[Fwd: Re: Is K7S6A supported by flashrom? 2nd Reply.]

[Carl-Daniel Hailfinger]

forwarded.

-------- Original Message --------
Subject: 	Re: [flashrom] Is K7S6A supported by flashrom? 2nd Reply.
Date: 	Wed, 14 Oct 2009 19:33:44 +0100
From: 	spirals 
To: 	Carl-Daniel Hailfinger 
References: 	

Hi Carl-Daniel, Have just restarted after a full covers off eye-ball of 
the board is definatly is the K&S6A (v1.0) board, pene also looked (my 
eyes are not as good as they were) and she confirmed 1.0 and _/*not 
1.0A*/_ regards, (dja.)

Carl-Daniel Hailfinger wrote:
> Hi Dave,
>
> On 13.10.2009 21:53, David J Aldridge wrote:
> > Ran flashrom and it reports "No EEPROM/flash device found", same with 
> > -m ecs:k7s5a.
>
> Please send the output of "flashrom -V", "lspci -nnvvvxxx", "superiotool
> -dV" and if tell us if your board is
> K7S6A (V1.0)
> or
> K7S6A (V1.0A)
>
> Luc: BIOS downloads are here (not sure which PCB is the one Dave has):
> http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&am...
> http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=238&a...
>
> Regards,
> Carl-Daniel