flashrom January 2010

flashrom@flashrom.org

49 participants
216 discussions

Re: [flashrom] [commit] r845 - trunk
by Luc Verhaegen 09 Jan '10

09 Jan '10

On Sat, Jan 09, 2010 at 06:36:07PM +0100, svn(a)flashrom.org wrote: > Author: mkarcher > Date: 2010-01-09 18:36:06 +0100 (Sat, 09 Jan 2010) > New Revision: 845 > > Modified: > trunk/board_enable.c > Log: > Enable flashing on MSI 651M-L. > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > Acked-by: Sergey Lichack <shadowpilot34(a)gmail.com> I seem unable to find the prerequisites for supporting this board on the ml, lspci and superio. The superio one is very important, as i need to know which superio this is for the upcoming superio changes. I expect it to be a w83697(T)HF, as so far only those required this memw enable (like the it8705 is the only one require something rather similar). But cool, we have our first sis gpio poker. > +/** > + * Enable some GPIO pin on SiS southbridge. > + * Suited for MSI 651M-L: SiS651 / SiS962 > + */ > +static int board_msi_651ml(const char *name) > +{ > + struct pci_dev *dev; > + uint16_t base; > + uint16_t temp; > + > + dev = pci_dev_find(0x1039, 0x0962); > + if (!dev) { > + fprintf(stderr, "Expected south bridge not found\n"); > + return 1; > + } > + > + /* Registers 68 and 64 seem like bitmaps */ > + base = pci_read_word(dev, 0x74); > + temp = INW(base + 0x68); > + temp &= ~(1 << 0); /* Make pin output? */ > + printf_debug("changed to %04x\n",temp); Where do you end up writing this bit? > + > + temp = INW(base + 0x64); > + temp |= (1 << 0); /* Raise output? */ > + OUTW(temp, base + 0x64); > + > + w836xx_memw_enable(0x2E); > + > + return 0; > +} > + One or two more of these routines, and we might make a first stab at a general sis gpio routine. Luc Verhaegen.

2 1

Addendum: Big problem after flash of SST SST25VF016B on HP Compaq 615 (also with flashrom v0.9.1-r844)
by Parallix 09 Jan '10

09 Jan '10

I've the same problem I posted on Sat Jan 9 18:28:53 CET 2010 with flashrom v0.9.1-r844 I kindly ask for your help. Best, Parallix

1 0

Board Enable for MSI 651M-L
by Michael Karcher 09 Jan '10

09 Jan '10

Hello, This patch should enable flash read/write on the MSI 651M-L. Please test. DuratarskeyK: This is your board. Please report success or failure (with output of "flashrom -V") to the mailing list. Regards, Michael Karcher diff --git a/board_enable.c b/board_enable.c index 39cdadc..2d3b9a1 100644 --- a/board_enable.c +++ b/board_enable.c @@ -947,6 +947,35 @@ static int board_soyo_sy_7vca(const char *name) return 0; } +/** + * Enable some GPIO pin on SiS southbridge. + * Suited for MSI 651M-L: SiS651 / SiS962 + */ +static int board_msi_651ml(const char *name) +{ + struct pci_dev *dev; + uint16_t base; + uint16_t temp; + + dev = pci_dev_find(0x1039, 0x0962); + if (!dev) { + fprintf(stderr, "Expected south bridge not found\n"); + return 1; + } + + /* Registers 68 and 64 seem like bitmaps */ + base = pci_read_word(dev, 0x74); + temp = INW(base + 0x68); + temp &= ~(1 << 0); /* Make pin output? */ + OUTW(temp, base + 0x68); + + temp = INW(base + 0x64); + temp |= (1 << 0); /* Raise output? */ + OUTW(temp, base + 0x64); + + return 0; +} + static int it8705f_write_enable(uint8_t port, const char *name) { enter_conf_mode_ite(port); @@ -1215,6 +1244,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, NULL, NULL, "MSI", "MS-6590 (KT4 Ultra)",board_msi_kt4v}, {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)",w83627thf_gpio4_4_raise_2e}, {0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, "MSI", "MS-6712 (KT4V)", board_msi_kt4v}, + {0x1039, 0x7012, 0x1462, 0x0050, 0x1039, 0x6325, 0x1462, 0x0058, NULL, NULL, "MSI", "MS-7005 (651M-L)", board_msi_651ml}, {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, "MSI", "MS-7046", intel_ich_gpio19_raise}, {0x10DE, 0x005E, 0x1462, 0x7135, 0x10DE, 0x0050, 0x1462, 0x7135, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", w83627thf_gpio4_4_raise_4e}, {0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, "MSI", "K8N Neo4-F", nvidia_mcp_gpio2_raise},

