Hi!
I have a P4-M266 AMPTRON motherboard. It's not supported by flashrom-0.9.1. It has SST(MPF)39SF020A. The board looks like this: http://www.motherboard.cz/mb/amptron/P4-M266A.htm
The wiki page says, flashrom supports PM266 - Albatron. It looks like: http://www.motherboard.cz/mb/albatron/PM266A.htm
I attached the "./flashrom" output, and an "lspi -v -v" output.
I hope, this helps for You. I have another motherboards, which are not supported.
Thanks for Your reply, Gabor Szogyenyi
--------------------------Hirdetés-----------------------------
Kötelező biztosítási díjak 2010
Számolja ki és váltson kedvezőbbre!
On Mon, Nov 16, 2009 at 02:29:58PM +0100, Sz??gyényi Gábor wrote:
Hi!
I have a P4-M266 AMPTRON motherboard. It's not supported by flashrom-0.9.1. It has SST(MPF)39SF020A. The board looks like this: http://www.motherboard.cz/mb/amptron/P4-M266A.htm
The wiki page says, flashrom supports PM266 - Albatron. It looks like: http://www.motherboard.cz/mb/albatron/PM266A.htm
I attached the "./flashrom" output, and an "lspi -v -v" output.
I hope, this helps for You. I have another motherboards, which are not supported.
Thanks for Your reply, Gabor Szogyenyi
This board supposedly is supported already, but your lspci does not seem to match the match in the table.
Please provide the output of lspci -vvnnxxx
Luc Verhaegen.