flashrom August 2009

flashrom@flashrom.org

28 participants
124 discussions

Success: Gigabyte GA-MA78GPM-DS2H
by Erik Haugen Bakke 18 Aug '09

18 Aug '09

Hi, all. Just wanted to confirm that the current SVN version of flashrom works on a Gigabyte GA-MA78GPM-DS2H board. The last time I tried this was about 2 months ago and the flashing failed back then, so this support would have added some time since then. The board was delivered with BIOS revision F3, and I have successfully flashed it with F4 and F5. This is my first success report, so please let me know if you need additional information on the board. Best regards -- Erik H. Bakke __________________________________________________________________________________ Find local businesses and services in your area with Yahoo!7 Local. Get started: http://local.yahoo.com.au

1 0

[PATCH] Fix compilation on Nexenta (Ubuntu/Solaris)
by Carl-Daniel Hailfinger 17 Aug '09

17 Aug '09

Fix compilation on Nexenta which is Ubuntu with a Solaris kernel. This is 0.9.1 material. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-nexenta/Makefile =================================================================== --- flashrom-nexenta/Makefile (Revision 684) +++ flashrom-nexenta/Makefile (Arbeitskopie) @@ -70,7 +70,10 @@ ifeq ($(CONFIG_SERPROG), yes) FEATURE_CFLAGS += -D'SERPROG_SUPPORT=1' OBJS += serprog.o +ifeq ($(OS_ARCH), SunOS) +LIBS += -lsocket endif +endif FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'FT2232_SPI_SUPPORT=1'") Index: flashrom-nexenta/README =================================================================== --- flashrom-nexenta/README (Revision 684) +++ flashrom-nexenta/README (Arbeitskopie) @@ -43,7 +43,7 @@ * pciutils * pciutils-devel / pciutils-dev / libpci-dev - * zlib-devel / zlib1g-dev + * zlib-devel / zlib1g-dev (only needed if libpci is static) On FreeBSD, you need the following ports: @@ -58,15 +58,18 @@ gmake +To compile on Nexenta, use: + + make + To compile on Solaris, use: - gmake LDFLAGS="-L$pathtolibpci -lpci -lz" CC="gcc -I$pathtopciheaders" \ - CFLAGS=-O2 + gmake LDFLAGS="-L$pathtolibpci" CC="gcc -I$pathtopciheaders" CFLAGS=-O2 To compile on DragonFly BSD, use: ln -s /usr/pkg/include/pciutils pci - gmake CFLAGS=-I. LDFLAGS="-L/usr/pkg/lib -lpci -lz" + gmake CFLAGS=-I. LDFLAGS="-L/usr/pkg/lib" To compile and run on Darwin/Mac OS X: -- http://www.hailfinger.org/

2 2

[commit] r686 - trunk
by svn＠flashrom.org 17 Aug '09

17 Aug '09

Author: hailfinger Date: 2009-08-17 18:30:53 +0200 (Mon, 17 Aug 2009) New Revision: 686 Modified: trunk/Makefile trunk/README Log: Fix compilation on Nexenta which is Ubuntu with a Solaris kernel. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/Makefile =================================================================== --- trunk/Makefile 2009-08-13 23:23:37 UTC (rev 685) +++ trunk/Makefile 2009-08-17 16:30:53 UTC (rev 686) @@ -70,7 +70,10 @@ ifeq ($(CONFIG_SERPROG), yes) FEATURE_CFLAGS += -D'SERPROG_SUPPORT=1' OBJS += serprog.o +ifeq ($(OS_ARCH), SunOS) +LIBS += -lsocket endif +endif FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'FT2232_SPI_SUPPORT=1'") Modified: trunk/README =================================================================== --- trunk/README 2009-08-13 23:23:37 UTC (rev 685) +++ trunk/README 2009-08-17 16:30:53 UTC (rev 686) @@ -43,7 +43,7 @@ * pciutils * pciutils-devel / pciutils-dev / libpci-dev - * zlib-devel / zlib1g-dev + * zlib-devel / zlib1g-dev (only needed if libpci is static) On FreeBSD, you need the following ports: @@ -58,15 +58,18 @@ gmake +To compile on Nexenta, use: + + make + To compile on Solaris, use: - gmake LDFLAGS="-L$pathtolibpci -lpci -lz" CC="gcc -I$pathtopciheaders" \ - CFLAGS=-O2 + gmake LDFLAGS="-L$pathtolibpci" CC="gcc -I$pathtopciheaders" CFLAGS=-O2 To compile on DragonFly BSD, use: ln -s /usr/pkg/include/pciutils pci - gmake CFLAGS=-I. LDFLAGS="-L/usr/pkg/lib -lpci -lz" + gmake CFLAGS=-I. LDFLAGS="-L/usr/pkg/lib" To compile and run on Darwin/Mac OS X:

