flashrom July 2010

flashrom@flashrom.org

71 participants
273 discussions

Working Motherboard (out of the box): ASUS P6T Deluxe
by Konstantin Matuschek 29 Jul '10

29 Jul '10

Hi :-) I was told to send this email on irc, so here it comes ;-) Yesterday I flashed my Motherboard with Flashrom (first backed up with -r, then flashed with -w), it worked out of the box. Note that the V2 Version of this Board, that is already listed on your support list, is a different board and not just a revision (missing SAS, more SATA, different Audio afaik). Motherboard Name: ASUS P6T Deluxe Motherboard Revision: (unknown, my graphics card hides the text and it's quite difficult to remove it - probably there is only one revision) Product Link: http://www.asus.com/product.aspx?P_ID=vXixf82co6Q5v0BZ&templete=2 Bios flashed from v1904 to v2101 Flashrom Version: 0.9.1 Operating System: Gentoo Linux, Vanilla Kernel 2.6.33 Notes: CONFIG_X86_PAT=y and CONFIG_STRICT_DEVMEM=y The output of flashrom -V, lspci -nnvvvxxx and superiotool -deV are linked below, I also attached a file for each of these. Thanks and greetings, Konstantin flashrom -V http://coreboot.pastebin.com/vsDvLvXA lspci -nnvvvxxx http://coreboot.pastebin.com/A0LJ45g4 superiotool -deV http://coreboot.pastebin.com/XkpiHgYH

2 1

flashrom -V output
by Nicolas Farmer 29 Jul '10

29 Jul '10

flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "Gateway" DMI string system-product-name: "GM5472" DMI string system-version: "910" DMI string baseboard-manufacturer: "ELITEGROUP" DMI string baseboard-product-name: "MCP61PM-AM" DMI string baseboard-version: "1.0 " DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8726 Found chipset "NVIDIA MCP61", enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Guessed flash bus type is LPC Found SMBus device 10de:03eb at 00:01:1 SPI BAR is at 0xfec80000, after clearing low bits BAR is at 0xfec80000 Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI enabled. Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: LPC. Calibrating delay loop... 645M loops per second, 100 myus = 198 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B05T, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B10T, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B20T, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B40T, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN29F010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Intel 82802AC, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Macronix MX25L512, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF003A/B, 384 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF004A/B, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF004C, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF008A, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF008C, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF016C, 2048 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for ST M50FW016, 2048 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for ST M50FW040, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for ST M50FW080, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6eflashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "Gateway" DMI string system-product-name: "GM5472" DMI string system-version: "910" DMI string baseboard-manufacturer: "ELITEGROUP" DMI string baseboard-product-name: "MCP61PM-AM" DMI string baseboard-version: "1.0 " DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8726 Found chipset "NVIDIA MCP61", enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Guessed flash bus type is LPC Found SMBus device 10de:03eb at 00:01:1 SPI BAR is at 0xfec80000, after clearing low bits BAR is at 0xfec80000 Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI enabled. Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: LPC. Calibrating delay loop... 645M loops per second, 100 myus = 198 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B05T, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B10T, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B20T, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B40T, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN29F010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Intel 82802AC, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Macronix MX25L512, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF003A/B, 384 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF004A/B, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF004C, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF008A, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF008C, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF016C, 2048 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for ST M50FW016, 2048 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for ST M50FW040, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for ST M50FW080, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040FA, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W49V002FA, 256 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Winbond W39V080FA, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040FA, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W49V002FA, 256 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Winbond W39V080FA, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified.

2 2

[PATCH] Fix AAI code
by Carl-Daniel Hailfinger 29 Jul '10

29 Jul '10

The AAI code rewrite in r1052 introduced a bug: The writelen of AAI continuation is 3 bytes, but the code incorrectly had 6 bytes there. This causes all AAI writes (except the first two bytes of a chip) to fail. Thanks to den_m for reporting the bug and for testing the fix. Functional change: Fix AAI continuation command write length (was 6, should be 3). Cosmetic change: Change the whitespace of a few #defines in spi.h to have aligned values to improve readability (maybe someone would have spotted the AAI bug if the values had been aligned in the first place). Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> If this patch works for you, please reply-to-all with the following text: Acked-by: Your Name <your@email> Index: flashrom-spi_aai_outsize_fix/spi.h =================================================================== --- flashrom-spi_aai_outsize_fix/spi.h (Revision 1058) +++ flashrom-spi_aai_outsize_fix/spi.h (Arbeitskopie) @@ -108,15 +108,15 @@ /* JEDEC_READ_INSIZE : any length */ /* Write memory byte */ -#define JEDEC_BYTE_PROGRAM 0x02 +#define JEDEC_BYTE_PROGRAM 0x02 #define JEDEC_BYTE_PROGRAM_OUTSIZE 0x05 #define JEDEC_BYTE_PROGRAM_INSIZE 0x00 /* Write AAI word (SST25VF080B) */ -#define JEDEC_AAI_WORD_PROGRAM 0xad -#define JEDEC_AAI_WORD_PROGRAM_OUTSIZE 0x06 -#define JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE 0x06 -#define JEDEC_AAI_WORD_PROGRAM_INSIZE 0x00 +#define JEDEC_AAI_WORD_PROGRAM 0xad +#define JEDEC_AAI_WORD_PROGRAM_OUTSIZE 0x06 +#define JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE 0x03 +#define JEDEC_AAI_WORD_PROGRAM_INSIZE 0x00 /* Error codes */ #define SPI_GENERIC_ERROR -1 -- http://www.hailfinger.org/

