Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at --- wbsio_spi.c | 136 +++++++++++++++++++++++++++++++++-------------------------- 1 file changed, 77 insertions(+), 59 deletions(-)
diff --git a/wbsio_spi.c b/wbsio_spi.c index 7d4bb2a..778b983 100644 --- a/wbsio_spi.c +++ b/wbsio_spi.c @@ -61,6 +61,53 @@ done: return flashport; }
+/* W83627DHG has 11 command modes: + * 1=1 command only + * 2=1 command+1 data write + * 3=1 command+2 data read + * 4=1 command+3 address + * 5=1 command+3 address+1 data write + * 6=1 command+3 address+4 data write + * 7=1 command+3 address+1 dummy address inserted by wbsio+4 data read + * 8=1 command+3 address+1 data read + * 9=1 command+3 address+2 data read + * a=1 command+3 address+3 data read + * b=1 command+3 address+4 data read + * + * mode[7:4] holds the command mode + * mode[3:0] holds SPI address bits [19:16] + * + * The Winbond SPI master only supports 20 bit addresses on the SPI bus. :\ + * Would one more byte of RAM in the chip (to get all 24 bits) really make + * such a big difference? + */ +static uint8_t determine_mode(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr) +{ + if (1 == writecnt && 0 == readcnt) { + return 0x10; + } else if (2 == writecnt && 0 == readcnt) { + return 0x20; + } else if (1 == writecnt && 2 == readcnt) { + return 0x30; + } else if (4 == writecnt && 0 == readcnt) { + return 0x40 | (writearr[1] & 0x0f); + } else if (5 == writecnt && 0 == readcnt) { + return 0x50 | (writearr[1] & 0x0f); + } else if (8 == writecnt && 0 == readcnt) { + return 0x60 | (writearr[1] & 0x0f); + } else if (5 == writecnt && 4 == readcnt) { + /* XXX: TODO not supported by flashrom infrastructure! + * This mode, 7, discards the fifth byte in writecnt, + * but since we can not express that in flashrom, fail + * the operation for now. + */; + } else if (4 == writecnt && readcnt >= 1 && readcnt <= 4) { + return ((7 + readcnt) << 4) | (writearr[1] & 0x0f); + } + return 0; +} + static int wbsio_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, @@ -95,52 +142,37 @@ int wbsio_check_for_spi(void) return 0; }
-/* W83627DHG has 11 command modes: - * 1=1 command only - * 2=1 command+1 data write - * 3=1 command+2 data read - * 4=1 command+3 address - * 5=1 command+3 address+1 data write - * 6=1 command+3 address+4 data write - * 7=1 command+3 address+1 dummy address inserted by wbsio+4 data read - * 8=1 command+3 address+1 data read - * 9=1 command+3 address+2 data read - * a=1 command+3 address+3 data read - * b=1 command+3 address+4 data read - * - * mode[7:4] holds the command mode - * mode[3:0] holds SPI address bits [19:16] - * - * The Winbond SPI master only supports 20 bit addresses on the SPI bus. :\ - * Would one more byte of RAM in the chip (to get all 24 bits) really make - * such a big difference? - */ static int wbsio_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { int i; - uint8_t mode = 0; + uint8_t mode = determine_mode(flash, writecnt, readcnt, writearr);
- msg_pspew("%s:", __func__); + if (!mode) { + msg_perr("%s: unsupported command type wr=%d rd=%d\n", + __func__, writecnt, readcnt); + /* Command type refers to the number of bytes read/written. */ + return SPI_INVALID_LENGTH; + }
- if (1 == writecnt && 0 == readcnt) { - mode = 0x10; - } else if (2 == writecnt && 0 == readcnt) { + msg_pspew(" cmd=%02x mode=%02x\n", writearr[0], mode); + switch (mode & 0xF0) { + case 0x10: break; + case 0x20: OUTB(writearr[1], wbsio_spibase + 4); msg_pspew(" data=0x%02x", writearr[1]); - mode = 0x20; - } else if (1 == writecnt && 2 == readcnt) { - mode = 0x30; - } else if (4 == writecnt && 0 == readcnt) { + break; + case 0x30: break; + case 0x40: msg_pspew(" addr=0x%02x", (writearr[1] & 0x0f)); for (i = 2; i < writecnt; i++) { OUTB(writearr[i], wbsio_spibase + i); msg_pspew("%02x", writearr[i]); } - mode = 0x40 | (writearr[1] & 0x0f); - } else if (5 == writecnt && 0 == readcnt) { + break; + case 0x50: msg_pspew(" addr=0x%02x", (writearr[1] & 0x0f)); for (i = 2; i < 4; i++) { OUTB(writearr[i], wbsio_spibase + i); @@ -148,8 +180,8 @@ static int wbsio_spi_send_command(struct flashctx *flash, unsigned int writecnt, } OUTB(writearr[i], wbsio_spibase + i); msg_pspew(" data=0x%02x", writearr[i]); - mode = 0x50 | (writearr[1] & 0x0f); - } else if (8 == writecnt && 0 == readcnt) { + break; + case 0x60: msg_pspew(" addr=0x%02x", (writearr[1] & 0x0f)); for (i = 2; i < 4; i++) { OUTB(writearr[i], wbsio_spibase + i); @@ -160,44 +192,30 @@ static int wbsio_spi_send_command(struct flashctx *flash, unsigned int writecnt, OUTB(writearr[i], wbsio_spibase + i); msg_pspew("%02x", writearr[i]); } - mode = 0x60 | (writearr[1] & 0x0f); - } else if (5 == writecnt && 4 == readcnt) { - /* XXX: TODO not supported by flashrom infrastructure! - * This mode, 7, discards the fifth byte in writecnt, - * but since we can not express that in flashrom, fail - * the operation for now. - */ - ; - } else if (4 == writecnt && readcnt >= 1 && readcnt <= 4) { + break; + case 0x70: /* unimplemented */ + break; + default: msg_pspew(" addr=0x%02x", (writearr[1] & 0x0f)); for (i = 2; i < writecnt; i++) { OUTB(writearr[i], wbsio_spibase + i); msg_pspew("%02x", writearr[i]); } - mode = ((7 + readcnt) << 4) | (writearr[1] & 0x0f); - } - msg_pspew(" cmd=%02x mode=%02x\n", writearr[0], mode); - - if (!mode) { - msg_perr("%s: unsupported command type wr=%d rd=%d\n", - __func__, writecnt, readcnt); - /* Command type refers to the number of bytes read/written. */ - return SPI_INVALID_LENGTH; + break; }
OUTB(writearr[0], wbsio_spibase); OUTB(mode, wbsio_spibase + 1); programmer_delay(10);
- if (!readcnt) - return 0; - - msg_pspew("%s: returning data =", __func__); - for (i = 0; i < readcnt; i++) { - readarr[i] = INB(wbsio_spibase + 4 + i); - msg_pspew(" 0x%02x", readarr[i]); + if (readcnt > 0) { + msg_pspew("%s: returning data =", __func__); + for (i = 0; i < readcnt; i++) { + readarr[i] = INB(wbsio_spibase + 4 + i); + msg_pspew(" 0x%02x", readarr[i]); + } + msg_pspew("\n"); } - msg_pspew("\n"); return 0; }
-
Stefan Tauner