1 0

[PATCH] ICH6+ FWH IDSEL override
by Carl-Daniel Hailfinger 17 Aug '09

17 Aug '09

Allow the user to override FWH IDSEL on ICH6 and later. Usage: flashrom -p internal=fwh_idsel=0 Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-ich6_fwh_idsel/chipset_enable.c =================================================================== --- flashrom-ich6_fwh_idsel/chipset_enable.c (Revision 683) +++ flashrom-ich6_fwh_idsel/chipset_enable.c (Arbeitskopie) @@ -203,6 +203,7 @@ { uint32_t fwh_conf; int i; + char *idsel = NULL; /* Ignore all legacy ranges below 1 MB. */ /* FWH_SEL1 */ @@ -232,6 +233,19 @@ (0xff0 + i) * 0x100000, (fwh_conf >> i) & 0x1 ? "en" : "dis"); + if (programmer_param) + idsel = strstr(programmer_param, "fwh_idsel="); + + if (idsel) { + idsel += strlen("fwh_idsel="); + fwh_conf = (uint32_t)strtoul(idsel, NULL, 0); + + /* FIXME: Need to undo this on shutdown. */ + printf("\nSetting IDSEL=0x%x for top 16 MB", fwh_conf); + pci_write_long(dev, 0xd0, fwh_conf); + pci_write_word(dev, 0xd4, fwh_conf); + } + return enable_flash_ich(dev, name, 0xdc); } -- http://www.hailfinger.org/

3 6

[commit] r685 - trunk
by svn＠flashrom.org 14 Aug '09

14 Aug '09

Author: hailfinger Date: 2009-08-14 01:23:37 +0200 (Fri, 14 Aug 2009) New Revision: 685 Modified: trunk/chipset_enable.c Log: Allow the user to override FWH IDSEL on ICH6 and later. Usage: flashrom -p internal=fwh_idsel=0 Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Log: flashrom v0.9.0-r670 coreboot table found at 0xcf7f3c00. Vendor ID: KONTRON, part ID: 986LCD-M Found chipset "Intel ICH7/ICH7R", enabling flash write... Setting IDSEL=0 for top 8 MBOK. This chipset supports the following protocols: LPC,FWH. Disabling flash write protection for board "Kontron 986LCD-M"... OK. Calibrating delay loop... OK. Found chip "SST SST49LF016C" (2048 KB, FWH) at physical address 0xffe00000. No operations were specified. Acked-by: Chris Kinney <cmkinne(a)sandia.gov> Modified: trunk/chipset_enable.c =================================================================== --- trunk/chipset_enable.c 2009-08-13 11:38:44 UTC (rev 684) +++ trunk/chipset_enable.c 2009-08-13 23:23:37 UTC (rev 685) @@ -203,6 +203,7 @@ { uint32_t fwh_conf; int i; + char *idsel = NULL; /* Ignore all legacy ranges below 1 MB. */ /* FWH_SEL1 */ @@ -232,6 +233,19 @@ (0xff0 + i) * 0x100000, (fwh_conf >> i) & 0x1 ? "en" : "dis"); + if (programmer_param) + idsel = strstr(programmer_param, "fwh_idsel="); + + if (idsel) { + idsel += strlen("fwh_idsel="); + fwh_conf = (uint32_t)strtoul(idsel, NULL, 0); + + /* FIXME: Need to undo this on shutdown. */ + printf("\nSetting IDSEL=0x%x for top 16 MB", fwh_conf); + pci_write_long(dev, 0xd0, fwh_conf); + pci_write_word(dev, 0xd4, fwh_conf); + } + return enable_flash_ich(dev, name, 0xdc); }