2 2

[commit] r1121 - trunk
by repository service 29 Jul '10

29 Jul '10

Author: hailfinger Date: Thu Jul 29 18:32:24 2010 New Revision: 1121 URL: http://flashrom.org/trac/coreboot/changeset/1121 Log: The AAI code rewrite in r1052 introduced a bug: The writelen of AAI continuation is 3 bytes, but the code incorrectly had 6 bytes there. This causes all AAI writes (except the first two bytes of a chip) to fail. Thanks to den_m for reporting the bug and for testing the fix. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/spi.h Modified: trunk/spi.h ============================================================================== --- trunk/spi.h Thu Jul 29 18:24:09 2010 (r1120) +++ trunk/spi.h Thu Jul 29 18:32:24 2010 (r1121) @@ -108,15 +108,15 @@ /* JEDEC_READ_INSIZE : any length */ /* Write memory byte */ -#define JEDEC_BYTE_PROGRAM 0x02 +#define JEDEC_BYTE_PROGRAM 0x02 #define JEDEC_BYTE_PROGRAM_OUTSIZE 0x05 #define JEDEC_BYTE_PROGRAM_INSIZE 0x00 /* Write AAI word (SST25VF080B) */ -#define JEDEC_AAI_WORD_PROGRAM 0xad -#define JEDEC_AAI_WORD_PROGRAM_OUTSIZE 0x06 -#define JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE 0x06 -#define JEDEC_AAI_WORD_PROGRAM_INSIZE 0x00 +#define JEDEC_AAI_WORD_PROGRAM 0xad +#define JEDEC_AAI_WORD_PROGRAM_OUTSIZE 0x06 +#define JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE 0x03 +#define JEDEC_AAI_WORD_PROGRAM_INSIZE 0x00 /* Error codes */ #define SPI_GENERIC_ERROR -1

1 0

[PATCH] 3x speedup for Bus Pirate, violate protocol
by Carl-Daniel Hailfinger 29 Jul '10

29 Jul '10

If we violate the raw SPI communication protocol requirements of the Bus Pirate (namely, waiting for the completion of one command before sending the next one), we can reduce the number of round trips by a factor of 3. The FT2232 chip present in the Bus Pirate has a big enough buffer (at least 128 bytes IIRC) to avoid overflows in the tiny buffer of the Bus Pirate PIC. Untested because I don't own the hardware. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-buspirate_speedup_protocolviolation/buspirate_spi.c =================================================================== --- flashrom-buspirate_speedup_protocolviolation/buspirate_spi.c (Revision 1048) +++ flashrom-buspirate_speedup_protocolviolation/buspirate_spi.c (Arbeitskopie) @@ -266,8 +266,8 @@ if (writecnt > 16 || readcnt > 16 || (readcnt + writecnt) > 16) return SPI_INVALID_LENGTH; - /* +2 is pretty arbitrary. */ - buf = realloc(buf, writecnt + readcnt + 2); + /* 3 bytes extra for CS#, len, CS#. */ + buf = realloc(buf, writecnt + readcnt + 3); if (!buf) { msg_perr("Out of memory!\n"); exit(1); // -1 @@ -275,39 +275,41 @@ /* Assert CS# */ buf[i++] = 0x02; - ret = buspirate_sendrecv(buf, 1, 1); - if (ret) - return SPI_GENERIC_ERROR; - if (buf[0] != 0x01) { - msg_perr("Protocol error while lowering CS#!\n"); - return SPI_GENERIC_ERROR; - } - i = 0; buf[i++] = 0x10 | (writecnt + readcnt - 1); memcpy(buf + i, writearr, writecnt); i += writecnt; memset(buf + i, 0, readcnt); - ret = buspirate_sendrecv(buf, i + readcnt, i + readcnt); - if (ret) + + i += readcnt; + /* De-assert CS# */ + buf[i++] = 0x03; + + ret = buspirate_sendrecv(buf, i, i); + + if (ret) { + msg_perr("Bus Pirate communication error!\n"); return SPI_GENERIC_ERROR; + } + if (buf[0] != 0x01) { + msg_perr("Protocol error while lowering CS#!\n"); + return SPI_GENERIC_ERROR; + } + + if (buf[1] != 0x01) { msg_perr("Protocol error while reading/writing SPI!\n"); return SPI_GENERIC_ERROR; } - memcpy(readarr, buf + i, readcnt); - i = 0; - /* De-assert CS# */ - buf[i++] = 0x03; - ret = buspirate_sendrecv(buf, 1, 1); - if (ret) - return SPI_GENERIC_ERROR; - if (buf[0] != 0x01) { + if (buf[i - 1] != 0x01) { msg_perr("Protocol error while raising CS#!\n"); return SPI_GENERIC_ERROR; } + /* Skip CS#, length, writearr. */ + memcpy(readarr, buf + 2 + writecnt, readcnt); + return ret; } -- http://www.hailfinger.org/

