[PATCH] README: mention all the drivers that should be disabled on non-x86

[Paul Fertser]

Currently README mentions some but not all options needed to get
flashrom compiled on a libpci-less system. This patch adds all of
them.

Signed-off-by: Paul Fertser 
---
 README |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/README b/README
index f88b3b5..88cc782 100644
--- a/README
+++ b/README
@@ -120,8 +120,9 @@ Processor architecture dependent features:

On non-x86 architectures you have to disable a few programmers because they
  use port-based I/O which is not directly available on non-x86. Please add
- CONFIG_RAYER_SPI=no CONFIG_NIC3COM=no CONFIG_ATAHPT=no CONFIG_NICREALTEK=no \
- CONFIG_NICNATSEMI=no
+ CONFIG_RAYER_SPI=no CONFIG_NIC3COM=no CONFIG_GFXNVIDIA=no CONFIG_SATASII=no \
+ CONFIG_ATAHPT=no CONFIG_DRKAISER=no CONFIG_NICREALTEK=no CONFIG_NICNATSEMI=no \
+ CONFIG_NICINTEL=no CONFIG_NICINTEL_SPI=no CONFIG_OGP_SPI=no CONFIG_SATAMV=no
  as parameters to the "make" invocation.
  Besides that, the internal programmer is only supported on x86 and MIPS. On
  other architectures, please add

[PATCH] README: mention all the drivers that should be disabled on non-x86

[Carl-Daniel Hailfinger]

Hi Paul,

thanks for your patch.

Am  2012-07-01 16:14:19 CEST schrieb Paul Fertser:
> Currently README mentions some but not all options needed to get
> flashrom compiled on a libpci-less system. This patch adds all of
> them.

AFAICS this section in the README is obsolete. All non-x86 programmers
should be disabled by default if you simply run "make" on any non-x86
platform.
If auto-disabling such programmers is broken on non-x86, we need to fix
that.
> Signed-off-by: Paul Fertser
>
> README |    5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/README b/README
> index f88b3b5..88cc782 100644
> --- a/README
> +++ b/README
> @@ -120,8 +120,9 @@ Processor architecture dependent features:
>
> On non-x86 architectures you have to disable a few programmers because they
>   use port-based I/O which is not directly available on non-x86. Please add
> CONFIG_RAYER_SPI=no CONFIG_NIC3COM=no CONFIG_ATAHPT=no CONFIG_NICREALTEK=no \
> CONFIG_NICNATSEMI=no
> CONFIG_RAYER_SPI=no CONFIG_NIC3COM=no CONFIG_GFXNVIDIA=no CONFIG_SATASII=no \
> CONFIG_ATAHPT=no CONFIG_DRKAISER=no CONFIG_NICREALTEK=no CONFIG_NICNATSEMI=no \
> CONFIG_NICINTEL=no CONFIG_NICINTEL_SPI=no CONFIG_OGP_SPI=no CONFIG_SATAMV=no
> as parameters to the "make" invocation.
> Besides that, the internal programmer is only supported on x86 and MIPS. On
> other architectures, please add

Regards,
Carl-Daniel