Author: snelson
Date: 2010-01-10 00:56:41 +0100 (Sun, 10 Jan 2010)
New Revision: 851
Modified:
trunk/buspirate_spi.c
Log:
Convert all messages in buspirate_spi.c to the new message infrastructure.
Signed-off-by: Sean Nelson <audiohacked(a)gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Modified: trunk/buspirate_spi.c
===================================================================
--- trunk/buspirate_spi.c 2010-01-09 23:54:05 UTC (rev 850)
+++ trunk/buspirate_spi.c 2010-01-09 23:56:41 UTC (rev 851)
@@ -25,17 +25,6 @@
#include "flash.h"
#include "spi.h"
-/* Change this to #define if you want lowlevel debugging of commands
- * sent to the Bus Pirate.
- */
-#undef COMM_DEBUG
-
-#ifdef COMM_DEBUG
-#define msg_comm_debug printf_debug
-#else
-#define msg_comm_debug(...) do {} while (0)
-#endif
-
/* Change this to #define if you want to test without a serial implementation */
#undef FAKE_COMMUNICATION
@@ -58,14 +47,14 @@
{
int i, ret = 0;
- msg_comm_debug("%s: write %i, read %i ", __func__, writecnt, readcnt);
+ msg_pspew("%s: write %i, read %i ", __func__, writecnt, readcnt);
if (!writecnt && !readcnt) {
- fprintf(stderr, "Zero length command!\n");
+ msg_perr("Zero length command!\n");
return 1;
}
- msg_comm_debug("Sending");
+ msg_pspew("Sending");
for (i = 0; i < writecnt; i++)
- msg_comm_debug(" 0x%02x", buf[i]);
+ msg_pspew(" 0x%02x", buf[i]);
#ifdef FAKE_COMMUNICATION
/* Placate the caller for now. */
if (readcnt) {
@@ -83,10 +72,10 @@
if (ret)
return ret;
#endif
- msg_comm_debug(", receiving");
+ msg_pspew(", receiving");
for (i = 0; i < readcnt; i++)
- msg_comm_debug(" 0x%02x", buf[i]);
- msg_comm_debug("\n");
+ msg_pspew(" 0x%02x", buf[i]);
+ msg_pspew("\n");
return 0;
}
@@ -119,13 +108,13 @@
dev = extract_param(&programmer_param, "dev=", ",:");
speed = extract_param(&programmer_param, "spispeed=", ",:");
if (strlen(programmer_param))
- fprintf(stderr, "Unhandled programmer parameters: %s\n",
+ msg_perr("Unhandled programmer parameters: %s\n",
programmer_param);
free(programmer_param);
programmer_param = NULL;
}
if (!dev) {
- fprintf(stderr, "No serial device given. Use flashrom -p "
+ msg_perr("No serial device given. Use flashrom -p "
"buspiratespi:dev=/dev/ttyUSB0\n");
return 1;
}
@@ -137,10 +126,10 @@
break;
}
if (!spispeeds[i].name)
- fprintf(stderr, "Invalid SPI speed, using default.\n");
+ msg_perr("Invalid SPI speed, using default.\n");
}
/* This works because speeds numbering starts at 0 and is contiguous. */
- printf_debug("SPI speed is %sHz\n", spispeeds[spispeed].name);
+ msg_pdbg("SPI speed is %sHz\n", spispeeds[spispeed].name);
ret = buspirate_serialport_setup(dev);
if (ret)
@@ -163,12 +152,12 @@
if (ret)
return ret;
if (memcmp(buf, "BBIO", 4)) {
- fprintf(stderr, "Entering raw bitbang mode failed!\n");
+ msg_perr("Entering raw bitbang mode failed!\n");
return 1;
}
- printf_debug("Raw bitbang mode version %c\n", buf[4]);
+ msg_pdbg("Raw bitbang mode version %c\n", buf[4]);