2 5

[commit] r1120 - trunk
by repository service 29 Jul '10

29 Jul '10

Author: hailfinger Date: Thu Jul 29 18:24:09 2010 New Revision: 1120 URL: http://flashrom.org/trac/coreboot/changeset/1120 Log: If we violate the raw SPI communication protocol requirements of the Bus Pirate (namely, waiting for the completion of one command before sending the next one), we can reduce the number of round trips by a factor of 3. The FT2232 chip present in the Bus Pirate has a big enough buffer (at least 128 bytes IIRC) to avoid overflows in the tiny buffer of the Bus Pirate PIC. Thanks to Daniel Flinkmann for sponsoring development of this patch. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Tested-by: Daniel Flinkmann <DFlinkmann(a)gmx.de> Acked-by: Daniel Flinkmann <dflinkmann(a)gmx.de> Modified: trunk/buspirate_spi.c Modified: trunk/buspirate_spi.c ============================================================================== --- trunk/buspirate_spi.c Thu Jul 29 17:54:53 2010 (r1119) +++ trunk/buspirate_spi.c Thu Jul 29 18:24:09 2010 (r1120) @@ -260,8 +260,8 @@ if (writecnt > 16 || readcnt > 16 || (readcnt + writecnt) > 16) return SPI_INVALID_LENGTH; - /* +2 is pretty arbitrary. */ - buf = realloc(buf, writecnt + readcnt + 2); + /* 3 bytes extra for CS#, len, CS#. */ + buf = realloc(buf, writecnt + readcnt + 3); if (!buf) { msg_perr("Out of memory!\n"); exit(1); // -1 @@ -269,39 +269,41 @@ /* Assert CS# */ buf[i++] = 0x02; - ret = buspirate_sendrecv(buf, 1, 1); - if (ret) - return SPI_GENERIC_ERROR; - if (buf[0] != 0x01) { - msg_perr("Protocol error while lowering CS#!\n"); - return SPI_GENERIC_ERROR; - } - i = 0; buf[i++] = 0x10 | (writecnt + readcnt - 1); memcpy(buf + i, writearr, writecnt); i += writecnt; memset(buf + i, 0, readcnt); - ret = buspirate_sendrecv(buf, i + readcnt, i + readcnt); - if (ret) + + i += readcnt; + /* De-assert CS# */ + buf[i++] = 0x03; + + ret = buspirate_sendrecv(buf, i, i); + + if (ret) { + msg_perr("Bus Pirate communication error!\n"); return SPI_GENERIC_ERROR; + } + if (buf[0] != 0x01) { - msg_perr("Protocol error while reading/writing SPI!\n"); + msg_perr("Protocol error while lowering CS#!\n"); return SPI_GENERIC_ERROR; } - memcpy(readarr, buf + i, readcnt); - i = 0; - /* De-assert CS# */ - buf[i++] = 0x03; - ret = buspirate_sendrecv(buf, 1, 1); - if (ret) + if (buf[1] != 0x01) { + msg_perr("Protocol error while reading/writing SPI!\n"); return SPI_GENERIC_ERROR; - if (buf[0] != 0x01) { + } + + if (buf[i - 1] != 0x01) { msg_perr("Protocol error while raising CS#!\n"); return SPI_GENERIC_ERROR; } + /* Skip CS#, length, writearr. */ + memcpy(readarr, buf + 2 + writecnt, readcnt); + return ret; }