2 2

Re: [flashrom] Board Enable for MSI 651M-L
by Michael Karcher 09 Jan '10

09 Jan '10

> Acked-by: Sergey Lichack <shadowpilot34(a)gmail.com> > > 2010/1/9 Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > That patch is wrong. I missed a superio enable. > > Please use the included one (also at > http://dpaste.com/142499/) instead. Thanks for your ack. Committed as revision 845. Regards, Michael Karcher

1 0

[commit] r845 - trunk
by svn＠flashrom.org 09 Jan '10

09 Jan '10

Author: mkarcher Date: 2010-01-09 18:36:06 +0100 (Sat, 09 Jan 2010) New Revision: 845 Modified: trunk/board_enable.c Log: Enable flashing on MSI 651M-L. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Sergey Lichack <shadowpilot34(a)gmail.com> Modified: trunk/board_enable.c =================================================================== --- trunk/board_enable.c 2010-01-09 14:18:01 UTC (rev 844) +++ trunk/board_enable.c 2010-01-09 17:36:06 UTC (rev 845) @@ -947,6 +947,37 @@ return 0; } +/** + * Enable some GPIO pin on SiS southbridge. + * Suited for MSI 651M-L: SiS651 / SiS962 + */ +static int board_msi_651ml(const char *name) +{ + struct pci_dev *dev; + uint16_t base; + uint16_t temp; + + dev = pci_dev_find(0x1039, 0x0962); + if (!dev) { + fprintf(stderr, "Expected south bridge not found\n"); + return 1; + } + + /* Registers 68 and 64 seem like bitmaps */ + base = pci_read_word(dev, 0x74); + temp = INW(base + 0x68); + temp &= ~(1 << 0); /* Make pin output? */ + printf_debug("changed to %04x\n",temp); + + temp = INW(base + 0x64); + temp |= (1 << 0); /* Raise output? */ + OUTW(temp, base + 0x64); + + w836xx_memw_enable(0x2E); + + return 0; +} + static int it8705f_write_enable(uint8_t port, const char *name) { enter_conf_mode_ite(port); @@ -1215,6 +1246,7 @@ {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, NULL, NULL, "MSI", "MS-6590 (KT4 Ultra)",board_msi_kt4v}, {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)",w83627thf_gpio4_4_raise_2e}, {0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, "MSI", "MS-6712 (KT4V)", board_msi_kt4v}, + {0x1039, 0x7012, 0x1462, 0x0050, 0x1039, 0x6325, 0x1462, 0x0058, NULL, NULL, "MSI", "MS-7005 (651M-L)", board_msi_651ml}, {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, "MSI", "MS-7046", intel_ich_gpio19_raise}, {0x10DE, 0x005E, 0x1462, 0x7135, 0x10DE, 0x0050, 0x1462, 0x7135, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", w83627thf_gpio4_4_raise_4e}, {0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, "MSI", "K8N Neo4-F", nvidia_mcp_gpio2_raise},

1 0

Samsung R45 laptop - SAMSUNG SR45P (I guess)
by Jon Shadow 09 Jan '10

09 Jan '10

Here's the info about my laptop flashrom -V http://paste.pocoo.org/show/163671/ lspci -nnvvvxxx http://paste.pocoo.org/show/163672/ dmidecode http://paste.pocoo.org/show/163675/ superiotool -deV http://paste.pocoo.org/show/163676/ -- Sergeyli

1 0

[PATCH] Fix Makefile dependencies if FT2232SPI is not selected
by Carl-Daniel Hailfinger 09 Jan '10