if (buf[4] != '1') {
- fprintf(stderr, "Can't handle raw bitbang mode version %c!\n",
+ msg_perr("Can't handle raw bitbang mode version %c!\n",
buf[4]);
return 1;
}
@@ -176,12 +165,12 @@
buf[0] = 0x01;
ret = buspirate_sendrecv(buf, 1, 4);
if (memcmp(buf, "SPI", 3)) {
- fprintf(stderr, "Entering raw SPI mode failed!\n");
+ msg_perr("Entering raw SPI mode failed!\n");
return 1;
}
- printf_debug("Raw SPI mode version %c\n", buf[3]);
+ msg_pdbg("Raw SPI mode version %c\n", buf[3]);
if (buf[3] != '1') {
- fprintf(stderr, "Can't handle raw SPI mode version %c!\n",
+ msg_perr("Can't handle raw SPI mode version %c!\n",
buf[3]);
return 1;
}
@@ -192,7 +181,7 @@
if (ret)
return 1;
if (buf[0] != 0x01) {
- fprintf(stderr, "Protocol error while setting power/CS/AUX!\n");
+ msg_perr("Protocol error while setting power/CS/AUX!\n");
return 1;
}
@@ -202,7 +191,7 @@
if (ret)
return 1;
if (buf[0] != 0x01) {
- fprintf(stderr, "Protocol error while setting SPI speed!\n");
+ msg_perr("Protocol error while setting SPI speed!\n");
return 1;
}
@@ -212,7 +201,7 @@
if (ret)
return 1;
if (buf[0] != 0x01) {
- fprintf(stderr, "Protocol error while setting SPI config!\n");
+ msg_perr("Protocol error while setting SPI config!\n");
return 1;
}
@@ -222,7 +211,7 @@
if (ret)
return 1;
if (buf[0] != 0x01) {
- fprintf(stderr, "Protocol error while raising CS#!\n");
+ msg_perr("Protocol error while raising CS#!\n");
return 1;
}
@@ -243,12 +232,12 @@
if (ret)
return ret;
if (memcmp(buf, "BBIO", 4)) {
- fprintf(stderr, "Entering raw bitbang mode failed!\n");
+ msg_perr("Entering raw bitbang mode failed!\n");
return 1;
}
- printf_debug("Raw bitbang mode version %c\n", buf[4]);
+ msg_pdbg("Raw bitbang mode version %c\n", buf[4]);
if (buf[4] != '1') {
- fprintf(stderr, "Can't handle raw bitbang mode version %c!\n",
+ msg_perr("Can't handle raw bitbang mode version %c!\n",
buf[4]);
return 1;
}
@@ -262,7 +251,7 @@
ret = serialport_shutdown();
if (ret)
return ret;
- printf_debug("Bus Pirate shutdown completed.\n");
+ msg_pdbg("Bus Pirate shutdown completed.\n");
return 0;
}
@@ -279,7 +268,7 @@
/* +2 is pretty arbitrary. */
buf = realloc(buf, writecnt + readcnt + 2);
if (!buf) {
- fprintf(stderr, "Out of memory!\n");
+ msg_perr("Out of memory!\n");
exit(1); // -1
}
@@ -289,7 +278,7 @@
if (ret)
return SPI_GENERIC_ERROR;
if (buf[0] != 0x01) {
- fprintf(stderr, "Protocol error while lowering CS#!\n");
+ msg_perr("Protocol error while lowering CS#!\n");
return SPI_GENERIC_ERROR;
}
@@ -302,7 +291,7 @@
if (ret)
return SPI_GENERIC_ERROR;
if (buf[0] != 0x01) {
- fprintf(stderr, "Protocol error while reading/writing SPI!\n");
+ msg_perr("Protocol error while reading/writing SPI!\n");
return SPI_GENERIC_ERROR;
}
memcpy(readarr, buf + i, readcnt);
@@ -314,7 +303,7 @@
if (ret)
return SPI_GENERIC_ERROR;
if (buf[0] != 0x01) {
- fprintf(stderr, "Protocol error while raising CS#!\n");
+ msg_perr("Protocol error while raising CS#!\n");
return SPI_GENERIC_ERROR;
}