1 0

[PATCH] JTAGkey support for ft2232_spi, 4th round
by Jörg Fischer 29 Jul '10

29 Jul '10

Hi, here is the 4th edition of the patch that adds JTAGkey to ft2232spi.c Now "flashrom -L" prints the FTDI2232 based USB programmers too. Signed-off-by: Joerg Fischer <turboj(a)gmx.de> Index: flashrom.8 =================================================================== --- flashrom.8 (Revision 1109) +++ flashrom.8 (Arbeitskopie) @@ -177,11 +177,11 @@ .sp .BR "* atahpt" " (for flash ROMs on Highpoint ATA/RAID controllers)" .sp -.BR "* it87spi" " (for flash ROMs behind an ITE IT87xx Super I/O LPC/SPI\ +.BR "* it87spi" " (for flash ROMs behind an ITE IT87xx Super I/O LPC/SPI \ translation unit)" .sp -.BR "* ft2232_spi" " (for SPI flash ROMs attached to a FT2232H/FT4232H based\ -USB SPI programmer)" +.BR "* ft2232_spi" " (for SPI flash ROMs attached to a FT2232H/FT4232H/JTAGkey \ +based USB SPI programmer)" .sp .BR "* serprog" " (for flash ROMs attached to a programmer speaking serprog)" .sp @@ -351,7 +351,7 @@ syntax where .B model can be any of -.BR 2232H ", or " 4232H +.BR 2232H ", "JTAGkey ", or " 4232H and .B interface can be any of Index: flash.h =================================================================== --- flash.h (Revision 1109) +++ flash.h (Arbeitskopie) @@ -530,12 +530,21 @@ #endif /* ft2232_spi.c */ -#define FTDI_FT2232H 0x6010 -#define FTDI_FT4232H 0x6011 +#if CONFIG_FT2232_SPI == 1 +struct usbdev_status { +uint16_t vendor_id; + uint16_t device_id; + int status; + const char *vendor_name; + const char *device_name; +}; int ft2232_spi_init(void); int ft2232_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int ft2232_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); int ft2232_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len); +extern const struct usbdev_status devs_ft2232spi[]; +void print_supported_usbdevs(const struct usbdev_status *devs); +#endif /* rayer_spi.c */ #if CONFIG_RAYER_SPI == 1 Index: ft2232_spi.c =================================================================== --- ft2232_spi.c (Revision 1109) +++ ft2232_spi.c (Arbeitskopie) @@ -30,6 +30,19 @@ #include "spi.h" #include <ftdi.h> + +#define FTDI_VID 0x0403 +#define FTDI_FT2232H_PID 0x6010 +#define FTDI_FT4232H_PID 0x6011 +#define AMONTEC_JTAGKEY_PID 0xCFF8 + +const struct usbdev_status devs_ft2232spi[] = { + {FTDI_VID, FTDI_FT2232H_PID, OK, "FTDI", "FT2232H"}, + {FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"}, + {FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"}, + {}, +}; + /* * The 'H' chips can run internally at either 12MHz or 60MHz. * The non-H chips can only run at 12MHz. @@ -45,8 +58,43 @@ #define BITMODE_BITBANG_NORMAL 1 #define BITMODE_BITBANG_SPI 2 +/* Set data bits low-byte command: + * value: 0x08 CS=high, DI=low, DO=low, SK=low + * dir: 0x0b CS=output, DI=input, DO=output, SK=output + * + * JTAGkey(2) needs to enable its output via Bit4 / GPIOL0 + * value: 0x18 OE=high, CS=high, DI=low, DO=low, SK=low + * dir: 0x1b OE=output, CS=output, DI=input, DO=output, SK=output + * + */ +static unsigned char cs_bits = 0x08; +static unsigned char pindir = 0x0b; static struct ftdi_context ftdic_context; +static const char *get_ft2232_devicename(int ft2232_vid, int ft2232_type) +{ + int i; + for (i=0; devs_ft2232spi[i].vendor_name != NULL; i ++) { + if ((devs_ft2232spi[i].device_id == ft2232_type) + && (devs_ft2232spi[i].vendor_id == ft2232_vid)) + return