1 0

Re: [flashrom] flashrom compatibility
by Carl-Daniel Hailfinger 13 Aug '09

13 Aug '09

Hi James. On 13.08.2009 16:39, James Li wrote: > Is flashrom utility executable inside QNX4 environment ? > I do not know, but can you test if it compiles in QNX4? If it does not compile, we can work with you to add QNX4 support. flashrom needs: - physical RAM access (/dev/mem on Linux) - I/O port access (inb/outb) - MSR access for GeodeLX boards Regards, Carl-Daniel -- http://www.hailfinger.org/

1 0

flashrom compatibility
by James Li 13 Aug '09

13 Aug '09

Hi, Is flashrom utility executable inside QNX4 environment ? Thanks

1 0

[PATCH] Only list available programers in usage()
by Carl-Daniel Hailfinger 13 Aug '09

13 Aug '09

Generate the usage message by walking the list of available programmers. This makes sure compiled out programmers are not listed. Tested, usage output is identical to the hardcoded variant. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-programmer_usagemessage/flashrom.c =================================================================== --- flashrom-programmer_usagemessage/flashrom.c (Revision 680) +++ flashrom-programmer_usagemessage/flashrom.c (Arbeitskopie) @@ -486,6 +486,11 @@ void usage(const char *name) { + const char *pname; + int pnamelen; + int remaining = 0; + enum programmer p; + printf("usage: %s [-VfLzhR] [-E|-r file|-w file|-v file] [-c chipname]\n" " [-m [vendor:]part] [-l file] [-i image] [-p programmer]\n\n", name); @@ -508,9 +513,33 @@ " -i | --image <name>: only flash image name from flash layout\n" " -L | --list-supported: print supported devices\n" " -z | --list-supported-wiki: print supported devices in wiki syntax\n" - " -p | --programmer <name>: specify the programmer device\n" - " (internal, dummy, nic3com, satasii,\n" - " it87spi, ft2232spi, serprog)\n" + " -p | --programmer <name>: specify the programmer device"); + + for (p = 0; p < PROGRAMMER_INVALID; p++) { + pname = programmer_table[p].name; + pnamelen = strlen(pname); + if (remaining - pnamelen - 2 < 0) { + printf("\n "); + remaining = 43; + } else { + printf(" "); + remaining--; + } + if (p == 0) { + printf("("); + remaining--; + } + printf("%s", pname); + remaining -= pnamelen; + if (p < PROGRAMMER_INVALID - 1) { + printf(","); + remaining--; + } else { + printf(")\n"); + } + } + + printf( " -h | --help: print this help text\n" " -R | --version: print the version (release)\n" "\nYou can specify one of -E, -r, -w, -v or no operation. If no operation is\n" -- http://www.hailfinger.org/

