu Jul 8 12:13:37 2010 (r1072) @@ -94,7 +94,7 @@ /* Filter by vendor and also bb:dd.f (if supplied by the user). */ filter.vendor = vendor_id; - pcidev_bdf = extract_param(&programmer_param, "pci", ","); + pcidev_bdf = extract_programmer_param("pci"); if (pcidev_bdf != NULL) { if ((msg = pci_filter_parse_slot(&filter, pcidev_bdf))) { msg_perr("Error: %s\n", msg); Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Thu Jul 8 11:32:18 2010 (r1071) +++ trunk/serprog.c Thu Jul 8 12:13:37 2010 (r1072) @@ -306,7 +306,7 @@ int have_device = 0; /* the parameter is either of format "dev=/dev/device:baud" or "ip=ip:port" */ - device = extract_param(&programmer_param, "dev", ","); + device = extract_programmer_param("dev"); if (device && strlen(device)) { baudport = strstr(device, ":"); if (baudport) { @@ -333,7 +333,7 @@ } free(device); - device = extract_param(&programmer_param, "ip", ","); + device = extract_programmer_param("ip"); if (have_device && device) { msg_perr("Error: Both host and device specified.\n" "Please use either dev= or ip= but not both.\n");

1 0

Re: [flashrom] [PATCH] Fix ASUS A8N-VM CSM board enable entry
by Carl-Daniel Hailfinger July 8, 2010

July 8, 2010

On 08.07.2010 00:43, Michael Karcher wrote: > r1063 had several issues: The PCI IDs for this board are copy/pasted from > the A8N and plain wrong for this board and the board enable is marked as > tested although it isn't. Finally the board description was slightly > wrong and the URL missing. > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > Your explanation looks good, but I don't own the hardware. Still... Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1