devs_ft2232spi[i].device_name; + } + return "unknown device"; +} + +static const char *get_ft2232_vendorname(int ft2232_vid, int ft2232_type) +{ + int i; + for (i=0; devs_ft2232spi[i].vendor_name != NULL; i ++) { + if ((devs_ft2232spi[i].device_id == ft2232_type) + && (devs_ft2232spi[i].vendor_id == ft2232_vid)) + return devs_ft2232spi[i].vendor_name; + } + return "unknown vendor"; +} + + + static int send_buf(struct ftdi_context *ftdic, const unsigned char *buf, int size) { int r; @@ -76,16 +124,23 @@ int f; struct ftdi_context *ftdic = &ftdic_context; unsigned char buf[512]; - int ft2232_type = FTDI_FT4232H; + int ft2232_vid = FTDI_VID; + int ft2232_type = FTDI_FT4232H_PID; enum ftdi_interface ft2232_interface = INTERFACE_B; char *arg; arg = extract_programmer_param("type"); if (arg) { if (!strcasecmp(arg, "2232H")) - ft2232_type = FTDI_FT2232H; + ft2232_type = FTDI_FT2232H_PID; else if (!strcasecmp(arg, "4232H")) - ft2232_type = FTDI_FT4232H; + ft2232_type = FTDI_FT4232H_PID; + else if (!strcasecmp(arg, "jtagkey")) { + ft2232_type = AMONTEC_JTAGKEY_PID; + ft2232_interface = INTERFACE_A; + cs_bits = 0x18; + pindir = 0x1b; + } else { msg_perr("Error: Invalid device type specified.\n"); free(arg); @@ -109,8 +164,9 @@ } } free(arg); - msg_pdbg("Using device type %s ", - (ft2232_type == FTDI_FT2232H) ? "2232H" : "4232H"); + msg_pdbg("Using device type %s %s ", + get_ft2232_vendorname(ft2232_vid,ft2232_type), + get_ft2232_devicename(ft2232_vid,ft2232_type)); msg_pdbg("interface %s\n", (ft2232_interface == INTERFACE_A) ? "A" : "B"); @@ -119,7 +175,7 @@ return EXIT_FAILURE; // TODO } - f = ftdi_usb_open(ftdic, 0x0403, ft2232_type); + f = ftdi_usb_open(ftdic, FTDI_VID, ft2232_type); if (f < 0 && f != -5) { msg_perr("Unable to open FTDI device: %d (%s)\n", f, @@ -178,14 +234,9 @@ return -1; msg_pdbg("Set data bits\n"); - /* Set data bits low-byte command: - * value: 0x08 CS=high, DI=low, DO=low, SK=low - * dir: 0x0b CS=output, DI=input, DO=output, SK=output - */ -#define CS_BIT 0x08 buf[0] = SET_BITS_LOW; - buf[1] = CS_BIT; - buf[2] = 0x0b; + buf[1] = cs_bits; + buf[2] = pindir; if (send_buf(ftdic, buf, 3)) return -1; @@ -230,8 +281,8 @@ */ msg_pspew("Assert CS#\n"); buf[i++] = SET_BITS_LOW; - buf[i++] = 0 & ~CS_BIT; /* assertive */ - buf[i++] = 0x0b; + buf[i++] = 0 & ~cs_bits; /* assertive */ + buf[i++] = pindir; if (writecnt) { buf[i++] = 0x11; @@ -272,8 +323,8 @@ msg_pspew("De-assert CS#\n"); buf[i++] = SET_BITS_LOW; - buf[i++] = CS_BIT; - buf[i++] = 0x0b; + buf[i++] = cs_bits; + buf[i++] = pindir; ret = send_buf(ftdic, buf, i); failed |= ret; if (ret) @@ -293,4 +344,18 @@ return spi_write_chunked(flash, buf, start, len, 256); } +void print_supported_usbdevs(const struct usbdev_status *devs) +{ + int i; + + for (i = 0; devs[i].vendor_name != NULL; i++) { + msg_pinfo("%s %s [%02x:%02x]%s\n", devs[i].vendor_name, + devs[i].device_name, devs[i].vendor_id, + devs[i].device_id, + (devs[i].status == NT) ? " (untested)" : ""); + } +} + + + #endif Index: print.c =================================================================== --- print.c (Revision 1109) +++ print.c (Arbeitskopie) @@ -254,6 +254,15 @@ #if CONFIG_ATAHPT == 1 print_supported_pcidevs(ata_hpt); #endif + +#if CONFIG_FT2232_SPI+CONFIG_DEDIPROG >= 1 + printf("\nSupported USB devices flashrom can use " + "as programmer:\n\n"); +#endif + +#if CONFIG_FT2232_SPI == 1 + print_supported_usbdevs(devs_ft2232spi); +#endif } #if CONFIG_INTERNAL == 1