2 3

[commit] r684 - trunk
by svn＠flashrom.org 13 Aug '09

13 Aug '09

Author: hailfinger Date: 2009-08-13 13:38:44 +0200 (Thu, 13 Aug 2009) New Revision: 684 Modified: trunk/flashrom.c Log: Generate the usage message by walking the list of available programmers. This makes sure compiled out programmers are not listed. Tested, usage output is identical to the hardcoded variant. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/flashrom.c =================================================================== --- trunk/flashrom.c 2009-08-12 18:25:24 UTC (rev 683) +++ trunk/flashrom.c 2009-08-13 11:38:44 UTC (rev 684) @@ -488,6 +488,11 @@ void usage(const char *name) { + const char *pname; + int pnamelen; + int remaining = 0; + enum programmer p; + printf("usage: %s [-VfLzhR] [-E|-r file|-w file|-v file] [-c chipname]\n" " [-m [vendor:]part] [-l file] [-i image] [-p programmer]\n\n", name); @@ -510,9 +515,33 @@ " -i | --image <name>: only flash image name from flash layout\n" " -L | --list-supported: print supported devices\n" " -z | --list-supported-wiki: print supported devices in wiki syntax\n" - " -p | --programmer <name>: specify the programmer device\n" - " (internal, dummy, nic3com, satasii,\n" - " it87spi, ft2232spi, serprog)\n" + " -p | --programmer <name>: specify the programmer device"); + + for (p = 0; p < PROGRAMMER_INVALID; p++) { + pname = programmer_table[p].name; + pnamelen = strlen(pname); + if (remaining - pnamelen - 2 < 0) { + printf("\n "); + remaining = 43; + } else { + printf(" "); + remaining--; + } + if (p == 0) { + printf("("); + remaining--; + } + printf("%s", pname); + remaining -= pnamelen; + if (p < PROGRAMMER_INVALID - 1) { + printf(","); + remaining--; + } else { + printf(")\n"); + } + } + + printf( " -h | --help: print this help text\n" " -R | --version: print the version (release)\n" "\nYou can specify one of -E, -r, -w, -v or no operation. If no operation is\n"

1 0

[commit] r683 - trunk
by svn＠flashrom.org 12 Aug '09

12 Aug '09

Author: stepan Date: 2009-08-12 20:25:24 +0200 (Wed, 12 Aug 2009) New Revision: 683 Modified: trunk/board_enable.c Log: oops. MSR accesses in board specific code. I missed those. Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/board_enable.c =================================================================== --- trunk/board_enable.c 2009-08-12 16:58:11 UTC (rev 682) +++ trunk/board_enable.c 2009-08-12 18:25:24 UTC (rev 683) @@ -495,51 +495,29 @@ #define DBE6x_BOOT_LOC_FLASH (2) #define DBE6x_BOOT_LOC_FWHUB (3) - unsigned long msr[2]; - int msr_fd; + msr_t msr; unsigned long boot_loc; - msr_fd = open("/dev/cpu/0/msr", O_RDWR); - if (msr_fd == -1) { - perror("open /dev/cpu/0/msr"); + /* Geode only has a single core */ + if (setup_cpu_msr(0)) return -1; - } - if (lseek(msr_fd, DBE6x_MSR_DIVIL_BALL_OPTS, SEEK_SET) == -1) { - perror("lseek"); - close(msr_fd); - return -1; - } + msr = rdmsr(DBE6x_MSR_DIVIL_BALL_OPTS); - if (read(msr_fd, (void *)msr, 8) != 8) { - perror("read"); - close(msr_fd); - return -1; - } - - if ((msr[0] & (DBE6x_BOOT_OP_LATCHED)) == + if ((msr.lo & (DBE6x_BOOT_OP_LATCHED)) == (DBE6x_BOOT_LOC_FWHUB << DBE6x_BOOT_OP_LATCHED_SHIFT)) boot_loc = DBE6x_BOOT_LOC_FWHUB; else boot_loc = DBE6x_BOOT_LOC_FLASH; - msr[0] &= ~(DBE6x_PRI_BOOT_LOC | DBE6x_SEC_BOOT_LOC); - msr[0] |= ((boot_loc << DBE6x_PRI_BOOT_LOC_SHIFT) | + msr.lo &= ~(DBE6x_PRI_BOOT_LOC | DBE6x_SEC_BOOT_LOC); + msr.lo |= ((boot_loc << DBE6x_PRI_BOOT_LOC_SHIFT) | (boot_loc << DBE6x_SEC_BOOT_LOC_SHIFT)); - if (lseek(msr_fd, DBE6x_MSR_DIVIL_BALL_OPTS, SEEK_SET) == -1) { - perror("lseek"); - close(msr_fd); - return -1; - } + wrmsr(DBE6x_MSR_DIVIL_BALL_OPTS, msr); - if (write(msr_fd, (void *)msr, 8) != 8) { - perror("write"); - close(msr_fd); - return -1; - } + cleanup_cpu_msr(); - close(msr_fd); return 0; }

1 0

← Newer
1
...
6
7
8
9
10
11
12
13
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom August 2009