09 Jan '10

Fix Makefile dependencies if FT2232SPI is not selected. .features was always regenerated in that case, triggering whole-project recompiles even if nothing changed. If you want to test, run make distclean make CONFIG_INTERNAL=no CONFIG_SERPROG=no CONFIG_SATASII=no CONFIG_DRKAISER=no CONFIG_NIC3COM=no CONFIG_BUSPIRATESPI=no CONFIG_FT2232SPI=no CONFIG_DUMMY=yes make CONFIG_INTERNAL=no CONFIG_SERPROG=no CONFIG_SATASII=no CONFIG_DRKAISER=no CONFIG_NIC3COM=no CONFIG_BUSPIRATESPI=no CONFIG_FT2232SPI=no CONFIG_DUMMY=yes Without the patch, you get a full recompile on the second make call. With the patch, make notices that nothing changed and thus does nothing. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-ft2232_makefile_no_recompile/Makefile =================================================================== --- flashrom-ft2232_makefile_no_recompile/Makefile (Revision 841) +++ flashrom-ft2232_makefile_no_recompile/Makefile (Arbeitskopie) @@ -136,8 +136,8 @@ NEED_PCI := yes endif +ifeq ($(CONFIG_FT2232SPI), yes) FTDILIBS := $(shell pkg-config --libs libftdi 2>/dev/null || printf "%s" "-lftdi -lusb") -ifeq ($(CONFIG_FT2232SPI), yes) # This is a totally ugly hack. FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'FT2232_SPI_SUPPORT=1'") FEATURE_LIBS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)") @@ -280,7 +280,8 @@ @rm -f .featuretest.c .featuretest else features: compiler - @echo "FEATURES := yes" > .features + @echo "FEATURES := yes" > .features.tmp + @$(DIFF) -q .features.tmp .features >/dev/null 2>&1 && rm .features.tmp || mv .features.tmp .features endif install: $(PROGRAM) -- Developer quote of the year: "We are juggling too many chainsaws and flaming arrows and tigers."

2 2

[commit] r844 - trunk
by svn＠flashrom.org 09 Jan '10

09 Jan '10

Author: hailfinger Date: 2010-01-09 15:18:01 +0100 (Sat, 09 Jan 2010) New Revision: 844 Modified: trunk/Makefile Log: Fix Makefile dependencies if FT2232SPI is not selected. .features was always regenerated in that case, triggering whole-project recompiles even if nothing changed. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Modified: trunk/Makefile =================================================================== --- trunk/Makefile 2010-01-09 05:30:14 UTC (rev 843) +++ trunk/Makefile 2010-01-09 14:18:01 UTC (rev 844) @@ -136,8 +136,8 @@ NEED_PCI := yes endif +ifeq ($(CONFIG_FT2232SPI), yes) FTDILIBS := $(shell pkg-config --libs libftdi 2>/dev/null || printf "%s" "-lftdi -lusb") -ifeq ($(CONFIG_FT2232SPI), yes) # This is a totally ugly hack. FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'FT2232_SPI_SUPPORT=1'") FEATURE_LIBS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)") @@ -280,7 +280,8 @@ @rm -f .featuretest.c .featuretest else features: compiler - @echo "FEATURES := yes" > .features + @echo "FEATURES := yes" > .features.tmp + @$(DIFF) -q .features.tmp .features >/dev/null 2>&1 && rm .features.tmp || mv .features.tmp .features endif install: $(PROGRAM)

1 0

hp dx7500 probe report
by Steven Zakulec 09 Jan '10

09 Jan '10

Hi, here is the information for the dx7500 model. The bios link is here<http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?la…> .

1 0

hp xw4400 probe report
by Steven Zakulec 09 Jan '10

09 Jan '10

Hi, here is the information from flashrom -V, lspci -nnvvvxxx, superiotool -deV. BIOS link is here<http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?la…> . Not sure if it matters at all, but this machine is also supported under RHEL 3 & 5 (neither of which I am running). I have attached the output from the other commands.

1 0

← Newer
1
...
14
15
16
17
18
19
20
21
22
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom January 2010