2 1

[commit] r1119 - trunk
by repository service 29 Jul '10

29 Jul '10

Author: hailfinger Date: Thu Jul 29 17:54:53 2010 New Revision: 1119 URL: http://flashrom.org/trac/coreboot/changeset/1119 Log: Add support for the Amontec JTAGkey2, see http://www.amontec.com/jtagkey2.shtml http://www.amontec.com/jtagkey.shtml This FTDI 2232H variant has an additional output enable, which will be set to its "on" (L) when CS is pulled low. But it lacks a power supply and you need an external 3.3V source. The attached patch adds "jtagkey" as "type" parameter for ft2232_spi. It should work with all JTAGkeys (JTAGkey, JTAGkey-tiny and JTAGkey2) but I only have a JTAGkey2 here for testing. Add all FT2232H/FT4232H based programmers to the list printed with flashrom -L Signed-off-by: Jörg Fischer <turboj(a)gmx.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashrom.8 trunk/ft2232_spi.c trunk/print.c trunk/programmer.h Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Thu Jul 29 17:00:40 2010 (r1118) +++ trunk/flashrom.8 Thu Jul 29 17:54:53 2010 (r1119) @@ -177,11 +177,11 @@ .sp .BR "* atahpt" " (for flash ROMs on Highpoint ATA/RAID controllers)" .sp -.BR "* it87spi" " (for flash ROMs behind an ITE IT87xx Super I/O LPC/SPI\ +.BR "* it87spi" " (for flash ROMs behind an ITE IT87xx Super I/O LPC/SPI \ translation unit)" .sp -.BR "* ft2232_spi" " (for SPI flash ROMs attached to a FT2232H/FT4232H based\ -USB SPI programmer)" +.BR "* ft2232_spi" " (for SPI flash ROMs attached to a FT2232H/FT4232H/JTAGkey \ +based USB SPI programmer)" .sp .BR "* serprog" " (for flash ROMs attached to a programmer speaking serprog)" .sp @@ -351,7 +351,7 @@ syntax where .B model can be any of -.BR 2232H ", or " 4232H +.BR 2232H ", "JTAGkey ", or " 4232H and .B interface can be any of Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Thu Jul 29 17:00:40 2010 (r1118) +++ trunk/ft2232_spi.c Thu Jul 29 17:54:53 2010 (r1119) @@ -31,6 +31,19 @@ #include "spi.h" #include <ftdi.h> + +#define FTDI_VID 0x0403 +#define FTDI_FT2232H_PID 0x6010 +#define FTDI_FT4232H_PID 0x6011 +#define AMONTEC_JTAGKEY_PID 0xCFF8 + +const struct usbdev_status devs_ft2232spi[] = { + {FTDI_VID, FTDI_FT2232H_PID, OK, "FTDI", "FT2232H"}, + {FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"}, + {FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"}, + {}, +}; + /* * The 'H' chips can run internally at either 12MHz or 60MHz. * The non-H chips can only run at 12MHz. @@ -46,8 +59,43 @@ #define BITMODE_BITBANG_NORMAL 1 #define BITMODE_BITBANG_SPI 2 +/* Set data bits low-byte command: + * value: 0x08 CS=high, DI=low, DO=low, SK=low + * dir: 0x0b CS=output, DI=input, DO=output, SK=output + * + * JTAGkey(2) needs to enable its output via Bit4 / GPIOL0 + * value: 0x18 OE=high, CS=high, DI=low, DO=low, SK=low + * dir: 0x1b OE=output, CS=output, DI=input, DO=output, SK=output + * + */ +static unsigned char cs_bits = 0x08; +static unsigned char pindir = 0x0b; static struct ftdi_context ftdic_context; +static const char *get_ft2232_devicename(int ft2232_vid, int ft2232_type) +{ + int i; + for (i=0; devs_ft2232spi[i].vendor_name != NULL; i ++) { + if ((devs_ft2232spi[i].device_id == ft2232_type) + && (devs_ft2232spi[i].vendor_id == ft2232_vid)) + return devs_ft2232spi[i].device_name; + } + return "unknown device"; +} + +static const char *get_ft2232_vendorname(int ft2232_vid, int ft2232_type) +{ + int i; + for (i=0; devs_ft2232spi[i].vendor_name != NULL; i ++) { + if ((devs_ft2232spi[i].device_id == ft2232_type) + && (devs_ft2232spi[i].vendor_id == ft2232_vid)) + return devs_ft2232spi[i].vendor_name; + } + return "unknown vendor"; +} + + + static int send_buf(struct ftdi_context *ftdic, const unsigned char *buf, int size) { int r; @@ -77,16 +125,23 @@ int f; struct ftdi_context *ftdic = &ftdic_context; unsigned char buf[512]; - int ft2232_type = FTDI_FT4232H; + int ft2232_vid = FTDI_VID; + int ft2232_type = FTDI_FT4232H_PID; enum ftdi_interface ft2232_interface = INTERFACE_B; char *arg; arg = extract_programmer_param("type"); if (arg) { if (!strcasecmp(arg, "2232H")) - ft2232_type = FTDI_FT2232H; + ft2232_type = FTDI_FT2232H_PID; else if (!strcasecmp(arg, "4232H")) - ft2232_type = FTDI_FT4232H; + ft2232_type = FTDI_FT4232H_PID; + else if (!strcasecmp(arg, "jtagkey")) { + ft2232_type = AMONTEC_JTAGKEY_PID; + ft2232_interface = INTERFACE_A; + cs_bits = 0x18; + pindir = 0x1b; + } else { msg_perr("Error: Invalid device type specified.\n"); free(arg); @@ -110,8 +165,9 @@ } } free(arg); - msg_pdbg("Using device type %s ", - (ft2232_type == FTDI_FT2232H) ? "2232H" : "4232H"); + msg_pdbg("Using device type %s %s ", + get_ft2232_vendorname(ft2232_vid,ft2232_type), + get_ft2232_devicename(ft2232_vid,ft2232_type)); msg_pdbg("interface %s\n", (ft2232_interface == INTERFACE_A) ? "A" : "B"); @@ -120,7 +176,7 @@ return EXIT_FAILURE; // TODO } - f = ftdi_usb_open(ftdic, 0x0403, ft2232_type); + f = ftdi_usb_open(ftdic, FTDI_VID, ft2232_type); if (f < 0 && f != -5) { msg_perr("Unable to open FTDI device: %d (%s)\n", f, @@ -179,14 +235,9 @@ return -1; msg_pdbg("Set data bits\n"); - /* Set data bits low-byte command: - * value: 0x08 CS=high, DI=low, DO=low, SK=low - * dir: 0x0b CS=output, DI=input, DO=output, SK=output - */ -#define CS_BIT 0x08 buf[0] = SET_BITS_LOW; - buf[1] = CS_BIT; - buf[2] = 0x0b; + buf[1] = cs_bits; + buf[2] = pindir; if (send_buf(ftdic, buf, 3)) return -1; @@ -231,8 +282,8 @@ */ msg_pspew("Assert CS#\n"); buf[i++] = SET_BITS_LOW; - buf[i++] = 0 & ~CS_BIT; /* assertive */ - buf[i++] = 0x0b; + buf[i++] = 0 & ~cs_bits; /* assertive */ + buf[i++] = pindir; if (writecnt) { buf[i++] = 0x11; @@ -273,8 +324,8 @@ msg_pspew("De-assert CS#\n"); buf[i++] = SET_BITS_LOW; - buf[i++] = CS_BIT; - buf[i++] = 0x0b; + buf[i++] = cs_bits; + buf[i++] = pindir; ret = send_buf(ftdic, buf, i); failed |= ret; if (ret) @@ -294,4 +345,18 @@ return spi_write_chunked(flash, buf, start, len, 256); } +void print_supported_usbdevs(const struct usbdev_status *devs) +{ + int i; + + for (i = 0; devs[i].vendor_name != NULL; i++) { + msg_pinfo("%s %s [%02x:%02x]%s\n", devs[i].vendor_name, + devs[i].device_name, devs[i].vendor_id, + devs[i].device_id, + (devs[i].status == NT) ? " (untested)" : ""); + } +} + + + #endif Modified: trunk/print.c ============================================================================== --- trunk/print.c Thu Jul 29 17:00:40 2010 (r1118) +++ trunk/print.c Thu Jul 29 17:54:53 2010 (r1119) @@ -255,6 +255,15 @@ #if CONFIG_ATAHPT == 1 print_supported_pcidevs(ata_hpt); #endif + +#if CONFIG_FT2232_SPI+CONFIG_DEDIPROG >= 1 + printf("\nSupported USB devices flashrom can use " + "as programmer:\n\n"); +#endif + +#if CONFIG_FT2232_SPI == 1 + print_supported_usbdevs(devs_ft2232spi); +#endif } #if CONFIG_INTERNAL == 1 Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Thu Jul 29 17:00:40 2010 (r1118) +++ trunk/programmer.h Thu Jul 29 17:54:53 2010 (r1119) @@ -397,12 +397,21 @@ #endif /* ft2232_spi.c */ -#define FTDI_FT2232H 0x6010 -#define FTDI_FT4232H 0x6011 +#if CONFIG_FT2232_SPI == 1 +struct usbdev_status { +uint16_t vendor_id; + uint16_t device_id; + int status; + const char *vendor_name; + const char *device_name; +}; int ft2232_spi_init(void); int ft2232_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int ft2232_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); int ft2232_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len); +extern const struct usbdev_status devs_ft2232spi[]; +void print_supported_usbdevs(const struct usbdev_status *devs); +#endif /* rayer_spi.c */ #if CONFIG_RAYER_SPI == 1

1 0

[commit] r1118 - trunk
by repository service 29 Jul '10

29 Jul '10

Author: hailfinger Date: Thu Jul 29 17:00:40 2010 New Revision: 1118 URL: http://flashrom.org/trac/coreboot/changeset/1118 Log: Add support for AMIC A25L512, A25L010, A25L020, A25L040, A25L080, A25L016, A25L032 AMIC A25LQ032 (quad-rate read) Signed-off-by: Dan Lenski <dlenski(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Thu Jul 29 16:41:46 2010 (r1117) +++ trunk/flashchips.c Thu Jul 29 17:00:40 2010 (r1118) @@ -637,6 +637,250 @@ { .vendor = "AMIC", + .name = "A25L512", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L512, + .total_size = 64, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 16 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 1 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 64 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", + .name = "A25L010", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L010, + .total_size = 128, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 32 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 2 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 128 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", + .name = "A25L020", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L020, + .total_size = 256, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 64 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 4 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 256 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", + .name = "A25L040", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L040, + .total_size = 512, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 128 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 8 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 512 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", + .name = "A25L080", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L080, + .total_size = 1024, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 256 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 16 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 1024 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", + .name = "A25L016", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L016, + .total_size = 2048, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 512 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 32 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 2048 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", + .name = "A25L032", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L032, + .total_size = 4096, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 1024 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 64 } }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 64 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 4096 * 1024, 1 } }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 4096 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = NULL, /* Two status reg bytes (read with 0x35 and 0x05) */ + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", + .name = "A25LQ032", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25LQ032, + .total_size = 4096, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 1024 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 64 } }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 64 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 4096 * 1024, 1 } }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 4096 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = NULL, /* Two status reg bytes (read with 0x35 and 0x05) */ + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", .name = "A29002B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMIC_ID_NOPREFIX, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Thu Jul 29 16:41:46 2010 (r1117) +++ trunk/flashchips.h Thu Jul 29 17:00:40 2010 (r1118) @@ -88,6 +88,14 @@ #define AMIC_A25L80P 0x2014 /* Seems that no A25L80PT exists */ #define AMIC_A25L16PT 0x2025 #define AMIC_A25L16PU 0x2015 +#define AMIC_A25L512 0x3010 +#define AMIC_A25L010 0x3011 +#define AMIC_A25L020 0x3012 +#define AMIC_A25L040 0x3013 +#define AMIC_A25L080 0x3014 +#define AMIC_A25L016 0x3015 +#define AMIC_A25L032 0x3016 +#define AMIC_A25LQ032 0x4016 #define AMIC_A29002B 0x0d #define AMIC_A29002T 0x8C /* Same as A290021T */ #define AMIC_A29040B 0x86

1 0

[PATCH] Enable gfxnvidia, disallow write/erase
by Carl-Daniel Hailfinger 29 Jul '10

29 Jul '10

Compile gfxnvidia by default, but disallow write/erase. Needs [PATCH] Allow programmers to disallow writes Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-gfxnvidia_enable_without_write/gfxnvidia.c =================================================================== --- flashrom-gfxnvidia_enable_without_write/gfxnvidia.c (Revision 1065) +++ flashrom-gfxnvidia_enable_without_write/gfxnvidia.c (Arbeitskopie) @@ -75,6 +75,9 @@ buses_supported = CHIP_BUSTYPE_PARALLEL; + /* Write/erase doesn't work. */ + programmer_may_write = 0; + return 0; } Index: flashrom-gfxnvidia_enable_without_write/Makefile =================================================================== --- flashrom-gfxnvidia_enable_without_write/Makefile (Revision 1065) +++ flashrom-gfxnvidia_enable_without_write/Makefile (Arbeitskopie) @@ -113,8 +113,8 @@ # Always enable 3Com NICs for now. CONFIG_NIC3COM ?= yes -# Disable NVIDIA graphics cards for now, write/erase don't work properly. -CONFIG_GFXNVIDIA ?= no +# Enable NVIDIA graphics cards. Note: write/erase don't work properly. +CONFIG_GFXNVIDIA ?= yes # Always enable SiI SATA controllers for now. CONFIG_SATASII ?= yes -- http://www.hailfinger.org/

2 2

← Newer
1
...
7
8
9
10
11
12
13
...
28
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom July 2010